검색결과
-
[특집-기술위원회] TC 199 - 기계류 안전(Safety of machinery)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 △1988년 TC 192~TC 194 △1989년 TC 195 △1990년 TC 197, TC 198 등이 있다.ISO/TC 199 기계류 안전(Safety of machinery)과 관련된 기술위원회는 1991년 결성됐다. 사무국은 독일 표준화기구(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다.위원회는 크리스티안 톰(Mr Dr. rer. nat Christian Thom)가 책임지고 있다. 현재 의장은 오토 괴르네만(Mr Otto Görnemann)이다.ISO 기술 프로그램 관리자는 메르세 페레 에르난데스(Mme Mercè Ferrés Hernández), ISO 편집 관리자는 클라우디아 루에제(Ms Claudia Lueje) 등이다.범위는 ISO/IEC 가이드 51 프레임워크 및 ISO, IEC 기술 위원회와 협력해 용어, 방법론, 보호 장치 및 안전 장치를 통합한 기계 안전에 대한 기본 개념 및 일반 원칙의 표준화다.단, ISO/IEC Guide 51에 정의되어 있고 다른 ISO 또는 IEC 기술 위원회의 작업에서 명시적으로 다루고 있는 제품 안전 표준은 제외한다.현재 ISO/TC 199 사무국의 직접적인 책임 하에 발행된 표준은 45개며 ISO/TC 199 사무국의 직접적인 책임 하에 개발 중인 표준은 9개다. 참여하고 있는 회원은 26개국, 참관 회원은 25개국이다.□ ISO/TC 199 사무국의 직접적인 책임 하에 발행된 표준 45개 중 15개 목록▷ISO Guide 78:2012 Safety of machinery — Rules for drafting and presentation of safety standards▷ISO 11161:2007 Safety of machinery — Integrated manufacturing systems — Basic requirements▷ISO 11161:2007/Amd 1:2010 Safety of machinery — Integrated manufacturing systems — Basic requirements — Amendment 1▷ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction▷ISO 13849-1:2023 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design▷ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation▷ISO 13850:2015 Safety of machinery — Emergency stop function — Principles for design▷ISO 13851:2019 Safety of machinery — Two-hand control devices — Principles for design and selection▷ISO 13854:2017 Safety of machinery — Minimum gaps to avoid crushing of parts of the human body▷ISO 13855:2010 Safety of machinery — Positioning of safeguards with respect to the approach speeds of parts of the human body▷ISO 13856-1:2013 Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors▷ISO 13856-2:2013 Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars▷ISO 13856-3:2013 Safety of machinery — Pressure-sensitive protective devices — Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices▷ISO 13857:2019 Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs▷ISO 14118:2017 Safety of machinery — Prevention of unexpected start-up□ ISO/TC 199 사무국의 직접적인 책임 하에 개발 중인 표준 9개 목록▷ISO/AWI 12100 Safety of machinery — General principles for design — Risk assessment and risk reduction▷ISO/DIS 12895 Safety of machinery — Identification of whole body access and prevention of associated risk(s)▷ISO/AWI 13849-2 Safety of machinery — Safety-related parts of control systems — Part 2: Guidance for the design and validation▷ISO/AWI TR 13849-3 Safety of machinery — Safety-related parts of control systems — Part 3: Markov model-based PFH calculation▷ISO/FDIS 13855 Safety of machinery — Positioning of safeguards with respect to the approach of the human body▷ISO/FDIS 14119 Safety of machinery — Interlocking devices associated with guards — Principles for design and selection▷ISO/AWI 14122-1 Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means of access between two levels▷ISO/AWI 14159 Safety of machinery — Hygiene requirements for the design of machinery▷ISO/CD TR 21260 Safety of machinery — Mechanical safety data for physical contacts between moving machinery or moving parts of machinery and persons
-
[특집-기술위원회] TC 197 - 수소 기술(Hydrogen technologies)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 △1988년 TC 192~TC 194 △1989년 TC 195 등이 있다.ISO/TC 197 수소 기술(Hydrogen technologies)과 관련된 기술위원회는 1990년 결성됐다. 사무국은 캐나다 표준위원(Standards Council of Canada, SCC)에서 맡고 있다.위원회는 시아시아 모렐(Mr Siasia Morel)가 책임지고 있다. 현재 의장은 이케다 테츠후미(Mr Tetsufumi IKEDA)이며 임기는 2024년 말까지다. ISO 기술 프로그램 관리자는 키르시 실란데르-반 후넨(Mrs Kirsi Silander-van Hunen), ISO 편집 관리자는 아룬 ABY 파라에카틸(Mr Arun ABY Paraecattil)등이다. 범위는 수소 생산, 저장, 운송, 측정 및 사용을 위한 시스템 및 장치 분야의 표준화다.현재 ISO/TC 197 사무국과 관련해 발행된 표준은 19개며 ISO/TC 197 사무국의 직접적인 책임 하에 발행된 표준은 18개다.ISO/TC 197 사무국과 관련해 개발 중인 표준은 22개며 ISO/TC 197 사무국의 직접적인 책임 하에 개발 중인 표준은 21개다. 참여하고 있는 회원은 35개국, 참관 회원은 18개국이다.□ ISO/TC 197 사무국의 직접적인 책임 하에 발행된 표준 18개 중 15개 목록▷ISO 13984:1999 Liquid hydrogen — Land vehicle fuelling system interface▷ISO 13985:2006 Liquid hydrogen — Land vehicle fuel tanks▷ISO 14687:2019 Hydrogen fuel quality — Product specification▷ISO/TR 15916:2015 Basic considerations for the safety of hydrogen systems▷ISO 16110-1:2007 Hydrogen generators using fuel processing technologies — Part 1: Safety▷ISO 16110-2:2010 Hydrogen generators using fuel processing technologies — Part 2: Test methods for performance▷ISO 16111:2018 Transportable gas storage devices — Hydrogen absorbed in reversible metal hydride▷ISO 17268:2020 Gaseous hydrogen land vehicle refuelling connection devices▷ISO 19880-1:2020 Gaseous hydrogen — Fuelling stations — Part 1: General requirements▷ISO 19880-3:2018 Gaseous hydrogen — Fuelling stations — Part 3: Valves▷ISO 19880-5:2019 Gaseous hydrogen — Fuelling stations — Part 5: Dispenser hoses and hose assemblies▷ISO 19880-8:2019 Gaseous hydrogen — Fuelling stations — Part 8: Fuel quality control▷ISO 19880-8:2019/Amd 1:2021 Gaseous hydrogen — Fuelling stations — Part 8: Fuel quality control — Amendment 1: Alignment with Grade D of ISO 14687▷ISO 19881:2018 Gaseous hydrogen — Land vehicle fuel containers▷ISO 19882:2018 Gaseous hydrogen — Thermally activated pressure relief devices for compressed hydrogen vehicle fuel containers□ ISO/TC 197 사무국의 직접적인 책임 하에 개발 중인 표준 21개 중 15개 목록▷ISO/WD 13984 Liquid Hydrogen Land Vehicle Fueling Protocol▷ISO/AWI 13985 Liquid hydrogen — Land vehicle fuel tanks▷ISO/DIS 14687 Hydrogen fuel quality — Product specification▷ISO/DIS 17268-1 Gaseous hydrogen land vehicle refuelling connection devices — Part 1: Flow capacities up to and including 120 g/s▷ISO/AWI 17268-2 Gaseous hydrogen land vehicle refuelling connection devices — Part 2: Part 2: Flow capacities greater than 120 g/s▷ISO/AWI 17268-3 Gaseous hydrogen land vehicle refuelling connection devices — Part 3: Cryo-compressed hydrogen gas▷ISO/DIS 19880-2 Gaseous hydrogen — Fuelling stations — Part 2: Dispensers and dispensing systems▷ISO/CD 19880-5 Gaseous hydrogen — Fuelling stations — Part 5: Dispenser hoses and hose assemblies▷ISO/DIS 19880-7 Gaseous hydrogen — Fuelling stations — Part 7: Rubber O-rings▷ISO/DIS 19880-8 Gaseous hydrogen — Fuelling stations — Part 8: Fuel quality control▷ISO/DIS 19880-9 Gaseous hydrogen — Fuelling stations — Part 9: Sampling for fuel quality analysis▷ISO/AWI TS 19880-10 Gaseous hydrogen — Fuelling stations — Part 10: Mobile fueling stations▷ISO/DIS 19881 Gaseous hydrogen — Land vehicle fuel containers▷ISO/DIS 19882 Gaseous hydrogen — Thermally activated pressure relief devices for compressed hydrogen vehicle fuel containers▷ISO/AWI 19884-1 Gaseous Hydrogen - Pressure vessels for stationary storage — Part 1: Part 1: general requirements□ ISO/TC 197 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 197/SC 1 Hydrogen at scale and horizontal energy systems ; 발행된 표준 1개, 개발 중인 표준 1개
-
[특집-기술위원회] TC 195 - 건축 기계 및 장비(Building construction machinery and equipment)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 △1988년 TC 192~TC 194 등이 있다.ISO/TC 195 건축 기계 및 장비(Building construction machinery and equipment)와 관련된 기술위원회는 1989년 결성됐다. 사무국은 중국 국가표준화관리위원회(国家标准化管理委员会, Standardization Administration of the P. R. C, SAC)에서 맡고 있다.위원회는 솽 리우(Mr Shuang LIU)가 책임지고 있다. 현재 의장은 징 리(Ms Jing Li)이며 임기는 2025년 말까지다. ISO 기술 프로그램 관리자는 몬자 코르터(Ms Monja Korter), ISO 편집 관리자는 이본느 헨(Mrs Yvonne Chen)등이다. 범위는 아래 내용을 포함한 건설 현장에서 사용되는 기계 및 장비 분야의 표준화다.표준화에 포함되는 내용은 △콘크리트 기계(예: 배처, 믹서, 펌프, 분무기, 운송, 진동기, 플로팅) △기초 기계(예: 말뚝 박기, 다이어프램 벽 설치, 흙 천공, 분사, 그라우팅, 토양 및 암석 혼합물용 드릴 장비) △골재 처리 기계(예: 스크리닝, 파쇄) △도로 건설 및 유지 관리 기계 및 장비 △터널 굴착 기계(TBM) 및 관련 기계 및 장비[예: 차폐 터널 보링 머신, 비차폐 터널 보링 머신, 텔레스코픽 쉴드 머신, 리머 머신, 마이크로 터널링 머신, 스러스트 보링 머신, 오거 보링 머신(채광용 제외), 에어록, TBM용 구조 챔버, 터널 보링 멀티서비스 차량(MSV)] △비계 등이다.또한 건축 자재의 생산 및 가공은 △자연석의 세공 △미세하고 무거운 점토 및 내화 세라믹 제조 △판유리, 중공유리, 특수유리의 생산, 처리, 가공 △현장에서 건축 자재를 처리하는 기계 및 장비 △도로 운영 기계 및 장비와 관련 서비스 △명명법 △애플리케이션 △분류 △평가 △기술 요구 사항 △테스트 방법 △안전 요구 사항 등을 포함한다.단, 고체 광물 물질 추출용 장비[예: 로드 헤더, 연속 광부, 착암기, 인상 천공기, 고벽 광부, LHD, 광산 오거 천공기), RMDS(신속 광산 개발 시스템)(ISO/TC 82)], 크레인(ISO/TC 96), 토공 기계 (ISO / TC 127), 승강 작업 플랫폼(ISO/TC 214), 건축 및 토목 공사(ISO/TC 59) 등은 제외한다.현재 ISO/TC 195 사무국과 관련해 발행된 표준은 39개며 ISO/TC 195 사무국의 직접적인 책임 하에 발행된 표준은 21개다.ISO/TC 195 사무국과 관련해 개발 중인 표준은 21개며 ISO/TC 195 사무국의 직접적인 책임 하에 개발 중인 표준은 8개다. 참여하고 있는 회원은 17개국, 참관 회원은 17개국이다.□ ISO/TC 195 사무국의 직접적인 책임 하에 발행된 표준 21개 중 15개 목록▷ISO 11375:1998 Building construction machinery and equipment — Terms and definitions▷ISO/TR 12603:2010 Building construction machinery and equipment — Classification▷ISO 15642:2003 Road construction and maintenance equipment — Asphalt mixing plants — Terminology and commercial specifications▷ISO 15643:2020 Road construction and maintenance equipment — Bituminous binder sprayers and synchronous bituminous binder sprayers-chip spreaders — Terminology and commercial specifications▷ISO 15644:2002 Road construction and maintenance equipment — Chippings spreaders — Terminology and commercial specifications▷ISO 15645:2018 Road construction and maintenance equipment — Road milling machinery — Terminology and commercial specifications▷ISO 15688:2012 Road construction and maintenance equipment — Soil stabilizers — Terminology and commercial specifications▷ISO 15689:2003 Road construction and maintenance equipment — Powder binder spreaders — Terminology and commercial specifications▷ISO 15878:2021 Road construction and maintenance equipment — Paver-finishers — Commercial specifications▷ISO 16039:2004 Road construction and maintenance equipment — Slipform pavers — Definitions and commercial specifications▷ISO 16039:2004/Amd 1:2013 Road construction and maintenance equipment — Slipform pavers — Definitions and commercial specifications — Amendment 1▷ISO 19432-1:2020 Building construction machinery and equipment — Portable, hand-held, internal combustion engine-driven abrasive cutting machines — Part 1: Safety requirements for cut-off machines for centre-mounted rotating abrasive wheels▷ISO 19433:2008 Building construction machinery and equipment — Pedestrian-controlled vibratory plates — Terminology and commercial specifications▷ISO 19452:2008 Building construction machinery and equipment — Pedestrian-controlled vibratory (percussion) rammers — Terminology and commercial specifications▷ISO 19452:2008/Cor 1:2008 Building construction machinery and equipment — Pedestrian-controlled vibratory (percussion) rammers — Terminology and commercial specifications — Technical Corrigendum 1□ ISO/TC 195 사무국의 직접적인 책임 하에 개발 중인 표준 8개 목록▷ISO/AWI 19432-2 Building construction machinery and equipment — Portable, hand-held, internal combustion engine-driven abrasive cutting machines — Part 2: Machines for abrasive chains — Safety requirements▷ISO/FDIS 20500-1 Mobile road construction machinery — Safety — Part 1: Common requirements▷ISO/FDIS 20500-2 Mobile road construction machinery — Safety — Part 2: Specific requirements for road-milling machines▷ISO/FDIS 20500-3 Mobile road construction machinery — Safety — Part 3: Specific requirements for soil-stabilising machines and recycling machines▷ISO/FDIS 20500-4 Mobile road construction machinery — Safety — Part 4: Specific requirements for compaction machines▷ISO/FDIS 20500-5 Mobile road construction machinery — Safety — Part 5: Specific requirements for paver-finishers▷ISO/FDIS 20500-6 Mobile road construction machinery — Safety — Part 6: Specific requirements for mobile feeders▷ISO/FDIS 20500-7 Mobile road construction machinery — Safety — Part 7: Specific requirements for slipform pavers and related machines□ ISO/TC 195 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 195/SC 1 Machinery and equipment for concrete work ; 발행된 표준 14개, 개발 중인 표준 4개▷ISO/TC 195/SC 2 Road operation machinery and associated equipment ; 발행된 표준 1개, 개발 중인 표준 1개▷ISO/TC 195/SC 3 Drilling and foundation machinery and equipment ; 발행된 표준 3개, 개발 중인 표준 8개
-
국표원, 풍력발전 산업 경쟁력 강화 위한 표준화 논의풍력산업 경쟁력 강화를 위한 표준화가 논의됐다. 산업통상자원부 국가기술표준원은 21일 서울 한국산업기술기획평가원에서 산·학·연 풍력발전 전문가 간담회를 개최하고 국내 풍력산업계의 수요를 바탕으로 풍력발전의 산업경쟁력 강화를 지원하기 위한 표준화 전략을 논의했다고 밝혔다. 국표원은 탄소중립 달성과 풍력산업 활성화를 위해 지난 1년간 산·학·연 전문가로 구성된 ‘풍력발전 표준화 포럼’을 통해 핵심부품(해저케이블, 지지구조물, 블레이드 등), 초대형 풍력발전, 프로젝트 인증 관련 표준화 전략을 준비해왔다. 이날 간담회는 그간 준비한 전략에 대해 산·학·연 풍력발전 전문가 20여 명과 함께 논의하고 업계 애로사항 등을 청취하기 위해 마련됐다. 전문가들은 표준화를 통해 국제시장 대응 및 국내산업 성장에 실체적인 도움이 되기 위한 다양한 의견을 제시했다. 특히 향후 대규모 풍력단지 개발과 함께 국내 풍력발전 표준화가 구체적으로 진행되는데 기대감을 표시했다. 진종욱 국표원장은 “탄소중립 이행을 위한 세계 각국의 전략에서 풍력발전은 필수 수단”이라며 “국내 풍력산업이 글로벌 경쟁력을 갖고 성장할 수 있도록 표준화 분야에서도 적극 지원하겠다”고 밝혔다.
-
[특집-기술위원회] TC 194 - 의료 장비의 생물학적 및 임상적 평가(Biological and clinical evaluation of medical devices)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 등이 있다.ISO/TC 194 의료 장비의 생물학적 및 임상적 평가(Biological and clinical evaluation of medical devices)와 관련된 기술위원회는 TC 192, TC 193과 마찬가지로 1988년 결성됐다. 사무국은 독일 표준화기구(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다.위원회는 수잔 민크위츠(Mrs Dr Susann Minkwitz)가 책임지고 있다. 현재 의장은 제레미 팅클러(Mr Jeremy Tinkler)이며 임기는 2026년 말까지다. ISO 기술 프로그램 관리자는 패트리샤 쿡(Mme Patricia Cook), ISO 편집 관리자는 산잘리 자인(Ms Sanjali Jain)등이다.범위는 해당 장치의 인간 임상 조사에 대한 우수 임상 실습 원칙 뿐 아니라 해당 재료 및 장치에 적용 가능한 생물학적 테스트 방법과 함께 의료 및 치과 재료 및 장치의 생물학적 및 임상 평가에 대한 접근 방식의 표준화다.현재 ISO/TC 194 사무국의 직접적인 책임 하에 발행된 표준은 37개 ISO/TC 194 사무국의 직접적인 책임 하에 개발 중인 표준은 16개다. 참여하고 있는 회원은 33개국, 참관 회원은 19개국이다.□ ISO/TC 194 사무국의 직접적인 책임 하에 발행된 표준 37개 중 15개 목록▷ISO 10993-1:2018 Biological evaluation of medical devices — Part 1: Evaluation and testing within a risk management process▷ISO 10993-2:2022 Biological evaluation of medical devices — Part 2: Animal welfare requirements▷ISO 10993-3:2014 Biological evaluation of medical devices — Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity▷ISO 10993-4:2017 Biological evaluation of medical devices — Part 4: Selection of tests for interactions with blood▷ISO 10993-5:2009 Biological evaluation of medical devices — Part 5: Tests for in vitro cytotoxicity▷ISO 10993-6:2016 Biological evaluation of medical devices — Part 6: Tests for local effects after implantation▷ISO 10993-7:2008 Biological evaluation of medical devices — Part 7: Ethylene oxide sterilization residuals▷ISO 10993-7:2008/Amd 1:2019 Biological evaluation of medical devices — Part 7: Ethylene oxide sterilization residuals — Amendment 1: Applicability of allowable limits for neonates and infants▷ISO 10993-7:2008/Cor 1:2009 Biological evaluation of medical devices — Part 7: Ethylene oxide sterilization residuals — Technical Corrigendum 1▷ISO 10993-9:2019 Biological evaluation of medical devices — Part 9: Framework for identification and quantification of potential degradation products▷ISO 10993-10:2021 Biological evaluation of medical devices — Part 10: Tests for skin sensitization▷ISO 10993-11:2017 Biological evaluation of medical devices — Part 11: Tests for systemic toxicity▷ISO 10993-12:2021 Biological evaluation of medical devices — Part 12: Sample preparation and reference materials▷ISO 10993-13:2010 Biological evaluation of medical devices — Part 13: Identification and quantification of degradation products from polymeric medical devices▷ISO 10993-14:2001 Biological evaluation of medical devices — Part 14: Identification and quantification of degradation products from ceramics□ ISO/TC 194 사무국의 직접적인 책임 하에 개발 중인 표준 16개 목록▷ISO/CD 8250 Cleanliness of medical devices — Process design and test methods▷ISO/CD 10993-1.2 Biological evaluation of medical devices — Part 1: Requirements and general principles for the evaluation of biological safety within a risk management process▷ISO/AWI 10993-2 Biological evaluation of medical devices — Part 2: Animal welfare requirements▷ISO/AWI 10993-3 Biological evaluation of medical devices — Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity▷ISO 10993-4:2017/DAmd 1 Biological evaluation of medical devices — Part 4: Selection of tests for interactions with blood — Amendment 1▷ISO/CD 10993-6 Biological evaluation of medical devices — Part 6: Tests for local effects after implantation▷ISO/CD 10993-7.2 Biological evaluation of medical devices — Part 7: Ethylene oxide sterilization residuals▷ISO/CD 10993-11 Biological evaluation of medical devices — Part 11: Tests for systemic toxicity▷ISO 10993-12:2021/AWI Amd 1 Biological evaluation of medical devices — Part 12: Sample preparation and reference materials — Amendment 1▷ISO/AWI 10993-16 Biological evaluation of medical devices — Part 16: Toxicokinetic study design for degradation products and leachables▷ISO 10993-17:2023/AWI Amd 1 Biological evaluation of medical devices — Part 17: Toxicological risk assessment of medical device constituents — Amendment 1▷ISO 10993-23:2021/AWI Amd 1 Biological evaluation of medical devices — Part 23: Tests for irritation — Amendment 1▷ISO/CD 14155 Clinical investigation of medical devices for human subjects — Good clinical practice▷ISO/AWI 18969 Clinical evaluation of medical devices▷ISO/AWI 21762 Medical devices utilizing human tissues and their derivatives — Application of risk management▷ISO/AWI TR 24850 Sources of hazard information for medical device constituents
-
[특집-기술위원회] TC 190 - 토양 품질(Soil quality)… 준설된 수중 토양 물질(굴착된 퇴적물)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186, △1984년 TC 188등이 있다.ISO/TC 190 토양 품질(Soil quality)과 관련된 기술위원회는 TC 189와 마찬가지로 1985년 결성됐다. 사무국은 독일 표준화기구(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다.위원회는 테레사 게스바인(Mrs Theresa Geßwein)이 책임지고 있다. 현재 의장은 냇 클라우스 리파르트(Mr Dr. rer. nat Klaus Liphard)이다.ISO 기술 프로그램 관리자는 이사벨 베가(Ms Isabelle Vega), ISO 편집 관리자는 발레리아 아가멤논(Ms Valeria Agamennone)등으로 조사됐다.범위는 토양 품질 분야의 표준화다. 원지 토양(원래의 토양), 준설된 수중 토양 물질(굴착된 퇴적물)을 포함해 토양 내 또는 토양 위에서 재사용하기 위한 토양 물질 등도 포함된다.단 토양 품질 평가를 위한 임계값 또는 한계값이나 ISO/TC 182 지질공학에서 다루고 있는 토목공학적 측면이나 ISO/TC 147 수질에서 다루고 있는 현장 퇴적물 등은 제외한다.현재 ISO/TC 190 사무국과 관련해 발행된 표준은 198개며 ISO/TC 190 사무국의 직접적인 책임 하에 발행된 표준은 16개다.ISO/TC 190 사무국과 관련해 개발된 표준은 16개며 ISO/TC 190 사무국의 직접적인 책임 하에 개발 중인 표준은 4개다. 참여하고 있는 회원은 31개국, 참관 회원은 30개국이다.□ ISO/TC 190 사무국의 직접적인 책임 하에 발행된 표준 16개 목록▷ISO 4974:2023 Soil quality — Guidance on soil temperature measurement▷ISO 11074:2015 Soil quality — Vocabulary▷ISO 11074:2015/Amd 1:2020 Soil quality — Vocabulary — Amendment 1▷ISO 11275:2004 Soil quality — Determination of unsaturated hydraulic conductivity and water-retention characteristic — Wind's evaporation method▷ISO 15709:2002 Soil quality — Soil water and the unsaturated zone — Definitions, symbols and theory▷ISO 15903:2002 Soil quality — Format for recording soil and site information▷ISO 16586:2003 Soil quality — Determination of soil water content as a volume fraction on the basis of known dry bulk density — Gravimetric method▷ISO 16586:2003/Cor 1:2009 Soil quality — Determination of soil water content as a volume fraction on the basis of known dry bulk density — Gravimetric method — Technical Corrigendum 1▷ISO 17312:2005 Soil quality — Determination of hydraulic conductivity of saturated porous materials using a rigid-wall permeameter▷ISO 17313:2004 Soil quality — Determination of hydraulic conductivity of saturated porous materials using a flexible wall permeameter▷ISO 20951:2019 Soil Quality — Guidance on methods for measuring greenhouse gases (CO2, N2O, CH4) and ammonia (NH3) fluxes between soils and the atmosphere▷ISO 23400:2021 Guidelines for the determination of organic carbon and nitrogen stocks and their variations in mineral soils at field scale▷ISO 23992:2022 Soil quality — Framework for detailed recording and monitoring of changes in dynamic soil properties▷ISO 25177:2019 Soil quality — Field soil description▷ISO 28258:2013 Soil quality — Digital exchange of soil-related data▷ISO 28258:2013/Amd 1:2019 Soil quality — Digital exchange of soil-related data — Amendment 1□ ISO/TC 190 사무국의 직접적인 책임 하에 개발 중인 표준 4개 목록▷ISO/DIS 11074 Soil quality — Vocabulary▷ISO/CD 18718 Assessment of soil functions and related-ecosystem services: definitions and conceptual Framework▷ISO/CD 18721 Assessment of ecological soil functions: indicators and methods▷ISO/AWI 21251 Guidance for estimating organic carbon stocks in soils according to their biogeochemical stability or or residence time□ ISO/TC 190 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 190/SC 3 Chemical and physical characterization ; 발행된 표준 87개, 개발 중인 표준 13개▷ISO/TC 190/SC 4 Biological characterization ; 발행된 표준 56개, 개발 중인 표준 9개▷ISO/TC 190/SC 7 Impact assessment ; 발행된 표준 39개, 개발 중인 표준 4개
-
[특집-기술위원회] TC 188 - 소형선박(Small craft)… 선체 길이가 최대 24미터인 레저 선박 및 유사한 장비를 사용하는 기타 소형 선박스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186등이 있다.ISO/TC 188 소형선박(Small craft)과 관련된 기술위원회는 1984년 결성됐다. 사무국은 스웨덴 국립표준청(Svenska institutet för standarder, SIS)에서 맡고 있다.위원회는 아네트 에릭슨(Ms Anette Eriksson)이 책임지고 있다. 현재 의장은 크레이그 숄튼(Mr Craig Scholten)이며 임기는 2026년까지다.ISO 기술 프로그램 관리자는 메르세 페레 에르난데스(Mme Mercè Ferrés Hernández) ISO 편집 관리자는 니콜라 페루(Ms Nicola Perou) 등으로 조사됐다.범위는 선체 길이가 최대 24미터인 레저 선박 및 유사한 장비를 사용하는 기타 소형 선박의 장비 및 구조 세부 사항의 표준화다. 단, ISO/TC 8이 다루고 있는 구명정 및 구명 장비는 제외한다.현재 ISO/TC 188 사무국과 관련해 발행된 표준은 96개며 ISO/TC 188 사무국의 직접적인 책임 하에 발행된 표준은 82개다.ISO/TC 188 사무국과 관련해 개발 중인 표준은 16개며 ISO/TC 188 사무국의 직접적인 책임 하에 개발 중인 표준은 12개다. 참여하고 있는 회원은 22개국, 참관 회원은 23개국이다.□ ISO/TC 188 사무국의 직접적인 책임 하에 발행된 표준 82개 중 15개 목록▷ISO 4566:1992 Small craft with inboard engine — Propeller shaft ends and bosses with 1:10 taper▷ISO 6017:2024 Small craft — Automatic watertight ventilation shutdown system▷ISO 6185-1:2001 Inflatable boats — Part 1: Boats with a maximum motor power rating of 4,5 kW▷ISO 6185-2:2001 Inflatable boats — Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive▷ISO 6185-3:2014 Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater▷ISO 6185-4:2011 Inflatable boats — Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater▷ISO 7840:2021 Small craft — Fire-resistant fuel hoses▷ISO 8099-1:2018 Small craft — Waste systems — Part 1: Waste water retention▷ISO 8099-2:2020 Small craft — Waste systems — Part 2: Sewage treatment systems▷ISO 8469:2021 Small craft — Non-fire-resistant fuel hoses▷ISO 8665:2006 Small craft — Marine propulsion reciprocating internal combustion engines — Power measurements and declarations▷ISO 8666:2020 Small craft — Principal data▷ISO 8845:1994 Small craft with inboard engine — Propeller shaft ends and bosses with 1:16 taper▷ISO 8845:1994/Cor 1:1995 Small craft with inboard engine — Propeller shaft ends and bosses with 1:16 taper — Technical Corrigendum 1▷ISO 8846:1990 Small craft — Electrical devices — Protection against ignition of surrounding flammable gases□ ISO/TC 188 사무국의 직접적인 책임 하에 개발 중인 표준 12개 목록▷ISO/FDIS 6185-3 Inflatable boats — Part 3: Boats with a length of the hull less than 8 m with a motor power rating of 15 kW and greater▷ISO/FDIS 8665-2 Small craft — Power measurements and declarations — Part 2: Electric marine propulsion▷ISO/DIS 8846 Small craft — Electrical devices — Protection against ignition of surrounding flammable gases▷ISO/DIS 10239.2 Small craft — Liquefied petroleum gas (LPG) systems▷ISO 11812:2020/DAmd 1 Small craft — Watertight or quick-draining recesses and cockpits — Amendment 1▷ISO/CD 12215-9 Small craft — Hull construction and scantlings — Part 9: Sailing craft appendages▷ISO/AWI 12217-1 Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull length greater than or equal to 6 m▷ISO/AWI 12217-2 Small craft — Stability and buoyancy assessment and categorization — Part 2: Sailing boats of hull length greater than or equal to 6 m▷ISO/AWI 12217-3 Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m▷ISO/FDIS 15085 Small craft — Protection from falling overboard and means of reboarding▷ISO/DIS 16315 Small craft — Electrical systems used for electrical propulsion▷ISO/CD 23625 Small craft — Lithium-ion batteries□ ISO/TC 188 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 188/SC 1 Personal safety equipment ; 발행된 표준 14개, 개발 중인 표준 4개
-
[특집-기술위원회] TC 185 - 과도한 압력으로부터 보호하기 위한 안전장치(Safety devices for protection against excessive pressure)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 등이 있다.ISO/TC 185 과도한 압력으로부터 보호하기 위한 안전 장치(Safety devices for protection against excessive pressure)와 관련된 기술위원회는 TC 183, TC 184와 마찬가지로 1983년 결성됐다. 사무국은 미국 표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 콜린 로드리게스(Ms Colleen Rodrigues)가 책임지고 있으며 현재 의장은 위르겐 슈미트(Mr Prof. Dr.-Ing Jürgen Schmidt)이며 임기는 2024년까지다.ISO 기술 프로그램 관리자는 샐리 스윙우드(Ms Sally Swingewood), ISO 편집 관리자는 루시 커크(Ms Lucy Kirk) 등으로 조사됐다.범위는 과도한 내부 및 외부 압력으로부터 보호하기 위한 안전 장치 분야의 표준화다. 단 ISO/TC 138의 책임 하에 있는 주로 플라스틱으로 만들어진 밸브, ISO/TC 131의 책임 하에 있는 주로 유체 동력 시스템에 사용하도록 고안된 구성 요소들은 제외한다.현재 ISO/TC 185의 직접적인 책임 하에 발행된 표준은 12개며 ISO/TC 185의 직접적인 책임 하에 개발 중인 표준은 2개다. 참여하고 있는 회원은 13개국, 참관 회원은 22개국이다.□ ISO/TC 185 사무국의 직접적인 책임 하에 발행된 표준 12개 목록▷ISO 4126-1:2013 Safety devices for protection against excessive pressure — Part 1: Safety valves▷ISO 4126-1:2013/Amd 1:2016 Safety devices for protection against excessive pressure — Part 1: Safety valves — Amendment 1▷ISO 4126-2:2018 Safety devices for protection against excessive pressure — Part 2: Bursting disc safety devices▷ISO 4126-3:2020 Safety devices for protection against excessive pressure — Part 3: Safety valves and bursting disc safety devices in combination▷ISO 4126-4:2013 Safety devices for protection against excessive pressure — Part 4: Pilot operated safety valves▷ISO 4126-5:2013 Safety devices for protection against excessive pressure — Part 5: Controlled safety pressure relief systems (CSPRS)▷ISO 4126-5:2013/Amd 1:2016 Safety devices for protection against excessive pressure — Part 5: Controlled safety pressure relief systems (CSPRS) — Amendment 1▷ISO 4126-6:2014 Safety devices for protection against excessive pressure — Part 6: Application, selection and installation of bursting disc safety devices▷ISO 4126-7:2013 Safety devices for protection against excessive pressure — Part 7: Common data▷ISO 4126-7:2013/Amd 1:2016 Safety devices for protection against excessive pressure — Part 7: Common data — Amendment 1▷ISO 4126-9:2008 Safety devices for protection against excessive pressure — Part 9: Application and installation of safety devices excluding stand-alone bursting disc safety devices▷ISO 4126-10:2010 Safety devices for protection against excessive pressure — Part 10: Sizing of safety valves for gas/liquid two-phase flow□ ISO/TC 185 사무국의 직접적인 책임 하에 개발 중인 표준 2개 목록▷ISO 4126-10 Safety devices for protection against excessive pressure — Part 10: Sizing of safety valves and bursting discs for gas/liquid two-phase flow▷ISO/AWI 4126-11 Safety devices for protection against excessive pressure — Part 11: Performance Testing
-
KTR, 태국 소방 및 건축자재 현지 기관과 업무협약 체결태국 소방 및 건축자재 기술 교류가 활발히 이뤄질 전망이다. KTR(한국화학융합시험연구원)이 태국 소방 및 건축자재 진출 기업을 돕기 위해 현지 기관과 업무협약을 체결했다고 2일 밝혔다. 김현철 KTR 원장은 2일 태국 방콕에서 태국 건물 검사 협회 BSA(Building Inspectors Association) 피차야 찬트라누왓(Dr. Pichaya Chantranuwat) 대표와 소방 건축자재 제품 검사 및 인증 분야 기술 협력을 내용으로 업무협약을 체결했다. BSA는 태국 소방 및 건축자재 제품 검사기관으로 내진 구조물, 초고층 건물 등에 대한 안전 진단 및 인증 업무를 수행하고 있다. 이번 협약으로 태국 건축 소방분야 시장 진출 또는 태국 내 건축을 준비하고 있는 기업은 KTR을 통해 건물 시공에 필요한 소방 기술 가이드 검토와 소방 및 건축자재 현지 검사 대행 등이 가능하다. 이를 통해 태국 소방시설 인허가 등 규제에 빠르게 대응할 수 있다. 양 기관은 또 건축물 관련 탄소중립, 에너지효율 등 기술규제 대응 분야에서도 협력하기로 합의했다. 김현철 KTR 원장은 “태국은 아세안 2위 경제 대국이자 한국과의 교역 또한 지속적으로 늘고 있는 중요한 시장”이라며 “앞으로 현지 협력기관 확대 등 태국 진출기업 지원을 위한 활동을 더욱 활발히 벌일 것”이라고 밝혔다. 한편 KTR은 지난해 말레이시아 시험인증기관인 SIRIM과 소방방재분야 상호업무협약을 체결하는 등 국내 소방 방재 관련 기업의 동남아 시장 진출 확대를 위해 적극 나서고 있다.
-
[특집-기술위원회] TC 182 - 지반공학(Geotechnics)… 토양 및 암석의 특성을 포함해 건축 및 토목 공학 분야의 지반 공학적 측면의 표준화스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 등이 있다.ISO/TC 182 지반공학(Geotechnics)과 관련된 기술위원회는 1981년 결성됐다. 사무국은 영국 표준협회(British Standards Institution, BSI)에서 맡고 있다.위원회는 디드레 푸리(Miss Deidre Fourie)가 책임지고 있으며 현재 의장은 존 파웰(Mr John Powell)이다. ISO 기술 프로그램 관리자는 안나 카테리나 로시(Dr Anna Caterina Rossi), ISO 편집 관리자는 앤 기엣(Ms Anne Guiet) 등으로 조사됐다.범위는 토양 및 암석의 (관련) 특성을 포함해 건축 및 토목 공학 분야의 지반 공학적 측면의 표준화다.현재 ISO/TC 182 사무국의 직접적인 책임 하에 발행된 표준은 58개며 ISO/TC 182 사무국의 직접적인 책임 하에 개발 중인 표준은 6개다. 참여하고 있는 회원은 25개국, 참관 회원은 31개국이다.□ ISO/TC 182 사무국의 직접적인 책임 하에 발행된 표준 58개 중 15개 목록▷ISO 14688-1:2017 Geotechnical investigation and testing — Identification and classification of soil — Part 1: Identification and description▷ISO 14688-2:2017 Geotechnical investigation and testing — Identification and classification of soil — Part 2: Principles for a classification▷ISO 14689:2017 Geotechnical investigation and testing — Identification, description and classification of rock▷ISO 17628:2015 Geotechnical investigation and testing — Geothermal testing — Determination of thermal conductivity of soil and rock using a borehole heat exchanger▷ISO 17892-1:2014 Geotechnical investigation and testing — Laboratory testing of soil — Part 1: Determination of water content▷ISO 17892-1:2014/Amd 1:2022 Geotechnical investigation and testing — Laboratory testing of soil — Part 1: Determination of water content — Amendment 1▷ISO 17892-2:2014 Geotechnical investigation and testing — Laboratory testing of soil — Part 2: Determination of bulk density▷ISO 17892-3:2015 Geotechnical investigation and testing — Laboratory testing of soil — Part 3: Determination of particle density▷ISO 17892-4:2016 Geotechnical investigation and testing — Laboratory testing of soil — Part 4: Determination of particle size distribution▷ISO 17892-5:2017 Geotechnical investigation and testing — Laboratory testing of soil — Part 5: Incremental loading oedometer test▷ISO 17892-6:2017 Geotechnical investigation and testing — Laboratory testing of soil — Part 6: Fall cone test▷ISO 17892-7:2017 Geotechnical investigation and testing — Laboratory testing of soil — Part 7: Unconfined compression test▷ISO 17892-8:2018 Geotechnical investigation and testing — Laboratory testing of soil — Part 8: Unconsolidated undrained triaxial test▷ISO 17892-9:2018 Geotechnical investigation and testing — Laboratory testing of soil — Part 9: Consolidated triaxial compression tests on water saturated soils▷ISO 17892-10:2018 Geotechnical investigation and testing — Laboratory testing of soil — Part 10: Direct shear tests□ ISO/TC 182 사무국의 직접적인 책임 하에 개발 중인 표준 6개 목록▷ISO/AWI 16383-1 Geotechnical investigation and testing — Laboratory testing of rock — Part 1: Determination of water content▷ISO/AWI 16383-2 Geotechnical investigation and testing — Laboratory testing of rock — Part 2: Determination of bulk density▷ISO/DIS 18674-7 Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — Part 7: Measurement of strains: Strain gauges▷ISO/AWI 18674-9 Geotechnical investigation and testing -Geotechnical monitoring by field instrumentation — Part 9: Measurement of displacements by geodetic means▷ISO 22476-16 Geotechnical investigation and testing — Field testing — Part 16: Borehole shear test▷ISO/WD 22477-6 Geotechnical investigation and testing — Testing of geotechnical structures — Part 6: Load testing of soil nails and rock bolts