검색결과
-
중소벤처기업부, 탄소국경조정제도(CBAM) 대응 기반(인프라)구축 지원사업 참여기업 2차 모집개시중소벤처기업부에 따르면 4월 7일(화)~5월 31일(금)까지 2024년 중소기업 탄소국경조정제도(CBAM) 대응 기반(인프라)구축 지원사업에 참여할 기업을 모집(2차)한다. 탄소국경조정제도(Carbon Border Adjustment Mechanism, 이하 CBAM)는 ‘23년 10월부터 시범 시행되었다. 유럽연합(EU)으로 탄소 집약적 제품을 수출 할 경우 생산과정에서 배출한 탄소량에 상응하는 인증서 구매를 의무화하는 제도다. 탄소집약적 제품은 철강, 알루미늄, 비료, 수소, 시멘트, 전력 등 6개 품목으로 ’24년과 ‘25년 2년간의 전환기간(보고의무만 있음)을 거쳐 ‘26년부터 본격 시행된다. 중소기업 탄소국경조정제도(CBAM) 대응 기반(인프라)구축 사업은 탄소배출량 측정‧보고‧검증 비용을 지원해 EU 수출기업의 관세 부담을 줄이는 등 국제적(글로벌) 탄소 규제에 선제적으로 대응하기 위해 올해 신설됐다. 탄소국경조정제도(CBAM) 대상 6개 품목을 EU로 직‧간접 수출하는 중소기업을 대상으로 제품별 탄소배출량 산정‧감축 상담(컨설팅)과 EU 인정기관의 검증보고서 발급을 동시에 지원할 예정이다. 현장을 방문하는 전문인력에게 맞춤형 상담(컨설팅)을 지원 받을 수 있는 분야는 △생산공정 분석 △제품별 배출량 산정을 위한 공정 분할 △배출량 산정 경계 설정 △EU 측 수입업자에 배출량 보고 등이다. 우리 중소기업이 탄소국경조정제도(CBAM)라는 제도를 이해하고 대응할 수 있도록 EU에서 인정한 기관이 본 사업의 검증기관으로 참여해 현지 노하우를 전수하는 등 직접적인 도움을 줄 것으로 기대된다. 중소벤처기업부 김우순 기술혁신정책관은 “26년 EU 탄소국경조정제도(CBAM)의 본격 시행에 대비해 우리 중소기업은 지금부터 준비할 필요가 있다”며, “본 사업을 통해 EU에 수출하는 중소기업의 탄소국경조정제도(CBAM) 대응 부담을 완화해 나가겠다”고 강조했다. 참고로 2024년 중소기업 탄소국경조정제도(CBAM) 대응 기반(인프라)구축 지원사업 모집공고의 자세한 내용은 중소벤처기업부 누리집(www.mss.go.kr), 중소벤처24 누리집(www.smes.go.kr), ESG 통합플랫폼(kdoctor.kosmes.or.kr/esgplatform) 등에서 확인할 수 있다.
-
[특집-ISO/IEC JTC 1/SC 17 활동] 35. Result of voting on SR Ballot for ISO/IEC 7811-7(N 7345)2023년 12월04일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Result of voting on SR ballot for ISO/IEC 7811-7(N 7345)' 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서인 'Result of voting on SR ballot for ISO/IEC 7811-7'은 ISO/IEC 7811-7:2018 (Ed 3)(restricted access)와 관련한 투표결과를 포함하고 있다.ISO/IEC 7811-7:2018 (Ed 3)(restricted access)는 Identification cards — Recording technique — Part 7: Magnetic stripe: High coercivity, high density에 관한 것이다.N 7345 문서는 N 7338, N 7339, N 7340, N 7341, N 7342, N 7343, N 7344 문서와 마찬가지로 2023년 7월15일~12월2일 동안 투표가 진행됐다. 기간 내 각 회원국들은 안건에 대해 의사를 표명했다.투표 항목은 △Confirm △Revise/Amend △Withdraw △Abstain lack of consensus △Abstain lack of national expert input △Stabilize △Q.2 △Q.3 △Q.4 △Q.5 △Q.6 등 총 11개다. 구체적인 질문 내용은 다음과 같다.▷ Q.1 Recommended action▷ Q.2 Has this International Standard been adopted or is it intended to be adopted in the future as a national standard or other publication?▷ Q.3 Is the national publication identical to the International Standard or was it modified?▷ Q.4 If this International Standard has not been nationally adopted, is it applied or used in your country without national adoption or are products/processes/services used in your country based on this standard?▷ Q.5 Is this International Standard, or its national adoption, referenced in regulations in your country?▷ Q.6 If the committee decides to revise or amend, do you propose an expert and/or project leader for the development of that project?참고로 11개 항목 중 투표 결과를 살펴보면 △Confirm 12개국 △Revise/Amend 1개국 △Abstain lack of national expert input 22개국 등으로 나타났다.- 이하 생략 -
-
[특집-ISO/IEC JTC 1/SC 17 활동] 34. Result of voting on SR ballot for ISO/IEC 7811-6(N 7344)2023년 12월04일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Result of voting on SR ballot for ISO/IEC 7811-6(N 7344)' 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서인 'Result of voting on SR ballot for ISO/IEC 7811-6'은 ISO/IEC 7811-6:2018 (Ed 5)(restricted access)와 관련한 투표결과를 포함하고 있다.ISO/IEC 7811-6:2018 (Ed 5)(restricted access)는 Identification cards — Recording technique — Part 6: Magnetic stripe: High coercivity에 관한 것이다.N 7344 문서는 N 7338, N 7339, N 7340, N 7341, N 7342, N 7343 문서와 마찬가지로 2023년 7월15일~12월2일 동안 투표가 진행됐다. 기간 내 각 회원국들은 안건에 대해 의사를 표명했다.투표 항목은 △Confirm △Revise/Amend △Withdraw △Abstain lack of consensus △Abstain lack of national expert input △Stabilize △Q.2 △Q.3 △Q.4 △Q.5 △Q.6 등 총 11개다. 구체적인 질문 내용은 다음과 같다.▷ Q.1 Recommended action▷ Q.2 Has this International Standard been adopted or is it intended to be adopted in the future as a national standard or other publication?▷ Q.3 Is the national publication identical to the International Standard or was it modified?▷ Q.4 If this International Standard has not been nationally adopted, is it applied or used in your country without national adoption or are products/processes/services used in your country based on this standard?▷ Q.5 Is this International Standard, or its national adoption, referenced in regulations in your country?▷ Q.6 If the committee decides to revise or amend, do you propose an expert and/or project leader for the development of that project?참고로 11개 항목 중 투표 결과를 살펴보면 △Confirm 11개국 △Revise/Amend 1개국 △Abstain lack of national expert input 23개국 등으로 나타났다.- 이하 생략 -
-
[특집-ISO/IEC JTC 1/SC 17 활동] 33. Result of voting on SR ballot for ISO/IEC 7811-2(N 7343)2023년 12월04일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Result of voting on SR ballot for ISO/IEC 7811-2(N 7343)' 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서인 'Result of voting on SR ballot for ISO/IEC 7811-2'는 ISO/IEC 7811-2:2018 (Ed 5)(restricted access)와 관련한 투표결과를 포함하고 있다. ISO/IEC 7811-2:2018 (Ed 5)(restricted access)는 Identification cards — Recording technique — Part 2: Magnetic stripe: Low coercivity에 관한 것이다. N 7343 문서는 N 7338, N 7339, N 7340, N 7341, N 7342 문서와 마찬가지로 2023년 7월15일~12월2일 동안 투표가 진행됐다. 기간 내 각 회원국들은 안건에 대해 의사를 표명했다.투표 항목은 △Confirm △Revise/Amend △Withdraw △Abstain lack of consensus △Abstain lack of national expert input △Stabilize △Q.2 △Q.3 △Q.4 △Q.5 △Q.6 등 총 11개다. 구체적인 질문 내용은 다음과 같다.▷ Q.1 Recommended action▷ Q.2 Has this International Standard been adopted or is it intended to be adopted in the future as a national standard or other publication?▷ Q.3 Is the national publication identical to the International Standard or was it modified?▷ Q.4 If this International Standard has not been nationally adopted, is it applied or used in your country without national adoption or are products/processes/services used in your country based on this standard?▷ Q.5 Is this International Standard, or its national adoption, referenced in regulations in your country?▷ Q.6 If the committee decides to revise or amend, do you propose an expert and/or project leader for the development of that project?참고로 11개 항목 중 투표 결과를 살펴보면 △Confirm 12개국 △Revise/Amend 1개국 △Abstain lack of consensus 1개국 △Abstain lack of national expert input 21개국 등으로 나타났다. - 이하 생략 -
-
인공지능 표준에 대한 산업계의 관심과 열기 가득산업통상자원부 국가기술표준원(원장 진종욱, 이하 국표원)에 따르면 4월 24일(수요일) 'AI 국제표준 오픈 워크숍'에서 인공지능(AI) 국제표준 리더들과 국내 AI기업·학계·연구기관 전문가들이 함께 표준으로 소통했다. 대한상공회의소 의원회의실에서 개최된 ‘AI 국제표준 오픈 워크숍’은 국제표준화기구(ISO)와 국제전기기술위원회(IEC)가 공동 설립한 AI 국제표준화 위원회(ISO/IEC JTC1 SC42, 이하 SC42)와 함께 공동 개최됐다. 워크숍에는 구글, 엔비디아 등 AI 국제표준 작업반(WG) 리더들과 KT, 네이버 등 국내 산학연 AI 전문가 140여 명이 참석했다. 국내에서 처음 개최되는 SC 42 총회의 일환인 특별 공개 행사로서, AI 국제표준에 접근하기 어려운 관련 기업 및 전문가들은 현재 개발 중인 최신 국제표준의 핵심 사안을 각 표준 WG의 임원진으로부터 직접 들을 수 있어서 그 의미가 컸다. 워크숍에서는 SC 42 산하 각 WG의 주요 AI 국제표준, 국내 기업의 AI 추진 내용이 발표됐. 특히 신뢰성 WG에서 구글의 레노라 짐머맨(Lenora Zimmerman) 프로젝트 리더는 AI가 개인과 사회에 해를 끼칠 수 있는 사회적·윤리적 고려사항과 이를 해결할 수 있는 방안에 대한 표준을 소개했다. AI 안전 WG에서 엔비디아의 리카도 마리아니(Riccardo Mariani) 의장은 AI 시스템의 안전성을 보장하기 위한 설계·개발·검증을 위한 요구사항 표준을 설명했다. 또한 AI 머신러닝 성능평가, AI 기반 헬스케어 정보 표준 등의 소개와 국내 KT, 네이버, 산업기술시험원의 AI 추진 동향이 발표되는 등 참석자들의 관심과 열기가 이어졌다. 최근 AI 기술의 급속한 발전과 함께, 유럽 AI법, 미국 AI 행정명령 등의 이행을 위해 SC 42에서 개발한 국제표준 반영이 전망되고 있어, AI 표준은 기업 등의 생존과 직결될 수 있는 등 그 어느 때보다 중요하다. 진종욱 국표원장은 “기업들의 AI 표준에 대한 높은 관심을 확인하였으며, 앞으로도 이러한 표준 논의의 장을 지속적으로 마련하겠다”고 밝혔다. 워크숍에 초청된 이경우 AI디지털비서관은 “AI는 전산업에 걸쳐 혁신을 주도하는 게임체인저라 할 수 있다”면서, “정부는 우리나라가 AI 기술 강국으로 도약할 수 있도록 지원하고, 연관된 AI 반도체 산업을 집중 육성해 나가겠다”고 강조했다.
-
[특집-ISO/IEC JTC 1/SC 17 활동] 32. Result of voting on SR Ballot for ISO/IEC 7811-1(N 7342)2023년 12월04일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Result of voting on SR Ballot for ISO/IEC 7811-1(N 7342)' 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서인 'Result of voting on SR Ballot for ISO/IEC 7811-1'는 ISO/IEC 7811-1:2018 (Ed 5)(restricted access)와 관련한 투표결과를 포함하고 있다. ISO/IEC 7811-1:2018 (Ed 5)(restricted access)는 Identification cards — Recording technique — Part 1: Embossing에 관한 것이다. N 7342 문서는 N 7338, N 7339, N 7340, N 7341 문서와 마찬가지로 2023년 7월15일~12월2일 동안 투표가 진행됐다. 기간 내 각 회원국들은 안건에 대해 의사를 표명했다.투표 항목은 △Confirm △Revise/Amend △Withdraw △Abstain lack of consensus △Abstain lack of national expert input △Stabilize △Q.2 △Q.3 △Q.4 △Q.5 △Q.6 등 총 11개다. 구체적인 질문 내용은 다음과 같다.▷ Q.1 Recommended action▷ Q.2 Has this International Standard been adopted or is it intended to be adopted in the future as a national standard or other publication?▷ Q.3 Is the national publication identical to the International Standard or was it modified?▷ Q.4 If this International Standard has not been nationally adopted, is it applied or used in your country without national adoption or are products/processes/services used in your country based on this standard?▷ Q.5 Is this International Standard, or its national adoption, referenced in regulations in your country?▷ Q.6 If the committee decides to revise or amend, do you propose an expert and/or project leader for the development of that project?참고로 11개 항목 중 투표 결과를 살펴보면 △Confirm 12개국 △Revise/Amend 1개국 △Abstain lack of consensus 1개국 △Abstain lack of national expert input 21개국 등으로 나타났다. - 이하 생략 -
-
[특집-ISO/IEC JTC 1/SC 17 활동] 31. Result of voting on SR Ballot for ISO/IEC 18745-1(N 7341)2023년 12월04일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Result of voting on SR Ballot for ISO/IEC 18013-1(N 7340)' 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서인 'Result of voting on SR Ballot for ISO/IEC 18745-1'는 ISO/IEC 18745-1:2018 (Ed 2)(restricted access)와 관련한 투표결과를 포함하고 있다. ISO/IEC 18745-1:2018 (Ed 2)(restricted access)는 Test methods for machine readable travel documents (MRTD) and associated devices — Part 1: Physical test methods for passport books (durability)에 관한 것이다. N 7341 문서는 N 7338, N 7339, N 7340 문서와 마찬가지로 2023년 7월15일~12월2일 동안 투표가 진행됐다. 기간 내 각 회원국들은 안건에 대해 의사를 표명했다.투표 항목은 △Confirm △Revise/Amend △Withdraw △Abstain lack of consensus △Abstain lack of national expert input △Stabilize △Q.2 △Q.3 △Q.4 △Q.5 △Q.6 등 총 11개다. 구체적인 질문 내용은 다음과 같다.▷ Q.1 Recommended action▷ Q.2 Has this International Standard been adopted or is it intended to be adopted in the future as a national standard or other publication?▷ Q.3 Is the national publication identical to the International Standard or was it modified?▷ Q.4 If this International Standard has not been nationally adopted, is it applied or used in your country without national adoption or are products/processes/services used in your country based on this standard?▷ Q.5 Is this International Standard, or its national adoption, referenced in regulations in your country?▷ Q.6 If the committee decides to revise or amend, do you propose an expert and/or project leader for the development of that project?참고로 11개 항목 중 투표 결과를 살펴보면 △Confirm 9개국 △Revise/Amend 4개국 △Abstain lack of national expert input 22개국 등으로 나타났다. - 이하 생략 -
-
[특집-기술위원회] TC 219 - 바닥재(Floor coverings)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 △1994년 TC 210, TC 211 △1996년 TC 213, TC 214 △1998년 TC 215~218 등이 있다.ISO/TC 219 바닥재(Floor coverings)와 관련된 기술위원회는 1999년 결성됐다. 사무국은 벨기에 표준화기구(Bureau voor Normalisatie/Bureau de Normalisation, NBN)에서 맡고 있다.위원회는 카린 유핑거(Ms Karin Eufinger)가 책임지고 있다. 현재 의장은 제인 가드너(Ms Jane Gardner)이며 임기는 2024년 말까지다. ISO 기술 프로그램 관리자는 안나 카테리나 로시(Dr Anna Caterina Rossi), ISO 편집 관리자는 타즈나 비세빅(Ms Tajna Biscevic) 등이다.범위는 섬유, 탄력성 있는 바닥재 및 합판(라미네이트) 바닥재 분야의 표준화다. 단, 목재, 세라믹, 테라조, 콘크리트, 이중바닥재(악세스 플로어, Raised Access Floor)는 제외한다.현재 ISO/TC 219 사무국의 직접적인 책임 하에 발행된 표준은 83개며 ISO/TC 219 사무국의 직접적인 책임 하에 개발 중인 표준은 10개다. 참여하고 있는 회원은 29개국, 참관 회원은 17개국이다.□ ISO/TC 219 사무국의 직접적인 책임 하에 발행된 표준 83개 중 15개 목록▷ISO 1763:2020 Textile floor coverings — Determination of number of tufts and/or loops per unit length and per unit area▷ISO 1765:1986 Machine-made textile floor coverings — Determination of thickness▷ISO 1766:1999 Textile floor coverings — Determination of thickness of pile above the substrate▷ISO 1957:2000 Machine-made textile floor coverings — Selection and cutting of specimens for physical tests▷ISO 2094:1999 Textile floor coverings — Determination of thickness loss under dynamic loading▷ISO 2424:2007 Textile floor coverings — Vocabulary▷ISO 2549:1972 Textile floor coverings — Hand-knotted carpets — Determination of tuft leg length above the woven ground▷ISO 2549:1972/Cor 1:1990 Textile floor coverings — Hand-knotted carpets — Determination of tuft leg length above the woven ground — Technical Corrigendum 1▷ISO 2550:1972 Textile floor coverings — Hand-made carpets — Determination of types of knots▷ISO 2551:2020 Textile floor coverings and textile floor coverings in tile form — Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane▷ISO 3018:1974 Textile floor coverings — Rectangular textile floor coverings — Determination of dimensions▷ISO 3415:1986 Textile floor coverings — Determination of thickness loss after brief, moderate static loading▷ISO 3416:1986 Textile floor coverings — Determination of thickness loss after prolonged, heavy static loading▷ISO 4760:2022 Laminate flooring — Topical moisture resistance — Assembled joint▷ISO 4918:2016 Resilient, textile and laminate floor coverings — Castor chair test□ ISO/TC 219 사무국의 직접적인 책임 하에 개발 중인 표준 10개 목록▷ISO/FDIS 2424 Textile floor coverings — Vocabulary▷ISO/AWI 4918 Resilient, textile, laminate and modular mechanical locked floor coverings — Castor chair test▷ISO/CD 10833 Textile floor coverings — Determination of resistance to damage at cut edges using the modified Vettermann drum test▷ISO/CD 11378-2 Textile floor coverings — Laboratory soiling tests — Part 2: Drum test▷ISO/DIS 14486 Laminate floor coverings — Specification▷ISO/DIS 20251 Textile floor coverings — Water impermeability test▷ISO/CD 23106 Textile floor coverings — Production of changes in appearance by means of Vettermann drum tester▷ISO/CD 23122 Textile floor coverings — Production of changes in appearance by means of hexapod tumbler tester▷ISO/AWI 23999 Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat▷ISO/FDIS 24342 Resilient and textile floor-coverings — Determination of side length, edge straightness and squareness of tiles and planks
-
[특집-기술위원회] TC 216 - 신발류(Footwear)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 △1994년 TC 210, TC 211 △1996년 TC 213, TC 214 등이 있다.ISO/TC 216 신발류(Footwear)와 관련된 기술위원회는 TC 215와 마찬가지로 1998년 결성됐다. 사무국은 스페인 표준화협회(Spanish Association for Standardization, UNE)에서 맡고 있다.위원회는 헤나르 아라구조 리베라(Ms Henar Araguzo Rivera)가 책임지고 있다. 현재 의장은 카르멘 아리아스 카스텔라노(Ms Carmen ARIAS CASTELLANO)이며 임기는 2024년 말까지다. ISO 기술 프로그램 관리자는 블란딘 가르시아(Mme Blandine Garcia), ISO 편집 관리자는 발레리아 아가넨노네(Ms Valeria Agamennone) 등이다.범위는 신발 구성품에 대한 테스트 방법, 용어, 성능 요구사항의 표준화다. 또한 신발 전체에 대한 데트스 방법, 용어의 표준화도 포함된다.단, 전문가용 신발(이미 ISO/TC 94에 포함됨) 및 부츠와 신발에 대한 크기 지정 시스템 지정 및 표시(ISO/TC 137에서 다룸) 등은 제외한다.현재 ISO/TC 216 사무국의 직접적인 책임 하에 발행된 표준은 81개며 ISO/TC 216 사무국의 직접적인 책임 하에 개발 중인 표준은 15개다. 참여하고 있는 회원은 21개국, 참관 회원은 27개국이다.□ ISO/TC 216 사무국의 직접적인 책임 하에 발행된 표준 81개 중 15개 목록▷ISO 10717:2010 Footwear — Test method for slide fasteners — Burst strength▷ISO 10734:2016 Footwear — Test method for slide fasteners — Strength of slide fastener pullers▷ISO 10748:2011 Footwear — Test method for slide fasteners — Slider locking strength▷ISO 10750:2015 Footwear — Test method for slide fasteners — Attachment strength of end stops▷ISO 10751:2016 Footwear — Test methods for slide fasteners — Resistance to repeated opening and closing▷ISO 10764:2016 Footwear — Test methods for slide fasteners — Lateral strength▷ISO 10765:2010 Footwear — Test method for the characterization of elastic materials — Tensile performance▷ISO 10768:2010 Footwear — Test method for the determination of the resistance of elastic materials for footwear to repeated extension — Fatigue resistance▷ISO 16177:2012 Footwear — Resistance to crack initiation and growth — Belt flex method▷ISO/TR 16178:2021 Footwear — Critical substances potentially present in footwear and footwear components — Lists of critical chemical substances▷ISO/TS 16179:2012 Footwear — Critical substances potentially present in footwear and footwear components — Determination of organotin compounds in footwear materials▷ISO 16181-1:2021 Footwear — Critical substances potentially present in footwear and footwear components — Part 1: Determination of phthalate with solvent extraction▷ISO 16181-2:2021 Footwear — Critical substances potentially present in footwear and footwear components — Part 2: Determination of phthalate without solvent extraction▷ISO 16186:2021 Footwear — Critical substances potentially present in footwear and footwear components — Determination of dimethyl fumarate (DMFU)▷ISO 16187:2013 Footwear and footwear components — Test method to assess antibacterial activity□ ISO/TC 216 사무국의 직접적인 책임 하에 개발 중인 표준 15개 목록▷ISO/DIS 16179 Footwear — Critical substances potentially present in footwear and footwear components — Determination of organotin compounds in footwear materials▷ISO/DIS 16187 Footwear and footwear components — Test method to assess antibacterial activity▷ISO/DIS 19952 Footwear — Vocabulary▷ISO/DTS 20358 Footwear — Performance requirements for components for footwear — Accessories▷ISO/DIS 20537.2 Footwear — Identification of defects during visual inspection — Vocabulary▷ISO/CD 20681 Footwear and footwear components — Test method to assess antimicrobial activity — Agar diffusion test▷ISO/DIS 20686 Footwear — Critical substances potentially present in footwear and footwear components — Determination of certain organic solvents▷ISO/DTS 20939 Footwear — Performance requirements for components for footwear — Outsoles▷ISO/DTS 20952 Footwear — Performance requirements for components for footwear — Uppers▷ISO/DTS 20953 Footwear — Performance requirements for components for footwear — Lining and insocks▷ISO/DTS 20955 Footwear — Performance requirements for components for footwear — Insoles▷ISO/DTS 20961 Footwear — Performance requirements for components for footwear — Shanks▷ISO/DTS 20995 Footwear — Performance requirements for components for footwear — Stiffeners and toe puffs▷ISO/WD 23377 Footwear — Critical substances potentially present in footwear and footwear components — Test method to quantitatively determine certain bisphenols in footwear materials▷ISO/CD TS 23889 Footwear-Performance requirements for components for footwear-Heels and top pieces
-
[특집-기술위원회] TC 215 - 의료 정보학(Health informatics)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 △1994년 TC 210, TC 211 △1996년 TC 213, TC 214 등이 있다.ISO/TC 215 의료 정보학(Health informatics)과 관련된 기술위원회는 1998년 결성됐다. 사무국은 미국 표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 레이첼 호손(Ms Rachel Hawthorne)가 책임지고 있다. 현재 의장은 토드 쿠퍼(Mr Todd Cooper)이며 임기는 2026년 말까지다. ISO 기술 프로그램 관리자는 마호 다카하시(Mme Maho Takahashi), ISO 편집 관리자는 발레리아 아가넨노네(Ms Valeria Agamennone) 등이다.범위는 의료 관련 데이터, 의료 시스템의 모든 측면을 지원하고 활성화하는 지식의 수집, 교환 및 사용을 촉진하기 위한 의료 정보학 분야의 표준화다.현재 ISO/TC 215 사무국과 관련해 발행된 표준은 237개며 ISO/TC 215 사무국의 직접적인 책임 하에 발행된 표준은 225개다.ISO/TC 215과 관련해 개발 중인 표준은 64개며 이중 ISO/TC 215 사무국의 직접적인 책임 하에 개발 중인 표준은 62개다. 참여하고 있는 회원은 35개국, 참관 회원은 32개국이다.□ ISO/TC 215 사무국의 직접적인 책임 하에 발행된 표준 225개 중 15개 목록▷ISO 1828:2012 Health informatics — Categorial structure for terminological systems of surgical procedures▷ISO/TR 4421:2023 Health informatics — Introduction to Ayurveda informatics▷ISO/TS 5044:2023 Health informatics — Information model for quality control of traditional Chinese medicinal products▷ISO/TS 5118:2022 Health informatics — Categorial structure of representation for evaluation of clinical practice guidelines of traditional Chinese medicine▷ISO/TS 5346:2022 Health informatics — Categorial structure for representation of traditional Chinese medicine clinical decision support system▷ISO 5477:2023 Health informatics — Interoperability of public health emergency preparedness and response information systems▷ISO/TS 5499:2024 Health informatics — Clinical particulars — Core principles for the harmonization of therapeutic indications terms and identifiers▷ISO/TS 5568:2022 Health informatics — Traditional Chinese medicine — Labelling metadata of human biological sample information▷ISO/TS 5569:2023 Health informatics — Conceptual data model for Chinese medicinal herbs▷ISO/TR 9143:2023 Health informatics — Sex and gender in electronic health records▷ISO 10159:2011 Health informatics — Messages and communication — Web access reference manifest▷ISO 10781:2023 Health informatics — HL7 Electronic Health Record-System Functional Model, Release 2.1 (EHR FM)▷ISO/IEEE 11073-00103:2015 Health informatics — Personal health device communication — Part 00103: Overview▷ISO/IEEE 11073-10101:2020 Health informatics — Device interoperability — Part 10101: Point-of-care medical device communication — Nomenclature▷ISO/IEEE 11073-10102:2014 Health informatics — Point-of-care medical device communication — Part 10102: Nomenclature — Annotated ECG□ ISO/TC 215 사무국의 직접적인 책임 하에 개발 중인 표준 62개 중 15개 목록▷ISO/AWI TR 4419 Health informatics — Reducing clinicians burden▷ISO/DTS 5384 Health informatics - Categorial Structure and Data Elements for the Identification and Exchange of Immunization Data▷ISO/CD TS 5615 Health informatics — Accelerating Safe, Effective and Secure Remote Connected Care and Mobile Health Through Standards-Based Interoperability Solutions Addressing Gaps Revealed by Pandemics▷ISO/DTS 5777 Health informatics — The architecture of internet healthcare service network▷ISO/DTS 5788 Health informatics — Internet healthcare service pattern▷ISO/CD TS 6201.2 Health Informatics — Personalized Digital Health -Framework▷ISO/CD TS 6204 Health Informatics — Categorial structures for representation of Ayurvedic medicinal water — Decocting process in Ayurveda▷ISO/AWI TS 6226 Health informatics — Reference architecture for syndromic surveillance systems for infectious diseases▷ISO/DTR 6231 Health informatics — Standardizing graphical content▷ISO/CD TS 6268-1 Health informatics — Cybersecurity framework for telehealth environments — Part 1: Overview and Concepts▷ISO/AWI TS 6268-2 Health informatics — Cybersecurity framework for telehealth environments — Part 2: Cybersecurity reference models of telehealth▷ISO/CD TS 7122 Health Informatics — Guidelines for exchanging data generated by POCT (Point of Care Testing) devices between screening center and clinical laboratory▷ISO/AWI TS 9166 Health Informatics — Guidelines for self-assessment questionnaire systems▷ISO/DTS 9320 Health informatics — Standardized data set for transfer of hemodialysis patients▷ISO/DTS 9321 Health informatics — General requirements of multi-centre medical data collaborative analysis□ ISO/TC 215 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 215/SC 1 Genomics Informatics ; 발행된 표준 12개, 개발 중인 표준 2개