검색결과
-
[특집-기술위원회] TC 217 - 화장품(Cosmetics)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 △1994년 TC 210, TC 211 △1996년 TC 213, TC 214 등이 있다.ISO/TC 217 화장품(Cosmetics)과 관련된 기술위원회는 TC 215, TC 216과 마찬가지로 1998년 결성됐다. 사무국은 이란 국가 표준기구(Iran National Standards Organization, INSO)에서 맡고 있다.위원회는 엘햄 가세미(Mrs Elham Ghasemi)가 책임지고 있다. 현재 의장은 울리 오스터발더(Mr Uli Osterwalder)이며 임기는 2025년 말까지다. ISO 기술 프로그램 관리자는 웬얀 리(Ms Wenyan Li), ISO 편집 관리자는 마사 카산토산(Mrs Martha Casantosan) 등이다.범위는 화장품 제품 분야의 표준화다. 현재 ISO/TC 217 사무국의 직접적인 책임 하에 발행된 표준은 49개며 ISO/TC 217 사무국의 직접적인 책임 하에 개발 중인 표준은 3개다. 참여하고 있는 회원은 43개국, 참관 회원은 30개국이다.□ ISO/TC 217 사무국의 직접적인 책임 하에 발행된 표준 49개 중 15개 목록▷ISO 4973:2023 Cosmetics — Microbiology — Quality control of culture media and diluents used in cosmetics standards▷ISO 10130:2009 Cosmetics — Analytical methods — Nitrosamines: Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC, post-column photolysis and derivatization▷ISO 11930:2019 Cosmetics — Microbiology — Evaluation of the antimicrobial protection of a cosmetic product▷ISO 11930:2019/Amd 1:2022 Cosmetics — Microbiology — Evaluation of the antimicrobial protection of a cosmetic product — Amendment 1▷ISO 12787:2011 Cosmetics — Analytical methods — Validation criteria for analytical results using chromatographic techniques▷ISO/TR 14735:2013 Cosmetics — Analytical methods — Nitrosamines: Technical guidance document for minimizing and determining N-nitrosamines in cosmetics▷ISO 15819:2014 Cosmetics — Analytical methods — Nitrosamines: Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC-MS-MS▷ISO 16128-1:2016 Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients and products — Part 1: Definitions for ingredients▷ISO 16128-2:2017 Cosmetics — Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients — Part 2: Criteria for ingredients and products▷ISO 16128-2:2017/Amd 1:2022 Cosmetics — Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients — Part 2: Criteria for ingredients and products — Amendment 1▷ISO 16212:2017 Cosmetics — Microbiology — Enumeration of yeast and mould▷ISO 16212:2017/Amd 1:2022 Cosmetics — Microbiology — Enumeration of yeast and mould — Amendment 1▷ISO 16217:2020 Cosmetics — Sun protection test methods — Water immersion procedure for determining water resistance▷ISO/TR 17276:2014 Cosmetics — Analytical approach for screening and quantification methods for heavy metals in cosmetics▷ISO 17516:2014 Cosmetics — Microbiology — Microbiological limits□ ISO/TC 217 사무국의 직접적인 책임 하에 개발 중인 표준 3개 목록▷ISO/AWI 22176 Cosmetics — Analytical methods — Development of a global approach for validation of quantitative analytical methods▷ISO/DIS 23675 Cosmetics — Sun protection test methods — In Vitro determination of Sun Protection Factor (SPF)▷ISO/DIS 23698 Cosmetics — Measurement of the sunscreen efficacy by diffuse reflectance spectroscopy
-
[특집-기술위원회] TC 206 - 파인 세라믹(Fine ceramics)… 모든 형태의 파인 세라믹 재료 및 제품 분야 표준화스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 △1988년 TC 192~TC 194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 등이 있다.ISO/TC 206 파인 세라믹(Fine ceramics)과 관련된 기술위원회는 TC 204, TC 205와 마찬가지로 1992년 결성됐다. 사무국은 일본 산업표준조사회(日本産業標準調査会, Japanese Industrial Standards Committee, JISC)에서 맡고 있다.위원회는 히로유키 미야자키(Dr Hiroyuki Miyazaki)가 책임지고 있다. 현재 의장은 이희수 교수(Prof Heesoo Lee)가 맡고 있다.ISO 기술 프로그램 관리자는 츄안유 추(Ms Chuanyu Zou), ISO 편집 관리자는 아룬 ABY 파라에카틸(Mr Arun ABY Paraecattil) 등이다.범위는 모든 형태의 파인 세라믹 재료 및 제품 분야 표준화다. 기계, 열, 화학, 전기, 자기, 광학 및 이들의 조합을 포함한 특정 기능 응용 분야를 위한 분말, 단일체, 코팅 및 복합재 등 모든 형태를 포함하고 있다. 파인 세라믹이라는 용어는 특정 기능적 특성을 지닌 고도로 가공된 고성능, 주로 비금속 무기 재료로 정의된다.참고로 파인 세라믹의 대체 용어는 고급 세라믹, 엔지니어링 세라믹, 테크니컬 세라믹 또는 고성능 세라믹이다. 파인 세라믹(Fine ceramics)은 절연체·내열재·구조재로 쓸수 있도록 고도기술로 개발된 새로운 세라믹을 말한다.현재 ISO/TC 206 사무국의 직접적인 책임 하에 발행된 표준은 156개며 ISO/TC 206 사무국의 직접적인 책임하에 개발 중인 표준은 32개다. 참여하고 있는 회원은 13개국, 참관 회원은 22개국이다.□ ISO/TC 206 사무국의 직접적인 책임 하에 발행된 표준 156개 중 15개 목록▷ISO 3169:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of impurities in aluminium oxide powders using inductively coupled plasma-optical emission spectrometry▷ISO 3180:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of calcium-phosphate-based powders for non-biomedical applications▷ISO 4825-1:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) --Test method for thermal property measurements of metalized ceramic substrates — Part 1: Evaluation of thermal resistance for use in power modules▷ISO 5189:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of metal impurities in silicon dioxide powders using inductively coupled plasma-optical emission spectrometry▷ISO 5618-1:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for GaN crystal surface defects — Part 1: Classification of defects▷ISO 5712:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) — Method for measuring the power generation characteristics of piezoelectric resonant devices for stand-alone power sources▷ISO 5722:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining tensile and shear creep of ceramic adhesive▷ISO 5803:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determination of monoclinic phase in zirconia▷ISO/TS 6857:2024 Fine ceramics (advanced ceramics, advanced technical ceramics) — Physical properties of ceramic composites — Guidelines for determination of void and fibre contents in polished cross section by image analysis▷ISO 10676:2010 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for water purification performance of semiconducting photocatalytic materials by measurement of forming ability of active oxygen▷ISO 10677:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) — Ultraviolet light source for testing semiconducting photocatalytic materials▷ISO 10678:2010 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue▷ISO 11894-1:2013 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for conductivity measurement of ion-conductive fine ceramics — Part 1: Oxide-ion-conducting solid electrolytes▷ISO 13124:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for interfacial bond strength of ceramic materials▷ISO 13125:2013 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for antifungal activity of semiconducting photocatalytic materials□ ISO/TC 206 사무국의 직접적인 책임 하에 개발 중인 표준 32개 중 15개 목록▷ISO/CD 4255 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic matrix composites at high temperature — Determination of axial tensile properties of tubes▷ISO/AWI 4825-2 Fine ceramics (advanced ceramics, advanced technical ceramics) --Test method for thermal property measurements of metalized ceramic substrates — Part 2: Evaluation of heat transfer characteristics for metalized ceramics substrate for power modules▷ISO/PRF 5618-2 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for GaN crystal surface defects — Part 2: Method for determining etch pit density▷ISO/CD 5770 Fine ceramics (advanced ceramics, advanced technical ceramics) — Relative method for determining thermal conductivity of ceramic coatings▷ISO/DIS 10678 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue▷ISO/AWI 10820 Fine ceramics (advanced ceramics, advanced technical ceramics) — Ultraviolet irradiation equipment using UV-A LEDs and optical radiometry for performance test of semiconducting photocatalytic materials▷ISO/DIS 14544 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at high temperature — Determination of compressive properties▷ISO/DIS 14574 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at high temperature — Determination of tensile properties▷ISO/CD 14705 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature▷ISO/WD 15733 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure — Determination of tensile properties▷ISO/AWI 17138 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at room temperature — Determination of flexural strength▷ISO/AWI 17561 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test methods for dynamic elastic moduli of monolithic ceramics at room temperature by sonic resonance and Impulse Excitation Technique (IET)▷ISO/CD 17590 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of tests for reinforcements — Determination of the tensile properties of ceramic filaments at elevated temperature in air using the hot grip technique▷ISO/AWI 17947-1 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of fine silicon nitride powders — Part 1: Wet chemical methods, X-ray fluorescence (XRF) using the fused cast-bead method, carrier-gas hot extraction (CGHE) and combustion methods▷ISO/AWI 18719 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of impurities in yttrium oxide powders using inductively coupled plasma-optical emission spectrometry
-
[특집-기술위원회] TC 197 - 수소 기술(Hydrogen technologies)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 △1988년 TC 192~TC 194 △1989년 TC 195 등이 있다.ISO/TC 197 수소 기술(Hydrogen technologies)과 관련된 기술위원회는 1990년 결성됐다. 사무국은 캐나다 표준위원(Standards Council of Canada, SCC)에서 맡고 있다.위원회는 시아시아 모렐(Mr Siasia Morel)가 책임지고 있다. 현재 의장은 이케다 테츠후미(Mr Tetsufumi IKEDA)이며 임기는 2024년 말까지다. ISO 기술 프로그램 관리자는 키르시 실란데르-반 후넨(Mrs Kirsi Silander-van Hunen), ISO 편집 관리자는 아룬 ABY 파라에카틸(Mr Arun ABY Paraecattil)등이다. 범위는 수소 생산, 저장, 운송, 측정 및 사용을 위한 시스템 및 장치 분야의 표준화다.현재 ISO/TC 197 사무국과 관련해 발행된 표준은 19개며 ISO/TC 197 사무국의 직접적인 책임 하에 발행된 표준은 18개다.ISO/TC 197 사무국과 관련해 개발 중인 표준은 22개며 ISO/TC 197 사무국의 직접적인 책임 하에 개발 중인 표준은 21개다. 참여하고 있는 회원은 35개국, 참관 회원은 18개국이다.□ ISO/TC 197 사무국의 직접적인 책임 하에 발행된 표준 18개 중 15개 목록▷ISO 13984:1999 Liquid hydrogen — Land vehicle fuelling system interface▷ISO 13985:2006 Liquid hydrogen — Land vehicle fuel tanks▷ISO 14687:2019 Hydrogen fuel quality — Product specification▷ISO/TR 15916:2015 Basic considerations for the safety of hydrogen systems▷ISO 16110-1:2007 Hydrogen generators using fuel processing technologies — Part 1: Safety▷ISO 16110-2:2010 Hydrogen generators using fuel processing technologies — Part 2: Test methods for performance▷ISO 16111:2018 Transportable gas storage devices — Hydrogen absorbed in reversible metal hydride▷ISO 17268:2020 Gaseous hydrogen land vehicle refuelling connection devices▷ISO 19880-1:2020 Gaseous hydrogen — Fuelling stations — Part 1: General requirements▷ISO 19880-3:2018 Gaseous hydrogen — Fuelling stations — Part 3: Valves▷ISO 19880-5:2019 Gaseous hydrogen — Fuelling stations — Part 5: Dispenser hoses and hose assemblies▷ISO 19880-8:2019 Gaseous hydrogen — Fuelling stations — Part 8: Fuel quality control▷ISO 19880-8:2019/Amd 1:2021 Gaseous hydrogen — Fuelling stations — Part 8: Fuel quality control — Amendment 1: Alignment with Grade D of ISO 14687▷ISO 19881:2018 Gaseous hydrogen — Land vehicle fuel containers▷ISO 19882:2018 Gaseous hydrogen — Thermally activated pressure relief devices for compressed hydrogen vehicle fuel containers□ ISO/TC 197 사무국의 직접적인 책임 하에 개발 중인 표준 21개 중 15개 목록▷ISO/WD 13984 Liquid Hydrogen Land Vehicle Fueling Protocol▷ISO/AWI 13985 Liquid hydrogen — Land vehicle fuel tanks▷ISO/DIS 14687 Hydrogen fuel quality — Product specification▷ISO/DIS 17268-1 Gaseous hydrogen land vehicle refuelling connection devices — Part 1: Flow capacities up to and including 120 g/s▷ISO/AWI 17268-2 Gaseous hydrogen land vehicle refuelling connection devices — Part 2: Part 2: Flow capacities greater than 120 g/s▷ISO/AWI 17268-3 Gaseous hydrogen land vehicle refuelling connection devices — Part 3: Cryo-compressed hydrogen gas▷ISO/DIS 19880-2 Gaseous hydrogen — Fuelling stations — Part 2: Dispensers and dispensing systems▷ISO/CD 19880-5 Gaseous hydrogen — Fuelling stations — Part 5: Dispenser hoses and hose assemblies▷ISO/DIS 19880-7 Gaseous hydrogen — Fuelling stations — Part 7: Rubber O-rings▷ISO/DIS 19880-8 Gaseous hydrogen — Fuelling stations — Part 8: Fuel quality control▷ISO/DIS 19880-9 Gaseous hydrogen — Fuelling stations — Part 9: Sampling for fuel quality analysis▷ISO/AWI TS 19880-10 Gaseous hydrogen — Fuelling stations — Part 10: Mobile fueling stations▷ISO/DIS 19881 Gaseous hydrogen — Land vehicle fuel containers▷ISO/DIS 19882 Gaseous hydrogen — Thermally activated pressure relief devices for compressed hydrogen vehicle fuel containers▷ISO/AWI 19884-1 Gaseous Hydrogen - Pressure vessels for stationary storage — Part 1: Part 1: general requirements□ ISO/TC 197 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 197/SC 1 Hydrogen at scale and horizontal energy systems ; 발행된 표준 1개, 개발 중인 표준 1개
-
[특집-기술위원회] TC 186 - 수저와 테이블, 장식용 금속 냄비(Cutlery and table and decorative metal hollow-ware)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 등이 있다.ISO/TC 186 수저와 테이블, 장식용 금속 냄비(Cutlery and table and decorative metal hollow-ware)와 관련된 기술위원회는 TC 183, TC 184, TC 185와 마찬가지로 1983년 결성됐다. 사무국은 중국 국가표준화관리위원회(国家标准化管理委员会, Standardization Administration of the P. R. C, SAC)에서 맡고 있다.위원회는 민 두안(Mrs Min Duan)이 책임지고 있다. 현재 의장은 화신 펑( Mr Huaxin Peng)이며 임기는 2025년까지다. ISO 기술 프로그램 관리자는 페트리샤 쿡(Mme Patricia Cook) ISO 편집 관리자는 바주치(M Vincenzo Bazzucchi)등으로 조사됐다.범위는 수저류, 접시류, 테이블, 장식용 금속 할로우 웨어 분야의 표준화다. 참고로 할로우 웨어(hollow-ware)는 움푹한 냄비나 쟁반 같은 그릇을 말한다.현재 ISO/TC 186의 직접적인 책임 하에 발행된 표준은 10개며 참여하고 있는 회원은 11개국, 참관 회원은 17개국이다.□ ISO/TC 186 사무국의 직접적인 책임 하에 발행된 표준 10개 목록▷ISO 4481:1977 Cutlery and flatware — Nomenclature▷ISO 8442-1:1997 Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 1: Requirements for cutlery for the preparation of food▷ISO 8442-2:1997 Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 2: Requirements for stainless steel and silver-plated cutlery▷ISO 8442-3:1997 Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 3: Requirements for silver-plated table and decorative holloware▷ISO 8442-4:1997 Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 4: Requirements for gold plated cutlery▷ISO 8442-5:2004 Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 5: Specification for sharpness and edge retention test of cutlery▷ISO 8442-6:2000 Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 6: Lightly silver-plated table holloware protected by lacquer▷ISO 8442-7:2000 Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 7: Requirements for table cutlery made of silver, other precious metals and their alloys▷ISO 8442-8:2000 Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 8: Requirements for silver table and decorative holloware▷ISO 8442-9:2018 Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 9: Requirements for ceramic knives
-
[특집-기술위원회] TC 183 - 구리, 납, 아연, 니켈 광석 및 정광(Copper, lead, zinc and nickel ores and concentrates)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 등이 있다.ISO/TC 183 구리, 납, 아연, 니켈 광석 및 정광(Copper, lead, zinc and nickel ores and concentrates)과 관련된 기술위원회는 1983년 결성됐다. 사무국은 오스트레일리아 표준협회(Standards Australia, SA)에서 맡고 있다.위원회는 재스민 브린스미드(Ms Jasmine Brinsmead)가 책임지고 있으며 현재 의장은 마크 오드와이어(Mr Mark O'Dwyer)이며 임기는 2026년까지다. ISO 기술 프로그램 관리자는 스테판 소바쥬(M Stéphane Sauvage), ISO 편집 관리자는 니콜라 페루(Ms Nicola Perou) 등으로 조사됐다.범위는 샘플링, 화학적 분석 및 물리적 테스트를 포함해 구리, 납, 아연, 니켈 광석 및 정광(농축물), 제련소 잔류물 분야의 표준화다.현재 ISO/TC 183 사무국의 직접적인 책임 하에 발행된 표준은 28개며 ISO/TC 183 사무국의 직접적인 책임 하에 개발 중인 표준은 4개다. 참여하고 있는 회원은 8개국, 참관 회원은 26개국이다.□ ISO/TC 183 사무국의 직접적인 책임 하에 발행된 표준 28개 중 15개 목록▷ISO 3483:2023 Copper and zinc sulfide concentrates — Determination of thallium — Acid digestion and inductively coupled plasma-mass spectrometry▷ISO 9599:2015 Copper, lead, zinc and nickel sulfide concentrates — Determination of hygroscopic moisture content of the analysis sample — Gravimetric method▷ISO 10251:2006 Copper, lead, zinc and nickel concentrates — Determination of mass loss of bulk material on drying▷ISO 10258:2018 Copper sulfide concentrates — Determination of copper content — Titrimetric methods▷ISO 10378:2016 Copper, lead and zinc sulfide concentrates — Determination of gold and silver — Fire assay gravimetric and flame atomic absorption spectrometric method▷ISO 10469:2006 Copper sulfide concentrates — Determination of copper — Electrogravimetric method▷ISO 11441:1995 Lead sulfide concentrates — Determination of lead content — Back titration of EDTA after precipitation of lead sulfate▷ISO 11790:2017 Copper, lead, zinc and nickel concentrates — Guidelines for the inspection of mechanical sampling systems▷ISO 11794:2017 Copper, lead, zinc and nickel concentrates — Sampling of slurries▷ISO 12739:2006 Zinc sulfide concentrates — Determination of zinc — Ion-exchange/EDTA titrimetric method▷ISO 12740:1998 Lead sulfide concentrates — Determination of silver and gold contents — Fire assay and flame atomic absorption spectrometric method using scorification or cupellation▷ISO 12742:2020 Copper, lead and zinc sulfide concentrates — Determination of transportable moisture limits — Flow-table method▷ISO 12743:2021 Copper, lead, zinc and nickel concentrates — Sampling procedures for determination of metal and moisture content▷ISO 12744:2006 Copper, lead, zinc and nickel concentrates — Experimental methods for checking the precision of sampling▷ISO 12745:2008 Copper, lead and zinc ores and concentrates — Precision and bias of mass measurement techniques□ ISO/TC 183 사무국의 직접적인 책임 하에 개발 중인 표준 4개 목록▷ISO/CD 11456 Copper and zinc sulfide concentrates — Determination of silver content — Acid digestion and flame atomic absorption or inductively coupled plasma emission spectrometric method▷ISO/AWI 12739 Zinc sulfide concentrates — Determination of zinc — Ion-exchange/EDTA titrimetric method▷ISO/CD 12744 Copper, lead, zinc and nickel concentrates — Experimental methods for checking the precision of sampling▷ISO/CD 13548 Copper, lead and zinc sulfide concentrates — Determination of fluorine content by sodium hydroxide fusion and fluoride ion selective electrode detection
-
[특집-기술위원회] TC 174 - 보석 및 귀금속(Jewellery and precious metals)… 번호 부여 시스템, 반지 크기, 귀금속 색상 및 코팅, 다이아몬드 등 주얼리스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 등도 포함된다.ISO/TC 174 보석 및 귀금속(Jewellery and precious metals)과 관련된 기술위원회는 TC 171, TC 172, TC 173과 마찬가지로 1978년 결성됐다. 사무국은 독일 표준화기구(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다.위원회는 페트라 비쇼프((FH) Petra Bischoff)가 책임지고 있으며 현재 의장은 조나단 조드리(Mr Jonathan Jodry)이며 임기는 2024년까지다.ISO 기술 프로그램 관리자는 블란딘 가르시아(Mme Blandine Garcia), ISO 편집 관리자는 빈센조 바주치(M Vincenzo Bazzucchi) 등으로 조사됐다.범위는 번호 부여 시스템, 반지 크기, 귀금속 색상 및 코팅, 다이아몬드 등 주얼리 분야와 분석, 샘플링, 불순물 등 귀금속 분야 표준화다.현재 ISO/TC 174 사무국의 직접적인 책임 하에 발행된 표준은 21개며 ISO/TC 173 사무국의 직접적인 책임 하에 개발 중인 표준은 10개다. 참여하고 있는 회원은 19개국, 참관 회원은 25개국이다.□ ISO/TC 174 사무국의 직접적인 책임 하에 발행된 표준 21개 중 15개 목록▷ISO 5724:2023 Jewellery and precious metals — Determination of very high purity gold — Difference method using ICP-MS▷ISO 8653:2016 Jewellery — Ring-sizes — Definition, measurement and designation▷ISO 8654:2018 Jewellery — Colours of gold alloys — Definition, range of colours and designation▷ISO 8654:2018/Amd 1:2019 Jewellery — Colours of gold alloys — Definition, range of colours and designation — Amendment 1▷ISO 9202:2019 Jewellery and precious metals — Fineness of precious metal alloys▷ISO 10713:1992 Jewellery — Gold alloy coatings▷ISO 11210:2023 Jewellery and precious metals — Determination of platinum — Gravimetry using ammonium chloride▷ISO 11426:2021 Jewellery and precious metals — Determination of gold — Cupellation method (fire assay)▷ISO 11427:2014 Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using potassium bromide▷ISO 11490:2023 Jewellery and precious metals — Determination of palladium — Gravimetry using dimethylglyoxime▷ISO 11494:2019 Jewellery and precious metals — Determination of platinum in platinum alloys — ICP-OES method using an internal standard element▷ISO 11495:2019 Jewellery and precious metals — Determination of palladium in palladium alloys — ICP-OES method using an internal standard element▷ISO 11596:2021 Jewellery and precious metals — Sampling of precious metals and precious metal alloys▷ISO 13756:2015 Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using sodium chloride or potassium chloride▷ISO 15093:2020 Jewellery and precious metals — Determination of high purity gold, platinum and palladium — Difference method using ICP-OES□ ISO/TC 174 사무국의 직접적인 책임 하에 개발 중인 표준 10개 목록▷ISO/PRF 6893 Jewellery and precious metals — Inspection of batches of small diamonds — Terminology, classification and test methods▷ISO/DIS 10713 Jewellery and precious metals — Gold alloy coatings▷ISO/PRF 11427 Jewellery and precious metals — Determination of silver — Potentiometry using potassium bromide▷ISO/PRF 13756 Jewellery and precious metals — Determination of silver — Potentiometry using sodium chloride or potassium chloride▷ISO/DIS 18214 Jewellery and precious metals — Determination of high purity gold, silver, platinum and palladium — Difference method using SPARK-OES▷ISO/AWI 19376-1 Jewellery and precious metals — Vocabulary — Part 1: Precious metals and units▷ISO/CD 19919 Jewellery and precious metals — Determination of silver — ICP-OES method using an internal standard element▷ISO/AWI 21261-1 Jewellery and precious metals — Responsible precious metals — Part 1: General requirements for responsible precious metals▷ISO/AWI 21261-2 Jewellery and precious metals — Responsible precious metals — Part 2: Minimum rules and procedures for conformity assessment schemes▷ISO/AWI 21261-3 Jewellery and precious metals — Responsible precious metals — Part 3: Requirements for recycled gold
-
[특집-기술위원회] TC 170 - 수술도구(Surgical instruments)… 겸자·가위·메스·리액터(견인기)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.△1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 △1976년 TC 165, TC 166 등도 포함된다.ISO/TC 170 수술도구(Surgical instruments)와 관련된 기술위원회는 TC 167, TC 168과 마찬가지로 1977년 결성됐다. 사무국은 독일 표준화기구(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다.위원회는 페트라 비쇼프(Mrs Dipl.-Ing. (FH) Petra Bischoff)가 책임지고 있으며 현재 의장은 토드 포프(Mr Todd Pope)다. ISO 기술 프로그램 관리자는 페트리샤 쿡(Mme Patricia Cook), ISO 편집 관리자는 발레리아 아가멤논(Ms Valeria Agamennone) 등으로 조사됐다.범위는 겸자, 가위, 메스, 리액터(견인기)와 같은 수술 도구 분야의 표준화다. 단, ISO / TC 106 - 치과(Dentistry), ISO / TC 150 - 수술용임플란트(Implants for surgery)에서 다루고 있는 특수 도구는 제외한다.현재 ISO/TC 170 사무국의 직접적인 책임 하에 발행된 표준은 5개며 ISO/TC 170 사무국의 직접적인 책임 하에 개발 중인 표준은 7개다. 참여하고 있는 회원은 9개국, 참관 회원은 24개국이다.□ ISO/TC 170 사무국의 직접적인 책임 하에 발행된 표준 5개 목록▷ISO 7151:1988 Surgical instruments — Non-cutting, articulated instruments — General requirements and test methods▷ISO 7153-1:2016 Surgical instruments — Materials — Part 1: Metals▷ISO 7740:1985 Instruments for surgery — Scalpels with detachable blades — Fitting dimensions▷ISO 7741:1986 Instruments for surgery — Scissors and shears — General requirements and test methods▷ISO 13402:1995 Surgical and dental hand instruments — Determination of resistance against autoclaving, corrosion and thermal exposure□ ISO/TC 170 사무국의 직접적인 책임 하에 개발 중인 표준 7개 목록▷ISO/CD 6335-1 Surgical instruments — Staplers — Part 1: Vocabulary▷ISO/CD 6335-2 Surgical instruments — Staplers — Part 2: General requirements▷ISO/FDIS 7151 Surgical instruments — Non-cutting, articulated instruments — General requirements and test methods▷ISO/CD 7554-1 Surgical instruments — Terms, measuring methods and tests — Part 1: Vocabulary▷ISO/CD 7554-2 Surgical instruments — Terms, measuring methods and tests — Part 2: Measuring methods for the determination of basic measures of surgical standard instruments▷ISO/CD 7554-3 Surgical instruments -Terms, measuring methods and tests — Part 3: Test methods▷ISO/DIS 13402 Surgical and dental hand instruments — Determination of resistance against autoclaving, corrosion and thermal exposure
-
[특집-기술위원회] TC 165 - 목재 구조물(Timber structures)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.△1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.ISO/TC 165 목재 구조물(Timber structures)과 관련된 기술위원회는 1976년 결성됐다. 사무국은 캐나다 표준위원회(Standards Council of Canada, SCC)에서 맡고 있다.위원회는 폴 예를리히(Mr Paul Jaehrlich)가 책임지고 있으며 현재 의장은 잉 추이(Mr Ying Chui)이며 임기는 2024년까지다. ISO 기술 프로그램 관리자는 안나 카테리나 로시(Dr Anna Caterina Rossi), ISO 편집 관리자는 빈센조 바주치(M Vincenzo Bazzucchi) 등으로 조사됐다.범위는 목재, 목재 기반 패널, 기타 목재 기반 제품, 관련 목질계 섬유 재료 등의 구조적 적용에 관한 표준화다. 또한 디자인 요구사항, 재료, 제품, 부품, 구성품의 구조적 특성, 성능 및 설계 값, 관련 구조적, 기계적, 물리적 특성과 성능을 조성하기 위한 테스트 방법 및요구 사항 등도 포함된다.참조 : TC 165의 주제가 구조적이지 않은 목적으로 관련 재료 또는 제품(예 : TC 89 또는 TC 218)의 기술 위원회 주제이기도 한 경우 관련 기술 위원회와 강력한 연락망이 구축된다.현재 ISO/TC 165 사무국의 직접적인 책임 하에 발행된 표준은 54개며 ISO/TC 165 사무국의 직접적인 책임하에 개발 중인 표준은 3개다. 참여하고 있는 회원은 30개국, 참관 회원은 34개국이다.□ ISO/TC 165 사무국의 직접적인 책임 하에 발행된 표준 54개 중 15개 목록▷ISO 5257:2023 Bamboo structures — Engineered bamboo products — Test methods for determination of mechanical properties using small size specimens▷ISO 6891:1983 Timber structures — Joints made with mechanical fasteners — General principles for the determination of strength and deformation characteristics▷ISO 8375:2017 Timber structures — Glued laminated timber — Test methods for determination of physical and mechanical properties▷ISO 8969:2011 Timber structures — Testing of punched metal plate fasteners and joints▷ISO 8970:2020 Timber structures — Testing of joints made with mechanical fasteners — Requirements for timber density▷ISO 9087:1998 Wood - Determination of nail and screw holding power under axial load application▷ISO 9709:2018 Structural timber — Visual strength grading — Basic principles▷ISO 10983:2014 Timber — Finger joints — Minimum production requirements and testing methods▷ISO 10984-1:2009 Timber structures — Dowel-type fasteners — Part 1: Determination of yield moment▷ISO 10984-2:2009 Timber structures — Dowel-type fasteners — Part 2: Determination of embedding strength▷ISO 12122-1:2014 Timber structures — Determination of characteristic values — Part 1: Basic requirements▷ISO 12122-2:2014 Timber structures — Determination of characteristic values — Part 2: Sawn timber▷ISO 12122-3:2016 Timber structures — Determination of characteristic values — Part 3: Glued laminated timber▷ISO 12122-4:2017 Timber structures — Determination of characteristic values — Part 4: Engineered wood products▷ISO 12122-5:2018 Timber structures — Determination of characteristic values — Part 5: Mechanical connections□ ISO/TC 165 사무국의 직접적인 책임 하에 개발중인 표준 3개 목록▷ISO/CD TR 3446 Timber Structures – Determination of characteristic values of sawn timber from tests on Small Clear Wood Specimens▷ISO/DIS 7567 Bamboo structures — Glued laminated bamboo — Product specifications▷ISO/AWI 16229 Timber structures — Laminated strand lumber and oriented strand lumber — Structural properties
-
[특집-기술위원회] TC 164 - 금속의 기계적 테스트(Mechanical testing of metals)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.△1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 등도 포함된다.ISO/TC 164 금속의 기계적 테스트(Mechanical testing of metals)와 관련된 기술위원회는 TC 162, TC 163과 마찬가지로 1975년 결성됐다. 사무국은 일본산업표준조사회(日本産業標準調査会, Japanese Industrial Standards Committee, JISC)에서 맡고 있다.위원회는 히토시 요시다(Mr Hitoshi Yoshida)가 책임지고 있으며 현재 의장은 마사아키 타부치(Dr Masaaki Tabuchi)이며 임기는 2026년까지다. ISO 기술 프로그램 관리자는 메르세 페레 에르난데스(Mme Mercè Ferrés Hernández), ISO 편집 관리자는 앤 기엣(Ms Anne Guiet) 등으로 조사됐다.범위는 금속 재료의 특성을 결정하는 데 사용되는 장비의 검증 및 교정을 포함해 기계적 테스트 방법의 표준화다. 단, 방법의 적용 및 얻은 결과에 대한 책임은 제외한다. 단 제품위원회가 특정 재료에 적합한 테스트를 개발하는 것을 배제하지 않는다.현재 ISO/TC 164 사무국과 관련해 발행된 표준은 95개며 이중 사무국의 직접적인 책임 하에 발행된 표준은 1개다. ISO/TC 164 사무국과 관련해 개발 중인 표준은 32개며 사무국의 직접적인 책임하에 개발 중인 표준은 2개다. 참여하고 있는 회원은 22개국, 참관 회원은 29개국이다.□ ISO/TC 164 사무국의 직접적인 책임 하에 발행된 표준 1개 목록▷ISO 23718:2007 Metallic materials — Mechanical testing — Vocabulary□ ISO/TC 164 사무국의 직접적인 책임 하에 개발중인 표준 2개 목록▷ISO/AWI TR 8463 Strategy for a Common Frame Work to Determine Measurement Uncertainty in Mechanical Testing▷ISO/WD TS 23718 Metallic materials — Mechanical testing — Vocabulary□ ISO/TC 163 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 164/SC 1 Uniaxial testing ; 발행된 표준 13개, 개발 중인 표준 8개▷ISO/TC 164/SC 2 Ductility testing ; 발행된 표준 28개, 개발 중인 표준 2개▷ISO/TC 164/SC 3 Hardness testing ; 발행된 표준 26개, 개발 중인 표준 7개▷ISO/TC 164/SC 4 Fatigue, fracture and toughness testing ; 발행된 표준 27개, 개발 중인 표준 13개
-
[특집-기술위원회] TC 156 - 금속 및 합금의 부식(Corrosion of metals and alloys)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.△1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 등도 포함된다.ISO/TC 156 금속 및 합금의 부식(Corrosion of metals and alloys)과 관련된 기술위원회는 1974년 결성됐다. 사무국은 중국 국가표준화관리위원회(国家标准化管理委员会, Standardization Administration of the P. R. C, SAC)에서 맡고 있다.위원회는 호우 지에(Mrs Jie Hou)이 책임지고 있다. 현재 의장은 평 챠오(Mr Chao Feng)로 임기는 2025년까지다. ISO 기술 프로그램 관리자는 추 주안우(Ms Chuanyu Zou), ISO 편집 관리자는 엔 기엣(Ms Anne Guiet) 등으로 조사됐다.범위는 부식 테스트 방법, 부식 방지 방법 및 부식 제어 엔지니어링 수명주기를 포함한 금속 및 합금 부식 분야의 표준화다. ISO 내에서 이러한 분야의 활동에 대한 일반적인 조정자 역할도 수행한다.현재 ISO/TC 156 사무국과 관련해 발행된 표준은 118개며 직접적인 책임 하에 발행된 표준은 114개다. ISO/TC 156 사무국과 관련해 개발 중인 표준은 28개며 직접적인 책임하에 개발중인 표준은 26개다. 참여하고 있는 회원은 24개국, 참관 회원은 26개국이다.□ ISO/TC 156 사무국의 직접적인 책임 하에 발행된 표준 114개 중 15개 목록▷ISO 3079:2022 Two-electrode method using acetic acid to measure pitting potential of aluminium and aluminium alloys in chloride solutions▷ISO 3651-1:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)▷ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid▷ISO 3651-3:2017 Determination of resistance to intergranular corrosion of stainless steels — Part 3: Corrosion test for low-Cr ferritic stainless steels▷ISO 4212:2023 Corrosion of metals and alloys — Method of oxalic acid etching test for intergranular corrosion of austenitic stainless steel▷ISO 4215:2022 Corrosion of metals and alloys — Test method for high-temperature corrosion testing of metallic materials by thermogravimetry under isothermal or cyclic conditions▷ISO 4631:2023 Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion potential (E-CLCP) for Ti alloys fabricated via additive manufacturing method in simulated biomedical solutions▷ISO 4680:2022 Corrosion of metals and alloys — Uniaxial constant-load test method for evaluating susceptibility of metals and alloys to stress corrosion cracking in high-purity water at high temperatures▷ISO 4905:2023 Corrosion of metals and alloys — Electrochemical test methods for high-temperature corrosion testing of metallic materials in molten salts▷ISO 5156:2022 Corrosion of metals and alloys — Corrosion test method for disinfectant — Total immersion method▷ISO 5668:2023 Corrosion of metals and alloys — Guidelines and requirements for corrosion testing in simulated environment of deep-sea water▷ISO 6509-1:2014 Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 1: Test method▷ISO 6509-2:2017 Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 2: Assessment criteria▷ISO 7384:1986 Corrosion tests in artificial atmosphere — General requirements▷ISO 7441:2015 Corrosion of metals and alloys — Determination of bimetallic corrosion in atmospheric exposure corrosion tests □ ISO/TC 156 사무국의 직접적인 책임 하에 개발 중인 표준 26개 중 15개 목록▷ISO/DIS 5929 Corrosion of Metals and Alloys — Test and evaluation method for the corrosion of steel bar embedded in concrete structure exposed to total corrosion zones in marine environments▷ISO/DIS 7054 Corrosion of metals and alloys — Wiping method for measurements of gases and particles on real structures and equipment▷ISO 7539-6:2018/DAmd 1 Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement — Amendment 1▷ISO/DIS 8044 Corrosion of metals and alloys — Vocabulary▷ISO 8407:2021/CD Amd 1 Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens — Amendment 1▷ISO/TR 8547 Corrosion of metals and alloys — Exposure test results in the Asian Monsoon region▷ISO/AWI TR 8564 Corrosion of metals and alloys — Reference data for ISO16539 Method B▷ISO 9227:2022/DAmd 1 Corrosion tests in artificial atmospheres — Salt spray tests — Amendment 1: Footnote of warning▷ISO/CD 9350 Corrosion of Metals and Alloys — Testing method for corrosion resistance for hafnium in the hightemperature and pressure▷ISO/DIS 9351 Galvanic anodes for cathodic protection in seawater and saline sediments▷ISO/DIS 9812 Corrosion of metals and alloys — Corrosion test method for disinfectant — Spray test method▷ISO 10062:2022/DAmd 1 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) — Amendment 1: Footnote of warning▷ISO/CD TR 11303 Corrosion of metals and alloys — Guidelines for selection of protection methods against atmospheric corrosion▷ISO 11782-2:1998/DAmd 1 Corrosion of metals and alloys — Corrosion fatigue testing — Part 2: Crack propagation testing using precracked specimens — Amendment 1▷ISO/AWI 16364 Guidelines for Galvanic Corrosion Control□ ISO/TC 156 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 156/SC 1 Corrosion control engineering life cycle : 발행된 표준 4개, 개발 중인 표준 2개