검색결과
-
[특집-기술위원회] TC 173 - 보조 용품(Assistive products)… 개인의 줄어든 능력을 보정하는데 도움을 주기 위한 보조 용품 및 관련 서비스스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 등도 포함된다.ISO/TC 173 보조 용품(Assistive products)과 관련된 기술위원회는 TC 171, TC 172와 마찬가지로 1978년 결성됐다. 사무국은 스웨덴 표준연구소(Swedish Institute for Standards, SIS)에서 맡고 있다.위원회는 조아킴 포크(Mr Joakim Falk)가 책임지고 있으며 현재 의장은 마리타 브런딘(Ms Marita Brundin)이며 임기는 2025년까지다. ISO 기술 프로그램 관리자는 마호 타카하시(Mme Maho Takahashi), ISO 편집 관리자는 발레리아 아가멤논(Ms Valeria Agamennone) 등으로 조사됐다.범위는 개인의 줄어든 능력을 보정하는데 도움을 주기 위한 보조 용품 및 관련 서비스 분야의 표준화다. 단 기타 기술위원회 및 시스템위원회에서 다루고 있는 보조용품들은 제외한다.교통 수단(ISO/TC 8, 20, 22), 건물 건축(ISO/TC 59), 가구(ISO/TC 136), 수술용 임플란트(ISO/TC 150), 보철물 및 교정 장치(ISO/TC 150)에 대한 접근 /TC 168), 광학 및 포토닉스(ISO/TC 172), 전기 안전(IEC/TC 62), 보청기(IEC/TC 29), ICT 기술(JTC 1) 및 인체공학에서 다루는 설계 원리(ISO/TC 159) 및 적극적 생활 지원(IEC SyCAAL) 등이 포함된다.현재 ISO/TC 173 사무국과 관련해 발행된 표준은 95개며 이 중 ISO/TC 173 사무국의 직접적인 책임 하에 발행된 표준은 24개다.ISO/TC 173 사무국과 관련해 개발 중인 표준은 22개며 ISO/TC 173 사무국의 직접적인 책임 하에 개발 중인 표준은 11개다. 참여하고 있는 회원은 26개국, 참관 회원은 29개국이다.□ ISO/TC 173 사무국의 직접적인 책임 하에 발행된 표준 24개 중 15개 목록▷ISO 10535:2021 Assistive products — Hoists for the transfer of persons — Requirements and test methods▷ISO 11199-1:2021 Assistive products for walking manipulated by both arms — Requirements and test methods — Part 1: Walking frames▷ISO 11199-2:2021 Assistive products for walking manipulated by both arms — Requirements and test methods — Part 2: Rollators▷ISO 11199-3:2005 Walking aids manipulated by both arms — Requirements and test methods — Part 3: Walking tables▷ISO 11334-1:2007 Assistive products for walking manipulated by one arm — Requirements and test methods — Part 1: Elbow crutches▷ISO 11334-4:1999 Walking aids manipulated by one arm — Requirements and test methods — Part 4: Walking sticks with three or more legs▷ISO/TR 11548-1:2001 Communication aids for blind persons — Identifiers, names and assignation to coded character sets for 8-dot Braille characters — Part 1: General guidelines for Braille identifiers and shift marks▷ISO/TR 11548-2:2001 Communication aids for blind persons — Identifiers, names and assignation to coded character sets for 8-dot Braille characters — Part 2: Latin alphabet based character sets▷ISO 17966:2016 Assistive products for personal hygiene that support users — Requirements and test methods▷ISO 19894:2019 Walking trolleys — Requirements and test methods▷ISO 20342-1:2022 Assistive products for tissue integrity when lying down — Part 1: General requirements▷ISO/TR 20342-7:2021 Assistive products for tissue integrity when lying down — Part 7: Foam properties, characteristics and performance▷ISO/TS 20342-10:2022 Assistive products for tissue integrity when lying down — Part 10: Guidance to cleaning, disinfecting and care of polyurethane APTI covers▷ISO 21801-1:2020 Cognitive accessibility — Part 1: General guidelines▷ISO 21801-2:2022 Cognitive accessibility — Part 2: Reporting□ ISO/TC 173 사무국의 직접적인 책임 하에 개발 중인 표준 11개 목록▷ISO 11199-2:2021/DAmd 1 Assistive products for walking manipulated by both arms — Requirements and test methods — Part 2: Rollators — Amendment 1: Eliminate brake requirements in 6.5 Structure requirements▷ISO/DIS 11334-4 Assistive products for walking, manipulated by one arm — Requirements and test methods — Part 4: Walking sticks with three or more legs▷ISO/CD 17966 Assistive products for toileting, bathing and showering — Requirements and test methods▷ISO/AWI TR 20342-2 Assistive products for tissue integrity when lying down — Part 2: Microclimate▷ISO/CD 20342-3 Assistive products for tissue integrity when lying down — Part 3: Strength and impact▷ISO/CD 20342-4 Assistive products for tissue integrity when lying down — Part 4: Durability▷ISO/DIS 20342-5 Assistive products for tissue integrity when lying down — Part 5: Resistance to cleaning and disinfection▷ISO/AWI 20342-6 Assistive products for tissue integrity when lying down — Part 6: Horizontal stiffness▷ISO/CD 20342-8 Assistive products for tissue integrity when lying down — Part 8: Pressure distribution▷IEC/DIS 80601-2-52 Medical electrical equipment — Part 2-52: Particular requirements for the basic safety and essential performance of medical beds▷IEC/DIS 80601-2-89 Medical electrical equipment — Part 2-89: Particular requirements for the basic safety and essential performance of medical beds for children□ ISO/TC 173 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 173/SC 1 Wheelchairs ; 발행된 표준 41개, 개발 중인 표준 6개▷ISO/TC 173/SC 2 Classification and terminology ; 발행된 표준 1개, 개발 중인 표준 0개▷ISO/TC 173/SC 3 Aids for ostomy and incontinence ; 발행된 표준 23개, 개발 중인 표준 4개▷ISO/TC 173/SC 7 Assistive products for persons with impaired sensory functions ; 발행된 표준 6개, 개발 중인 표준 1개
-
[특집-ISO/IEC JTC 1/SC 17 활동] 20. Form 08A Committee Decision for DIS: ISO/IEC 7816-3/AM 1: Additional voltage classes2023년 11월21일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Form 08A Committee Decision for DIS: ISO/IEC 7816-3/AM 1: Additional voltage classes' 관련된 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안 장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서인 'Form 08A Committee Decision for DIS: ISO/IEC 7816-3/AM 1: Additional voltage classes'는 2023년 8월24일 CD 협의를 기반으로 의장 결정에 의해 DIS 진출이 확정됐다.이 문서는 ISO/IEC 7816-3/AM 1 Identification cards — Integrated circuit cards— Part 3: Cards with contacts — Electrical interface and transmission protocols(신분증 - 집적 회로 카드 - 파트 3 : 접점이 있는 카드 - 전기 인터페이스 및 전송 프로토콜)의 수정안1 : 추가 전압 등급(Additional voltage classes)에 관한 것이다. 참고로 CD와 DIS는 국제표준화 단계를 의미한다. 세부적으로 설명하면 △CD는 Committee Stage의 약어로 위원회 단계 △DIS는 질의 단계(Enquiry Stage)를 뜻한다.
-
[특집-기술위원회] TC 167 - 강철 및 알루미늄 구조물(Steel and aluminium structures)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.△1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 △1976년 TC 165, TC 166 등도 포함된다.ISO/TC 167 강철 및 알루미늄 구조물(Steel and aluminium structures)과 관련된 기술위원회는 1977년 결성됐다. 사무국은 노르웨이 포준화국(Standards Norway, SN)에서 맡고 있다.위원회는 로알드 세그로프(Mr Roald Sægrov)가 책임지고 있으며 현재 의장은 비욘 우펠트(Mr Björn Uppfeldt)이며 임기는 2026년까지다. ISO 기술 프로그램 관리자는 안나 카테리나 로시(Dr Anna Caterina Rossi), ISO 편집 관리자는 클라우디아 루에제(Ms Claudia Lueje) 등으로 조사됐다.범위는 건축, 토목공항, 관련 구조물에 적용되는 것과 같은 강철 및 알루미늄 함금의 구조적 사용 분야의 표준화다.표준은 재료, 구조 구성 요소 및 연결부와 함께 강철 및 알루미늄 구조물의 설계, 제작 및 설치에 관한 요구 사항으로 구성된다.현재 ISO/TC 167 사무국의 직접적인 책임 하에 발행된 표준은 7개며 ISO/TC 167 사무국의 직접적인 책임 하에 개발 중인 표준은 4개다. 참여하고 있는 회원은 20개국, 참관 회원은 32개국이다.□ ISO/TC 167 사무국의 직접적인 책임 하에 발행된 표준 7개 목록▷ISO 10721-1:1997 Steel structures — Part 1: Materials and design▷ISO 17607-1:2023 Steel structures — Execution of structural steelwork — Part 1: General requirements and terms and definitions▷ISO 17607-2:2023 Steel structures — Execution of structural steelwork — Part 2: Steels▷ISO 17607-3:2023 Steel structures — Execution of structural steelwork — Part 3: Fabrication▷ISO 17607-4:2023 Steel structures — Execution of structural steelwork — Part 4: Erection▷ISO 17607-5:2023 Steel structures — Execution of structural steelwork — Part 5: Welding▷ISO 17607-6:2023 Steel structures — Execution of structural steelwork — Part 6: Bolting□ ISO/TC 167 사무국의 직접적인 책임 하에 개발 중인 표준 4개 목록▷ISO/CD 18900 Steel structures — Structural bolting — Test method for determining slip factor for faying surfaces▷ISO/CD 18953 Steel structures — Structural bolting — Test method to determine loss of pretension from faying surface coatings▷ISO/CD 18954 Steel structures — Structural Bolting — Test method to establish bolt tightening procedures▷ISO/WD 20895 Welded joints performance for seismic steel structures
-
[특집-기술위원회] TC 157 - 비체계적 피임약 및 성병(STI) 예방 콘돔(Non-systemic contraceptives and STI barrier prophylactics)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.△1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 등도 포함된다.ISO/TC 157 비체계적 피임약 및 성병(STI) 예방 콘돔(Non-systemic contraceptives and STI barrier prophylactics)과 관련된 기술위원회는 TC 156과 마찬가지로 1974년 결성됐다. 사무국은 말레이시아 표준부(Department of Standards Malaysia, DSM)에서 맡고 있다.위원회는 페리스 프레데릭(Mr Feris Frederick)이 책임지고 있다. 현재 의장은 파리다 하님 압 하난(Dr Faridah Hanim Ab Hanan)로 임기는 2026년까지다. ISO 기술 프로그램 관리자는 페트리샤 쿡(Mme Patricia Cook), ISO 편집 관리자는 마사 카산토산(Mrs Martha Casantosan) 등으로 조사됐다.범위는 비체계적 피임약 및 성병(sexually transmitted infections, STI)을 예방하기 위한 콘돔의 표준화다.현재 ISO/TC 157 사무국의 직접적인 책임 하에 발행된 표준은 18개며 ISO/TC 15 사무국의 직접적인 책임 하에 개발중인 표준은 2개다. 참여하고 있는 회원은 24개국, 참관 회원은 28개국이다.□ ISO/TC 157 사무국의 직접적인 책임 하에 발행된 표준 18개 목록▷ISO 4074:2015 Natural rubber latex male condoms — Requirements and test methods▷ISO 7439:2023 Copper-bearing contraceptive intrauterine devices — Requirements and tests▷ISO 8009:2014 Mechanical contraceptives — Reusable natural and silicone rubber contraceptive diaphragms — Requirements and tests▷ISO 11249:2018 Copper-bearing intrauterine contraceptive devices — Guidance on the design, execution, analysis and interpretation of clinical studies▷ISO 16037:2002 Rubber condoms for clinical trials — Measurement of physical properties▷ISO 16037:2002/Amd 1:2011 Rubber condoms for clinical trials — Measurement of physical properties — Amendment 1▷ISO 16038:2017 Male condoms — Guidance on the use of ISO 4074 and ISO 23409 in the quality management of condoms▷ISO 19351:2019 Fallopian rings — Requirements and test methods▷ISO 19671:2018 Additional lubricants for male natural rubber latex condoms — Effect on condom strength▷ISO/TR 19969:2018 Guidance on sample handling for determination of bursting volume and pressure, and testing for freedom from holes for male condom▷ISO 23409:2011 Male condoms — Requirements and test methods for condoms made from synthetic materials▷ISO/TR 24484:2023 Female condoms — Use of ISO 25841 and the quality management of female condoms▷ISO 25841:2017 Female condoms — Requirements and test methods▷ISO 25841:2017/Amd 1:2020 Female condoms — Requirements and test methods — Amendment 1▷ISO 29941:2010 Condoms — Determination of nitrosamines migrating from natural rubber latex condoms □ ISO/TC 157 사무국의 직접적인 책임 하에 개발 중인 표준 2개 목록▷ISO/CD 4074 Natural rubber latex male condoms — Requirements and test methods▷ISO/TS 23148 Compatibility of lubricants with synthetic male condoms
-
[특집-ISO/IEC JTC 1/SC 17 활동] 14. Result of voting on CD consultation for ISO/IEC 7816-3 AM 1지난 10월23일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Result of voting on CD consultation for ISO/IEC 7816-3 AM 1' 관련된 문서를 배포했다. ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안 장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다. ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 'Result of voting on CD consultation for ISO/IEC 7816-3 AM 1' 문서는 'ISO/IEC 7816-3:2006/CD Amd 1' 문서의 투표 결과에 대한 내용으로 구성됐다.문서의 주제는 '식별 카드 - 집적 회로 카드 - 제3부: 접점이 있는 카드 - 전기 인터페이스 및 전송 프로토콜 - 수정안 1: 추가 전압 등급(Identification cards — Integrated circuit cards — Part 3: Cards with contacts — Electrical interface and transmission protocols —Amendment 1: Additional voltage classes)이다.35개국이 투표에 참여했으며 'Do you have any comments related to the Committee Draft?' 질문에 2개국(싱가포르, 우크라이나)이 Yes, 15개국(오스트레일리아 등)은 No, 18개국(오스트리아 등)은Abstain 등으로 투표했다.- 이하 생략 -
-
[특집-기술위원회] TC 156 - 금속 및 합금의 부식(Corrosion of metals and alloys)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.△1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 등도 포함된다.ISO/TC 156 금속 및 합금의 부식(Corrosion of metals and alloys)과 관련된 기술위원회는 1974년 결성됐다. 사무국은 중국 국가표준화관리위원회(国家标准化管理委员会, Standardization Administration of the P. R. C, SAC)에서 맡고 있다.위원회는 호우 지에(Mrs Jie Hou)이 책임지고 있다. 현재 의장은 평 챠오(Mr Chao Feng)로 임기는 2025년까지다. ISO 기술 프로그램 관리자는 추 주안우(Ms Chuanyu Zou), ISO 편집 관리자는 엔 기엣(Ms Anne Guiet) 등으로 조사됐다.범위는 부식 테스트 방법, 부식 방지 방법 및 부식 제어 엔지니어링 수명주기를 포함한 금속 및 합금 부식 분야의 표준화다. ISO 내에서 이러한 분야의 활동에 대한 일반적인 조정자 역할도 수행한다.현재 ISO/TC 156 사무국과 관련해 발행된 표준은 118개며 직접적인 책임 하에 발행된 표준은 114개다. ISO/TC 156 사무국과 관련해 개발 중인 표준은 28개며 직접적인 책임하에 개발중인 표준은 26개다. 참여하고 있는 회원은 24개국, 참관 회원은 26개국이다.□ ISO/TC 156 사무국의 직접적인 책임 하에 발행된 표준 114개 중 15개 목록▷ISO 3079:2022 Two-electrode method using acetic acid to measure pitting potential of aluminium and aluminium alloys in chloride solutions▷ISO 3651-1:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)▷ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid▷ISO 3651-3:2017 Determination of resistance to intergranular corrosion of stainless steels — Part 3: Corrosion test for low-Cr ferritic stainless steels▷ISO 4212:2023 Corrosion of metals and alloys — Method of oxalic acid etching test for intergranular corrosion of austenitic stainless steel▷ISO 4215:2022 Corrosion of metals and alloys — Test method for high-temperature corrosion testing of metallic materials by thermogravimetry under isothermal or cyclic conditions▷ISO 4631:2023 Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion potential (E-CLCP) for Ti alloys fabricated via additive manufacturing method in simulated biomedical solutions▷ISO 4680:2022 Corrosion of metals and alloys — Uniaxial constant-load test method for evaluating susceptibility of metals and alloys to stress corrosion cracking in high-purity water at high temperatures▷ISO 4905:2023 Corrosion of metals and alloys — Electrochemical test methods for high-temperature corrosion testing of metallic materials in molten salts▷ISO 5156:2022 Corrosion of metals and alloys — Corrosion test method for disinfectant — Total immersion method▷ISO 5668:2023 Corrosion of metals and alloys — Guidelines and requirements for corrosion testing in simulated environment of deep-sea water▷ISO 6509-1:2014 Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 1: Test method▷ISO 6509-2:2017 Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 2: Assessment criteria▷ISO 7384:1986 Corrosion tests in artificial atmosphere — General requirements▷ISO 7441:2015 Corrosion of metals and alloys — Determination of bimetallic corrosion in atmospheric exposure corrosion tests □ ISO/TC 156 사무국의 직접적인 책임 하에 개발 중인 표준 26개 중 15개 목록▷ISO/DIS 5929 Corrosion of Metals and Alloys — Test and evaluation method for the corrosion of steel bar embedded in concrete structure exposed to total corrosion zones in marine environments▷ISO/DIS 7054 Corrosion of metals and alloys — Wiping method for measurements of gases and particles on real structures and equipment▷ISO 7539-6:2018/DAmd 1 Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement — Amendment 1▷ISO/DIS 8044 Corrosion of metals and alloys — Vocabulary▷ISO 8407:2021/CD Amd 1 Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens — Amendment 1▷ISO/TR 8547 Corrosion of metals and alloys — Exposure test results in the Asian Monsoon region▷ISO/AWI TR 8564 Corrosion of metals and alloys — Reference data for ISO16539 Method B▷ISO 9227:2022/DAmd 1 Corrosion tests in artificial atmospheres — Salt spray tests — Amendment 1: Footnote of warning▷ISO/CD 9350 Corrosion of Metals and Alloys — Testing method for corrosion resistance for hafnium in the hightemperature and pressure▷ISO/DIS 9351 Galvanic anodes for cathodic protection in seawater and saline sediments▷ISO/DIS 9812 Corrosion of metals and alloys — Corrosion test method for disinfectant — Spray test method▷ISO 10062:2022/DAmd 1 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) — Amendment 1: Footnote of warning▷ISO/CD TR 11303 Corrosion of metals and alloys — Guidelines for selection of protection methods against atmospheric corrosion▷ISO 11782-2:1998/DAmd 1 Corrosion of metals and alloys — Corrosion fatigue testing — Part 2: Crack propagation testing using precracked specimens — Amendment 1▷ISO/AWI 16364 Guidelines for Galvanic Corrosion Control□ ISO/TC 156 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 156/SC 1 Corrosion control engineering life cycle : 발행된 표준 4개, 개발 중인 표준 2개
-
[기획-디지털 ID 기술] (61)뱅크오브아메리카, '디지털 이미지 처리를 위한 상황별 분석' 명칭의 미국 특허 등록 (US 11823476)미국 글로벌 금융기업 뱅크오브아메리카(Bank of America)에 따르면 2023년 11월21일 '디지털 이미지 처리를 위한 상황별 분석(Contextual analysis for digital image processing)' 명칭의 미국 특허(US 11823476)가 등록됐다.본 등록 특허(US 11823476)는 2021년 5월25일 출원(US 17/329957)된 후 미국 특허청에 의해 심사를 받았다. 본 등록 특허(US 11823476)는 타겟 데이터 구조를 식별하는 디지털 문서를 처리하기 위한 리퀘스트(request)를 수신하는 장치에 관한 특허다.본 등록 특허의 일 실시예에 따르면 디지털 문서를 획득하고 디지털 문서 내의 객체를 식별하기 위해 디지털 문서를 처리하도록 구성된다.디지털 문서에 기초하여 디지털 문서에 대한 상황별 메타데이터를 출력하도록 구성된 머신 러닝 모델에 디지털 문서가 입력되도록 추가로 구성된다.상황별 메타데이터는 디지털 문서 내에서 식별된 개체의 속성을 설명한다. 디지털 문서 내에서 식별된 객체에 대한 식별자로 타겟 데이터 구조의 항목 중 제1 하위 집합을 채우도록 구성된다.타겟 데이터 구조의 항목중 두 번째 하위 집합을 문맥 메타데이터로 채우도록 구성된다. 채워진 타겟 데이터 구조를 네트워크 장치로 전송하도록 추가적으로 구성한다.
-
[특집-기술위원회] TC 142 - 공기 및 기타 가스 청소 장비(Cleaning equipment for air and other gases)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다. 기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 등이다.△1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111, △1964년 TC 112~TC 115, TC 117, △1965년 TC 118, △1966년 TC 119~TC 122, △1967년 TC 123, △1968년 TC 126, TC 127, △1969년 TC 130~136 등도 포함된다.ISO/TC 142 공기 및 기타 가스 청소 장비(Cleaning equipment for air and other gases) 관련된 기술위원회는 TC 137, TC 138과 마찬가지로 1970년 결성됐다. 사무국은 이탈리아 표준화기구(Ente Italiano di Normazione, UNI)에서 맡고 있다.위원회는 안나 마르티노(Mrs Anna Martino)가 책임지고 있다. 현재 의장은 리카르도 로마노(Mr Riccardo Romanò)으로 임기는 2025년까지다.ISO 기술 프로그램 관리자는 블란딘 가르시아(Mme Blandine Garcia), ISO 편집 관리자는 앤 기엣(Ms Anne Guiet) 등으로 조사됐다.범위는 일반 환기 및 산업용 응용 분야의 공기 및 가스 청소, 소독 장비에 대한 용어, 분류, 특성, 테스트 및 성능 방법 분야의 표준화다.단, 다른 ISO 기술 위원회의 범위 내에 있는 모바일 장비의 가스 터빈 및 IC 엔진용 배기 가스 세정기는 제외한다. 또한 기술 위원회 ISO/TC 94 업무 분야인 개인 보호 장비용 필터, ISO/TC 22, 23 및 127이 적용되는 모바일 장비의 캐빈 필터 등도 표준화 범위에서 제외된다.현재 ISO/TC 142 사무국의 직접적인 책임 하에 발행된 표준은 27개며 ISO/TC 142 사무국의 직접적인 책임 하에 개발 중인 표준은 22개다. 참여하고 있는 회원은 23개국, 참관 회원은 20개국이다.□ ISO/TC 142 사무국의 직접적인 책임 하에 발행된 표준 27개 중 15개 목록▷ISO 10121-1:2014 Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation — Part 1: Gas-phase air cleaning media▷ISO 10121-2:2013 Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation — Part 2: Gas-phase air cleaning devices (GPACD)▷ISO 10121-3:2022 Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation — Part 3: Classification system for GPACDs applied to treatment of outdoor air▷ISO 15714:2019 Method of evaluating the UV dose to airborne microorganisms transiting in-duct ultraviolet germicidal irradiation devices▷ISO 15727:2020 UV-C devices — Measurement of the output of a UV-C lamp▷ISO 15858:2016 UV-C Devices — Safety information — Permissible human exposure▷ISO 15957:2015 Test dusts for evaluating air cleaning equipment▷ISO 16170:2016 In situ test methods for high efficiency filter systems in industrial facilities▷ISO 16890-1:2016 Air filters for general ventilation — Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM)▷ISO 16890-2:2022 Air filters for general ventilation — Part 2: Measurement of fractional efficiency and air flow resistance▷ISO 16890-3:2016 Air filters for general ventilation — Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured▷ISO 16890-4:2022 Air filters for general ventilation — Part 4: Conditioning method to determine the minimum fractional test efficiency▷ISO 16891:2016 Test methods for evaluating degradation of characteristics of cleanable filter media▷ISO 21083-1:2018 Test method to measure the efficiency of air filtration media against spherical nanomaterials — Part 1: Size range from 20 nm to 500 nm▷ISO/TS 21083-2:2019 Test method to measure the efficiency of air filtration media against spherical nanomaterials — Part 2: Size range from 3 nm to 30 nm□ ISO/TC 114 사무국의 직접적인 책임 하에 개발 중인 표준 22개 중 15개 목록▷ISO/CD 5371 High efficiency filtration units in exhaust ventilation system of biosafety facilities▷ISO/AWI 10121-1 Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation — Part 1: Gas-phase air cleaning media▷ISO/AWI 10121-2 Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation — Part 2: Gas-phase air cleaning devices (GPACD)▷ISO/CD 15858 UV-C Devices — Safety information — Permissible human exposure▷ISO/AWI 15957 Test dusts for evaluating air cleaning equipment▷ISO/DIS 16313-1 Laboratory test of dust collection systems utilizing porous filter media online cleaned using pulses of compressed gas — Part 1: Systems utilizing integrated fans▷ISO/AWI 16890-1 Air filters for general ventilation — Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM)▷ISO/DIS 16890-3 Air filters for general ventilation — Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured▷ISO/AWI 17597 Test Method for Measuring in-duct AirborneMicroorganisms Inactivation Effectiveness (AMIE)▷ISO/FDIS 23137-1 Requirements for aerosol filters used in nuclear facilities against specified severe conditions — Part 1: General requirements▷ISO/DIS 23138 Biological equipment for treating air and other gases — Principles and classification▷ISO/DIS 23742 Test method for the evaluation of permeability and filtration efficiency distribution of bag filter medium▷ISO/FDIS 29461-3 Air intake filter systems for rotary machinery — Test methods — Part 3: Mechanical integrity of filter elements▷ISO/CD 29461-4 Air intake filter systems for rotary machinery — Part 4: Test methods for static filter systems in coastal and offshore environments▷ISO/DIS 29463-1 High efficiency filters and filter media for removing particles from air — Part 1: Classification, performance, testing and marking
-
[특집-기술위원회] TC 137 - 신발 사이즈 지정 및 표시 시스템(Footwear sizing designations and marking systems)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다. 기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 등이다.△1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111, △1964년 TC 112~TC 115, TC 117, △1965년 TC 118, △1966년 TC 119~TC 122, △1967년 TC 123, △1968년 TC 126, TC 127, △1969년 TC 130~136 등도 포함된다.ISO/TC 137 신발 사이즈 지정 및 표시 시스템(Footwear sizing designations and marking systems)과 관련된 기술위원회는 1970년 결성됐다. 사무국은 남아프리카공화국 표준국(South African Bureau of Standards, SABS)에서 맡고 있다.위원회는 마헤쉬 나게샤르(Mr Mahesh Nagessar)가 책임지고 있다. 현재 의장은 장 웨이후안(Ms Weijuan Zhang)으로 임기는 2025년까지다.ISO 기술 프로그램 관리자는 몬자 코르터(Ms Monja Korter), ISO 편집 관리자는 발레리아 아가멤논(Ms Valeria Agamennone) 등으로 조사됐다.범위는 발 측정, 해당 사이즈의 지정 및 표시를 기반으로 한 신발 사이즈 시스템의 표준화다. 또한 디지털 데이터의 사용 및 용어를 포함해 단위 및 간격과 같은 크기 범위의 표준화뿐 아니라 마지막 또는 동등한 장비를 교정하는 시스템의 표준화도 포함된다.현재 ISO/TC 137 사무국의 직접적인 책임 하에 발행된 표준은 5개다. 참여하고 있는 회원은 13개국, 참관 회원은 26개국이다.□ ISO/TC 137 사무국 분과위원회(Subcommittee)의 책임 하에 발행된 표준 5개 목록▷ISO 9407:2019 Footwear sizing — Mondopoint system of sizing and marking▷ISO 19407:2023 Footwear — Sizing — Conversion of sizing systems▷ISO 19408:2023 Footwear — Sizing — Vocabulary▷ISO 19409:2022 Footwear — Sizing — Measurement of last dimensions▷ISO 19410-1:2022 Footwear sizing — In-shoe measurement — Part 1: Shoe length
-
[미국] 특허법 101조는 발명의 성립성에 대한 내용 규정미국 특허법 101조는 발명의 성립성에 대한 내용을 규정하고 있다. 발명이 특허로 인정을 받을 수 있도록 특허법에서 규정된 형식에 맞도록 특허 명세서가 작성돼야 한다.이와 관련된 예를 보여주는 미국 연방순회항소법원(Federal Circuit)의 2019년 ChargePoint Inc.(원고) 와 Sema Connect Inc.(피고) 사이의 판결은 아래와 같다.국문요약:미국 연방순회항소법원은 본 특허가 “향상된 충전소”에 대한 것이 아니라 “전기 충전소에 인가된 네트워크"에 관한 아이디어라는 점을 언급했다.결과적으로 “네트워크화된 충전소”와 관련된 특허를 무효화했다. 특허 명세서가 미국 특허법의 규칙에 맞지 않아 특허등록이 무효화돤 사례이다.영문요약 : S101 Involving Electric Vehicle TechnologyChargePoint Inc. v. Sema Connect Inc. (F.C. 2019)History:S101 Invalidation:•FC affirmed and invalidated a patent related to networked charging stations.•Patent owner argued that the invention improved charging stations by allowing the stations to be managed from a central location, and allowing drivers to locate stations, and allowing users to interact intelligently with the electricity grid.•Not abstract b/c the invention is tangible and builds a better machine.•District Court:•Disagreed with the patent owner.•Asserted claims were directed to the abstract idea of communication over a network to interact with a device connected to the network.•Federal Circuit:•FC affirmed and analyzed specification:•“specification also makes clear –by what it states and what it does not –that the invention is the idea of network-controlled charging stations.”•“the specification never suggests that the charging station itself is improved from a technical perspective.”•Patent is directed to the idea of communicating over a network applied to electric car charging stations, instead of being directed to an improved charging station.•Many consider this case to be inconsistent with the new USPTO guidance.•Claim 1 included numerous physical electrical components, but FC ignored them.•It may take some time for USPTO and FC to reach an agreement on S101 analysis.