검색결과
-
[특집-ISO/IEC JTC 1/SC 17 활동] ⑦ISO/TMB Communique_ Issue Nr. 75 (October 2023) 소개지난 10월3일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'ISO/TMB Communique_ Issue Nr. 75 (October 2023)' 관련 문서 v.0.1을 배포했으며 10월 16일 v.0.2를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안 장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서는 'ISO/TMB Communique_ Issue Nr. 75 (October 2023)'은 기술관리위원회(Technical Management Board, TMB)의 동향보고서 v.0.2다. TMB 동향보고서는 목차는 다음과 같이 구성됐다.ContentsTMB COMMUNIQUEHighlights from the September 2023 TMB meeting 1. New ISO/IEC JTC 1/SC 44 on Information Technology for Smart Cities 2. New TC on Data-Driven Agrifood Systems integrating the TS/P on Integrated Pest Management (IPM) for Crops 3. New PC on Sustainable raw materials & new IWA on Sustainable critical mineral supply chains 4. Re-activation of ISO/PC 302 Guidelines for Auditing Management SystemsNews 5. Improved Development Processes – Optimized Deliverables 6. TMB London Declaration Action Plan 7. L.D. Eicher Award 2023 Winner 8. ISO Open Consultation 9. Committee Strategy Management – Update 10. E-learning module available for ISO Guide 84Reminders 11. Guidance on gender responsive standards (GRS)New CommitteesTMB Resolutions
-
효율성 높이는 연구개발(R&D) 투자 혁신방안 마련한다산업통상자원부(이하 산업부)가 연구개발(R&D) 투자 성과를 향상시키기 위한 혁신 방안을 마련하는데 주력을 다하고 있다. 장영진 1차관은 주요 기업 최고기술책임자(CTO, Chief Technology Officer)들을 모아 간담회를 개최했다. 이 곳에서 내년 R&D 예산 개혁안과 제도 혁신 방향에 대한 설명을 진행하고 기업 의견을 청취했다. 특히, 지난 20년간 정부의 R&D 투자가 세계 2위에 달하더라도 성과가 부족하다는 지적을 언급했다. 더불어 경제협력개발기구(OECD)의 ‘한국 혁신정책 검토’에서 혁신성 부족이 언급된 사실을 설명했다. 이러한 상황에서 장영진 1차관은 앞으로 연구개발(R&D) 투자를 재조정하겠다고 밝혔다. 구체적으로 “기업에 대한 소규모 뿌려주기식 투자와 개별 쟁점에 따른 분절적 사업 등을 축소하고, 생태계 융합을 촉진할 수 있는 임무 지향적 대형 프로그램이 필요하다.”고 언급했다. 산업부는 연구개발에 대한 혁신방안 마련을 통해 투자의 효율성을 적극 향상시킬 예정이다. 이를 통해 기업과 정부간 협력이 강화되고 R&D 분야에서 성과를 높이는 데 큰 기여를 할 것으로 보인다.
-
[특집-기술위원회] TC 130 - 그래픽 기술(Graphic technology)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 등이다.△1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111, △1964년 TC 112~TC 115, TC 117, △1965년 TC 118, △1966년 TC 119~TC 122, △1967년 TC 123, △1968년 TC 126, TC 127 등도 포함된다.ISO/TC 130 그래픽 기술(Graphic technology)과 관련된 기술위원회는 1969년 결성됐다. 사무국은 중국 국가표준화관리위원(国家标准化管理委员会, Standardization Administration of China, SAC)에서 맡고 있다.위원회는 메이팡 리(Ms Meifang Li)가 책임지고 있다. 현재 의장은 펑페이 짜오(Mr Pengfei Zhao)로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 블란딘 가르시아(Mme Blandine Garcia), ISO 편집 관리자는 마사 카산토산(Mrs Martha Casantosan) 등으로 조사됐다.범위는 인쇄 및 그래픽 기술 분야의 표준화를 다루고 있다. 이 분야는 그래픽 요소(이미지, 텍스트, 라인 아트, 패턴 등)가 생성, 조작, 조립, 전달되고 최종적으로 디지털 제품으로 전자적으로 전달되거나 잉크, 토너 및 기타를 사용해 물리적으로 기판에 전달되는 프로세스의 모든 단계를 다룬다. 마킹 또는 기능성 재료를 생산하고 최종 응용 분야의 요구에 따라 마감 처리된다.ISO/TC 130 표준에는 용어, 시각적 외관 및 제품 품질 평가, 데이터 교환, 프로세스 제어, 관리, 적합성 평가, 환경에 대한 영향 등이 포함되지만 이에 국한되지는 않는다. 뿐만 아니라 관련 재료, 장비 및 시스템에 대한 요구 사항 및 테스트도 수용한다.참고로 ISO/TC 42, TC 6, TC 256, TC 35, IEC/TC 100 및 ISO/IEC JTC 1/SC 28과 같은 다른 TC/SC와 범위가 실제 또는 잠재적으로 중복되는 경우 관련 TC와의 연락 또는 JWG를 통한 조정은 유지되거나 적극적으로 추진돼야 한다.현재 ISO/TC 130 사무국과 관련해 발행된 표준은 115개며 ISO/TC 130 사무국과 관련해 개발 중인 표준은 15개다. 참여하고 있는 회원은 21개국, 참관 회원은 22개국이다.□ ISO/TC 130 사무국 분과위원회(Subcommittee)의 책임 하에 발행된 표준 115개 중 15개 목록▷ISO 2834-1:2020 Graphic technology — Laboratory preparation of test prints — Part 1: Paste inks▷ISO 2834-2:2022 Graphic technology — Laboratory preparation of test prints — Part 2: Liquid printing inks▷ISO 2834-3:2008 Graphic technology — Laboratory preparation of test prints — Part 3: Screen printing inks▷ISO 2836:2021 Graphic technology — Prints and printing inks — Assessment of resistance of prints to various agents▷ISO 2846-1:2017 Graphic technology — Colour and transparency of printing ink sets for four-colour printing — Part 1: Sheet-fed and heat-set web offset lithographic printing▷ISO 2846-2:2007 Graphic technology — Colour and transparency of printing ink sets for four-colour printing — Part 2: Coldset offset lithographic printing▷ISO 5776:2022 Graphic technology — Symbols for text proof correction▷ISO/TS 10128:2009 Graphic technology — Methods of adjustment of the colour reproduction of a printing system to match a set of characterization data▷ISO 11084-1:1993 Graphic technology — Register systems for photographic materials, foils and paper — Part 1: Three-pin systems▷ISO 11084-2:2006 Graphic technology — Register systems for photographic materials, foils and paper — Part 2: Register pin systems for plate making▷ISO 12040:1997 Graphic technology — Prints and printing inks — Assessment of light fastness using filtered xenon arc light▷ISO 12218:1997 Graphic technology — Process control — Offset platemaking▷ISO 12632:2015 Graphic technology — Ink, paper and labels — Requirements on hot alkali penetration and resistance▷ISO 12634:2017 Graphic technology — Determination of tack of paste inks and vehicles by a rotary tackmeter▷ISO 12635:2021 Graphic technology — Plates for offset printing — Dimensions□ ISO/TC 130 사무국 분과위원회(Subcommittee)의 책임 하에 개발 중인 표준 15개 목록▷ISO/DTS 10128 Graphic technology — Methods of adjustment of the colour reproduction of a printing system to match a set of characterization data▷ISO/DIS 12641-1 Graphic technology — Prepress digital data exchange — Colour targets for input scanner calibration — Part 1: Colour targets for input scanner calibration▷ISO/FDIS 12643-1.2 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements▷ISO/FDIS 12643-2.2 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 2: Prepress and press equipment and systems▷ISO/FDIS 12643-3 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 3: Binding and finishing equipment and systems▷ISO/FDIS 12643-4 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 4: Converting equipment and systems▷ISO/FDIS 12643-5 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 5: Manually-fed stand-alone platen presses▷ISO/DIS 12647-2 Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 2: Offset lithographic processes▷ISO/AWI 15076-2 Image technology colour management — Architecture, profile format and data structure — Part 2: Based on ICC.1:2022▷ISO/DIS 15339-1 Graphic technology — Printing from digital data across multiple technologies — Part 1: Principles▷ISO/AWI TS 18621-22 Graphic technology — Image quality evaluation methods for printed matter — Part 22: Evaluation of colour graininess▷ISO/DTS 18621-31 Graphic technology — Image quality evaluation methods for printed matter — Part 31: Evaluation of the perceived resolution of printing systems with the Contrast–Resolution chart▷ISO/AWI 19307 Graphic Technology — Measurement and one-parameter representation of translucency▷ISO/CD TR 23805 Graphic technology — Dry back calculation for offset printing process▷ISO/FDIS 24487 Graphic technology — Processless lithographic plates — Evaluation methods for characteristics and performance□ ISO/TC 130 사무국의 작업그룹(Working Group, WG) 현황▷ISO/TC 130/JWG 7 Joint TC 130 - ICC WG: colour management▷ISO/TC 130/JWG 14 Joint TC 130 - TC 42 - ISO/IEC JTC 1/SC 28 WG: Print quality measurement methods▷ISO/TC 130/TF 3 Communications▷ISO/TC 130/WG 1 Terminology▷ISO/TC 130/WG 2 Prepress data exchange▷ISO/TC 130/WG 3 Process control and related metrology▷ISO/TC 130/WG 4 Media and materials▷ISO/TC 130/WG 5 Ergonomics - Safety▷ISO/TC 130/WG 10 Management of security printing processes▷ISO/TC 130/WG 11 Environmental impact of graphic technology▷ISO/TC 130/WG 12 Postpress
-
[특집-기술위원회] TC 122 - 포장(Packaging)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 등이다.△1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111, △1964년 TC 112~TC 115, TC 117, △1965년 TC 118 등도 포함된다.ISO/TC 122 포장(Packaging)와 관련된 기술위원회는 TC 119, TC 120, TC 121과 마찬가지로 1966년에 결성됐다. 사무국은 일본산업표준조사회(日本産業標準調査会, Japanese Industrial Standards Committee, JISC)에서 맡고 있다.위원회는 아키라 시라쿠라(Mr Akira Shirakura)가 책임지고 있다. 현재 의장은 다케오 시이나(Dr Takeo Shiina)로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 모니카 이비도(Ms Monica Ibido), ISO 편집 관리자는 앤 기엣(Ms Anne Guiet) 등으로 조사됐다. 범위는 용어 및 정의, 특성, 성능 요구 사항 및 테스트와 관련된 포장 분야 및 포장 관련 기술의 활용 등에 관한 표준화다. 단, TC 6, TC 52, TC 104 등 특정 위원회 범위내에 속하는 문제들은 제외된다.현재 ISO/TC 122 사무국과 관련해 발행된 표준은 88개며 이중 직접적인 책임 하에 개발된 표준은 46개다. ISO/TC 122 사무국과 관련해 개발중인 표준은 11개며 직접적인 책임 하에 개발 중인 표준은 4개다. 참여하고 있는 회원은 31개국, 참관 회원은 48개국이다.□ ISO/TC 122 사무국의 직접적인 책임 하에 발행된 표준 46개 중 15개 목록▷ISO 780:2015 Packaging — Distribution packaging — Graphical symbols for handling and storage of packages▷ISO 3394:2012 Packaging — Complete, filled transport packages and unit loads — Dimensions of rigid rectangular packages▷ISO 3676:2012 Packaging — Complete, filled transport packages and unit loads — Unit load dimensions▷ISO 4178:1980 Complete, filled transport packages — Distribution trials — Information to be recorded▷ISO 6590-2:1986 Packaging — Sacks — Vocabulary and types — Part 2: Sacks made from thermoplastic flexible film▷ISO 6591-2:1985 Packaging — Sacks — Description and method of measurement — Part 2: Empty sacks made from thermoplastic flexible film▷ISO 7023:1983 Packaging — Sacks — Method of sampling empty sacks for testing▷ISO 7965-1:1984 Packaging — Sacks — Drop test — Part 1: Paper sacks▷ISO 7965-2:1993 Sacks — Drop test — Part 2: Sacks made from thermoplastic flexible film▷ISO 8351-2:1994 Packaging — Method of specification for sacks — Part 2: Sacks made from thermoplastic flexible film▷ISO 8367-2:1993 Packaging — Dimensional tolerances for general purpose sacks — Part 2: Sacks made from thermoplastic flexible film▷ISO 11156:2011 Packaging — Accessible design — General requirements▷ISO 11683:1997 Packaging — Tactile warnings of danger — Requirements▷ISO 11897:1999 Packaging — Sacks made from thermoplastic flexible film — Tear propagation on edge folds▷ISO 15119:2000 Packaging — Sacks — Determination of the friction of filled sacks□ ISO/TC 122 사무국의 직접적인 책임 하에 개발 중인 표준 4개 목록▷ISO/DIS 6608-1 Active and intelligent packaging — Part 1: General requirements and specifications of active packaging▷ISO/AWI TS 18617 Hand Hole Design Principles and Test Mehthods for Handheld Packages▷ISO/AWI 22742 Packaging — Linear bar code and two-dimensional symbols for product packaging▷ISO/AWI 28219 Packaging — Labelling and direct product marking with linear bar code and two-dimensional symbols□ ISO/TC 122 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 122/SC 3 Performance requirements and tests for means of packaging, packages and unit loads (as required by ISO/TC 122) ; 발행된 표준 32개, 개발 중인 표준 5개▷ISO/TC 122/SC 4 Packaging and the environment ; 발행된 표준 10개, 개발 중인 표준 2개□ ISO/TC 121 사무국 작업그룹(Working Group, WG)의 활동 현황▷ISO/TC 122/WG 5 Terminology and vocabulary▷ISO/TC 122/WG 9 Accessible design for packaging▷ISO/TC 122/WG 12 Supply chain applications of logistics technology▷ISO/TC 122/WG 16 Temperature controlled product packaging▷ISO/TC 122/WG 18 Active and intelligent packaging
-
[특집-공동기술위원회] ⑥ISO/IEC JTC 1/SC 7 소프트웨어 및 시스템 엔지니어링(Software and systems engineering) - 워킹그룹(WG) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(Working Group, WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등을 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.또한 국제전기기술위원회(International Electro-technical Commission, IEC)는 전기 및 전자 제품의 고품질 인프라와 국제 무역을 뒷받침하는 글로벌 비영리 회원 조직이다.기술 혁신, 저렴한 인프라 개발, 효율적이고 지속 가능한 에너지 접근, 스마트 도시화 및 교통 시스템, 기후 변화 완화를 촉진하고 사람과 환경의 안전을 향상시키는 역할을 수행하고 있다. 170개 이상의 국가를 통합하고 전 세계 약 2만 명의 전문가에게 글로벌하고 중립적이며 독립적인 표준화 플랫폼을 제공하고 있다. 장치, 시스템, 설치, 서비스 및 인력이 필요에 따라 작동함을 구성원이 인증하는 4가지 적합성 평가 시스템을 관리한다.적합성 평가와 함께 정부가 국가 품질 인프라를 구축하고 모든 규모의 기업이 전 세계 대부분의 국가에서 일관되게 안전하고 신뢰할 수 있는 제품을 사고 팔 수 있도록 하는 기술 프레임워크를 제공하는 약 1만개의 IEC 국제표준을 발행하고 있다.이러한 ISO와 IEC가 공동으로 구성한 기술위원회 ISO/IEC JTC 1 정보 기술(Information technology)에 대해 살펴볼 예정이다. JTC 1은 1987년 결성됐으며 사무국은 미국국립표준협회(American National Standards Institute, ANSI)에서 맡고 있다. 위원회는 리사 라지첼(Mrs Lisa Rajchel)가 책임지고 있다. 현재 의장은 필 웬블롬(Mr Phil Wennblom)으로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), 스티븐 더트널(Mr Stephen Dutnall), ISO 편집 관리자는 앨리슨 레이드 자몬드(Ms Alison Reid-Jamond) 등으로 조사됐다. 범위는 정보기술 분야의 표준화다.현재 ISO/IEC JTC 1의 직접적인 책임 하에 발행된 표준은 517개며 직접적인 책임 하에 개발중인 표준은 23개다. 참여하고 있는 회원은 40개국, 참관 회원은 62개국이다.공동 기술위원회(Joint Technical Committee, JTC) 산하에서 활동하고 있는 분과위원회(Subcommittee, SC) 중 SC 1, SC 2, SC 6에 이어 SC 7에 대해 살펴보면 다음과 같다.ISO/IEC JTC 1/SC 7 소프트웨어 및 시스템 엔지니어링(Software and systems engineering)과 관련된 분과위원회는 1987년 결성됐다. 사무국은 인도 표준국(Bureau of Indian Standards, BIS)에서 맡고 있다.위원회는 레나 가르그(Ms Reena Garg)이 책임지고 있다. 현재 의장은 선딥 오베로이(Dr Sundeep Oberoi)으로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), ISO 편집 관리자는 이본느 헨(Mrs Yvonne Chen) 등으로 조사됐다.범위는 소프트웨어 제품 및 시스템 엔지니어링을 위한 프로세스, 지원 도구 및 지원 기술의 표준화다. 참고로 프로세스, 도구 및 기술은 JTC 1 참조 약관의 범위 내에 있으며 JTC 1이 다른 SC에 할당한 특정 도구 및 기술은 제외된다.현재 ISO/IEC JTC 1/SC 7 사무국의 직접적인 책임 하에 발행된 표준은 212개며 개발 중인 표준은 41개다. 참여하고 있는 회원은 37개국, 참관 회원은 24개국이다.□ ISO/IEC JTC 1/SC 7 사무국내 작업그룹(Working Group, WG) 목록▷ISO/IEC JTC 1/SC 7/AG 1 Chair’s Advisory Group Working group▷ISO/IEC JTC 1/SC 7/AG 2 Business planning group Working group▷ISO/IEC JTC 1/SC 7/AG 3 Communications and outreach Working group▷ISO/IEC JTC 1/SC 7/AG 4 Standards management Working group▷ISO/IEC JTC 1/SC 7/AG 5 Architecture and future watch Working group▷ISO/IEC JTC 1/SC 7/AHG 6 Digital engineering Working group▷ISO/IEC JTC 1/SC 7/AHG 7 Open source software Working group▷ISO/IEC JTC 1/SC 7/AHG 9 AI-based software development Working group▷ISO/IEC JTC 1/SC 7/AHG 10 Green software Working group▷ISO/IEC JTC 1/SC 7/JWG 28 Joint ISO/IEC JTC 1/SC 7 - ISO/TC 159/SC 4 WG: Common industry formats for usability-related information Working group▷ISO/IEC JTC 1/SC 7/WG 2 System software documentation Working group▷ISO/IEC JTC 1/SC 7/WG 4 Tools and environment Working group▷ISO/IEC JTC 1/SC 7/WG 6 Software Product and System Quality Working group▷ISO/IEC JTC 1/SC 7/WG 7 Life cycle management Working group▷ISO/IEC JTC 1/SC 7/WG 10 Process assessment Working group▷ISO/IEC JTC 1/SC 7/WG 19 Techniques for Specifying IT Systems Working group▷ISO/IEC JTC 1/SC 7/WG 20 Software and systems bodies of knowledge and professionalization Working group▷ISO/IEC JTC 1/SC 7/WG 21 Information technology asset management Working group▷ISO/IEC JTC 1/SC 7/WG 22 Vocabulary validation Working group▷ISO/IEC JTC 1/SC 7/WG 24 Systems and software standards for Very Small Entities Working group▷ISO/IEC JTC 1/SC 7/WG 26 Software testing Working group▷ISO/IEC JTC 1/SC 7/WG 29 Agile and DevOps Working group▷ISO/IEC JTC 1/SC 7/WG 30 Systems resilience Working group▷ISO/IEC JTC 1/SC 7/WG 42 Architecture Working group□ 다른 위원회의 책임하에 있는 공동 작업그룹 목록▷ISO/IEC JTC 1/SC 42/JWG 2 Joint Working Group ISO/IEC JTC1/SC 42 - ISO/IEC JTC1/SC 7 : Testing of AI-based systems▷ISO/TC 159/SC 4/JWG 28 Joint ISO/TC 159/SC 4 - ISO/IEC JTC 1/SC 7 WG: Common industry formats for usability related information
-
[특집-공동기술위원회] ⑥ISO/IEC JTC 1/SC 7 소프트웨어 및 시스템 엔지니어링(Software and systems engineering) 소개 - 1스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(Working Group, WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등을 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.또한 국제전기기술위원회(International Electro-technical Commission, IEC)는 전기 및 전자 제품의 고품질 인프라와 국제 무역을 뒷받침하는 글로벌 비영리 회원조직이다.기술 혁신, 저렴한 인프라 개발, 효율적이고 지속 가능한 에너지 접근, 스마트 도시화 및 교통 시스템, 기후 변화 완화를 촉진하고 사람과 환경의 안전을 향상시키는 역할을 수행하고 있다. 170개 이상의 국가를 통합하고 전 세계 2만 명의 전문가에게 글로벌하고 중립적이며 독립적인 표준화 플랫폼을 제공한다. 장치, 시스템, 설치, 서비스 및 인력이 필요에 따라 작동함을 구성원이 인증하는 4가지 적합성 평가 시스템을 관리한다.적합성 평가와 함께 정부가 국가 품질 인프라를 구축한다. 모든 규모의 기업이 전 세계 대부분의 국가에서 일관되게 안전하고 신뢰할 수 있는 제품을 사고 팔 수 있도록 하는 기술 프레임워크를 제공하는 약 1만개의 IEC 국제표준을 발행하고 있다.이러한 ISO와 IEC가 공동으로 구성한 기술위원회 ISO/IEC JTC 1 정보 기술(Information technology)에 대해 살펴볼 예정이다. JTC 1은 1987년 결성됐으며 사무국은 미국국립표준협회(American National Standards Institute, ANSI)에서 맡고 있다. 위원회는 리사 라지첼(Mrs Lisa Rajchel)가 책임지고 있다. 현재 의장은 필 웬블롬(Mr Phil Wennblom)으로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), 스티븐 더트널(Mr Stephen Dutnall), ISO 편집 관리자는 앨리슨 레이드 자몬드(Ms Alison Reid-Jamond) 등으로 조사됐다. 범위는 정보기술 분야의 표준화다.현재 ISO/IEC JTC 1의 직접적인 책임 하에 발행된 표준은 517개며 직접적인 책임 하에 개발 중인 표준은 23개다. 참여하고 있는 회원은 40개국, 참관 회원은 62개국이다.공동 기술위원회(Joint Technical Committee, JTC) 산하에서 활동하고 있는 분과위원회(Subcommittee, SC) 중 SC 1, SC 2, SC 6에 이어 SC 7에 대해 살펴보면 다음과 같다.ISO/IEC JTC 1/SC 7 소프트웨어 및 시스템 엔지니어링(Software and systems engineering)과 관련된 분과위원회는 1987년 결성됐다. 사무국은 인도 표준국(Bureau of Indian Standards, BIS)에서 맡고 있다.위원회는 레나 가르그(Ms Reena Garg)이 책임지고 있다. 현재 의장은 선딥 오베로이(Dr Sundeep Oberoi)으로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), ISO 편집 관리자는 이본느 헨(Mrs Yvonne Chen) 등으로 조사됐다.범위는 소프트웨어 제품 및 시스템 엔지니어링을 위한 프로세스, 지원 도구 및 지원 기술의 표준화다. 참고로 프로세스, 도구 및 기술은 JTC 1 참조 약관의 범위 내에 있으며 JTC 1이 다른 SC에 할당한 특정 도구 및 기술은 제외된다.현재 ISO/IEC JTC 1/SC 7 사무국의 직접적인 책임 하에 발행된 표준은 212개며 개발 중인 표준은 41개다. 참여하고 있는 회원은 37개국, 참관 회원은 24개국이다.□ ISO/IEC JTC 1/SC 7 사무국의 직접적인 책임하에 발행된 표준 및(또는) 프로젝트 212개 중 15개 목록▷ISO 5806:1984 Information processing — Specification of single-hit decision tables▷ISO 5807:1985 Information processing — Documentation symbols and conventions for data, program and system flowcharts, program network charts and system resources charts▷ISO/IEC TR 7052:2023 Software engineering — Controlling frequently occurring risks during development and maintenance of custom software▷ISO/IEC 8631:1989 Information technology — Program constructs and conventions for their representation▷ISO 8790:1987 Information processing systems — Computer system configuration diagram symbols and conventions▷ISO 8807:1989 Information processing systems — Open Systems Interconnection — LOTOS — A formal description technique based on the temporal ordering of observational behaviour▷ISO/IEC TR 10000-1:1998 Information technology — Framework and taxonomy of International Standardized Profiles — Part 1: General principles and documentation framework▷ISO/IEC 10746-1:1998 Information technology — Open Distributed Processing — Reference model: Overview — Part 1:▷ISO/IEC 10746-2:2009 Information technology — Open distributed processing — Reference model: Foundations — Part 2:▷ISO/IEC 10746-3:2009 Information technology — Open distributed processing — Reference model: Architecture — Part 3:▷ISO/IEC 10746-4:1998 Information technology — Open Distributed Processing — Reference Model: Architectural semantics — Part 4:▷ISO/IEC 10746-4:1998/Amd 1:2001 Information technology — Open Distributed Processing — Reference Model: Architectural semantics — Part 4: — Amendment 1: Computational formalization▷ISO/IEC 11411:1995 Information technology — Representation for human communication of state transition of software▷ISO/IEC TR 12182:2015 Systems and software engineering — Framework for categorization of IT systems and software, and guide for applying it▷ISO/IEC/IEEE 12207-2:2020 Systems and software engineering — Software life cycle processes — Part 2: Relation and mapping between ISO/IEC/IEEE 12207:2017 and ISO/IEC 12207:2008□ ISO/IEC JTC 1/SC 7 사무국의 직접적인 책임하에 개발중인 표준 및(또는) 프로젝트 41개 중 15개 목록▷ISO/IEC CD 9837-1 Software and systems engineering — Systems resilience — Part 1: Concepts and vocabulary▷ISO/IEC/IEEE 15026-3 Systems and software engineering — Systems and software assurance — Part 3: System integrity levels▷ISO/IEC CD 19770-5 Information technology — IT asset management — Part 5: Overview and vocabulary▷ISO/IEC PRF 19770-6 Information technology — IT asset management — Part 6: Hardware identification tag▷ISO/IEC CD TS 19770-10 Information technology — IT asset management — Part 10: Guidance for implementing ITAM▷ISO/IEC CD 20582 Software and systems engineering — Capabilities of build and deployment tools▷ISO/IEC AWI TR 24586-1 Software and systems engineering — Agile and DevOps principles and practices — Part 1: Agile principles and practices▷ISO/IEC AWI TR 24586-2 Software and systems engineering — Agile and DevOps principles and practices — Part 2: DevOps principles and practices▷ISO/IEC/IEEE FDIS 24748-1 Systems and software engineering — Life cycle management — Part 1: Guidelines for life cycle management▷ISO/IEC/IEEE FDIS 24748-2 Systems and software engineering — Life cycle management — Part 2: Guidelines for the application of ISO/IEC/IEEE 15288 (System life cycle processes)▷ISO/IEC DIS 24773-2 Software and systems engineering — Certification of software and systems engineering professionals — Part 2: Guidance regarding description of knowledge, skills, and competencies contained in schemes▷ISO/IEC DIS 25002 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Quality models overview and usage▷ISO/IEC FDIS 25010 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Product quality model▷ISO/IEC PRF 25019 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Quality-in-use model▷ISO/IEC DIS 25040 Systems and software engineering – Systems and software Quality Requirements and Evaluation (SQuaRE) – Quality evaluation framework
-
[기획-디지털 ID 표준] ⑧국가 표준화 기관 및 전문 기관 소개디지털 ID(Digital Identity) 분야에서 상호운용(interoperable)이 가능하고 안전한 서비스 보장을 위한 표준에 대한 수요가 증가하고 있다. 다양한 표준 조직 및 산업 기관이 활동하는 이유다.디지털 ID 표준을 개발하는 곳은 유럽표준화기구(European Standardisation Organistions), 국제표준화기구(International Standardisation Organisations), 상업 포럼 및 컨소시엄, 국가기관 등 다양하다.국가 표준화 기구 및 전문 기관(National standardisation bodies and specialised agencies)을 살펴보면 다음과 같다.먼저 미국 상무부(US Department of Commerce, DoC) 산하 국립표준기술연구소(National Institute of Standards and Technology, NIST) 내 6개의 연구소가 있다.이중 정보기술연구소(Information Technology Laboratory, ITL)는 7개 부서로 구성돼 있다. 응용 사이버보안부서(Applied Cybersecurity Division)와 컴퓨터 보안부서(Computer Security Division)는 사이버보안 표준과 지침을 개발하고 있다.NIST 표준 및 지침은 웹사이트를 통해 무료로 사용할 수 있다. ITL은 SP 800-63 디지털 ID 지침(Digital Identity Guidelines) 통합 문서를 발행했다.이 통합 문서에는 SP 800-63A Enrollment and identity proofing, SP 800-63B Authentication and lifecycle management, SP 800-63C Federation and assertions 등이 포함됐다.FIPS PUB 140-3 암호화 모듈에 대한 보안 요구사항(Security requirements for cryptographic modules)은 민감한 정보를 보호하는 보안 시스템 내 활용되는 암호화 모듈에 대한 보안 요구사항을 지정한다.프랑스 국가 사이버보안국(Agence nationale de la sécurité des systèmes d'information, ANSSI)은 신뢰 서비스 및 디지털 ID에 대한 표준화 프로세스에 참여해 왔다. ANSSI가 발행 및 발행 예정인 표준은 다음과 같다.△관련 ETSI 표준을 기반으로 한 신뢰 서비스 △원격 신원 증명(원격 신원 확인 제공자, 요구사항 프레임워크, ‘Prestataires de vérification d’identité à distance, Référentiel d’exigences’) △전자 식별 수단(전자 식별 수단 – 보안 요구 사항 저장소, Moyens d’identification électronique – Référentiel d’exigences de sécurité’)이다.독일 국가 사이버 보안국인 BSI는 독일에서 사이버 보안 촉진 및 사이버 보안 표준과 지침을 개발하고 있다. BSI 표준과 기술 보고서는 웹사이트를 통해 무료로 이용할 수 있다.BSI가 발행한 표준은 다음과 같다. △TR-03110 – 기계 판독 가능한 여행 서류(machine-readable travel documents, MRTD)를 위한 고급 보안 메커니즘에 대한 기술 지침 TR-03147 – 자연인의 신원 확인(예, 원격 신원 증명)을 위한 절차의 보증 수준 평가에 대한 기술 지침 등이다.영국 국가 표준기구인 영국 표준협회(British Standards Institute, BSI)는 광범위한 제품 및 서비스에 대한 기술 표준을 만들고 있으며 인증 및 표준 관련 서비스를 기업에 제공하고 있다.BSI는 BS 8626 온라인 사용자 식별 시스템의 설계 및 운영-실무 강령(Design and operation of online user identification systems – Code of practice)에 관한 표준을 발행했다.BS 8626 표준은 온라인 사용자 식별 시스템과 해당 상용자 디지털 신원 관리 시스템의 설계 및 운영에 대한 권장 사항 및 지원 지침을 제공하고 있다.
-
[특집-기술위원회] TC 118 - 압축기 및 공압 공구, 기계 및 장비(Compressors and pneumatic tools, machines and equipment)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 등이다.△1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111, △1964년 TC 112~TC 115, TC 117 등도 포함된다.ISO/TC 118 압축기 및 공압 공구, 기계 및 장비(Compressors and pneumatic tools, machines and equipment)와 관련된 기술위원회는 1965년 결성됐다. 사무국은 스웨덴 표준연구소(Swedish Institute for Standards, SIS)에서 맡고 있다.위원회는 제니퍼 알하임(Ms Jennifer Arleheim)가 책임지고 있다. 현재 의장은 제프 베렐스트(Mr Jef Verelst)으로 임기는 2025년까지다.ISO 기술 프로그램 관리자는 키르시 실란데르-반 후넨(Mrs Kirsi Silander-van Hunen), ISO 편집 관리자는 빈센조 바쭈치(M Vincenzo Bazzucchi) 등으로 조사됐다.범위는 공기 압축기, 공정·석유·화학 및 가스 산업 서비스용 압축기, 공압 도구 및 기계, 압축 공기 처리기술 등의 표준화다. 단, 공압 공구 생크 및 공구 피팅 치수는 ISO/TC 29의 범위에 속한다.현재 ISO/TC 118 사무국과 관련해 발행된 표준은 80개며 ISO/TC 118 사무국과 관련해 개발중인 표준은 6개다. 참여하고 있는 회원은 14개국, 참관 회원은 20개국이다.□ ISO/TC 118 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 118/SC 1 Process compressors ; 발행된 표준 10개, 개발 중인 표준 0개▷ISO/TC 118/SC 3 Pneumatic tools and machines ; 발행된 표준 43개, 개발 중인 표준 0개▷ISO/TC 118/SC 4 Compressed air treatment technology ; 발행된 표준 15개, 개발 중인 표준 1개▷ISO/TC 118/SC 6 Air compressors and compressed air systems ; 발행된 표준 12개, 개발 중인 표준 3개
-
[특집-공동기술위원회] ⑤JTC 1/SC 6 시스템 간 통신 및 정보 교환(Telecommunications and information exchange between systems)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(Working Group, WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등을 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.또한 국제전기기술위원회(International Electro-technical Commission, IEC)는 전기 및 전자 제품의 고품질 인프라와 국제 무역을 뒷받침하는 글로벌 비영리 회원 조직이다.기술 혁신, 저렴한 인프라 개발, 효율적이고 지속 가능한 에너지 접근, 스마트 도시화 및 교통 시스템, 기후 변화 완화를 촉진하고 사람과 환경의 안전을 향상시키는 역할을 수행하고 있다. 170개 이상의 국가를 통합하고 전 세계 2만명의 전문가에게 글로벌하고 중립적이며 독립적인 표준화 플랫폼을 제공하고 있다. 장치, 시스템, 설치, 서비스 및 인력이 필요에 따라 작동함을 구성원이 인증하는 4가지 적합성 평가 시스템을 관리한다.적합성 평가와 함께 정부가 국가 품질 인프라를 구축하고 모든 규모의 기업이 전 세계 대부분의 국가에서 일관되게 안전하고 신뢰할 수 있는 제품을 사고 팔 수 있도록 하는 기술 프레임워크를 제공하는 약 1만개의 IEC 국제표준을 발행하고 있다.이러한 ISO와 IEC가 공동으로 구성한 기술위원회 ISO/IEC JTC 1 정보 기술(Information technology)에 대해 살펴볼 예정이다. JTC 1은 1987년에 결성됐으며 사무국은 미국국립표준협회(American National Standards Institute, ANSI)에서 맡고 있다. 위원회는 리사 라지첼(Mrs Lisa Rajchel)가 책임지고 있다. 현재 의장은 필 웬블롬(Mr Phil Wennblom)으로 임기는 202년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), 스티븐 더트널(Mr Stephen Dutnall), ISO 편집 관리자는 앨리슨 레이드 자몬드(Ms Alison Reid-Jamond) 등으로 조사됐다. 범위는 정보기술 분야의 표준화다.현재 ISO/IEC JTC 1의 직접적인 책임 하에 발행된 표준은 517개며 직접적인 책임 하에 개발중인 표준은 23개다. 참여하고 있는 회원은 40개국, 참관 회원은 62개국이다.공동 기술위원회(Joint Technical Committee, JTC) 산하에서 활동하고 있는 분과위원회(Subcommittee, SC) 중 SC 1, SC 2에 이어 SC 6에 대해 살펴보면 다음과 같다.ISO/IEC JTC 1/SC 6 시스템간 통신 및 정보 교환(Telecommunications and information exchange between systems)과 관련된 분과위원회는 1988년 결성됐다. 사무국은 한국 국가기술표준원(Korean Agency for Technology and Standards, KATS)에서 맡고 있다.위원회는 오정엽(Mr Jungyup OH)이 책임지고 있다. 현재 의장은 강현국(Dr Hyun Kook Kahng)으로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), ISO 편집 관리자는 클라우디아 루에제(Ms Claudia Lueje) 등으로 조사됐다.범위는 사용 조건 뿐 아니라 시스템 기능, 절차, 매개변수를 포함해 개방형 시스템 간의 정보 교환을 다루는 통신 분야 표준화 작업을 진행해 왔다.이 표준화는 물리적, 데이터 링크, 네트워크 및 전송을 포함한 하위 계층의 프로토콜과 서비스뿐만 아니라 디렉토리 및 ASN.1(MFAN, NFC, PLC, 미래 네트워크 및 OID)을 포함하되 이에 국한되지 않는 상위 계층의 프로토콜 및 서비스를 포함하고 있다.현재 ISO/IEC JTC 1/SC 6 사무국의 직접적인 책임 하에 발행된 표준은 397개며 개발 중인 표준은 18개다. 참여하고 있는 회원은 19명, 참관 회원은 36명이다.□ ISO/IEC JTC 1/SC 6 사무국의 직접적인 책임하에 발행된 표준 및(또는) 프로젝트 397개 중 15개 목록▷ISO 1155:1978 Information processing — Use of longitudinal parity to detect errors in information messages▷ISO 1177:1985 Information processing — Character structure for start/stop and synchronous character oriented transmission▷ISO 1745:1975 Information processing — Basic mode control procedures for data communication systems▷ISO 2110:1989 Information technology — Data communication — 25-pole DTE/DCE interface connector and contact number assignments▷ISO 2110:1989/Amd 1:1991 Information technology — Data communication — 25-pole DTE/DCE interface connector and contact number assignments — Amendment 1: Interface connector and contact number assignments for a DTE/DCE interface for data signalling rates above 20 000 bit/s per second▷ISO/IEC 2593:2000 Information technology — Telecommunications and information exchange between systems — 34-pole DTE/DCE interface connector mateability dimensions and contact number assignments▷ISO 2628:1973 Basic mode control procedures — Complements▷ISO 2629:1973 Basic mode control procedures — Conversational information message transfer▷ISO/IEC 4005-1:2023 Telecommunications and information exchange between systems — Unmanned aircraft area network (UAAN) — Part 1: Communication model and requirements▷ISO/IEC 4005-2:2023 Telecommunications and information exchange between systems — Unmanned aircraft area network (UAAN) — Part 2: Physical and data link protocols for shared communication▷ISO/IEC 4005-3:2023 Telecommunications and information exchange between systems — Unmanned aircraft area network (UAAN) — Part 3: Physical and data link protocols for control communication▷ISO/IEC 4005-4:2023 Telecommunications and information exchange between systems — Unmanned aircraft area network (UAAN) — Part 4: Physical and data link protocols for video communication▷ISO 4902:1989 Information technology — Data communication — 37-pole DTE/DCE interface connector and contact number assignments▷ISO 4903:1989 Information technology — Data communication — 15-pole DTE/DCE interface connector and contact number assignments▷ISO/IEC 5021-1:2023 Telecommunications and information exchange between systems — Wireless LAN access control — Part 1: Networking architecture▷ISO/IEC 5021-2:2023 Telecommunications and information exchange between systems — Wireless LAN access control — Part 2: Dispatching platform□ ISO/IEC JTC 1/SC 6 사무국의 직접적인 책임하에 개발중인 표준 및(또는) 프로젝트 18개 중 15개 목록▷ISO/IEC PRF 4396-1 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 1: Reference model▷ISO/IEC PRF 4396-2 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 2: Common application connection establishment protocol▷ISO/IEC PRF 4396-3 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 3: Common distributed application protocol▷ISO/IEC PRF 4396-4 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 4: Complete enrolment procedures▷ISO/IEC PRF 4396-5 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 5: Incremental enrolment procedures▷ISO/IEC PRF 4396-6 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 6: RINA data transfer service▷ISO/IEC PRF 4396-7 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 7: Flow allocator▷ISO/IEC PRF 4396-8 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 8: RINA general delimiting procedures▷ISO/IEC PRF 4396-9 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 9: Error and flow control protocol▷ISO/IEC/IEEE DIS 8802-1Q Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 1Q: Bridges and bridged networks▷ISO/IEC 9594-8:2020/CD Cor 2 Information technology — Open systems interconnection — Part 8: The Directory: Public-key and attribute certificate frameworks — Technical Corrigendum 2▷ISO/IEC 9594-11:2020/CD Cor 1 Information technology — Open systems interconnection directory — Part 11: Protocol specifications for secure operations — Technical Corrigendum 1▷ISO/IEC 9594-11:2020/DAmd 1 Information technology — Open systems interconnection directory — Part 11: Protocol specifications for secure operations — Amendment 1▷ISO/IEC DIS 9594-12 Information technology — Open systems interconnection — Part 12: The Directory: Key management and public-key infrastructure establishment and maintenance▷ISO/IEC FDIS 18092 Telecommunications and information exchange between systems — Near Field Communication Interface and Protocol 1 (NFCIP-1)
-
[특집-공동기술위원회] ④JTC 1/SC 2 코드화된 문자 세트(Coded character sets)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(Working Group, WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등을 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.또한 국제전기기술위원회(International Electro-technical Commission, IEC)는 전기 및 전자 제품의 고품질 인프라와 국제 무역을 뒷받침하는 글로벌 비영리 회원 조직이다.기술 혁신, 저렴한 인프라 개발, 효율적이고 지속 가능한 에너지 접근, 스마트 도시화 및 교통 시스템, 기후 변화 완화를 촉진하고 사람과 환경의 안전을 향상시키는 역할을 수행하고 있다. 170개 이상의 국가를 통합하고 전 세계 2만명의 전문가에게 글로벌하고 중립적이며 독립적인 표준화 플랫폼을 제공하고 있다. 장치, 시스템, 설치, 서비스 및 인력이 필요에 따라 작동함을 구성원이 인증하는 4가지 적합성 평가 시스템을 관리한다.적합성 평가와 함께 정부가 국가 품질 인프라를 구축하고 모든 규모의 기업이 전 세계 대부분의 국가에서 일관되게 안전하고 신뢰할 수 있는 제품을 사고 팔 수 있도록 하는 기술 프레임워크를 제공하는 약 1만개의 IEC 국제표준을 발행하고 있다.이러한 ISO와 IEC가 공동으로 구성한 기술위원회 ISO/IEC JTC 1 정보 기술(Information technology)에 대해 살펴볼 예정이다. JTC 1은 1987년에 결성됐으며 사무국은 미국국립표준협회(American National Standards Institute, ANSI)에서 맡고 있다. 위원회는 리사 라지첼(Mrs Lisa Rajchel)가 책임지고 있다. 현재 의장은 필 웬블롬(Mr Phil Wennblom)으로 임기는 202년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), 스티븐 더트널(Mr Stephen Dutnall), ISO 편집 관리자는 앨리슨 레이드 자몬드(Ms Alison Reid-Jamond) 등으로 조사됐다. 범위는 정보기술 분야의 표준화다.현재 ISO/IEC JTC 1의 직접적인 책임 하에 발행된 표준은 517개며 직접적인 책임 하에 개발중인 표준은 23개다. 참여하고 있는 회원은 40개국, 참관 회원은 62개국이다.공동 기술위원회(Joint Technical Committee, JTC) 산하에서 활동하고 있는 분과위원회(Subcommittee, SC) 중 첫 번째 SC 1 활동에 이어 SC 2에 대해 살펴보면 다음과 같다.ISO/IEC JTC 1/SC 2 코드화된 문자 세트(Coded character sets)와 관련된 분과위원회는 1987년 결성됐다. 사무국은 일본산업표준조사회(日本産業標準調査会, Japanese Industrial Standards Committee, JISC)에서 맡고 있다.위원회는 나가사와 아유코(Ms Ayuko Nagasawa)가 책임지고 있다. 현재 의장은 마사루 타케치(Mr Masaru Takechi)으로 임기는 2025년까지다.ISO 기술 프로그램 관리자는 스테판 소바쥬(M Stéphane Sauvage), ISO 편집 관리자는 클라우디아 루에제(Ms Claudia Lueje) 등으로 조사됐다.범위는 문자열 순서, 관련 제어 기능, 정보 교환을 위한 코드화된 표현 및 코드 확장 기술을 포함해 그래픽 문자 집합 및 특성의 표준화다. 단, 오디오 및 사진 코딩은 제외된다.현재 ISO/IEC JTC 1/SC 2 사무국의 직접적인 책임하에 발행된 표준은 49개며 개발 중인 표준은 3개다. 참여하고 있는 회원은 24명, 참관 회원은 26명이다.□ ISO/IEC JTC 1/SC 2 사무국의 직접적인 책임하에 발행된 표준 및(또는) 프로젝트 49개 중 15개 목록▷ISO/IEC 646:1991 Information technology — ISO 7-bit coded character set for information interchange▷ISO 962:1974 Information processing — Implementation of the 7- bit coded character set and its 7- bit and 8-bit extensions on 9- track 12,7 mm (0.5 in) magnetic tape▷ISO 1113:1979 Information processing — Representation of the 7- bit coded character set on punched tape▷ISO 1154:1975 Information processing — Punched paper tape — Dimensions and location of feed holes and code holes▷ISO 1681:1973 Information processing — Unpunched paper cards — Specification▷ISO/IEC 2022:1994/Cor 1:1999 Information technology — Character code structure and extension techniques — Technical Corrigendum 1▷ISO/IEC 2022:1994 Information technology — Character code structure and extension techniques▷ISO 2033:1983 Information processing — Coding of machine readable characters (MICR and OCR)▷ISO 2047:1975 Information processing — Graphical representations for the control characters of the 7- bit coded character set▷ISO/IEC 2375:2003 Information technology — Procedure for registration of escape sequences and coded character sets▷ISO 3275:1974 Information processing — Implementation of the 7- bit coded character set and its 7- bit and 8- bit extensions on 3,81 mm magnetic cassette for data interchange▷ISO/IEC 4873:1991 Information technology — ISO 8-bit code for information interchange — Structure and rules for implementation▷ISO 5426-2:1996 Information and documentation — Extension of the Latin alphabet coded character set for bibliographic information interchange — Part 2: Latin characters used in minor European languages and obsolete typograph▷ISO 5426:1983 Extension of the Latin alphabet coded character set for bibliographic information interchange▷ISO 5427:1984 Extension of the Cyrillic alphabet coded character set for bibliographic information interchange□ ISO/IEC JTC 1/SC 2 사무국의 직접적인 책임하에 개발중인 표준 및(또는) 프로젝트 3개 목록▷ISO/IEC CD TR 2375 Information technology – Registered escape sequences and coded character sets▷ISO/IEC 10646:2020/CD Amd 2.3 Information technology — Universal coded character set (UCS) — Amendment 2: Todhri, Garay, Tulu-Tigalari, Sunuwar, Gurung Khema, Kirat Rai, and other characters▷ISO/IEC CD 14651 Information technology — International string ordering and comparison — Method for comparing character strings and description of the common template tailorable ordering