검색결과
-
[특집] ISO/TC 83 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회는 1947년 구성된 TC1~TC67, 1948년 구성된 TC 69, 1949년에 구성된 TC 70~72, 1972년 구성된 TC68, 1950년 구성된 TC74, 1951년 구성된 TC76, 1952년 구성된 TC77, 1953년에 구성된 TC79, TC81 등이다.ISO/TC 83 스포츠 및 기타 레크레이션 시설·장비(Sports and other recreational facilities and equipment)와 관련된 기술위원회는 TC82와 마찬가지로 1955년 결성됐다.사무국은 독일표준협회(Deutsches Institut für Normung, DIN)에서 맡고 있다. 위원회는 레티시아 데 안다 곤살레스(Mrs Dipl.-Kffr Leticia de Anda González)이 책임진다. 현재 의장은 마이클 하우스(Mr Michael Haus)로 임기는 2028년까지다.ISO 기술 프로그램 관리자는 샐리 스윙우드(Ms Sally Swingewood), ISO 편집 관리자는 이본 첸(Mrs Yvonne Chen) 등으로 조사됐다.범위는 전통적인 것을 포함한 물리적, e-스포츠를 포함한 가상 스포츠를 위한 관련 테스트 장비를 포함하는 테스트뿐만 아니라 용어, 치수, 허용 오차, 기능, 운영, 유지 관리, 훈련, 성능 및 안전 요구 사항의 표준화다.다음에 대한 표준의 개발 및 유지 관리는 포함된다. △스포츠 및 레크리에이션 시설 △레크리에이션 목적을 위한 장비를 포함한 장비로 로프 코스, 놀이터, 공기주입식 기구, 워터 슬라이드, 캠핑 텐트, 레크리에이션 트레일, 수상 레저 용품, 침낭, 아이스하키, 스노우 스포츠, 스포츠 장비 및 시설 등이 해당된다. 다만 ISO/TC 254 범위 내에서 국제표준이 적용되는 놀이기구 및 놀이 장치는 제외된다.현재 ISO/TC 83 사무국과 관련해 발행된 표준은 97개며 이 중 ISO/TC 83 사무국의 직접적인 책임 하에 개발된 표준은 35개다.ISO/TC 83 사무국과 관련해 개발 중인 표준은 21개며 이중 직접적인 책임 하에 개발 중인 표준은 14개다. 참여하고 있는 회원은 35명, 참관 회원은 18명이다.□ ISO/TC 83 사무국의 직접 책임 하에 발행된 표준 35개 중 15개 목록▲ISO 4980:2023 Benefit-risk assessment for sports and recreational facilities, activities and equipment▲ISO 5912:2020 Camping tents — Requirements and test methods▲ISO 7152:2023 Camping tents and caravan awnings — Vocabulary▲ISO 8936:2017 Awnings for leisure accommodation vehicles — Requirements and test methods▲ISO 11416:1995 Tennis rackets — Racket components and physical parameters▲ISO 19202-1:2017 Summer toboggan runs — Part 1: Safety requirements and test methods▲ISO 19202-2:2017 Summer toboggan runs — Part 2: Safety requirements for operation▲ISO/TR 20183:2015 Sports and other recreational facilities and equipment — Injury and safety definitions and thresholds — Guidelines for their inclusion in standards▲ISO 20187-1:2022 Inflatable play equipment — Part 1: Safety requirements and test methods▲ISO 20187-2:2022 Inflatable play equipment — Part 2: Additional safety requirements for inflatable bouncing pillows intended for permanent installation▲ISO 20187-3:2022 Inflatable play equipment — Part 3: Additional safety requirements and test methods for snappies▲ISO 20380:2017 Public swimming pools — Computer vision systems for the detection of drowning accidents in swimming pools — Safety requirements and test methods▲ISO 20957-1:2013 Stationary training equipment — Part 1: General safety requirements and test methods▲ISO 20957-2:2020 Stationary training equipment — Part 2: Strength training equipment, additional specific safety requirements and test methods▲ISO 20957-4:2016 Stationary training equipment — Part 4: Strength training benches, additional specific safety requirements and test methods□ ISO/TC 83 사무국의 직접 책임 하에 개발중인 표준 14개 목록▲ISO/AWI 20288 Public Swimming Pools — Systems recognizing involuntarily submersion of humans in managed aquatic facilities▲ISO/CD 20957-1 Stationary training equipment — Part 1: General safety requirements and test methods▲ISO/DIS 20957-2 Stationary training equipment — Part 2: Strength training equipment — Additional specific safety requirements and test methods▲ISO/DIS 20957-7 Stationary training equipment — Part 7: Rowing equipment — Additional specific safety requirements and test methods▲ISO 23537-2 Requirements for sleeping bags — Part 2: Fabric and material properties▲ISO/DTS 24665 Playground and recreational areas — Framework for the competence of playground inspectors and playground maintenance technicians▲ISO/TR 24666 Sports and recreational facilities — Probes for entrapment/entanglement on playground equipment — Collection of data▲ISO/DIS 25649-1 Floating leisure articles for use on and in the water — Part 1: Classification, materials, general requirements and test methods▲ISO/DIS 25649-2 Floating leisure articles for use on and in the water — Part 2: Consumer information▲ISO/DIS 25649-3 Floating leisure articles for use on and in the water — Part 3: Additional specific safety requirements and test methods for Class A devices▲ISO/DIS 25649-4 Floating leisure articles for use on and in the water — Part 4: Additional specific safety requirements and test methods for Class B devices▲ISO/DIS 25649-5 Floating leisure articles for use on and in the water — Part 5: Additional specific safety requirements and test methods for Class C devices▲ISO/DIS 25649-6 Floating leisure articles for use on and in the water — Part 6: Additional specific safety requirements and test methods for Class D devices▲ISO/DIS 25649-7 Floating leisure articles for use on and in the water — Part 7: Additional specific safety requirements and test methods for Class E devices□ ISO/TC 83 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 83/SC 4 Snowsports equipment ; 발행된 표준 47개, 개발 중인 표준 2개▲ISO/TC 83/SC 5 Ice hockey equipment and facilities ; 발행된 표준 5개, 개발 중인 표준 5개▲ISO/TC 83/SC 6 Martial arts ; 발행된 표준 10개, 개발 중인 표준 0개
-
[특집] ISO/TC 82 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회는 1947년 구성된 TC1~TC67, 1948년 구성된 TC 69, 1949년에 구성된 TC 70~72, 1972년 구성된 TC68, 1950년 구성된 TC74, 1951년 구성된 TC76, 1952년 구성된 TC77, 1953년에 구성된 TC79, TC81 등이다.ISO/TC 82 광업(Mining)과 관련된 기술위원회는1955년 결성됐다. 사무국은 독일표준협회(Deutsches Institut für Normung, DIN)에서 맡고 있다. 위원회는 요른 레만(Mr Jörn Lehmann)이 책임진다. 현재 의장은게오르그 Chr. 필러((FH) Georg Chr. Piller)로 임기는 2027년까지다.ISO 기술 프로그램 관리자는 메르세 페레스 에르난데스(Mme Mercè Ferrés Hernández), ISO 편집 관리자는 빈센조 바추키(M Vincenzo Bazzucchi) 등으로 조사됐다.범위는 컨베어, 고벽 채굴기, 암석 채굴장비, 연속 표층 채굴기 등 노천광산에서 사용되는 특수 채굴 기계 및 장비와 관련한 표준화다.또한 도로 헤더, 연속 채굴기, 암석 채굴장비, 굴착기, 고벽 체굴기, LHD, 광업 오거 보링기계, RMDS(급속 광산 개발 시스템) 등 고체 광물질의 추출을 위한 모든 지하 채굴 기계 및 장비의 표준화도 추진하고 있다.광산 측량에 사용되는 계획 및 도면을 제시할 때 권장되는 관행, 광물 매장량 계산 방법, 광산 매립 관리, 광산 산업을 위한 구조물 설계, 특수 피난처 및 구조실, 샤프트 보링 머신 등도 표준화 대상이다. 단 다음 항목은 표준화 범위에서 제외된다.△파일링, 다이어프램 월링, 어스 보링, 제트, 그라우팅, 토양 및 암석 혼합물용 드릴 장비 등의 기초 기계(ISO/TC 195)△스크리닝, 파쇄 등 골재 처리 기계△폭발성 대기에서 사용되는 장비 및 보호 시스템(IEC/TC 31)△휴대용 착암기(ISO/TC 118)△토목 기계(ISO/TC 127)△지질 공학(ISO/TC 182)△터널 굴착기(TBM) 및 관련 기계 및 장비(ISO/TC 195) 등이다.현재 ISO/TC 82 사무국과 관련해 발행된 표준은 61개며 이 중 ISO/TC 82 사무국의 직접적인 책임 하에 개발된 표준은 58개다.ISO/TC 82 사무국과 관련해 개발중인 표준은 13개며 이중 직접적인 책임 하에 개발 중인 표준은 8개다. 참여하고 있는 회원은 25명, 참관 회원은 24명이다.□ ISO/TC 82 사무국의 직접 책임 하에 발행된 표준 58개 중 15개 목록▲ISO 610:1990 High-tensile steel chains (round link) for chain conveyors and coal ploughs▲ISO 710-1:1974 Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 1: General rules of representation▲ISO 710-2:1974 Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 2: Representation of sedimentary rocks▲ISO 710-3:1974 Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 3: Representation of magmatic rocks▲ISO 710-4:1982 Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 4: Representation of metamorphic rocks▲ISO 710-5:1989 Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 5: Representation of minerals▲ISO 710-6:1984 Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 6: Representation of contact rocks and rocks which have undergone metasomatic, pneumatolytic or hydrothermal transformation or transformation by weathering▲ISO 710-7:1984 Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 7: Tectonic symbols▲ISO 721:1991 Rock drilling equipment — Integral stems▲ISO 722:1991 Rock drilling equipment — Hollow drill steels in bar form, hexagonal and round▲ISO 723:1991 Rock drilling equipment — Forged collared shanks and corresponding chuck bushings for hollow hexagonal drill steels▲ISO 1082:1990 Mining — Shackle type connector units for chain conveyors▲ISO 1717:1974 Rock drilling — Rotary drill-rods and rotary drill-bits for dry drilling — Connecting dimensions▲ISO 1718:1991 Rock drilling equipment — Drill rods with tapered connection for percussive drilling▲ISO 1721:1974 Rock drilling — Extension drill-steel equipment for percussive long-hole drilling — Reverse-buttress-threaded equipments 1 1/16 and 1 1/4 in (27 and 32 mm)□ ISO/TC 82 사무국의 직접 책임 하에 개발중인 표준 8개 목록▲ISO/AWI 12848 Mine hoists and mine winders-Safety requirements▲ISO/AWI 18758 Mining, earth-moving and construction machinery — Rock drill rigs and rock reinforcement rigs — Safety requirements▲ISO/AWI TS 20268 Inspection and Maintenance of Mine Shaft and Associated Structures▲ISO/CD 22932-6 Mining — Vocabulary — Part 6: Mine hosting equipment▲ISO/CD 22932-7 Mining — Vocabulary — Part 7: Ventilation▲ISO/CD 22932-8 Mining — Vocabulary — Part 8: Extraction▲ISO/CD 22932-9 Mining — Vocabulary — Part 9: Drainage▲ISO/AWI 22932-10 Mining — Vocabulary — Part 10: Haulage□ ISO/TC 82 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 82/SC 7 Mine closure and reclamation management ; 발행된 표준 3개, 개발 중인 표준 3개▲ISO/TC 82/SC 8 Advanced automated mining systems ; 발행된 표준 0개, 개발 중인 표준 2개
-
[특집] ISO/TC 79 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 79 경금속 및 합금(Light metals and their alloys)과 관련된 기술위원회는 1953년에 결성됐다.이미 다룬 기술위원회는 1947년 구성된 TC1~TC67, 1948년 구성된 TC 69, 1949년에 구성된 TC 70~72, 1972년 구성된 TC68, 1950년 구성된 TC74, 1951년 구성된 TC76, 1952년에 구성된 TC77 등이다.사무국은 프랑스준화기구(Association française de normalisation, AFNOR)에서 맡고 있다. 위원회는 발렌틴 코틴(M Valentin Cottin)가 책임진다. 현재 의장은 이본 밀레(M Yvon Millet)로 임기는 2026년까지다.ISO 기술 프로그램 관리자는 안나 (Ms Monja Korter), ISO 편집 관리자는 앤 기엣(Ms Anne Guiet) 등으로 조사됐다. 범위는 알루미늄, 마그네슘, 티타늄, 이들의 합금(알루미늄, 마그네슘 또는 티타늄이 주요 요소인 합금 등)의 표준화다.또한 금속 알루미늄 및 중간 알루미늄 화합물을 얻기 위해 또는 다른 산업에서 사용되는 알루미늄 광석 및 광물 등 알루미늄 광석의 표준화도 포함된다.현재 ISO/TC 79 사무국의 직접적인 책임 하에 발행된 표준은 33개다. ISO/TC 79 사무국의 공개된 표준은 111개, 개발중인 표준은 10개다. 참여하고 있는 회원은 19명, 참관 회원은 24명이다.□ ISO/TC 79 사무국의 직접 책임 하에 발행된 표준 15개 목록▲ISO 791:1973 Magnesium alloys — Determination of aluminium — 8-hydroxyquinoline gravimetric method▲ISO 792:1973 Magnesium and magnesium alloys — Determination of iron — Orthophenanthroline photometric method▲ISO 793:1973 Aluminium and aluminium alloys — Determination of iron — Orthophenanthroline photometric method▲ISO 794:1976 Magnesium and magnesium alloys — Determination of copper content — Oxalyldihydrazide photometric method▲ISO 795:1976 Aluminium and aluminium alloys — Determination of copper content — Oxalyldihydrazide photometric method▲ISO 796:1973 Aluminium alloys — Determination of copper — Electrolytic method▲ISO 797:1973 Aluminium and aluminium alloys — Determination of silicon — Gravimetric method▲ISO 808:1973 Aluminium and aluminium alloys — Determination of silicon — Spectrophotometric method with the reduced silicomolybdic complex▲ISO 809:1973 Magnesium and magnesium alloys — Determination of manganese — Periodate photometric method (Manganese content between 0,01 and 0,8 %)▲ISO 810:1973 Magnesium and magnesium alloys — Determination of manganese — Periodate photometric method (Manganese content less than 0,01 %)▲ISO 886:1973 Aluminium and aluminium alloys — Determination of manganese — Photometric method (Manganese content between 0,005 and 1,5 %)▲ISO 1118:1978 Aluminium and aluminium alloys — Determination of titanium — Spectrophotometric chromotropic acid method▲ISO 1178:1976 Magnesium alloys — Determination of soluble zirconium — Alizarin sulphonate photometric method▲ISO 1783:1973 Magnesium alloys — Determination of zinc — Volumetric method▲ISO 1784:1976 Aluminium alloys — Determination of zinc — EDTA titrimetric method□ ISO/TC 79 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 79/SC 2 Organic and anodic oxidation coatings on aluminium ; 발행된 표준 27개, 개발 중인 표준 0개▲ISO/TC 79/SC 4 Unalloyed (refined) aluminium ingots ; 발행된 표준 1개, 개발 중인 표준 1개▲ISO/TC 79/SC 5 Magnesium and alloys of cast or wrought magnesium ; 발행된 표준 11개, 개발 중인 표준 4개▲ISO/TC 79/SC 6 Wrought aluminium and aluminium alloys ; 발행된 표준 20개, 개발 중인 표준 1개▲ISO/TC 79/SC 7 Aluminium and cast aluminium alloys ; 발행된 표준 4개, 개발 중인 표준 0개▲ISO/TC 79/SC 9 Symbolization ; 발행된 표준 1개, 개발 중인 표준 1개▲ISO/TC 79/SC 11 Titanium ; 발행된 표준 13개, 개발 중인 표준 3개▲ISO/TC 79/SC 12 Aluminium ores ; 발행된 표준 1개, 개발 중인 표준 0개
-
[중국] 노보센스(Novosense), 표준 드래프팅 그룹 회의(Standard Drafting Group Meeting, SDGM) 개최중국 종합 반도체 및 솔루션 제공기업 노보센스(Novosense)에 따르면 표준 드래프팅 그룹 회의(Standard Drafting Group Meeting, SDGM)가 5월 말 개최됐다. 회의 주제는 자동 로컬 상호 연결 네트워크(Auto Local Interconnect Network, LIN) 트랜시버 칩(Transceiver Chips)에 대한 기술 요구사항 및 테스트 방법에 관한 것이다.또한 중국 자동차 전자 및 전자파 적합성 소위원회(SAC/TC114/SC29)는 2023년 자동차 칩 표준 연구(Automotive Chip Standard Research) 워킹 그룹(Working Group)의 첫 회의를 개최했다.적합성 소위원회 SAC/TC114/SC29는 국가 자동 표준화 기술위원회(National Technical Committee of Auto Standardization, NTCAS) 산하 소위원회다.이날 노보센스(Novosense)가 공식적으로 주도한 SDGM회의는 노보센스 대표단과 10개 이상의 자동차 주문자상표제조(OEM)사, 1차 공급업체, 산업계 조직 등 업계 전문가가 참여했다.산업계 조직은 제어 모드 및 기능, 전기적 특성, 전자적양립성(EMC) 요구사항 및 환경 신뢰성, LIN 통신 프로토콜 및 LIN 트랜시버 칩의 일관성 테스트와 관련된 업체들로 구성됐다.자동차의 전동화 및 지능화의 발전과 함께 자동차 칩의 사용이 크게 증가했다. LIN 트랜시버 칩의 경우 일반적으로 차량에 약 15~20개의 LIN 트랜시버 칩이 있다. 더 많은 컨트롤러를 사용하는 차량은 30개 정도의 LIN 칩이 장착돼 있다.일반적인 차량 탑재 네트워크 중 하나인 LIN은 가능한 가장 낮은 비용으로 제어 장치에서 저속 데이터를 전송하는 기능을 수행한다.LIN 버스는 가능한 한 많은 배선을 제거할 수 있으며 각 노드에서 단일 배선을 사용해 구현된다. LIN은 일반적으로 백미러, 윈도우 리프터, 도어 스위치, 도어록, 자동차 시트, 엔진 센서, 엔진 냉각 팬, 와이퍼 컨트롤, 레인 센서, 조명 컨트롤, 선루프 등에 사용된다.중국자동차공업협회 자료에 따르면 2022년 중국 자동차 생산량은 2702만1000대, 판매량은 2686만4000대를 각각 기록했다. 따라서 LIN 트랜시버 칩은 수요가 크게 증가하고 있으며 국가표준시스템 구축이 필수적인 상황이다
-
[특집] ISO/TC 72 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 72 섬유기계 및 부속품(Textile machinery and accessories)과 관련된 기술위원회는 1947년 구성된 TC1~TC67, 1948년 구성된 TC 69, 1972년 구성된 TC68과 달리 TC 70, 71과 마찬가지로 1949년 만들어졌다.사무국은 스위스표준화협회(Swiss Association for Standardization, SNV)에서 맡고 있다. 위원회는 루스 슈나이(Ms Ruth Schneider)가 책임진다. 의장은 조아킴 비(Dr Joachim Binnig)으로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 다마호 다카이(Ms Tamaho Takai), ISO 편집 관리자는 앤 기엣(Ms Anne Guiet) 등으로 조사됐다.범위는 섬유 기계, 섬유 기계의 부품, 섬유 기계의 부속품과 드라이크리닝 및 산업용 세탁 기계, 그 부품 및 부속품 등의 표준화다.현재 ISO/TC 72 사무국의 직접적인 책임하에 발행된 표준은 15개며 ISO/TC 72 사무국과 관련해 발행된 표준은 170개다. 참여하고 있는 회원은 15명, 참관 회원은 19명이다.□ ISO/TC 72 사무국의 직접적인 책임하에 발행된 표준 15개 목록▲ISO 8229:1991 Operations and baths relating to dry-cleaning machines — Vocabulary▲ISO 8230-1:2008 Safety requirements for dry-cleaning machines — Part 1: Common safety requirements▲ISO 8230-2:2008 Safety requirements for dry-cleaning machines — Part 2: Machines using perchloroethylene▲ISO 8230-3:2008 Safety requirements for dry-cleaning machines — Part 3: Machines using combustible solvents▲ISO 8232:1988 Closed-circuit dry-cleaning machines — Defining and checking of machine characteristics▲ISO 9398-1:2003 Specifications for industrial laundry machines — Definitions and testing of capacity and consumption characteristics — Part 1: Flatwork ironing machines▲ISO 9398-2:2003 Specifications for industrial laundry machines — Definitions and testing of capacity and consumption characteristics — Part 2: Batch drying tumblers▲ISO 9398-3:2003 Specifications for industrial laundry machines — Definitions and testing of capacity and consumption characteristics — Part 3: Washing tunnels▲ISO 9398-4:2003 Specifications for industrial laundry machines — Definitions and testing of capacity and consumption characteristics — Part 4: Washer-extractors▲ISO 10472-1:1997 Safety requirements for industrial laundry machinery — Part 1: Common requirements▲ISO 10472-2:1997 Safety requirements for industrial laundry machinery — Part 2: Washing machines and washer-extractors▲ISO 10472-3:1997 Safety requirements for industrial laundry machinery — Part 3: Washing tunnel lines including component machines▲ISO 10472-4:1997 Safety requirements for industrial laundry machinery — Part 4: Air dryers▲ISO 10472-5:1997 Safety requirements for industrial laundry machinery — Part 5: Flatwork ironers, feeders and folders▲ISO 10472-6:1997 Safety requirements for industrial laundry machinery — Part 6: Ironing and fusing presses□ ISO/TC 72 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 72/SC 1 Spinning preparatory, spinning, twisting and winding machinery and accessories ; 발행된 표준 48개, 개발 중인 표준 0개▲ISO/TC 72/SC 3 Machinery for fabric manufacturing including preparatory machinery and accessories ; 발행된 표준 60개, 개발 중인 표준 0개▲ISO/TC 72/SC 4 Dyeing and finishing machinery and accessories ; 발행된 표준 6개, 개발 중인 표준 0개▲ISO/TC 72/SC 8 Safety requirements for textile machinery ; 발행된 표준 40개, 개발 중인 표준 0개▲ISO/TC 72/SC 10 Common standards ; 발행된 표준 1개, 개발 중인 표준 0개
-
[특집] ISO/TC 71 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 71 콘크리트, 강화 콘크리트, 프리스트레스 콘크리트(Concrete, reinforced concrete and pre-stressed concrete)과 관련된 기술위원회는 1947년 구성된 TC1~TC67, 1948년 구성된 TC 69, 1972년 구성된 TC68과 달리 TC 70과 마찬가지로 1949년 만들어졌다.사무국은 일본 산업표준조사회(日本産業標準調査会, Japanese Industrial Standards Committee, JISC)에서 맡고 있다. 위원회는 히로시 요코타(Dr Hiroshi Yokota)가 책임진다. 의장은 다문 우에다( Dr Tamon Ueda)으로 임기는 2026년까지다.ISO 기술 프로그램 관리자는 앤 캐서린 로시(Dr Anna Caterina Rossi), ISO 편집 관리자는 앤 기엣(Ms Anne Guiet) 등으로 조사됐다.범위는 품질 및 가격 절감 측면에서 점진지거 개발을 보장하기 위해 콘크리트 기술, 콘크리트 및 강회 콘크리트, 프리스트레스 콘크리트 구조물의 설계와 구조에 대한 표준화다. 연구 작업의 국제적 교류를 촉진하기 위한 테스트 절차뿐 아니라 정의와 용어의 표준화도 포함된다.현재 ISO/TC 71 사무국의 직접적인 책임하에 발행된 표준은 1개며 ISO/TC 71 사무국과 관련해 발행된 표준은 73개다.ISO/TC 71 사무국의 직접적인 책임하에 개발 중인 표준은 2개 ISO/TC 71 사무국과 관련해 개발 중인 표준은 31개다. 참여하고 있는 회원은 31명, 참관 회원은 63명이다.□ ISO/TC 71 사무국의 직접적인 책임하에 발행된 표준 1개 목록▲ISO 22040:2021 Life cycle management of concrete structures□ ISO/TC 71 사무국의 직접적인 책임하에 개발 중인 표준 2개 목록▲ISO/WD 16521 Design standard for concrete-filled steel tubular (CFST) hybrid structures▲ISO/CD 22040-2 Life cycle management of concrete structures — Part 2: Structural planning and design□ ISO/TC 71 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 71/SC 1 Test methods for concrete ; 발행된 표준 23개, 개발 중인 표준 1개▲ISO/TC 71/SC 3 Concrete production and execution of concrete structures ; 발행된 표준 11개, 개발 중인 표준 4개▲ISO/TC 71/SC 4 Performance requirements for structural concrete ; 발행된 표준 1개, 개발 중인 표준 1개▲ISO/TC 71/SC 5 Simplified design standard for concrete structures ; 발행된 표준 9개, 개발 중인 표준 0개▲ISO/TC 71/SC 6 Non-traditional reinforcing materials for concrete structures ; 발행된 표준 11개, 개발 중인 표준 6개▲ISO/TC 71/SC 7 Maintenance and repair of concrete structures ; 발행된 표준 12개, 개발 중인 표준 13개▲ISO/TC 71/SC 8 Environmental management for concrete and concrete structures ; 발행된 표준 5개, 개발 중인 표준 4개
-
[특집] ISO/TC 70 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 70 내연기관(Internal combustion engines)과 관련된 기술위원회는 1947년 구성된 TC1~TC67, 1948년 구성된 TC 69, 1972년 구성된 TC68과 달리 1949년 만들어졌다.사무국은 중국 국가표준화관리위원회(国家标准化管理委员会, SAC)에서 맡고 있다. 위원회는 웨이빈 지(Mr Weibin Ji)이 책임진다. 의장은 슈링 우(Mr Xuling Wu)으로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 이사벨 베가(Ms Isabelle Vega), ISO 편집 관리자는 아룬 ABY 파라에카틸(Mr Arun ABY Paraecattil) 등으로 조사됐다.범위는 엔진과 구동 기계 및 환경 간 관계를 고려한 정의, 성능/테스트 및 특수 요구 사항을 포함해 왕복 및 회전 변위 내연 기관 분야의 표준화다.■ 단, 도로 차량 및 항공기를 추진하는 데 사용되는 왕복 및 회전 변위 엔진은 제외한다.현재 ISO/TC 70 사무국의 직접적인 책임하에 발행된 표준은 49개며 ISO/TC 70 사무국과 관련해 발행된 표준은 74개다.ISO/TC 70 사무국의 직접적인 책임하에 개발 중인 표준은 4개 ISO/TC 70 사무국과 관련해 개발 중인 표준은 7개다. 참여하고 있는 회원은 15명, 참관 회원은 23명이다.□ ISO/TC 70 사무국의 직접적인 책임하에 발행된 표준 15개 목록▲ISO 1204:1990 Reciprocating internal combustion engines — Designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine▲ISO 2261:1994 Reciprocating internal combustion engines — Hand-operated control devices — Standard direction of motion▲ISO 2710-1:2017 Reciprocating internal combustion engines — Vocabulary — Part 1: Terms for engine design and operation▲ISO 2710-2:2019 Reciprocating internal combustion engines — Vocabulary — Part 2: Terms for engine maintenance▲ISO 3046-1:2002 Reciprocating internal combustion engines — Performance — Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods — Additional requirements for engines for general use▲ISO 3046-3:2006 Reciprocating internal combustion engines — Performance — Part 3: Test measurements▲ISO 3046-4:2009 Reciprocating internal combustion engines — Performance — Part 4: Speed governing▲ISO 3046-5:2001 Reciprocating internal combustion engines — Performance — Part 5: Torsional vibrations▲ISO 3046-6:2020 Reciprocating internal combustion engines — Performance — Part 6: Overspeed protection▲ISO 6798-1:2020 Reciprocating internal combustion engines — Measurement of sound power level using sound pressure — Part 1: Engineering method▲ISO 6798-2:2020 Reciprocating internal combustion engines — Measurement of sound power level using sound pressure — Part 2: Survey method▲ISO 6798-3:2022 Reciprocating internal combustion engines — Measurement of sound power level using sound pressure — Part 3: Survey method for use in situ▲ISO 6826:2022 Reciprocating internal combustion engines — Fire protection▲ISO 7967-1:2005 Reciprocating internal combustion engines — Vocabulary of components and systems — Part 1: Structure and external covers▲ISO 7967-2:2010 Reciprocating internal combustion engines — Vocabulary of components and systems — Part 2: Main running gear□ ISO/TC 70 사무국의 직접적인 책임하게 개발 중인 표준 4개 목록▲ISO/WD 8528-5 Reciprocating internal combustion engine driven alternating current generating sets — Part 5: Generating sets▲ISO/FDIS 8528-6 Reciprocating internal combustion engine driven alternating current generating sets — Part 6: Test methods▲ISO/WD 8528-13 Reciprocating internal combustion engine driven alternating current generating sets — Part 13: Safety▲ISO/WD TS 19425 Reciprocating internal combustion engines — Measurement method for air cleaners — Sound power level of combustion air inlet noise and insertion loss using sound pressure□ ISO/TC 70 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 70/SC 7 Tests for lubricating oil filters ; 발행된 표준 14개, 개발 중인 표준 3개▲ISO/TC 70/SC 8 Acceptance sampling ; 발행된 표준 11개, 개발 중인 표준 0개▲ISO/TC 68/SC 6 Measurement methods and results ; 발행된 표준 36개, 개발 중인 표준 5개▲ISO/TC 68/SC 7 Applications of statistical and related techniques for the implementation of Six Sigma ; 발행된 표준 13개, 개발 중인 표준 0개▲ISO/TC 68/SC 8 Exhaust gas emission measurement ; 발행된 표준 10개, 개발 중인 표준 0개
-
[특집] ISO/TC 69 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 69 통계적 방법의 적용(Applications of statistical methods)과 관련된 기술위원회는 1947년 구성된 TC1~TC67, 1972년 구성된 TC68과 달리 1948년 만들어졌다.사무국은 미국 표준협회(American National Standard Institute, ANSI)에서 맡고 있다. 위원회는 제니퍼 애드무센(Ms Jennifer Admussen)이 책임진다. 의장은 켈리 블랙(Ms Kelly Black)으로 임기는 2027년까지다.ISO 기술 프로그램 관리자는 메르체 페레스 헤르난데스(Mme Mercè Ferrés Hernández), ISO 편집 관리자는 빈센조 바추키(M Vincenzo Bazzucchi) 등으로 조사됐다. 범위는 데이터의 생성 및 수집(계획 및 디자인), 분석, 표시, 해석을 포함한 통계적 방법의 적용 분야 표준화다.■ 주의이사회 결의안 12/1959 및 이사회 결의안 26/1961에 의해 ISO 이사회는 표준화에 통계적 방법을 적용하는 것과 관련된 문제에 모든 ISO 기술 위원회를 위한 자문 역할을 ISO/TC 69에 맡겼다.현재 ISO/TC 69 사무국의 직접적인 책임하에 발행된 표준은 18개며 ISO/TC 69 사무국과 관련해 발행된 표준은 125개다. ISO/TC 69 사무국의 직접적인 책임하에 개발 중인 표준은 1개 ISO/TC 69 사무국과 관련해 개발 중인 표준은 13개다. 참여하고 있는 회원은 20명, 참관 회원은 36명이다.□ ISO/TC 69 사무국의 직접적인 책임하에 발행된 표준 18개 목록▲ISO 2602:1980 Statistical interpretation of test results — Estimation of the mean — Confidence interval▲ISO 2854:1976 Statistical interpretation of data — Techniques of estimation and tests relating to means and variances▲ISO 3301:1975 Statistical interpretation of data — Comparison of two means in the case of paired observations▲ISO 3494:1976 Statistical interpretation of data — Power of tests relating to means and variances▲ISO 3534-1:2006 Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability▲ISO 3534-2:2006 Statistics — Vocabulary and symbols — Part 2: Applied statistics▲ISO 3534-3:2013 Statistics — Vocabulary and symbols — Part 3: Design of experiments▲ISO 3534-4:2014 Statistics — Vocabulary and symbols — Part 4: Survey sampling▲ISO 5479:1997 Statistical interpretation of data — Tests for departure from the normal distribution▲ISO 11453:1996 Statistical interpretation of data — Tests and confidence intervals relating to proportions▲ISO 11453:1996/Cor 1:1999 Statistical interpretation of data — Tests and confidence intervals relating to proportions — Technical Corrigendum 1▲ISO/TR 13519:2012 Guidance on the development and use of ISO statistical publications supported by software▲ISO 16269-4:2010 Statistical interpretation of data — Part 4: Detection and treatment of outliers▲ISO 16269-6:2014 Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals▲ISO 16269-7:2001 Statistical interpretation of data — Part 7: Median — Estimation and confidence intervals▲ISO 16269-8:2004 Statistical interpretation of data — Part 8: Determination of prediction intervals▲ISO/TR 18532:2009 Guidance on the application of statistical methods to quality and to industrial standardization▲ISO 28640:2010 Random variate generation methods□ ISO/TC 69 사무국의 직접적인 책임하게 개발 중인 표준 1개 목록▲ISO/AWI TR 23348 Statistics — Big Data Analytics — Model Validation□ ISO/TC 69 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 68/SC 4 Applications of statistical methods in product and process management ; 발행된 표준 21개, 개발 중인 표준 5개▲ISO/TC 68/SC 5 Acceptance sampling ; 발행된 표준 27개, 개발 중인 표준 2개▲ISO/TC 68/SC 6 Measurement methods and results ; 발행된 표준 36개, 개발 중인 표준 5개▲ISO/TC 68/SC 7 Applications of statistical and related techniques for the implementation of Six Sigma ; 발행된 표준 13개, 개발 중인 표준 0개▲ISO/TC 68/SC 8 Application of statistical and related methodology for new technology and product development ; 발행된 표준 10개, 개발 중인 표준 0개
-
[특집] ISO/TC 68 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 68 금융서비스(Financial services)와 관련된 기술위원회는 1947년 구성된 TC1~TC67과 달리 1972년 만들어졌다.사무국은 미국 표준협회(American National Standard Institute, ANSI)에서 맡고 있다. 위원회는 자넷 시(Ms Janet Busch)가 책임진다. 의장은 짐 노세이(Mr Jim Northey)으로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 샐리 스윙우드(Ms Sally Swingewood), ISO 편집 관리자는 데이비드 리드(Mr David Reid) 등으로 조사됐다. 범위는 은행, 보안, 기타 금융서비스 분야의 표준화다.TC 68(ISO/TC 68)은 금융 서비스 산업의 글로벌 표준을 만드는 일을 담당하고 있다. 또한 자산 관리, 지불, 신용 카드 처리 및 금융 서비스에 특정한 정보 보안 측면을 포함한 코어 뱅킹(core banking), 자본 시장을 다루는 표준을 책임지고 있다. 위원회는 SC2(정보 보안), SC8(참조 데이터) 및 SC9(정보 교환)의 3개 분과로 구성된다. 소위원회, 자문 그룹 및 작업 그룹을 통한 TC 68의 초점은 다음과 같다.▶진화하는 비즈니스 요구 사항, 혁신 및 규제 요구 사항을 지원하기 위한 새로운 표준 개발 식별▶기존 국제 표준의 채택 촉진▶ISO, 기타 표준 및 독점 접근 방식의 공존 관리▶업계 이해관계자의 참여 확인 및 확보 현재 ISO/TC 68 사무국과 관련돼 발행된 표준은 75개며 ISO/TC 68 사무국과 관련해 개발중인 표준은 22개다. 참여하고 있는 회원은 36명, 참관 회원은 49명이다.□ ISO/TC 68 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 68/SC 2 Financial Services, security ; 발행된 표준 17개, 개발 중인 표준 8개▲ISO/TC 68/SC 8 Reference data for financial services ; 발행된 표준 21개, 개발 중인 표준 5개▲ISO/TC 68/SC 9 Information exchange for financial services ; 발행된 표준 37개, 개발 중인 표준 9개
-
[특집] ISO/TC 67 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 67 저탄소에너지를 포함한 석유 및 가스 산업(Oil and gas industries including lower carbon energy)와 관련된 기술위원회는 TC1, TC2, TC4~TC6, TC8, TC10~TC12, TC14, TC17~TC22, TC24~31, TC33~TC39, TC41~TC48, TC51, TC52, TC54, TC58~TC61, TC63과 동일하게 1947년 구성됐다.사무국은 네덜란드표준화기구(Royal Netherlands Standardization Institute, NEN)에서 맡고 있다. 위원회는 프랑수아즈 반 덴 브링크(Mrs Françoise van den Brink)가 책임진다. 의장은 필립 스메들리(Mr Philip Smedley)으로 임기는 2025년까지다.ISO 기술 프로그램 관리자는 키르시 실란더-반 후넨(Mrs Kirsi Silander-van Hunen), ISO 편집 관리자는 크리스틴 간손레(Ms Christelle Gansonre) 등으로 조사됐다. 범위는 석유화학 및 저탄소 에너지 활동을 포함한 석유 및 가스 산업 분야의 표준화다.□ 제외 사항▲ISO/TC 28에서 다루는 천연 또는 합성 소스의 석유 및 관련 제품, 연료 및 윤활유와 관련된 측면▲ISO/TC 193에서 다루는 천연 가스 관련 측면▲ISO/TC 197에서 다루는 수소 기술과 관련된 측면▲ISO/TC 255에서 다루는 바이오가스 관련 측면▲ISO/TC 265에서 다루는 이산화탄소 포집, 운송 및 지질학적 저장과 관련된 측면▲IMO 요구 사항(ISO/TC 8)이 적용되는 해양 구조물의 측면현재 ISO/TC 67 사무국의 직접적인 책임하에 발행된 표준은 32개며 ISO/TC 67 사무국과 관련해 발행된 표준은 231개다.ISO/TC 67 사무국의 직접적인 책임하에 개발되고 있는 표준은 4개며 ISO/TC 67 사무국과 관련해 개발되고 있는 표준은 44개다. 참여하고 있는 회원은 34명, 참관 회원은 28명이다.□ ISO/TC 67 사무국의 직접적인 책임하에 발행된 표준 32개 중 15개 목록▲ISO/TS 3250:2021 Petroleum, petrochemical and natural gas industries — Calculation and reporting production efficiency in the operating phase▲ISO/TR 12489:2013 Petroleum, petrochemical and natural gas industries — Reliability modelling and calculation of safety systems▲ISO 13085:2014 Petroleum and natural gas industries — Aluminium alloy pipe for use as tubing for wells▲ISO 13879:1999 Petroleum and natural gas industries — Content and drafting of a functional specification▲ISO 13880:1999 Petroleum and natural gas industries — Content and drafting of a technical specification▲ISO/TR 13881:2000 Petroleum and natural gas industries — Classification and conformity assessment of products, processes and services▲ISO 14224:2016 Petroleum, petrochemical and natural gas industries — Collection and exchange of reliability and maintenance data for equipment▲ISO 15156-1:2020 Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 1: General principles for selection of cracking-resistant materials▲ISO 15156-2:2020 Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons▲ISO 15156-3:2020 Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys▲ISO 15546:2011 Petroleum and natural gas industries — Aluminium alloy drill pipe▲ISO 15663:2021 Petroleum, petrochemical and natural gas industries — Life cycle costing▲ISO 16961:2015 Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks▲ISO 17348:2016 Petroleum and natural gas industries — Materials selection for high content CO2 for casing, tubing and downhole equipment▲ISO 17349:2016 Petroleum and natural gas industries — Offshore platforms handling streams with high content of CO2 at high pressures□ ISO/TC 67 사무국의 직접적인 책임하에 개발중인 표준 4개 목록▲ISO/DIS 3845 Oil and gas industries including lower carbon energy — Full ring ovalization test method for the evaluation of the cracking resistance of steel line pipe in sour service▲ISO/DIS 16961 Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks▲ISO/DIS 24201 Petroleum, petrochemical and natural gas industries — Bulk material for offshore projects — Tertiary outfitting structures▲ISO/FDIS 24202 Oil and gas industries including lower carbon energy — Bulk material for offshore projects — Monorail beam and padeye□ ISO/TC 61 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 67/SC 2 Pipeline transportation systems ; 발행된 표준 31개, 개발 중인 표준 18개▲ISO/TC 67/SC 3 Drilling and completion fluids, well cements and treatment fluids ; 발행된 표준 28개, 개발 중인 표준 0개▲ISO/TC 67/SC 4 Drilling, production and injection equipment ; 발행된 표준 55개, 개발 중인 표준 2개▲ISO/TC 67/SC 5 Casing, tubing and drill pipe ; 발행된 표준 12개, 개발 중인 표준 2개▲ISO/TC 67/SC 6 Process equipment, piping, systems, and related safety ; 발행된 표준 34개, 개발 중인 표준 5개▲ISO/TC 67/SC 7 Offshore structures ; 발행된 표준 22개, 개발 중인 표준 11개▲ISO/TC 67/SC 8 Arctic operations ; 발행된 표준 6개, 개발 중인 표준 0개▲ISO/TC 67/SC 9 Production, transport and storage facilities for cryogenic liquefied gases ; 발행된 표준 11개, 개발 중인 표준 2개