검색결과
-
[특집-ISO/IEC JTC 1/SC 17 활동] 35. Result of voting on SR Ballot for ISO/IEC 7811-7(N 7345)2023년 12월04일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Result of voting on SR ballot for ISO/IEC 7811-7(N 7345)' 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서인 'Result of voting on SR ballot for ISO/IEC 7811-7'은 ISO/IEC 7811-7:2018 (Ed 3)(restricted access)와 관련한 투표결과를 포함하고 있다.ISO/IEC 7811-7:2018 (Ed 3)(restricted access)는 Identification cards — Recording technique — Part 7: Magnetic stripe: High coercivity, high density에 관한 것이다.N 7345 문서는 N 7338, N 7339, N 7340, N 7341, N 7342, N 7343, N 7344 문서와 마찬가지로 2023년 7월15일~12월2일 동안 투표가 진행됐다. 기간 내 각 회원국들은 안건에 대해 의사를 표명했다.투표 항목은 △Confirm △Revise/Amend △Withdraw △Abstain lack of consensus △Abstain lack of national expert input △Stabilize △Q.2 △Q.3 △Q.4 △Q.5 △Q.6 등 총 11개다. 구체적인 질문 내용은 다음과 같다.▷ Q.1 Recommended action▷ Q.2 Has this International Standard been adopted or is it intended to be adopted in the future as a national standard or other publication?▷ Q.3 Is the national publication identical to the International Standard or was it modified?▷ Q.4 If this International Standard has not been nationally adopted, is it applied or used in your country without national adoption or are products/processes/services used in your country based on this standard?▷ Q.5 Is this International Standard, or its national adoption, referenced in regulations in your country?▷ Q.6 If the committee decides to revise or amend, do you propose an expert and/or project leader for the development of that project?참고로 11개 항목 중 투표 결과를 살펴보면 △Confirm 12개국 △Revise/Amend 1개국 △Abstain lack of national expert input 22개국 등으로 나타났다.- 이하 생략 -
-
[특집-ISO/IEC JTC 1/SC 17 활동] 34. Result of voting on SR ballot for ISO/IEC 7811-6(N 7344)2023년 12월04일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Result of voting on SR ballot for ISO/IEC 7811-6(N 7344)' 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서인 'Result of voting on SR ballot for ISO/IEC 7811-6'은 ISO/IEC 7811-6:2018 (Ed 5)(restricted access)와 관련한 투표결과를 포함하고 있다.ISO/IEC 7811-6:2018 (Ed 5)(restricted access)는 Identification cards — Recording technique — Part 6: Magnetic stripe: High coercivity에 관한 것이다.N 7344 문서는 N 7338, N 7339, N 7340, N 7341, N 7342, N 7343 문서와 마찬가지로 2023년 7월15일~12월2일 동안 투표가 진행됐다. 기간 내 각 회원국들은 안건에 대해 의사를 표명했다.투표 항목은 △Confirm △Revise/Amend △Withdraw △Abstain lack of consensus △Abstain lack of national expert input △Stabilize △Q.2 △Q.3 △Q.4 △Q.5 △Q.6 등 총 11개다. 구체적인 질문 내용은 다음과 같다.▷ Q.1 Recommended action▷ Q.2 Has this International Standard been adopted or is it intended to be adopted in the future as a national standard or other publication?▷ Q.3 Is the national publication identical to the International Standard or was it modified?▷ Q.4 If this International Standard has not been nationally adopted, is it applied or used in your country without national adoption or are products/processes/services used in your country based on this standard?▷ Q.5 Is this International Standard, or its national adoption, referenced in regulations in your country?▷ Q.6 If the committee decides to revise or amend, do you propose an expert and/or project leader for the development of that project?참고로 11개 항목 중 투표 결과를 살펴보면 △Confirm 11개국 △Revise/Amend 1개국 △Abstain lack of national expert input 23개국 등으로 나타났다.- 이하 생략 -
-
[특집-ISO/IEC JTC 1/SC 17 활동] 33. Result of voting on SR ballot for ISO/IEC 7811-2(N 7343)2023년 12월04일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Result of voting on SR ballot for ISO/IEC 7811-2(N 7343)' 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서인 'Result of voting on SR ballot for ISO/IEC 7811-2'는 ISO/IEC 7811-2:2018 (Ed 5)(restricted access)와 관련한 투표결과를 포함하고 있다. ISO/IEC 7811-2:2018 (Ed 5)(restricted access)는 Identification cards — Recording technique — Part 2: Magnetic stripe: Low coercivity에 관한 것이다. N 7343 문서는 N 7338, N 7339, N 7340, N 7341, N 7342 문서와 마찬가지로 2023년 7월15일~12월2일 동안 투표가 진행됐다. 기간 내 각 회원국들은 안건에 대해 의사를 표명했다.투표 항목은 △Confirm △Revise/Amend △Withdraw △Abstain lack of consensus △Abstain lack of national expert input △Stabilize △Q.2 △Q.3 △Q.4 △Q.5 △Q.6 등 총 11개다. 구체적인 질문 내용은 다음과 같다.▷ Q.1 Recommended action▷ Q.2 Has this International Standard been adopted or is it intended to be adopted in the future as a national standard or other publication?▷ Q.3 Is the national publication identical to the International Standard or was it modified?▷ Q.4 If this International Standard has not been nationally adopted, is it applied or used in your country without national adoption or are products/processes/services used in your country based on this standard?▷ Q.5 Is this International Standard, or its national adoption, referenced in regulations in your country?▷ Q.6 If the committee decides to revise or amend, do you propose an expert and/or project leader for the development of that project?참고로 11개 항목 중 투표 결과를 살펴보면 △Confirm 12개국 △Revise/Amend 1개국 △Abstain lack of consensus 1개국 △Abstain lack of national expert input 21개국 등으로 나타났다. - 이하 생략 -
-
세계 자동차 기능안전 전문가 한국에 모여국가기술표준원(원장 진종욱, 이하 국표원)에 따르면 4월 22일부터 26일까지 5일간 자동차 국제표준 선도를 위해 국제표준화기구 자동차 기능안전*(ISO/TC 22/SC 32/WG 8) 표준 회의가 판교에서 개최된다. 자동차 기능안전 표준 회의에 한국·독일·미국·일본 등 22개국 기능안전 전문가 110여 명이 참여한다. 참고로 기능안전(Functional Safety)이란 전기전자 장치에서 기능상 고장이나 오류가 발생하더라도 시스템이 안전한 상태를 유지하도록 설계하는 기법으로 자동차 분야는 2011년 ISO 26262에 규정으로 제정됐다. 독일을 시작으로 전세계 완성차 업체가 협력사들에 요구하는 자동차 업계의 사실상 의무 기준이다. 자동차 전기전자장치 또는 자율주행 시스템 등의 설계적 결함으로 인한 오작동 및 사고를 방지하기 위해 완성차 업체들은 협력사들에 ISO 26262 등 기능안전 표준 준수를 요구하여 왔다. 최근 자동차 국제규제협의체인 UNECE WP.29*는 자율주행 기능의 안전성 입증을 위해 ISO 26262를 채택했다. UNECE WP.29(UN유럽경제위원회 국제자동차규제조화포럼)는 자동차 및 부품에 대한 국제 규제 부합화 및 국가간 상호인정을 위한 국제기구이다. 167개 선택적용 규정(UN R)과 23개 의무적용 규정(UN GTR)이 존재하며 선택적용 규정도 유럽 등 주요시장 수출을 위해 준수해야 된댜. 국내에서 개최되는 기능안전 표준 회의는 자동차 산업전반에 실효적 영향을 미치는 기능안전 표준에 대한 국내 업계의 높아진 관심을 반영하고 있다. 과거 완성차 업체 등 소수만이 관심을 가졌으나 국제규제 강화에 따라 기능안전 표준 준수가 수출 경쟁력 유지와 직결되어 현재는 전장부품·차량용반도체·SW 등 대부분의 자동차 관련 기업에서 기능안전 표준을 준수하고 있다. 이번 회의에서는 △ISO 26262 제3판 개정 작업 착수 △인공지능(AI) 적용 시 안전확보 방안 △완전자율주행 개념 및 용어 반영 등 최신 기술 이슈들에 대해 12개 파트별로 전세계 전문가들이 논의 예정이다. 한국은 현대자동차 김민성 팀장이‘기능안전 가이드라인 파트’의 리더를 맡아 해당 논의를 이끌게 된다. 진종욱 국표원장은 “자율주행, 인공지능(AI) 등 첨단기술이 도입될수록 자동차의 안전성 확보를 위해 국제표준의 영향력이 증가하고 있으며, 국표원은 국내 업계의 국제표준활동 참여확대와 의견반영을 적극 지원하겠다”고 밝혔다. 다음은 판교에서 개최되고 있는 '국제표준화기구 자동차 기능안전 총회' 개요이다. ■ 국제표준화기구 자동차 기능안전 총회 개요 □ 회의 개요 ○ 행사명: ISO/TC 22/SC 32/WG 8* 제38차 총회 * Road vehicles - Electrical & electronic components & general system aspects - Functional safety 도로차량 기술위원회 - 전기전자부품 및 일반시스템 분과위원회 - 기능안전 작업반 ○ 주최/주관/후원: 국가기술표준원/(사)첨단자동차기술협회/현대자동차(주) ○ 일시/장소: ’24.4.22.(월)~4.26.(금), 그래비티서울판교 스페이스볼룸 ○ 참석자: 한국(현대차, 모비스, 삼성전자, LX세미콘 등), 독일(폭스바겐, 보쉬 등), 미국(포드, GM 등), 일본(토요타, 혼다 등) 등 22개 회원국 전문가 110여명 □ 주요 논의 내용 및 일정 ㅇ (논의 그룹 구조) ISO 26262의 12개 하위 파트별 그룹 및 SOTIF* 파트로 구성 * Safety Of The Intended Functionality(의도된 기능성의 안전)
-
[특집-ISO/IEC JTC 1/SC 17 활동] 32. Result of voting on SR Ballot for ISO/IEC 7811-1(N 7342)2023년 12월04일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Result of voting on SR Ballot for ISO/IEC 7811-1(N 7342)' 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서인 'Result of voting on SR Ballot for ISO/IEC 7811-1'는 ISO/IEC 7811-1:2018 (Ed 5)(restricted access)와 관련한 투표결과를 포함하고 있다. ISO/IEC 7811-1:2018 (Ed 5)(restricted access)는 Identification cards — Recording technique — Part 1: Embossing에 관한 것이다. N 7342 문서는 N 7338, N 7339, N 7340, N 7341 문서와 마찬가지로 2023년 7월15일~12월2일 동안 투표가 진행됐다. 기간 내 각 회원국들은 안건에 대해 의사를 표명했다.투표 항목은 △Confirm △Revise/Amend △Withdraw △Abstain lack of consensus △Abstain lack of national expert input △Stabilize △Q.2 △Q.3 △Q.4 △Q.5 △Q.6 등 총 11개다. 구체적인 질문 내용은 다음과 같다.▷ Q.1 Recommended action▷ Q.2 Has this International Standard been adopted or is it intended to be adopted in the future as a national standard or other publication?▷ Q.3 Is the national publication identical to the International Standard or was it modified?▷ Q.4 If this International Standard has not been nationally adopted, is it applied or used in your country without national adoption or are products/processes/services used in your country based on this standard?▷ Q.5 Is this International Standard, or its national adoption, referenced in regulations in your country?▷ Q.6 If the committee decides to revise or amend, do you propose an expert and/or project leader for the development of that project?참고로 11개 항목 중 투표 결과를 살펴보면 △Confirm 12개국 △Revise/Amend 1개국 △Abstain lack of consensus 1개국 △Abstain lack of national expert input 21개국 등으로 나타났다. - 이하 생략 -
-
[특집-ISO/IEC JTC 1/SC 17 활동] 31. Result of voting on SR Ballot for ISO/IEC 18745-1(N 7341)2023년 12월04일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Result of voting on SR Ballot for ISO/IEC 18013-1(N 7340)' 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서인 'Result of voting on SR Ballot for ISO/IEC 18745-1'는 ISO/IEC 18745-1:2018 (Ed 2)(restricted access)와 관련한 투표결과를 포함하고 있다. ISO/IEC 18745-1:2018 (Ed 2)(restricted access)는 Test methods for machine readable travel documents (MRTD) and associated devices — Part 1: Physical test methods for passport books (durability)에 관한 것이다. N 7341 문서는 N 7338, N 7339, N 7340 문서와 마찬가지로 2023년 7월15일~12월2일 동안 투표가 진행됐다. 기간 내 각 회원국들은 안건에 대해 의사를 표명했다.투표 항목은 △Confirm △Revise/Amend △Withdraw △Abstain lack of consensus △Abstain lack of national expert input △Stabilize △Q.2 △Q.3 △Q.4 △Q.5 △Q.6 등 총 11개다. 구체적인 질문 내용은 다음과 같다.▷ Q.1 Recommended action▷ Q.2 Has this International Standard been adopted or is it intended to be adopted in the future as a national standard or other publication?▷ Q.3 Is the national publication identical to the International Standard or was it modified?▷ Q.4 If this International Standard has not been nationally adopted, is it applied or used in your country without national adoption or are products/processes/services used in your country based on this standard?▷ Q.5 Is this International Standard, or its national adoption, referenced in regulations in your country?▷ Q.6 If the committee decides to revise or amend, do you propose an expert and/or project leader for the development of that project?참고로 11개 항목 중 투표 결과를 살펴보면 △Confirm 9개국 △Revise/Amend 4개국 △Abstain lack of national expert input 22개국 등으로 나타났다. - 이하 생략 -
-
[특집-기술위원회] TC 221 - 토목섬유(Geosynthetics)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 △1994년 TC 210, TC 211 △1996년 TC 213, TC 214 △1998년 TC 215~218 1999년 TC 219, TC 220 등이 있다.ISO/TC 221 토목섬유(Geosynthetics)와 관련된 기술위원회는 2000년 결성됐다. 사무국은 영국 표준협회(British Standards Institution, BSI)에서 맡고 있다.위원회는 데이비드 하이드 1세(Mr David I Hyde)가 책임지고 있다. 현재 의장은 피터 애치슨(Mr Peter Atchison)이며 임기는 2026년 말까지다.ISO 기술 프로그램 관리자는 안나 카테리나 로시(Dr Anna Caterina Rossi), ISO 편집 관리자는 타이나 비셰비치(Ms Tajna Biscevic) 등이다.범위는 지오텍스타일, 지오멤브레인, 토목합성재료 점토 차수재 및 기타 토목합성 관련 제품을 포함한 모든 토목합성 제품의 표준화다.현재 ISO/TC 221 사무국의 직접적인 책임 하에 발행된 표준은 47개며 ISO/TC 221 사무국의 직접적인 책임 하에 개발 중인 표준은 12개다. 참여하고 있는 회원은 30개국, 참관 회원은 16개국이다.□ ISO/TC 221 사무국의 직접적인 책임 하에 발행된 표준 47개 중 15개 목록▷ISO 9862:2023 Geosynthetics — Sampling and preparation of test specimens▷ISO 9863-1:2016 Geosynthetics — Determination of thickness at specified pressures — Part 1: Single layers▷ISO 9863-1:2016/Amd 1:2019 Geosynthetics — Determination of thickness at specified pressures — Part 1: Single layers — Amendment 1▷ISO 9864:2005 Geosynthetics — Test method for the determination of mass per unit area of geotextiles and geotextile-related products▷ISO 10318-1:2015 Geosynthetics — Part 1: Terms and definitions▷ISO 10318-1:2015/Amd 1:2018 Geosynthetics — Part 1: Terms and definitions — Amendment 1▷ISO 10318-2:2015 Geosynthetics — Part 2: Symbols and pictograms▷ISO 10318-2:2015/Amd 1:2018 Geosynthetics — Part 2: Symbols and pictograms — Amendment 1▷ISO 10319:2015 Geosynthetics — Wide-width tensile test▷ISO 10320:2019 Geosynthetics — Identification on site▷ISO 10321:2008 Geosynthetics — Tensile test for joints/seams by wide-width strip method▷ISO 10722:2019 Geosynthetics — Index test procedure for the evaluation of mechanical damage under repeated loading — Damage caused by granular material (laboratory test method)▷ISO 10769:2011 Clay geosynthetic barriers — Determination of water absorption of bentonite▷ISO 10772:2012 Geotextiles - Test method for the determination of the filtration behaviour of geotextiles under turbulent water flow conditions▷ISO 10773:2011 Clay geosynthetic barriers — Determination of permeability to gases□ ISO/TC 221 사무국의 직접적인 책임 하에 개발 중인 표준 12개 목록▷ISO/AWI 10318-1 Geosynthetics — Part 1: Terms and definitions▷ISO/AWI 10318-2 Geosynthetics — Part 2: Symbols and pictograms▷ISO/DIS 10319 Geosynthetics — Wide-width tensile test▷ISO/DIS 12236 Geosynthetics — Static puncture test (CBR test)▷ISO/DIS 12957-2 Geosynthetics — Determination of friction characteristics — Part 2: Inclined plane test▷ISO/FDIS 13426-2 Geotextiles and geotextile-related products — Strength of internal structural junctions — Part 2: Geocomposites▷ISO/DIS 13428 Geosynthetics — Determination of the protection efficiency of a geosynthetic against impact damage▷ISO/FDIS 13431 Geotextiles and geotextile-related products — Determination of tensile creep and creep rupture behaviour▷ISO/DIS 13433 Geosynthetics — Determination of dynamic perforation (cone drop test)▷ISO/CD TR 18228-5 Design using geosynthetics — Part 5: Stabilization▷ISO/DTR 18228-8 Design using geosynthetics — Part 8: Surface erosion control▷ISO/TR 18228-10 Design using geosynthetics — Part 10: Asphalt pavements
-
[특집-기술위원회] TC 220 - 극저온 용기(Cryogenic vessels)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 △1994년 TC 210, TC 211 △1996년 TC 213, TC 214 △1998년 TC 215~218 등이 있다.ISO/TC 220 극저온 용기(Cryogenic vessels)와 관련된 기술위원회는 TC 219와 마찬가지로 1999년 결성됐다. 사무국은 프랑스 표준화기구(Association Française de Normalization, AFNOR)에서 맡고 있다.위원회는 도니아 베니더(Mme Donia Benider)가 책임지고 있다. 현재 의장은 루시앙 바라시(M Lucien Varrassi)이며 임기는 2026년 말까지다. ISO 기술 프로그램 관리자는 블란딘 가르시아(Mme Blandine Garcia), ISO 편집 관리자는 발레리아 아가넨노네(Ms Valeria Agamennone) 등이다.범위는 UN(United Nations)의 위험물 운송에 관한 권장사항(모델 규정) 클래스 2의 냉동 액화가스 저장 및 운송을 위한 절연 용기(진공 또는 비진공) 분야 표준화다.특히 용기 및 안전 부속품의 설계, 가스/재료 호환성, 절연 성능, 장비 및 부속품의 작동 요구 사항에 관한 표준화다.현재 ISO/TC 220 사무국의 직접적인 책임 하에 발행된 표준은 25개며 ISO/TC 220 사무국의 직접적인 책임 하에 개발 중인 표준은 11개다. 참여하고 있는 회원은 12개국, 참관 회원은 20개국이다.□ ISO/TC 220 사무국의 직접적인 책임 하에 발행된 표준 25개 중 15개 목록▷ISO 12991:2012 Liquefied natural gas (LNG) — Tanks for on-board storage as a fuel for automotive vehicles▷ISO 20421-1:2019Cryogenic vessels — Large transportable vacuum-insulated vessels — Part 1: Design, fabrication, inspection and testing▷ISO 20421-1:2019/Amd 1:2022 Cryogenic vessels — Large transportable vacuum-insulated vessels — Part 1: Design, fabrication, inspection and testing — Amendment 1▷ISO 20421-2:2017 Cryogenic vessels — Large transportable vacuum-insulated vessels — Part 2: Operational requirements▷ISO 21009-1:2022 Cryogenic vessels — Static vacuum-insulated vessels — Part 1: Design, fabrication, inspection and tests▷ISO 21009-2:2015 Cryogenic vessels — Static vacuum insulated vessels — Part 2: Operational requirements▷ISO 21010:2017 Cryogenic vessels — Gas/material compatibility▷ISO 21011:2008 Cryogenic vessels — Valves for cryogenic service▷ISO 21012:2018 Cryogenic vessels — Hoses▷ISO 21013-1:2021 Cryogenic vessels — Pressure-relief accessories for cryogenic service — Part 1: Reclosable pressure-relief valves▷ISO 21013-2:2007 Cryogenic vessels — Pressure-relief accessories for cryogenic service — Part 2: Non-reclosable pressure-relief devices▷ISO 21013-2:2007/Amd 1:2018 Cryogenic vessels — Pressure-relief accessories for cryogenic service — Part 2: Non-reclosable pressure-relief devices — Amendment 1▷ISO 21013-3:2016 Cryogenic vessels — Pressure-relief accessories for cryogenic service — Part 3: Sizing and capacity determination▷ISO 21013-4:2012 Cryogenic vessels — Pilot operated pressure relief devices — Part 4: Pressure-relief accessories for cryogenic service▷ISO 21013-4:2012/Amd 1:2019 Cryogenic vessels — Pilot operated pressure relief devices — Part 4: Pressure-relief accessories for cryogenic service — Amendment 1□ ISO/TC 220 사무국의 직접적인 책임 하에 개발 중인 표준 11개 목록▷ISO/CD 20421-1 Cryogenic vessels — Large transportable vacuum-insulated vessels — Part 1: Design, fabrication, inspection and testing▷ISO/DIS 21009-1 Cryogenic vessels — Static vacuum-insulated vessels — Part 1: Design, fabrication, inspection and tests▷ISO/DIS 21009-2 Cryogenic vessels — Static vacuum insulated vessels — Part 2: Operational requirements▷ISO/AWI 21010 Cryogenic vessels — Gas/material compatibility▷ISO 21012 Cryogenic vessels — Hoses▷ISO 21013-1:2021/FDAmd 1 Cryogenic vessels — Pressure-relief accessories for cryogenic service — Part 1: Reclosable pressure-relief valves — Amendment 1▷ISO/DIS 21013-2 Cryogenic vessels — Pressure-relief accessories for cryogenic service — Part 2: Non-reclosable pressure-relief devices▷ISO/CD 21013-3 Cryogenic vessels — Pressure-relief accessories for cryogenic service — Part 3: Sizing and capacity determination▷ISO/DIS 21028-1 Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 1: Temperatures below -80 degrees °C▷ISO/AWI 21029-1 Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 1: Design, fabrication, inspection and tests▷ISO/DIS 24490 Cryogenic vessels — Centrifugal pumps for cryogenic service
-
[특집-기술위원회] TC 217 - 화장품(Cosmetics)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 △1994년 TC 210, TC 211 △1996년 TC 213, TC 214 등이 있다.ISO/TC 217 화장품(Cosmetics)과 관련된 기술위원회는 TC 215, TC 216과 마찬가지로 1998년 결성됐다. 사무국은 이란 국가 표준기구(Iran National Standards Organization, INSO)에서 맡고 있다.위원회는 엘햄 가세미(Mrs Elham Ghasemi)가 책임지고 있다. 현재 의장은 울리 오스터발더(Mr Uli Osterwalder)이며 임기는 2025년 말까지다. ISO 기술 프로그램 관리자는 웬얀 리(Ms Wenyan Li), ISO 편집 관리자는 마사 카산토산(Mrs Martha Casantosan) 등이다.범위는 화장품 제품 분야의 표준화다. 현재 ISO/TC 217 사무국의 직접적인 책임 하에 발행된 표준은 49개며 ISO/TC 217 사무국의 직접적인 책임 하에 개발 중인 표준은 3개다. 참여하고 있는 회원은 43개국, 참관 회원은 30개국이다.□ ISO/TC 217 사무국의 직접적인 책임 하에 발행된 표준 49개 중 15개 목록▷ISO 4973:2023 Cosmetics — Microbiology — Quality control of culture media and diluents used in cosmetics standards▷ISO 10130:2009 Cosmetics — Analytical methods — Nitrosamines: Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC, post-column photolysis and derivatization▷ISO 11930:2019 Cosmetics — Microbiology — Evaluation of the antimicrobial protection of a cosmetic product▷ISO 11930:2019/Amd 1:2022 Cosmetics — Microbiology — Evaluation of the antimicrobial protection of a cosmetic product — Amendment 1▷ISO 12787:2011 Cosmetics — Analytical methods — Validation criteria for analytical results using chromatographic techniques▷ISO/TR 14735:2013 Cosmetics — Analytical methods — Nitrosamines: Technical guidance document for minimizing and determining N-nitrosamines in cosmetics▷ISO 15819:2014 Cosmetics — Analytical methods — Nitrosamines: Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC-MS-MS▷ISO 16128-1:2016 Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients and products — Part 1: Definitions for ingredients▷ISO 16128-2:2017 Cosmetics — Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients — Part 2: Criteria for ingredients and products▷ISO 16128-2:2017/Amd 1:2022 Cosmetics — Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients — Part 2: Criteria for ingredients and products — Amendment 1▷ISO 16212:2017 Cosmetics — Microbiology — Enumeration of yeast and mould▷ISO 16212:2017/Amd 1:2022 Cosmetics — Microbiology — Enumeration of yeast and mould — Amendment 1▷ISO 16217:2020 Cosmetics — Sun protection test methods — Water immersion procedure for determining water resistance▷ISO/TR 17276:2014 Cosmetics — Analytical approach for screening and quantification methods for heavy metals in cosmetics▷ISO 17516:2014 Cosmetics — Microbiology — Microbiological limits□ ISO/TC 217 사무국의 직접적인 책임 하에 개발 중인 표준 3개 목록▷ISO/AWI 22176 Cosmetics — Analytical methods — Development of a global approach for validation of quantitative analytical methods▷ISO/DIS 23675 Cosmetics — Sun protection test methods — In Vitro determination of Sun Protection Factor (SPF)▷ISO/DIS 23698 Cosmetics — Measurement of the sunscreen efficacy by diffuse reflectance spectroscopy
-
[특집-기술위원회] TC 219 - 바닥재(Floor coverings)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 △1994년 TC 210, TC 211 △1996년 TC 213, TC 214 △1998년 TC 215~218 등이 있다.ISO/TC 219 바닥재(Floor coverings)와 관련된 기술위원회는 1999년 결성됐다. 사무국은 벨기에 표준화기구(Bureau voor Normalisatie/Bureau de Normalisation, NBN)에서 맡고 있다.위원회는 카린 유핑거(Ms Karin Eufinger)가 책임지고 있다. 현재 의장은 제인 가드너(Ms Jane Gardner)이며 임기는 2024년 말까지다. ISO 기술 프로그램 관리자는 안나 카테리나 로시(Dr Anna Caterina Rossi), ISO 편집 관리자는 타즈나 비세빅(Ms Tajna Biscevic) 등이다.범위는 섬유, 탄력성 있는 바닥재 및 합판(라미네이트) 바닥재 분야의 표준화다. 단, 목재, 세라믹, 테라조, 콘크리트, 이중바닥재(악세스 플로어, Raised Access Floor)는 제외한다.현재 ISO/TC 219 사무국의 직접적인 책임 하에 발행된 표준은 83개며 ISO/TC 219 사무국의 직접적인 책임 하에 개발 중인 표준은 10개다. 참여하고 있는 회원은 29개국, 참관 회원은 17개국이다.□ ISO/TC 219 사무국의 직접적인 책임 하에 발행된 표준 83개 중 15개 목록▷ISO 1763:2020 Textile floor coverings — Determination of number of tufts and/or loops per unit length and per unit area▷ISO 1765:1986 Machine-made textile floor coverings — Determination of thickness▷ISO 1766:1999 Textile floor coverings — Determination of thickness of pile above the substrate▷ISO 1957:2000 Machine-made textile floor coverings — Selection and cutting of specimens for physical tests▷ISO 2094:1999 Textile floor coverings — Determination of thickness loss under dynamic loading▷ISO 2424:2007 Textile floor coverings — Vocabulary▷ISO 2549:1972 Textile floor coverings — Hand-knotted carpets — Determination of tuft leg length above the woven ground▷ISO 2549:1972/Cor 1:1990 Textile floor coverings — Hand-knotted carpets — Determination of tuft leg length above the woven ground — Technical Corrigendum 1▷ISO 2550:1972 Textile floor coverings — Hand-made carpets — Determination of types of knots▷ISO 2551:2020 Textile floor coverings and textile floor coverings in tile form — Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane▷ISO 3018:1974 Textile floor coverings — Rectangular textile floor coverings — Determination of dimensions▷ISO 3415:1986 Textile floor coverings — Determination of thickness loss after brief, moderate static loading▷ISO 3416:1986 Textile floor coverings — Determination of thickness loss after prolonged, heavy static loading▷ISO 4760:2022 Laminate flooring — Topical moisture resistance — Assembled joint▷ISO 4918:2016 Resilient, textile and laminate floor coverings — Castor chair test□ ISO/TC 219 사무국의 직접적인 책임 하에 개발 중인 표준 10개 목록▷ISO/FDIS 2424 Textile floor coverings — Vocabulary▷ISO/AWI 4918 Resilient, textile, laminate and modular mechanical locked floor coverings — Castor chair test▷ISO/CD 10833 Textile floor coverings — Determination of resistance to damage at cut edges using the modified Vettermann drum test▷ISO/CD 11378-2 Textile floor coverings — Laboratory soiling tests — Part 2: Drum test▷ISO/DIS 14486 Laminate floor coverings — Specification▷ISO/DIS 20251 Textile floor coverings — Water impermeability test▷ISO/CD 23106 Textile floor coverings — Production of changes in appearance by means of Vettermann drum tester▷ISO/CD 23122 Textile floor coverings — Production of changes in appearance by means of hexapod tumbler tester▷ISO/AWI 23999 Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat▷ISO/FDIS 24342 Resilient and textile floor-coverings — Determination of side length, edge straightness and squareness of tiles and planks