검색결과
-
[특집-기술위원회] TC 126 - 담배 및 담배제품(Tobacco and tobacco products)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 등이다.△1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111, △1964년 TC 112~TC 115, TC 117, △1965년 TC 118, △1966년 TC 119~TC 122, △1967년 TC 123 등도 포함된다.ISO/TC 126 담배 및 담배제품(Tobacco and tobacco products)과 관련된 기술위원회는 1968년 결성됐다. 사무국은 독일표준화협회(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다.위원회는 줄리안 정(Mrs Juliane Jung)가 책임지고 있다. 현재 의장은 울프디터 헬러(Mr Prof. Dr Wolf-Dieter Heller)로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 타마호 타카이(Ms Tamaho Takai), ISO 편집 관리자는 마사 카산토산(Mrs Martha Casantosan) 등으로 조사됐다.범위는 △분류, 정의 및 용어 △재료 및 특성 △치수 및 공차 △계산 방법을 포함한 테스트 및 품질 관리 방법 등에 대한 플레인 베어링의 표준화다.비제조 담배, 모든 종류의 담배 제품, 담배 제품 제조에 사용되는 재료 및 환경적 담배 연기 측면을 포함한 담배 연기에 대한 용어 및 시험 방법의 표준화다. 취급, 보관, 포장 및 운송에 대한 사양과 질문이 적절하게 포함됐다.담배 제품이란 인간이 사용하도록 의도된 담배로 제조되거나 파생된 모든 제품 및 흡연 또는 무연 제품과 유사한 방식으로 사용되는 제품을 의미한다.현재 ISO/TC 126 사무국과 관련해 발행된 표준은 96개며 ISO/TC 126 사무국의 직접적인 책임하에 발행한 표준은 65개다.ISO/TC 126 사무국과 관련해 개발 중인 표준은 11개며 ISO/TC 126 사무국의 직접적인 책임 하에 개발 중인 표준은 9개다. 참여하고 있는 회원은 30개국, 참관 회원은 35개국이다.□ ISO/TC 126 사무국 분과위원회(Subcommittee)의 책임 하에 발행된 표준 65개 중 15개 목록▷ISO 2881:1992 Tobacco and tobacco products — Determination of alkaloid content — Spectrometric method▷ISO 3308:2012 Routine analytical cigarette-smoking machine — Definitions and standard conditions▷ISO 3400:1997 Cigarettes — Determination of alkaloids in smoke condensates — Spectrometric method▷ISO 3400:1997/Amd 1:2009 Cigarettes — Determination of alkaloids in smoke condensates — Spectrometric method — Amendment 1▷ISO 3401:1991 Cigarettes — Determination of alkaloid retention by the filters — Spectrometric method▷ISO 3402:2023 Tobacco and tobacco products — Atmosphere for conditioning and testing▷ISO 4387:2019 Cigarettes — Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine▷ISO 4388:1991 Cigarettes — Determination of the smoke condensate retention index of a filter — Direct spectrometric method▷ISO 4389:2000 Tobacco and tobacco products — Determination of organochlorine pesticide residues — Gas chromatographic method▷ISO 6466:1983 Tobacco and tobacco products — Determination of dithiocarbamate pesticides residues — Molecular absorption spectrometric method▷ISO 6488:2021 Tobacco and tobacco products — Determination of water content — Karl Fischer method▷ISO 8243:2013 Cigarettes — Sampling▷ISO 8454:2007 Cigarettes — Determination of carbon monoxide in the vapour phase of cigarette smoke — NDIR method▷ISO 8454:2007/Amd 1:2009 Cigarettes — Determination of carbon monoxide in the vapour phase of cigarette smoke — NDIR method — Amendment 1▷ISO 8454:2007/Amd 2:2019 Cigarettes — Determination of carbon monoxide in the vapour phase of cigarette smoke — NDIR method — Amendment 2□ ISO/TC 126 사무국 분과위원회(Subcommittee)의 책임 하에 개발 중인 표준 9개 목록▷ISO/DIS 5501-1 Tobacco heating systems — Definitions and standard conditions for aerosol generation and collection — Part 1: Electrically Heated Tobacco Products (eHTPs)▷ISO/DIS 5501-2 Tobacco heating systems — Definitions and standard conditions for aerosol generation and collection — Part 2: Aerosol Heated Tobacco Products (aHTPs)▷ISO/DIS 5501-3 Tobacco heating systems — Definitions and standard conditions for aerosol generation and collection — Part 3: Carbon Heated Tobacco Products (cHTPs)▷ISO/AWI 5622 Tobacco heating systems — Carbon monoxide▷ISO/DIS 6080 Tobacco heating systems — Terms and definitions▷ISO/DIS 8454 Cigarettes — Determination of carbon monoxide in the vapour phase of cigarette smoke — NDIR method▷ISO 9322 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products — Determination of acetate and citrate content — Ion chromatographic method▷ISO/AWI 21109 Nicotine pouches — Test method for pH▷ISO/AWI 21114 Nicotine pouches — Test method for nicotine content□ ISO/TC 126 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 126/SC 1 Physical and dimensional tests ; 발행된 표준 12개, 개발 중인 표준 1개▷ISO/TC 126/SC 2 Leaf tobacco ; 발행된 표준 14개, 개발 중인 표준 0개▷ISO/TC 126/SC 3 Vape and vapour products ; 발행된 표준 5개, 개발 중인 표준 1개□ ISO/TC 126 사무국의 작업그룹(Working Group, WG) 현황▷ISO/TC 126/WG 19 Revision of ISO 15592-3▷ISO/TC 126/WG 22 Tobacco heating systems▷ISO/TC 126/WG 23 Revision of ISO 3402▷ISO/TC 126/WG 24 Nicotine pouches
-
[특집-ISO/IEC JTC 1/SC 17 활동] ⑥Text for CIB : ISO/IEC PDTS 18013-6: Personal identification — ISO-compliant driving licence — Part 6: mDL test methods 소개지난 10월3일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Text for CIB : ISO/IEC PDTS 18013-6: Personal identification — ISO-compliant driving licence — Part 6: mDL test methods' 관련 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안 장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이다. 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서는 'Text for CIB : ISO/IEC PDTS 18013-6: Personal identification — ISO-compliant driving licence — Part 6: mDL test methods'이다.이 문서는 ISO 국제 표준은 아니며 검토 및 의견을 듣기 위해 배포된 문서다. 예고 없이 변경될 수 있으며 국제 표준으로 언급되지 않을 수 있다. 국제 표준 초안의 모델 원고는 https://www.iso.org/iso/model_document-rice_model.pdf에서 확인할 수 있다.ISO/IEC 18013은 사람이 읽을 수 있는 기능(ISO/IEC 18013-1)과 관련 ISO 준수 운전 면허증(ISO-compliant driving licence, IDL)의 디자인 형식 및 데이터 콘텐츠에 대한 지침을 설정하고 있다.또한 ISO 기계 판독 가능 기술(ISO/IEC 18013-2), 액세스 제어, 인증 및 무결성 검증(ISO/IEC 18013-3), 관련 테스트 방법(ISO/IEC 18013-4), 모바일 장치에서 ISO 준수 운전 면허증(IDL) 기능을 활성화하기 위한 인터페이스 및 관련 요구 사항(ISO/IEC 18013-5) 등에 관한 지침도 포함하고 있다.개별 국가·주가 개인 정보 보호 규칙을 적용하는 데 방해가 되지 않고 국가·공동체·지역 자동차 당국이 특정 요구 사항을 처리하는 데 방해가 되지 않으면서 IDL의 국제적 사용 및 상호 인식을 위한 공통 기반을 마련히는데 있다.ISO/IEC 18013-5:2021은 모바일 장치와 관련된 운전 면허증 구현을 위한 인터페이스 사양을 설정한다. 모바일 운전면허증(mDL)과 mDL 리더기 간의 인터페이스, mDL 리더기와 발급기관 인프라 간의 인터페이스를 명시하고 있다.이 문서는 ISO/IEC 18013-5의 요구 사항에 따라 모바일 운전 애플리케이션의 데이터 모델, 장치 연결, 데이터 전송 및 보안 메커니즘의 적합성을 테스트하기 위한 요구 사항을 규정한다.개인 식별 - ISO 준수 운전 면허증 - 파트 6:mDL 테스트 방법(Personal identification — ISO-compliant driving licence — Part 6:mDL test methods )의 범위는 다음과 같다.□ 범위이 문서는 ISO/IEC 18013-5:2021과 관련한 mDL 또는 mDL 리더의 적합성을 테스트하기 위한 테스트 방법을 지정하고 있다.△mDL 리더에 대한 인터페이스의 mDL 테스트 방법 △mDL 인터페이스에 있는 mDL 리더 테스트 방법 △발급기관 인프라에 대한(선택적) 인터페이스의 mDL 판독기 테스트 방법 등을 지정하고 있다. 단, mDL 판독기와 인터페이스에 대한 발급기관 인프라에 대한 테스트 사례는 포함돼 있지 않다.□ 문서의 목차 안내ContentsForewordIntroduction1 Scope2 Normative references3 Terms and definitions4 Abbreviated terms5 Conformance6 Test design6.1 General6.2 Test case hierarchy6.2.1 Structure6.2.2 System under test6.2.3 Test layers, test areas, test groups and test units6.2.4 Test cases6.3 Test administration6.3.1 Preconditions for testing of an mDL6.3.2 Preconditions for testing of an mDL reader6.3.3 Implementation conformance statements6.3.4 Test report7 mDL conformity test methods8 mDL reader conformity test methodsAnnex A (Normative) Test case hierarchiesA.1 mDA.2 mDL readerA.3 CertificatesA.4 CommonAnnex B (Normative) Implementation Conformance StatementsB.1 ICS for mDLB.1.1 Generic informationB.1.2 For mDL Data Model test casesB.1.3 For Technologies test casesB.1.4 For security mechanisms test casesB.1.5 For Use Case test casesB.2 ICS for mDL readersB.2.1 Generic informationB.2.2 For Technologies test casesB.2.3 For Security Mechanisms test casesB.3 ICS for CertificatesAnnex C (Normative) Test certificatesC.1 GeneralC.2 Certificates necessary for testing an mDLC.2.1 CA root certificatesC.2.1.1 CA_01C.2.1.2 CA_02C.2.1.3 CA_ revoked_CRL_01C.2.1.4 CA_ revoked_CRL_02C.2.2 mdoc reader authentication certificatesC.2.2.1 mdocReaderAuth_01C.2.2.2 mdocReaderAuth_02C.2.2.3 mdocReaderAuth_03C.2.2.4 mdocReaderAuth_04C.2.2.5 mdocReaderAuth_05C.2.2.6 mdocReaderAuth_06C.2.2.7 mdocReaderAuth_07C.2.2.8 mdocReaderAuth_08C.2.2.9 mdocReaderAuth_09C.2.2.10 mdocReaderAuth_revoked_CRL_01C.2.2.11 mdocReaderAuth_revoked_CRL_02C.2.2.12 mdocReaderAuth_revoked_CRL_03C.2.2.13 mdocReaderAuth_revoked_CRL_04C.2.2.14 mdocReaderAuth_revoked_CRL_05C.2.2.15 mdocReaderAuth_revoked_CRL_06C.2.2.16 mdocReaderAuth_revoked_CRL_07C.2.2.17 mdocReaderAuth_revoked_CRL_08C.2.2.18 mdocReaderAuth_revoked_CRL_09C.2.2.19 mdocReaderAuth_revoked_OCSP_01C.2.2.20 mdocReaderAuth_revoked_OCSP_02C.2.2.21 mdocReaderAuth_revoked_OCSP_03C.2.2.22 mdocReaderAuth_revoked_OCSP_04C.2.2.23 mdocReaderAuth_revoked_OCSP_05C.2.2.24 mdocReaderAuth_revoked_OCSP_06C.2.2.25 mdocReaderAuth_revoked_OCSP_07C.2.2.26 mdocReaderAuth_revoked_OCSP_08C.2.2.27 mdocReaderAuth_revoked_OCSP_09C.2.2.28 mdocReaderAuth_revoked_CA_01C.2.2.29 mdocReaderAuth_revoked_CA_02C.2.2.30 mdocReaderAuth_revoked_CA_03C.2.2.31 mdocReaderAuth_revoked_CA_04C.2.2.32 mdocReaderAuth_revoked_CA_05C.2.2.33 mdocReaderAuth_revoked_CA_06C.2.2.34 mdocReaderAuth_revoked_CA_07C.2.2.35 mdocReaderAuth_revoked_CA_08C.2.2.36 mdocReaderAuth_revoked_CA_09C.3 Certificates necessary for testing an mDL readerC.3.1 IACA root certificatesC.3.1.1 IACA_01C.3.1.2 IACA_02C.3.1.3 IACA _revoked_CRL_01C.3.2 DocumentSigner certificatesC.3.2.1 DocumentSigner_01C.3.2.2 DocumentSigner_02C.3.2.3 DocumentSigner_03C.3.2.4 DocumentSigner_04C.3.2.5 DocumentSigner_05C.3.2.6 DocumentSigner_06C.3.2.7 DocumentSigner_07C.3.2.8 DocumentSigner_08C.3.2.9 DocumentSigner_09C.3.2.10 DocumentSigner_revoked_CRL_01C.3.2.11 DocumentSigner_revoked_CA_01C.3.3 TLS Server certificatesC.3.3.1 TLSServer_01C.3.3.2 TLSServer_02C.3.3.3 TLSServer_03C.3.3.4 TLSServer_04C.3.3.5 TLSServer_05C.3.3.6 TLSServer_07C.3.3.7 TLSServer_revoked_CRL_01C.3.3.8 TLSServer_revoked_OCSP_01C.3.3.9 TLSServer_revoked_CA_01C.3.4 JWS certificatesC.3.4.1 JWS_01C.3.4.2 JWS_02C.3.4.3 JWS_03C.3.4.4 JWS _revoked_CRL_01C.3.4.5 JWS _revoked_CA_01Bibliography
-
[특집-기술위원회] TC 123 - 플레인 베어링(Plain bearings)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 등이다.△1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111, △1964년 TC 112~TC 115, TC 117, △1965년 TC 118, △1966년 TC 119~TC 122 등도 포함된다.ISO/TC 123 플레인 베어링(Plain bearings, 평(평면) 베어링)과 관련된 기술위원회는 1967년 결성됐다. 사무국은 일본산업표준조사회(日本産業標準調査会, Japanese Industrial Standards Committee, JISC)에서 맡고 있다.위원회는 아키라 야마다(Mr Akira Yamada)가 책임지고 있다. 현재 의장은 유지 미하라(Dr Yuji Mihara)로 임기는 2028년까지다.ISO 기술 프로그램 관리자는 츄안유 조우(Ms Chuanyu Zou), ISO 편집 관리자는 ISO 편집 팀(ISO Editing Team) 등으로 조사됐다.범위는 △분류, 정의 및 용어 △재료 및 특성 △치수 및 공차 △계산 방법을 포함한 테스트 및 품질 관리 방법 등에 대한 플레인 베어링의 표준화다.현재 ISO/TC 123 사무국과 관련해 발행된 표준은 87개며 ISO/TC 123 사무국과 관련해 개발 중인 표준은 10개다. 참여하고 있는 회원은 12개국, 참관 회원은 20개국이다.□ ISO/TC 123 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 123/SC 2 Materials and lubricants, their properties, characteristics, test methods and testing conditions ; 발행된 표준 25개, 개발 중인 표준 1개▷ISO/TC 123/SC 3 Dimensions, tolerances and construction details ; 발행된 표준 15개, 개발 중인 표준 3개▷ISO/TC 123/SC 5 Quality analysis and assurance ; 발행된 표준 10개, 개발 중인 표준 1개▷ISO/TC 123/SC 6 Terms and common items ; 발행된 표준 7개, 개발 중인 표준 4개▷ISO/TC 123/SC 7 Special types of plain bearings ; 발행된 표준 12개, 개발 중인 표준 1개▷ISO/TC 123/SC 8 Calculation methods for plain bearings and their applications ; 발행된 표준 18개, 개발 중인 표준 0개
-
[특집-기술위원회] TC 122 - 포장(Packaging)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 등이다.△1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111, △1964년 TC 112~TC 115, TC 117, △1965년 TC 118 등도 포함된다.ISO/TC 122 포장(Packaging)와 관련된 기술위원회는 TC 119, TC 120, TC 121과 마찬가지로 1966년에 결성됐다. 사무국은 일본산업표준조사회(日本産業標準調査会, Japanese Industrial Standards Committee, JISC)에서 맡고 있다.위원회는 아키라 시라쿠라(Mr Akira Shirakura)가 책임지고 있다. 현재 의장은 다케오 시이나(Dr Takeo Shiina)로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 모니카 이비도(Ms Monica Ibido), ISO 편집 관리자는 앤 기엣(Ms Anne Guiet) 등으로 조사됐다. 범위는 용어 및 정의, 특성, 성능 요구 사항 및 테스트와 관련된 포장 분야 및 포장 관련 기술의 활용 등에 관한 표준화다. 단, TC 6, TC 52, TC 104 등 특정 위원회 범위내에 속하는 문제들은 제외된다.현재 ISO/TC 122 사무국과 관련해 발행된 표준은 88개며 이중 직접적인 책임 하에 개발된 표준은 46개다. ISO/TC 122 사무국과 관련해 개발중인 표준은 11개며 직접적인 책임 하에 개발 중인 표준은 4개다. 참여하고 있는 회원은 31개국, 참관 회원은 48개국이다.□ ISO/TC 122 사무국의 직접적인 책임 하에 발행된 표준 46개 중 15개 목록▷ISO 780:2015 Packaging — Distribution packaging — Graphical symbols for handling and storage of packages▷ISO 3394:2012 Packaging — Complete, filled transport packages and unit loads — Dimensions of rigid rectangular packages▷ISO 3676:2012 Packaging — Complete, filled transport packages and unit loads — Unit load dimensions▷ISO 4178:1980 Complete, filled transport packages — Distribution trials — Information to be recorded▷ISO 6590-2:1986 Packaging — Sacks — Vocabulary and types — Part 2: Sacks made from thermoplastic flexible film▷ISO 6591-2:1985 Packaging — Sacks — Description and method of measurement — Part 2: Empty sacks made from thermoplastic flexible film▷ISO 7023:1983 Packaging — Sacks — Method of sampling empty sacks for testing▷ISO 7965-1:1984 Packaging — Sacks — Drop test — Part 1: Paper sacks▷ISO 7965-2:1993 Sacks — Drop test — Part 2: Sacks made from thermoplastic flexible film▷ISO 8351-2:1994 Packaging — Method of specification for sacks — Part 2: Sacks made from thermoplastic flexible film▷ISO 8367-2:1993 Packaging — Dimensional tolerances for general purpose sacks — Part 2: Sacks made from thermoplastic flexible film▷ISO 11156:2011 Packaging — Accessible design — General requirements▷ISO 11683:1997 Packaging — Tactile warnings of danger — Requirements▷ISO 11897:1999 Packaging — Sacks made from thermoplastic flexible film — Tear propagation on edge folds▷ISO 15119:2000 Packaging — Sacks — Determination of the friction of filled sacks□ ISO/TC 122 사무국의 직접적인 책임 하에 개발 중인 표준 4개 목록▷ISO/DIS 6608-1 Active and intelligent packaging — Part 1: General requirements and specifications of active packaging▷ISO/AWI TS 18617 Hand Hole Design Principles and Test Mehthods for Handheld Packages▷ISO/AWI 22742 Packaging — Linear bar code and two-dimensional symbols for product packaging▷ISO/AWI 28219 Packaging — Labelling and direct product marking with linear bar code and two-dimensional symbols□ ISO/TC 122 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 122/SC 3 Performance requirements and tests for means of packaging, packages and unit loads (as required by ISO/TC 122) ; 발행된 표준 32개, 개발 중인 표준 5개▷ISO/TC 122/SC 4 Packaging and the environment ; 발행된 표준 10개, 개발 중인 표준 2개□ ISO/TC 121 사무국 작업그룹(Working Group, WG)의 활동 현황▷ISO/TC 122/WG 5 Terminology and vocabulary▷ISO/TC 122/WG 9 Accessible design for packaging▷ISO/TC 122/WG 12 Supply chain applications of logistics technology▷ISO/TC 122/WG 16 Temperature controlled product packaging▷ISO/TC 122/WG 18 Active and intelligent packaging
-
[특집-기술위원회] TC 117 - 팬(Fans)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111 등이다.ISO/TC 117 팬(Fans)과 관련된 기술위원회는 TC 112, TC 113, TC 114, TC 115와 마찬가지로 1964년 결성됐다. 사무국은 영국표준협회(British Standards Institution, BSI)에서 맡고 있다.위원회는 산드라 마이크 더건(Mr Mike Duggan)가 책임지고 있다. 현재 의장은 제프 록우드(Mr Geoff Lockwood)으로 임기는 2026년까지다.ISO 기술 프로그램 관리자는 키르시 실란데르-반 후넨(Mrs Kirsi Silander-van Hunen), ISO 편집 관리자는 아룬 ABY 파라에카틸(Mr Arun ABY Paraecattil) 등으로 조사됐다.범위는 팬 분야의 표준화다. 단, IEC/TC 59 및 IEC/TC 61의 범위 내에서 가정용 및 이와 유사한 목적을 갖는 전기 팬 또는 팬 기반 전기 기기 등은 제외한다.현재 ISO/TC 117 사무국의 직접적인 책임하에 발행된 표준은 31개며 ISO/TC 117 사무국의 직접적인 책임하에 개발중인 표준은 8개다. 참여하고 있는 회원은 16명, 참관 회원은 22명이다.□ ISO/TC 117 사무국의 직접적인 책임 하에 발행된 표준 31개 중 15개 목록▷ISO 5801:2017 Fans — Performance testing using standardized airways▷ISO 5802:2001 Industrial fans — Performance testing in situ▷ISO 5802:2001/Amd 1:2015 Industrial fans — Performance testing in situ — Amendment 1▷ISO 12499:1999 Industrial fans — Mechanical safety of fans — Guarding▷ISO 12759-1:2023 Fans — Efficiency classification for fans — Part 1: General requirements▷ISO 12759-2:2019 Fans — Efficiency classification for fans — Part 2: Standard losses for drive components▷ISO 12759-3:2019 Fans — Efficiency classification for fans — Part 3: Fans without drives at maximum operating speed▷ISO 12759-4:2019 Fans — Efficiency classification for fans — Part 4: Driven fans at maximum operating speed▷ISO 12759-5:2021 Fans — Efficiency classification for fans — Part 5: Jet fans▷ISO 13347-1:2004 Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 1: General overview▷ISO 13347-1:2004/Amd 1:2010 Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 1: General overview — Amendment 1▷ISO 13347-1:2004/Cor 1:2006 Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 1: General overview — Technical Corrigendum 1▷ISO 13347-2:2004 Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 2: Reverberant room method▷ISO 13347-2:2004/Cor 1:2006 Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 2: Reverberant room method — Technical Corrigendum 1▷ISO 13347-3:2004 Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 3: Enveloping surface methods□ ISO/TC 117 사무국의 직접적인 책임 하에 개발중인 표준 8개 목록▷ISO/DIS 12759-6 Fans — Efficiency classification for fans — Part 6: Calculation of the fan energy index▷ISO/CD 13348 Industrial fans — Tolerances, methods of conversion and technical data presentation▷ISO/DIS 13351 Fans — Dimensions▷ISO/AWI TR 16219 Fans — System effects and system effect factors▷ISO/AWI 21684 Fans — Laboratory Methods of Testing Air Circulating Fans for Rating and Certification▷ISO/DIS 24660 Fans — Determination of airflow propelled through an open personnel door by a positive pressure ventilator▷ISO/AWI 27327-1 Fans — Air curtain units — Part 1: Laboratory methods of testing for aerodynamic performance rating▷ISO/DTR 27327-3 Fans — Air curtain units — Part 3: Test methods to determine energy effectiveness
-
[특집-기술위원회] TC 115 - 펌프(Pumps)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111 등이다.ISO/TC 115 폄프(Pumps)와 관련된 기술위원회는 TC 112, TC 113, TC 114와 마찬가지로 1964년 결성됐다. 사무국은 프랑스 표준화 협회(Association Française de Normalisation, AFNOR)에서 맡고 있다.위원회는 산드라 에블린 브리토(Mlle Sandra Evelyne Brito)가 책임지고 있다. 현재 의장은 줄리앙 샬레(Mr Julien Chalet)으로 임기는 2026년까지다.ISO 기술 프로그램 관리자는 키르시 실란데르-반 후넨(Mrs Kirsi Silander-van Hunen), ISO 편집 관리자는 빈센조 바주치(M Vincenzo Bazzucchi) 등으로 조사됐다.범위는 치수 및 기술 사양을 포함한 펌프 분야의 표준화다. 또한 완전한 펌핑 설치를 포함해 모든 액체에 대한 회전 역학 및 용적형 펌프에 대한 테스트 방법 및 승인 조건, 설치, 특수 용도 뿐 아니라 폐수용 회전식 혼합기 등도 표준화에 포함된다.현재 ISO/TC 115와 관련해 발행된 표준은 24개며 TC 115 사무국의 직접적인 책임 하에 발행된 표준은 5개다. 참여하고 있는 회원은 18명, 참관 회원은 24명이다.□ ISO/TC 115 사무국의 직접적인 책임 하에 발행된 표준 5개 목록▷ISO 3661:1977 End-suction centrifugal pumps — Baseplate and installation dimensions▷ISO/ASME 14414:2019 Pump system energy assessment▷ISO 17769-1:2012 Liquid pumps and installation — General terms, definitions, quantities, letter symbols and units — Part 1: Liquid pumps▷ISO 17769-2:2012 Liquid pumps and installation — General terms, definitions, quantities, letter symbols and units — Part 2: Pumping system▷ISO 20361:2019 Liquid pumps and pumps units — Noise test code — Grades 2 and 3 of accuracy□ ISO/TC 115 사무국의 소위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 115/SC 1 Dimensions and technical specifications of pumps ; 발행된 표준 12개, 개발 중인 표준 0개▷ISO/TC 115/SC 2 Methods of measurement and testing ; 발행된 표준 4개, 개발 중인 표준 0개▷ISO/TC 115/SC 3 Installation and special application ; 발행된 표준 3개, 개발 중인 표준 1개
-
[특집-ISO/IEC JTC 1/SC 17 활동] ②Project: ISO/IEC CD 17839-2.3(2023.10.02) 관련 문서 배포지난 10월2일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 ISO/IEC CD 17839-2.3 관련 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안 장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서는 'Text for DIS Ballot ISO/IEC 17839-2 : Information technology — Biometric System-on-Card — Part 2: Physical characteristics'이다. 이 문서는 공동 기술위원회 ISO/IEC JTC 1, 분과위원회 SC 17, 신분증(Identification cards)에 의해 작성됐다. 참고로 DIS는 Draft International Standard의 약어로 국제표준 초안을 말한다.첫 번째 버전인 ISO/IEC 17839-2:2015을 취소하고 기술적으로 개정된 두 번째 버전으로 대체됐으며 주요 변경 사항은 다음과 같다.△BSoC(Biometric System-on-Card) 클래스 및 요구 사항 변경 △S1 및 S2에 대한 참조를 ID-1 및 ID-T로 대체함 △기계적 요구 사항 및 제한 사항 변경 등이다.BSoC(Biometric System-on-Card)는 ISO/IEC 17839-1에 정의에 따라 완전한 생체 인식 기능을 갖춘 ICC이다.그러한 사양을 갖춘 ICC의 구현은 이 국제 표준의 파트 2에 설명되어 있는 여러가지 물리적 제약을 받고 있다. 따라서 파트 2는 ID1 BSoC 유형과 ID-T BSoC 유형 모두에 대한 사양을 제공하고 있다.ID-1 카드 크기는 ISO/IEC 7810에 정의돼 있다. 이러한 BSoC 유형에 대한 사양은 생체 인식 캡처 장치의 위치, 인체공학과 관련된 사양에 제한된다.뿐만 아니라 이러한 유형의 카드에 엠보싱을 허용하지 않는 등 특정 기술 사용에 대한 제한 사항을 기술하는 것으로 제한된다.ID-T 카드 크기 및 기타 특성은 ISO/IEC 18328-2에 지정되어 있으며 ISO/IEC 17839 시리즈는 3개의 별도 문서로 구성돼 있다.△ISO/IEC 17839-1 생체 인식 시스템 온 카드 – 핵심 요구사항(ISO/IEC 17839-1 Biometric System-on-Card – Core requirements)△ISO/IEC 17839-2 생체 인식 시스템 온 카드 - 물리적 특성(본 문서)(ISO/IEC 17839-2 Biometric System-on-Card – Physical characteristics (this document))△ISO/IEC 17839-3 생체 인식 시스템 온 카드 – 논리적 정보 교환 메커니즘(ISO/IEC 17839-3 Biometric System-on-Card – Logical information interchange mechanism)ISO/IEC 17839 시리즈의 모든 파트의 목록은 ISO 웹사이트에서 확인할 수 있다. 문서에 대한 피드백이나 질문은 사용자의 국가 표준 기관에 문의하면 된다.ISO/IEC 17839-2 생체 인식 시스템 온 카드 - 물리적 특성(본 문서)(ISO/IEC 17839-2 Biometric System-on-Card – Physical characteristics (this document))과 관련한 문서 목차를 소개하면 다음과 같다.ContentsForewordIntroduction1 Scope2 Conformance3 Normative references4 Terms and definitions5 Symbols and abbreviated terms6 Dimensions6.1 Overall dimensions6.2 Location of the biometric capture device6.2.1 General requirements6.2.2 Finger biometrics6.2.3 Voice biometrics6.2.4 Face biometrics6.2.5 Signature biometrics6.3 Size of the biometric capture device6.3.1 Finger biometrics6.3.2 Voice biometrics6.3.3 Face biometrics6.3.4 Signature biometrics6.4 Orientation6.4.1 Finger biometrics6.4.2 Voice biometrics6.4.3 Face biometrics6.4.4 Signature biometrics7 Card characteristics7.1 Mechanical Durability7.2 Man-machine interfaceBibliography
-
[특집-공동기술위원회] ③JTC 1 사무국 산하 분과위원회 및 실무위원회 현황스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(Working Group, WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등을 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.또한 국제전기기술위원회(International Electro-technical Commission, IEC)는 전기 및 전자 제품의 고품질 인프라와 국제 무역을 뒷받침하는 글로벌 비영리 회원 조직이다. 기술 혁신, 저렴한 인프라 개발, 효율적이고 지속 가능한 에너지 접근, 스마트 도시화 및 교통 시스템, 기후 변화 완화를 촉진하고 사람과 환경의 안전을 향상시키는 역할을 수행하고 있다. 170개 이상의 국가를 통합하고 전 세계 2만명의 전문가에게 글로벌하고 중립적이며 독립적인 표준화 플랫폼을 제공하고 있다. 장치, 시스템, 설치, 서비스 및 인력이 필요에 따라 작동함을 구성원이 인증하는 4가지 적합성 평가 시스템을 관리한다.적합성 평가와 함께 정부가 국가 품질 인프라를 구축하고 모든 규모의 기업이 전 세계 대부분의 국가에서 일관되게 안전하고 신뢰할 수 있는 제품을 사고 팔 수 있도록 하는 기술 프레임워크를 제공하는 약 1만개의 IEC 국제표준을 발행하고 있다.이러한 ISO와 IEC가 공동으로 구성한 기술위원회 ISO/IEC JTC 1 정보 기술(Information technology)에 대해 살펴볼 예정이다. JTC 1은 1987년에 결성됐으며 사무국은 미국국립표준협회(American National Standards Institute, ANSI)에서 맡고 있다. 위원회는 리사 라지첼(Mrs Lisa Rajchel)가 책임지고 있다. 현재 의장은 필 웬블롬(Mr Phil Wennblom)으로 임기는 202년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), 스티븐 더트널(Mr Stephen Dutnall), ISO 편집 관리자는 앨리슨 레이드 자몬드(Ms Alison Reid-Jamond) 등으로 조사됐다. 범위는 정보기술 분야의 표준화다.현재 ISO/IEC JTC 1의 직접적인 책임 하에 발행된 표준은 517개며 직접적인 책임 하에 개발중인 표준은 23개다. 참여하고 있는 회원은 40개국, 참관 회원은 62개국이다. ISO/IEC JTC 1 사무국 산하에서 활동중인 분과위원회와 실무위원회를 살며보면 아래와 같다.□ ISO/IEC JTC 1 사무국 산하 활동중인 분과위원회(Subcommittee) 및 실무위원회▷ISO/IEC JTC 1/SC 2 Coded character sets Subcommittee▷ISO/IEC JTC 1/SC 6 Telecommunications and information exchange between systems Subcommittee▷ISO/IEC JTC 1/SC 7 Software and systems engineering Subcommittee▷ISO/IEC JTC 1/SC 17 Cards and security devices for personal identification Subcommittee▷ISO/IEC JTC 1/SC 22 Programming languages, their environments and system software interfaces Subcommittee▷ISO/IEC JTC 1/SC 23 Digitally recorded media for information interchange and storage Subcommittee▷ISO/IEC JTC 1/SC 24 Computer graphics, image processing and environmental data representation Subcommittee▷ISO/IEC JTC 1/SC 25 Interconnection of information technology equipment Subcommittee▷ISO/IEC JTC 1/SC 27 Information security, cybersecurity and privacy protection Subcommittee▷ISO/IEC JTC 1/SC 28 Office equipment Subcommittee▷ISO/IEC JTC 1/SC 29 Coding of audio, picture, multimedia and hypermedia information Subcommittee▷ISO/IEC JTC 1/SC 31 Automatic identification and data capture techniques Subcommittee▷ISO/IEC JTC 1/SC 32 Data management and interchange Subcommittee▷ISO/IEC JTC 1/SC 34 Document description and processing languages Subcommittee▷ISO/IEC JTC 1/SC 35 User interfaces Subcommittee▷ISO/IEC JTC 1/SC 36 Information technology for learning, education and training Subcommittee▷ISO/IEC JTC 1/SC 37 Biometrics Subcommittee▷ISO/IEC JTC 1/SC 38 Cloud computing and distributed platforms Subcommittee▷ISO/IEC JTC 1/SC 39 Sustainability, IT and data centres Subcommittee▷ISO/IEC JTC 1/SC 40 IT service management and IT governance Subcommittee▷ISO/IEC JTC 1/SC 41 Internet of things and digital twin Subcommittee▷ISO/IEC JTC 1/SC 42 Artificial intelligence Subcommittee▷ISO/IEC JTC 1/SC 43 Brain-computer interfaces Subcommittee▷ISO/IEC JTC 1/AG 1 Advisory Group on Communications Working group▷ISO/IEC JTC 1/AG 2 Advisory Group on JTC 1 Emerging Technology and Innovation (JETI) Working group▷ISO/IEC JTC 1/AG 14 Systems Integration Facilitation (SIF) Working group▷ISO/IEC JTC 1/AG 15 Standards and Regulations Working group▷ISO/IEC JTC 1/AG 19 Coordination with ISO TC 20/SC 16 on Unmanned Aircraft Systems (UAS) Working group▷ISO/IEC JTC 1/AG 20 Coordination with ISO/TC 268/SC 1 on Smart Community Infrastructures Working group▷ISO/IEC JTC 1/AG 21 JTC1 strategic direction Working group▷ISO/IEC JTC 1/AHG 4 Collaboration across domains Working group▷ISO/IEC JTC 1/AHG 5 JTC 1 Standards Made Freely Available Working group▷ISO/IEC JTC 1/AHG 7 Supplement alignment Working group▷ISO/IEC JTC 1/JAG JTC 1 Advisory Group Working group▷ISO/IEC JTC 1/WG 11 Smart cities Working group▷ISO/IEC JTC 1/WG 12 3D Printing and scanning Working group▷ISO/IEC JTC 1/WG 13 Trustworthiness Working group▷ISO/IEC JTC 1/WG 14 Quantum information technology Working group▷ISO/IEC JTC 1/WG 15 JTC1 vocabulary Working group□ 참고로 다른 기술위원회의 책임 하에 공동 작업 중인 그룹▷ISO/TC 204/JWG 1 Joint ISO/TC 204 - ISO/IEC JTC1 WG: City data model transportation planning
-
[특집-공동기술위원회] ②JTC 1 사무국 분과위원회(SC) 책임 하에 발행 및 개발 중인 표준 현황스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(Working Group, WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등을 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.또한 국제전기기술위원회(International Electro-technical Commission, IEC)는 전기 및 전자 제품의 고품질 인프라와 국제 무역을 뒷받침하는 글로벌 비영리 회원 조직이다.기술 혁신, 저렴한 인프라 개발, 효율적이고 지속 가능한 에너지 접근, 스마트 도시화 및 교통 시스템, 기후 변화 완화를 촉진하고 사람과 환경의 안전을 향상시키는 역할을 수행하고 있다. 170개 이상의 국가를 통합하고 전 세계 2만명의 전문가에게 글로벌하고 중립적이며 독립적인 표준화 플랫폼을 제공하고 있다. 장치, 시스템, 설치, 서비스 및 인력이 필요에 따라 작동함을 구성원이 인증하는 4가지 적합성 평가 시스템을 관리한다.적합성 평가와 함께 정부가 국가 품질 인프라를 구축하고 모든 규모의 기업이 전 세계 대부분의 국가에서 일관되게 안전하고 신뢰할 수 있는 제품을 사고 팔 수 있도록 하는 기술 프레임워크를 제공하는 약 1만개의 IEC 국제 표준을 발행하고 있다.이러한 ISO와 IEC가 공동으로 구성한 기술위원회 ISO/IEC JTC 1 정보 기술(Information technology)에 대해 살펴볼 예정이다. JTC 1은 1987년 결성됐으며 사무국은 미국국립표준협회(American National Standards Institute, ANSI)에서 맡고 있다. 위원회는 리사 라지첼(Mrs Lisa Rajchel)가 책임지고 있다. 현재 의장은 필 웬블롬(Mr Phil Wennblom)으로 임기는 202년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), 스티븐 더트널(Mr Stephen Dutnall), ISO 편집 관리자는 앨리슨 레이드 자몬드(Ms Alison Reid-Jamond) 등으로 조사됐다. 범위는 정보기술 분야의 표준화다.현재 ISO/IEC JTC 1의 직접적인 책임 하에 발행된 표준은 517개며 직접적인 책임 하에 개발 중인 표준은 23개다. 참여하고 있는 회원은 40개국, 참관 회원은 62개국이다.□ ISO/IEC JTC 1 사무국의 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/IEC JTC 1/SC 2 Coded character sets ; 발행된 표준 49개, 개발 중인 표준 3개▷ISO/IEC JTC 1/SC 6 Telecommunications and information exchange between systems ; 발행된 표준 397개, 개발 중인 표준 18개▷ISO/IEC JTC 1/SC 7 Software and systems engineering ; 발행된 표준 212개, 개발 중인 표준 40개▷ISO/IEC JTC 1/SC 17 Cards and security devices for personal identification ; 발행된 표준 118개, 개발 중인 표준 33개▷ISO/IEC JTC 1/SC 22 Programming languages, their environments and system software interfaces ; 발행된 표준 113개, 개발 중인 표준 19개▷ISO/IEC JTC 1/SC 23 Digitally recorded media for information interchange and storage ; 발행된 표준 83개, 개발 중인 표준 1개▷ISO/IEC JTC 1/SC 24 Computer graphics, image processing and environmental data representation ; 발행된 표준 90개, 개발 중인 표준 14개▷ISO/IEC JTC 1/SC 25 Interconnection of information technology equipment ; 발행된 표준 225개, 개발 중인 표준 1개▷ISO/IEC JTC 1/SC 27 Information security, cybersecurity and privacy protection ; 발행된 표준 236개, 개발 중인 표준 62개▷ISO/IEC JTC 1/SC 28 Office equipment ; 발행된 표준 36개, 개발 중인 표준 8개▷ISO/IEC JTC 1/SC 29 Coding of audio, picture, multimedia and hypermedia information ; 발행된 표준 612개, 개발 중인 표준 112개▷ISO/IEC JTC 1/SC 31 Automatic identification and data capture techniques ; 발행된 표준 135개, 개발 중인 표준 18개▷ISO/IEC JTC 1/SC 32 Data management and interchange ; 발행된 표준 99개, 개발 중인 표준 23개▷ISO/IEC JTC 1/SC 34 Document description and processing languages ; 발행된 표준 76개, 개발 중인 표준 7개▷ISO/IEC JTC 1/SC 35 User interfaces ; 발행된 표준 84개, 개발 중인 표준 13개▷ISO/IEC JTC 1/SC 36 Information technology for learning, education and training ; 발행된 표준 56개, 개발 중인 표준 6개▷ISO/IEC JTC 1/SC 37 Biometrics ; 발행된 표준 139개, 개발 중인 표준 16개▷ISO/IEC JTC 1/SC 38 Cloud computing and distributed platforms ; 발행된 표준 26개, 개발 중인 표준 5개▷ISO/IEC JTC 1/SC 39 Sustainability, IT and data centres ; 발행된 표준 28개, 개발 중인 표준 7개▷ISO/IEC JTC 1/SC 40 IT service management and IT governance ; 발행된 표준 28개, 개발 중인 표준 12개▷ISO/IEC JTC 1/SC 41 Internet of things and digital twin ; 발행된 표준 43개, 개발 중인 표준 3개▷ISO/IEC JTC 1/SC 42 Artificial intelligence ; 발행된 표준 20개, 개발 중인 표준 32개▷ISO/IEC JTC 1/SC 43 Brain-computer interfaces ; 발행된 표준 0개, 개발 중인 표준 1개
-
[특집-공동기술위원회] ①JTC 1, 정보 기술(Information technology)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(Working Group, WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등을 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.또한 국제전기기술위원회(International Electro-technical Commission, IEC)는 전기 및 전자 제품의 고품질 인프라와 국제 무역을 뒷받침하는 글로벌 비영리 회원 조직이다. 기술 혁신, 저렴한 인프라 개발, 효율적이고 지속 가능한 에너지 접근, 스마트 도시화 및 교통 시스템, 기후 변화 완화를 촉진하고 사람과 환경의 안전을 향상시키는 역할을 수행하고 있다. 170개 이상의 국가를 통합하고 전 세계 2만명의 전문가에게 글로벌, 중립적이며 독립적인 표준화 플랫폼을 제공하고 있다. 장치, 시스템, 설치, 서비스 및 인력이 필요에 따라 작동함을 구성원이 인증하는 4가지 적합성 평가 시스템을 관리한다.적합성 평가와 함께 정부가 국가 품질 인프라를 구축하고 모든 규모의 기업이 전 세계 대부분의 국가에서 일관되게 안전하고 신뢰할 수 있는 제품을 사고 팔 수 있도록 하는 기술 프레임워크를 제공하는 약 1만개의 IEC 국제표준을 발행하고 있다.이러한 ISO와 IEC가 공동으로 구성한 기술위원회 ISO/IEC JTC 1 정보 기술(Information technology)에 대해 살펴볼 예정이다. JTC 1은 1987년 결성됐으며 사무국은 미국국립표준협회(American National Standards Institute, ANSI)에서 맡고 있다. 위원회는 리사 라지첼(Mrs Lisa Rajchel)가 책임지고 있다. 현재 의장은 필 웬블롬(Mr Phil Wennblom)으로 임기는 202년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), 스티븐 더트널(Mr Stephen Dutnall), ISO 편집 관리자는 앨리슨 레이드 자몬드(Ms Alison Reid-Jamond) 등으로 조사됐다. 범위는 정보기술 분야의 표준화다.현재 ISO/IEC JTC 1의 직접적인 책임 하에 발행된 표준은 517개며 직접적인 책임하에 개발 중인 표준은 23개다. 참여하고 있는 회원은 40개국, 참관 회원은 62개국이다.□ ISO/IEC JTC 1 사무국의 직접적인 책임 하에 발행된 표준 517개 중 15개 목록▷ISO 1538:1984 Programming languages — ALGOL 60▷ISO 1730:1980 Dictation equipment — Basic operating requirements▷ISO 1858:1977 Information processing — General purpose hubs and reels, with 76 mm (3 in) centrehole, for magnetic tape used in interchange instrumentation applications▷ISO 1859:1973 Information processing — Unrecorded magnetic tapes for interchange instrumentation applications — General dimensional requirements▷ISO 1860:1986 Information processing — Precision reels for magnetic tape used in interchange instrumentation applications▷ISO 2257:1980 Office machines and printing machines used for information processing — Widths of fabric printing ribbons on spools▷ISO 2258:1976 Printing ribbons — Minimum markings to appear on containers▷ISO/IEC 2382:2015 Information technology — Vocabulary▷ISO 2775:1977 Office machines and printing machines used for information processing — Widths of one-time paper or plastic printing ribbons and marking to indicate the end of the ribbons▷ISO 2784:1974 Continuous forms used for information processing — Sizes and sprocket feed holes▷ISO/IEC 3532-1:2023 Information technology — Medical image-based modelling for 3D printing — Part 1: General requirements▷ISO 3540:1976 Paper or plastic printing ribbons — Characteristics of cores▷ISO 3791:1976 Office machines and data processing equipment — Keyboard layouts for numeric applications▷ISO 3792:1976 Adding machines — Layout of function keyboard▷ISO 3802:1976 Information processing — General purpose reels with 8 mm (5/16 in) centre hole for magnetic tape for interchange instrumentation applications□ ISO/IEC JTC 1 사무국의 직접적인 책임 하에 개발중인 표준 23개 중 15개 목록▷ISO/IEC FDIS 3532-2 Information technology — Medical image-based modelling for 3D printing — Part 2: Segmentation▷ISO/IEC DIS 4879 Information technology — Quantum computing — Terminology and vocabulary▷ISO/IEC DIS 5087-2 Information technology — City data model — Part 2: City level concepts▷ISO/IEC DIS 5153-1 Information Technology — City service platform for public health emergencies — Part 1: Overview and general requirements▷ISO/IEC AWI 8801 Information Technology — 3D Printing and Scanning-- 3D scanned and labeled data Standard Operating Procedure (SOP) for evaluation of modelling from 3D scanned data▷ISO/IEC AWI 8803 Information Technology — 3D Printing and Scanning — accuracy and precision evaluation process for modeling from 3D scanned data▷ISO/IEC DIS 14776-346 Information technology — Small computer system interface (SCSI) — Part 346: Zoned Block Commands - 2 (ZBC-2)▷ISO/IEC AWI 16466 Information Technology — 3D Printing and scanning — Assessment methods of 3D scanned data for 3D printing model▷ISO/IEC DIS 17760-105 Information technology — ATA Command Set - 5 (ACS-5) — Part 105: Title missing▷ISO/IEC DIS 17917 Smart cities — Guidance to establishing a decision-making framework for sharing data and information services▷ISO/IEC AWI TR 18157 Information technology — Introduction to quantum computing▷ISO/IEC PRF 18974 Information technology — OpenChain security assurance specificationISO/IEC DIS 19987 Information technology — EPC Information Services (EPCIS)▷ISO/IEC DIS 19988 Information technology — Core Business Vocabulary (CBV)▷ISO/IEC AWI TR 20169 Information technology — Overview of smart city standardization