검색결과
-
[특집-기술위원회] TC 168 - 보철물 및 교정기(Prosthetics and orthotics)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.△1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 △1976년 TC 165, TC 166 등도 포함된다.ISO/TC 168 보철물 및 교정기(Prosthetics and orthotics)과 관련된 기술위원회는 TC 167과 마찬가지로 1977년 결성됐다. 사무국은 독일 표준화기구(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다.위원회는 잘리니 스리타란(Mrs Jalini Sritharan)가 책임지고 있으며 현재 의장은 시몬 올러(Mrs Dr Simone Oehler)이며 임기는 2026년까지다. ISO 기술 프로그램 관리자는 마호 타카하시(Mme Maho Takahashi), ISO 편집 관리자는 발레리아 아가멤논(Ms Valeria Agamennone) 등으로 조사됐다.범위는 성능, 안전, 환경요인, 호환성 과 같은 측면을 다루고 있는 보철물및 교정기 분야의 표준화다. 임시 및 영구 절차와 장치가 포함되며 보철물(인공 수지 및 보조 장비)에 대한 기준이 우선시 된다. 현재 ISO/TC 168 사무국의 직접적인 책임 하에 발행된 표준은 30개며 ISO/TC 168 사무국의 직접적인 책임 하에 개발 중인 표준은 7개다. 참여하고 있는 회원은 17개국, 참관 회원은 15개국이다.□ ISO/TC 168 사무국의 직접적인 책임 하에 발행된 표준 30개 중 15개 목록▷ISO/TS 4549:2023 Orthotics — Method for testing the reliability of microprocessor-controlled ankle moment units of ankle-foot orthoses▷ISO 8548-1:1989 Prosthetics and orthotics — Limb deficiencies — Part 1: Method of describing limb deficiencies present at birth▷ISO 8548-2:2020 Prosthetics and orthotics — Limb deficiencies — Part 2: Method of describing lower limb amputation stumps▷ISO 8548-3:1993 Prosthetics and orthotics — Limb deficiencies — Part 3: Method of describing upper limb amputation stumps▷ISO 8548-4:1998 Prosthetics and orthotics — Limb deficiencies — Part 4: Description of causal conditions leading to amputation▷ISO 8548-5:2003 Prosthetics and orthotics — Limb deficiencies — Part 5: Description of the clinical condition of the person who has had an amputation▷ISO 8549-1:2020 Prosthetics and orthotics — Vocabulary — Part 1: General terms for external limb prostheses and external orthoses▷ISO 8549-2:2023 Prosthetics and orthotics — Vocabulary — Part 2: Terms relating to external limb prostheses▷ISO 8549-3:2020 Prosthetics and orthotics — Vocabulary — Part 3: Terms relating to orthoses▷ISO 8549-4:2020 Prosthetics and orthotics — Vocabulary — Part 4: Terms relating to limb amputation▷ISO 8551:2020 Prosthetics and orthotics — Functional deficiencies — Description of the person to be treated with an orthosis, clinical objectives of treatment, and functional requirements of the orthosis▷ISO 10328:2016 Prosthetics — Structural testing of lower-limb prostheses — Requirements and test methods▷ISO 13404:2007 Prosthetics and orthotics — Categorization and description of external orthoses and orthotic components▷ISO 13405-1:2015 Prosthetics and orthotics — Classification and description of prosthetic components — Part 1: Classification of prosthetic components▷ISO 13405-2:2015 Prosthetics and orthotics — Classification and description of prosthetic components — Part 2: Description of lower limb prosthetic components□ ISO/TC 168 사무국의 직접적인 책임 하에 개발 중인 표준 7개 목록▷ISO/DIS 8548-3 Prosthetics and orthotics — Limb deficiencies — Part 3: Method of describing upper limb amputation residuum▷ISO/CD 8549-4 Prosthetics and orthotics — Vocabulary — Part 4: Terms relating to limb amputation▷ISO/CD 10328 Prosthetics — Structural testing of lower-limb prostheses — Requirements and test methods▷ISO/DIS 13404-1 Prosthetics and orthotics — External orthoses and orthotic components — Uses, classification and description — Part 1: Lower limb orthoses▷ISO/AWI 16955 Prosthetics — Quantification of physical parameters of ankle foot devices and foot units▷ISO/DIS 22523 External limb prostheses and external orthoses — Requirements and test methods▷ISO/FDIS 22675 Prosthetics — Testing of ankle-foot devices and foot units — Requirements and test methods
-
[특집-기술위원회] TC 162 - 문, 창문 및 커튼월링(Doors, windows and curtain walling)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.△1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 등도 포함된다.ISO/TC 162 문, 창문 및 커튼월링(Doors, windows and curtain walling)과 관련된 기술위원회는 1975년 결성됐다. 사무국은 일본산업표준조사회(日本産業標準調査会, Japanese Industrial Standards Committee, JISC)에서 맡고 있다.위원회는 아키라 쿠도(Mr Akira Kudo)가 책임지고 있으며 현재 의장은 야스오 오미(Dr Yasuo Omi)이며 임기는 2025년까지다. ISO 기술 프로그램 관리자는 안나 카테리나 로시(Dr Anna Caterina Rossi), ISO 편집 관리자는 ISO 편집팀(ISO Editing Team) 등으로 조사됐다.범위는 문, 문짝, 창문, 커튼 분야의 표준화다. 특정 성능 요구사항, 용어, 제조 크기 및 치수, 테스트 방법을 포괄하는 적절한 재료로 제조된 하드웨어를 포함하고 있다.ISO/TC 67의 범위에 포함되는 석유, 석유화학 및 천연가스 산업 응용 분야의 자재, 장비 및 해양 구조물은 제외된다. 부식성 및 폐기물 연료와 가솔린도 범위에서 제외된다.단, ISO/TC 59를 따르고 있는 건물의 다른 부분과의 치수 조정, 건물 전체에서 파생된 일반 성능 요구사항에 대한 책임은 제외된다.현재 ISO/TC 162 사무국의 직접적인 책임 하에 발행된 표준은 21개며 ISO/TC 162 사무국의 직접적인 책임 하에 개발 중인 표준은 2개다. 참여하고 있는 회원은 26개국, 참관 회원은 30개국이다.□ ISO/TC 162 사무국의 직접적인 책임 하에 발행된 표준 21개 중 15개 목록▷ISO 6442:2005 Door leaves — General and local flatness — Measurement method▷ISO 6443:2005 Door leaves — Method for measurement of height, width, thickness and squareness▷ISO 6444:2005 Door leaves — Determination of the behaviour under humidity variations in successive uniform climates▷ISO 6445:2005 Doors — Behaviour between two different climates — Test method▷ISO 6612:2023 Windows and doors — Resistance to wind load — Test method▷ISO 6613:2023 Windows and doors — Air permeability — Test method▷ISO 8248:1985 Windows and door height windows — Mechanical tests▷ISO 8269:1985 Doorsets — Static loading test▷ISO 8270:2023 Windows and doors — Determination of the resistance to soft and heavy body impact for doors▷ISO 8271:2005 Door leaves — Determination of the resistance to hard body impact▷ISO 8273:1985 Doors and doorsets — Standard atmospheres for testing the performance of doors and doorsets placed between different climates▷ISO 8274:2005 Windows and doors — Resistance to repeated opening and closing — Test method▷ISO 8275:2023 Hinged or pivoted doors — Determination of the resistance to vertical load▷ISO 9379:2005 Operating forces — Test method — Doors▷ISO 9380:1990 Doorsets — Repeated torsion test□ ISO/TC 162 사무국의 직접적인 책임 하에 개발 중인 표준 2개 목록▷ISO/DIS 16316 Windows, doors and curtain walling — Impacted by windborne debris in windstorms — Test method and classification▷ISO/AWI 21174 Hardware for doors and windows — Vocabulary
-
[특집-기술위원회] TC 160 - 건물 유리(Glass in building)… 영국 표준협회(BSI)가 사무국 운영스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.△1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 등도 포함된다.ISO/TC 160 건물 유리(Glass in building)와 관련된 기술위원회는 TC 156, TC 157, TC 158, TC 159와 마찬가지로 1974년 결성됐다. 사무국은 영국 표준협회(British Standards Institution, BSI)에서 맡고 있다.위원회는 톰 스택(Mr Tom Stack)이 책임지고 있으며 현재 의장은 노버트 브룩(Mr Dr Norbert Wruk)이다. ISO 기술 프로그램 관리자는 안나 카테리나 로시(Dr Anna Caterina Rossi), ISO 편집 관리자는 발레리아 아가넨노네(Ms Valeria Agamennone) 등으로 조사됐다.범위는 용어, 성능 요구사항, 계산 및 테스트 방법, 설계 및 시공 규칙, 치수 특성을 포함한 재료의 분류 및 사양을 포함한 건물 유리 분야의 표준화다.현재 ISO/TC 160 사무국의 직접적인 책임 하에 발행된 표준은 58개며 ISO/TC 160 사무국의 직접적인 책임 하에 개발 중인 표준은 10개다. 참여하고 있는 회원은 22개국, 참관 회원은 30개국이다.□ ISO/TC 160 사무국의 직접적인 책임 하에 발행된 표준 58개 중 15개 목록▷ISO 1288-1:2016 Glass in building — Determination of the bending strength of glass — Part 1: Fundamentals of testing glass▷ISO 1288-2:2016 Glass in building — Determination of the bending strength of glass — Part 2: Coaxial double-ring test on flat specimens with large test surface areas▷ISO 1288-3:2016 Glass in building — Determination of the bending strength of glass — Part 3: Test with specimen supported at two points (four point bending)▷ISO 1288-4:2016 Glass in building — Determination of the bending strength of glass — Part 4: Testing of channel shaped glass▷ISO 1288-5:2016 Glass in building — Determination of the bending strength of glass — Part 5: Coaxial double ring test on flat specimens with small test surface areas▷ISO 9050:2003 Glass in building — Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors▷ISO 10291:1994 Glass in building — Determination of steady-state U values (thermal transmittance) of multiple glazing — Guarded hot plate method▷ISO 10292:1994 Glass in building — Calculation of steady-state U values (thermal transmittance) of multiple glazing▷ISO 10293:1997 Glass in building — Determination of steady-state U values (thermal transmittance) of multiple glazing — Heat flow meter method▷ISO 11479-1:2011 Glass in building — Coated glass — Part 1: Physical defects▷ISO 11479-2:2011 Glass in building — Coated glass — Part 2: Colour of façade▷ISO 11485-1:2011 Glass in building — Curved glass — Part 1: Terminology and definitions▷ISO 11485-2:2011 Glass in building — Curved glass — Part 2: Quality requirements▷ISO 11485-3:2014 Glass in building — Curved glass — Part 3: Requirements for curved tempered and curved laminated safety glass▷ISO 12540:2017 Glass in building — Tempered soda lime silicate safety glass □ ISO/TC 160 사무국의 직접적인 책임 하에 개발 중인 표준 10개 목록▷ISO/CD 16293-2 Glass in building — Basic soda lime silicate glass products — Part 2: Float glass▷ISO/CD 18178 Glass in building — Laminated solar photovoltaic glass for use in buildings▷ISO/CD 19916-4 Glass in building — Vacuum insulating glass — Part 4: Pendulum impact testing and classification of safety glass▷ISO/DIS 20492-1 Glass in buildings - Insulating glass — Part 1: Durability of edge seals by climate tests▷ISO/DIS 20492-2 Glass in buildings - Insulating glass — Part 2: Chemical fogging tests▷ISO/DIS 20492-3 Glass in buildings — Insulating glass — Part 3: Gas concentration and gas leakage▷ISO/DIS 20492-4 Glass in buildings — Insulating glass — Part 4: Methods of test for the physical attributes of edge seals▷ISO/CD 28278-1 Glass in building — Glass products for structural sealant glazing — Part 1: Supported and unsupported monolithic and multiple glazing▷ISO/CD 28278-2 Glass in building — Glass products for structural sealant glazing — Part 2: Assembly rules▷IEC/AWI 63092-3 Photovoltaics in buildings — Part 3: Evaluation methodology of SHGC for Building integrated photovoltaic modules with various designs
-
[특집-기술위원회] TC 153 - 밸브(Valves)… 현재까지 28개 표준 발행스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 등이다.△1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111, △1964년 TC 112~TC 115, TC 117, △1965년 TC 118, △1966년 TC 119~TC 122, △1967년 TC 123, △1968년 TC 126, TC 127, △1969년 TC 130~136, △1970년 TC 137, TC 138, TC 142, TC 145 등도 포함된다.ISO/TC 153 밸브(Valves)와 관련된 기술위원회는 TC 146, TC 147, TC 148, TC 149, TC 150과 마찬가지로 1971년 결성됐다. 사무국은 프랑스 표준화기구(Association Française de Normalization, AFNOR)에서 맡고 있다.위원회는 헬렌 크로스(Mme Hélène Cros)가 책임지고 있다. 현재 의장은 파스칼 빈지오(M Pascal Vinzio)으로 임기는 2025년까지다.ISO 기술 프로그램 관리자는 메르세 페레 에르난데스(Mme Mercè Ferrés Hernández), ISO 편집 관리자는 파비올라 카라골 리베라(Ms Fabiola Caragol Rivera) 등으로 조사됐다.범위는 산업용 밸브, 어태치먼트 포함한 밸브 액츄에이터, 스팀 트랩 분야의 표준화다. 호환성을 다루는 매개변수, 액추에이터 장착을 위한 밸브 결합 세부 사항, 테스트, 마킹, 품질 요구 사항, 용어 및 기타 관련 매개 변수를 포함하고 있다. 단, 아래 사항은 153 표준화에서 제외된다.△ISO / TC 185의 책임인 안전 및 릴리프 밸브 및 기타 압력 릴리프 장치△ISO/TC 67의 책임인 석유 및 천연가스 산업용 크로스 컨트리 파이프라인용 웰헤드 장비용 생산 밸브 및 밸브△IEC / TC 65의 책임을 맡은 산업 공정 제어 시스템에 사용되는 최종 제어 요소를 형성하는 밸브△ISO / TC 138의 책임을 맡은 주로 플라스틱으로 만들어진 외피를 가진 밸브△위생용 밸브△솔레노이드현재 ISO/TC 153 사무국의 직접적인 책임 하에 발행된 표준은 28개며 SO/TC 150 사무국의 직접적인 책임 하에 개발 중인 표준은 2개다. 참여하고 있는 회원은 20개국, 참관 회원은 25개국이다.□ ISO/TC 153 사무국의 직접적인 책임 하에 발행된 표준 28개 중 15개 목록▷ISO 5115:2023 Industrial valves — Part-turn valve actuation▷ISO 5117:2023 Automatic steam traps — Production and performance characteristic tests▷ISO 5208:2015 Industrial valves — Pressure testing of metallic valves▷ISO 5209:2019 General purpose industrial valves — Marking▷ISO 5210:2023 Industrial valves — Multi-turn valve actuator attachments▷ISO 5211:2023 Industrial valves — Part-turn actuator attachments▷ISO 5752:2021 Metal valves for use in flanged pipe systems — Face-to-face and centre-to-face dimensions▷ISO 6002:2021 Industrial valves — Bolted bonnet steel gate valves▷ISO 6552:1980 Automatic steam traps — Definition of technical terms▷ISO 6552:1980/Cor 1:2009 Automatic steam traps — Definition of technical terms — Technical Corrigendum 1▷ISO 6553:2016 Automatic steam traps — Marking▷ISO 6554:1980 Flanged automatic steam traps — Face-to-face dimensions▷ISO 6704:1982 Automatic steam traps — Classification▷ISO 7121:2016 Steel ball valves for general-purpose industrial applications▷ISO 10434:2020 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries □ ISO/TC 153 사무국의 직접적인 책임 하에 개발 중인 표준 2개 목록 ▷ISO 5640 Industrial valves — Mounting kits for part-turn valve actuator attachment ▷ISO/CD 12101 Industrial valves — Measurement, test and qualification procedures for fugitive emissions — Classification system and qualification procedures for type testing of stem seals for valves
-
[특집-기술위원회] TC 142 - 공기 및 기타 가스 청소 장비(Cleaning equipment for air and other gases)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다. 기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 등이다.△1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111, △1964년 TC 112~TC 115, TC 117, △1965년 TC 118, △1966년 TC 119~TC 122, △1967년 TC 123, △1968년 TC 126, TC 127, △1969년 TC 130~136 등도 포함된다.ISO/TC 142 공기 및 기타 가스 청소 장비(Cleaning equipment for air and other gases) 관련된 기술위원회는 TC 137, TC 138과 마찬가지로 1970년 결성됐다. 사무국은 이탈리아 표준화기구(Ente Italiano di Normazione, UNI)에서 맡고 있다.위원회는 안나 마르티노(Mrs Anna Martino)가 책임지고 있다. 현재 의장은 리카르도 로마노(Mr Riccardo Romanò)으로 임기는 2025년까지다.ISO 기술 프로그램 관리자는 블란딘 가르시아(Mme Blandine Garcia), ISO 편집 관리자는 앤 기엣(Ms Anne Guiet) 등으로 조사됐다.범위는 일반 환기 및 산업용 응용 분야의 공기 및 가스 청소, 소독 장비에 대한 용어, 분류, 특성, 테스트 및 성능 방법 분야의 표준화다.단, 다른 ISO 기술 위원회의 범위 내에 있는 모바일 장비의 가스 터빈 및 IC 엔진용 배기 가스 세정기는 제외한다. 또한 기술 위원회 ISO/TC 94 업무 분야인 개인 보호 장비용 필터, ISO/TC 22, 23 및 127이 적용되는 모바일 장비의 캐빈 필터 등도 표준화 범위에서 제외된다.현재 ISO/TC 142 사무국의 직접적인 책임 하에 발행된 표준은 27개며 ISO/TC 142 사무국의 직접적인 책임 하에 개발 중인 표준은 22개다. 참여하고 있는 회원은 23개국, 참관 회원은 20개국이다.□ ISO/TC 142 사무국의 직접적인 책임 하에 발행된 표준 27개 중 15개 목록▷ISO 10121-1:2014 Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation — Part 1: Gas-phase air cleaning media▷ISO 10121-2:2013 Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation — Part 2: Gas-phase air cleaning devices (GPACD)▷ISO 10121-3:2022 Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation — Part 3: Classification system for GPACDs applied to treatment of outdoor air▷ISO 15714:2019 Method of evaluating the UV dose to airborne microorganisms transiting in-duct ultraviolet germicidal irradiation devices▷ISO 15727:2020 UV-C devices — Measurement of the output of a UV-C lamp▷ISO 15858:2016 UV-C Devices — Safety information — Permissible human exposure▷ISO 15957:2015 Test dusts for evaluating air cleaning equipment▷ISO 16170:2016 In situ test methods for high efficiency filter systems in industrial facilities▷ISO 16890-1:2016 Air filters for general ventilation — Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM)▷ISO 16890-2:2022 Air filters for general ventilation — Part 2: Measurement of fractional efficiency and air flow resistance▷ISO 16890-3:2016 Air filters for general ventilation — Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured▷ISO 16890-4:2022 Air filters for general ventilation — Part 4: Conditioning method to determine the minimum fractional test efficiency▷ISO 16891:2016 Test methods for evaluating degradation of characteristics of cleanable filter media▷ISO 21083-1:2018 Test method to measure the efficiency of air filtration media against spherical nanomaterials — Part 1: Size range from 20 nm to 500 nm▷ISO/TS 21083-2:2019 Test method to measure the efficiency of air filtration media against spherical nanomaterials — Part 2: Size range from 3 nm to 30 nm□ ISO/TC 114 사무국의 직접적인 책임 하에 개발 중인 표준 22개 중 15개 목록▷ISO/CD 5371 High efficiency filtration units in exhaust ventilation system of biosafety facilities▷ISO/AWI 10121-1 Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation — Part 1: Gas-phase air cleaning media▷ISO/AWI 10121-2 Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation — Part 2: Gas-phase air cleaning devices (GPACD)▷ISO/CD 15858 UV-C Devices — Safety information — Permissible human exposure▷ISO/AWI 15957 Test dusts for evaluating air cleaning equipment▷ISO/DIS 16313-1 Laboratory test of dust collection systems utilizing porous filter media online cleaned using pulses of compressed gas — Part 1: Systems utilizing integrated fans▷ISO/AWI 16890-1 Air filters for general ventilation — Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM)▷ISO/DIS 16890-3 Air filters for general ventilation — Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured▷ISO/AWI 17597 Test Method for Measuring in-duct AirborneMicroorganisms Inactivation Effectiveness (AMIE)▷ISO/FDIS 23137-1 Requirements for aerosol filters used in nuclear facilities against specified severe conditions — Part 1: General requirements▷ISO/DIS 23138 Biological equipment for treating air and other gases — Principles and classification▷ISO/DIS 23742 Test method for the evaluation of permeability and filtration efficiency distribution of bag filter medium▷ISO/FDIS 29461-3 Air intake filter systems for rotary machinery — Test methods — Part 3: Mechanical integrity of filter elements▷ISO/CD 29461-4 Air intake filter systems for rotary machinery — Part 4: Test methods for static filter systems in coastal and offshore environments▷ISO/DIS 29463-1 High efficiency filters and filter media for removing particles from air — Part 1: Classification, performance, testing and marking
-
[기획-디지털 ID 표준] ⑯산업단체와 포럼 - SOG-IS(Senior Officials Group-Information Systems Security)디지털 ID(Digital Identity) 분야에서 상호운용(interoperable)이 가능하고 안전한 서비스 보장을 위한 표준에 대한 수요가 증가하고 있다. 다양한 표준 조직 및 산업 기관이 활동하는 이유다.디지털 ID 표준을 개발하는 곳은 유럽표준화기구(European Standardisation Organistions), 국제표준화기구(International Standardisation Organisations), 상업 포럼 및 컨소시엄, 국가기관 등 다양하다.산업단체와 포럼은 공식적으로 표준화 조직으로 간주되지 않지만 디지털 ID 영역을 포함한 특정 영역에서는 사실상의 표준을 제공하고 있다.몇몇의 경우 이들 단체들이 추가 비준을 위해 자신들이 생산한 사양을 ISO/IEC, ITU 통신 표준화 부문(ITU-T), ETSI 등 표준 기관에 제출할 수 있다.이러한 산업단체 및 포럼에는 △인증기관브라우저 포럼(Certification Authority Browser Forum, CA/Browser Forum) △클라우드 서명 컨소시엄(Cloud Signature Consortium, CSC) △국제자금세탁방지기구(Financial Action Task Force, FATF) △신속온라인인증(Fast Identity Online, FIDO) △국제인터넷표준화기구(Internet Engineering Task Force, IETF) △구조화 정보 표준 개발기구(오아시스)(Organization for the Advancement of Structured Information Standards, OASIS) △오픈ID(OpenID) △SOG-IS(Senior Officials Group-Information Systems Security) △W3C(World Wide Web Consortium) 등이다.SOG-IS(Senior Officials Group-Information Systems Security)는 유럽연합(EU) 또는 유럽 자유 무역 연합(European Free Trade Association, EFTA) 국가의 정부 조직 또는 정부기관간 협정으로 이사회 결정 92/242/EEC (12) 및 후속 이사회 권장 사항 95/144/EC (13)에 따라 작성됐다.SOG-IS 암호 워킹그룹(Crypto Working Group)이 발행한 'SOG-IS Crypto Evaluation Scheme Agreed Cryptographic Mechanisms' 문서는 주로 개발자와 평가자를 대상으로 작성됐다.어떤 암호화 메커니즘이 동의된 것으로 인식되는지, 즉 SOG-IS 암호화 평가 체계의 모든 SOG-IS 참가자가 수락할 순비가 됐는지 지정하는 것을 목적으로 하고 있다.'SOG-IS Crypto Evaluation Scheme Agreed Cryptographic Mechanisms' 문서의 목차를 살펴보면 다음과 같다.목차(Table of contents)1. Introduction1.1 Objective1.2 Classification of Cryptographic Mechanisms1.3 Security Level1.4 Organization of the Document1.5 Related Documents2. Symmetric Atomic Primitives2.1 Block Ciphers2.2 Stream Ciphers2.3 Hash Functions2.4 Secret Sharing3. Symmetric Constructions3.1 Confidentiality Modes of Operation: Encryption/Decryption Modes3.2 Specific Confidentiality Modes: Disk Encryption3.3 Integrity Modes: Message Authentication Codes3.4 Symmetric Entity Authentication Schemes3.5 Authenticated Encryption3.6 Key Protection3.7 Key Derivation Functions3.8 Password Protection/Password Hashing Mechanisms4. Asymmetric Atomic Primitives4.1 RSA/Integer Factorization4.2 Discrete Logarithm in Finite Fields4.3 Discrete Logarithm in Elliptic Curves4.4 Other Intractable Problems5. Asymmetric Constructions5.1 Asymmetric Encryption Scheme5.2 Digital Signature5.3 Asymmetric Entity Authentication Schemes5.4 Key Establishment6. Random Generator6.1 Random Source6.2 Deterministic Random Bit Generator6.3 Random Number Generator with Specific Distribution7. Key Management7.1 Key Generation7.2 Key Storage and Transport7.3 Key Use7.4 Key Destruction8. Person AuthenticationA Glossary
-
[특집-기술위원회] TC 131 - 유체동력시스템(Fluid power systems)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 등이다.△1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111, △1964년 TC 112~TC 115, TC 117, △1965년 TC 118, △1966년 TC 119~TC 122, △1967년 TC 123, △1968년 TC 126, TC 127 등도 포함된다.ISO/TC 131 유체동력시스템(Fluid power systems)과 관련된 기술위원회는 TC 130과 마찬가지로 1969년에 결성됐다. 사무국은 미국 국립표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 앨리슨 포사이드(Mrs Allison Forsythe)가 책임지고 있다. 현재 의장은 이반 셰필드(Mr Ivan Sheffield)로 임기는 2026년까지다.ISO 기술 프로그램 관리자는 키르시 실란데르-반 후넨(Mrs Kirsi Silander-van Hunen), ISO 편집 관리자는 ISO 편집팀(ISO Editing Team) 등으로 조사됐다.범위는 용어, 구성, 주요 치수, 안전 요구 사항, 테스트 및 검사 방법으로 구성된 유체 동력 시스템 및 구성 요소 분야의 표준화다.TC 131 표준화에 다음과 같은 구성 요소들이 포함된다. △어큐뮬레이터 △압축 공기 건조기 △도체(단단하고 유연한) △실린더 △전기 유압 및 전기 공압 구성 요소와 시스템 △피팅 △유체 장치 △호스 피팅 및 어셈블리 △필터 및 분리기 △유체 △유압 펌프 △모터 △가동부 유체 제어 장치 △공압 윤활 장치 △조절기 △퀵 액션 커플링 △저장소 △밀봉 장치 △밸브 등이다.현재 ISO/TC 131 사무국과 관련해 발행된 표준은 237개며 ISO/TC 131 사무국의 직접적인 책임 하에 발행된 표준은 10개다. ISO/TC 130 사무국과 관련해 개발 중인 표준은 20개다. 참여하고 있는 회원은 16개국, 참관 회원은 19개국이다.□ ISO/TC 130 사무국 분과위원회(Subcommittee)의 책임 하에 발행된 표준 10개 목록▷ISO 2944:2000 Fluid power systems and components — Nominal pressures▷ISO 5352-1:2023 Hydraulic fluid power — Determination of discharge flow rate and thermal losses of gas loaded accumulators — Part 1: Test method▷ISO/TR 10946:2019 Hydraulic fluid power — Gas-loaded accumulators with separator — Selection of preferred hydraulic ports▷ISO/TR 16194:2017 Pneumatic fluid power — Assessment of component reliability by accelerated life testing — General guidelines and procedures▷ISO 19973-1:2015 Pneumatic fluid power — Assessment of component reliability by testing — Part 1: General procedures▷ISO 19973-2:2015 Pneumatic fluid power — Assessment of component reliability by testing — Part 2: Directional control valves▷ISO 19973-2:2015/Amd 1:2019 Pneumatic fluid power — Assessment of component reliability by testing — Part 2: Directional control valves — Amendment 1▷ISO 19973-3:2015 Pneumatic fluid power — Assessment of component reliability by testing — Part 3: Cylinders with piston rod▷ISO 19973-4:2014 Pneumatic fluid power — Assessment of component reliability by testing — Part 4: Pressure regulators▷ISO 19973-5:2015 Pneumatic fluid power — Assessment of component reliability by testing — Part 5: Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves□ ISO/TC 131 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 131/SC 1 Symbols, terminology and classifications ; 발행된 표준 7개, 개발 중인 표준 1개▷ISO/TC 131/SC 2 Pumps, motors and integral transmissions ; 발행된 표준 5개, 개발 중인 표준 0개▷ISO/TC 131/SC 3 Cylinders ; 발행된 표준 24개, 개발 중인 표준 1개▷ISO/TC 131/SC 4 Connectors and similar products and components ; 발행된 표준 50개, 개발 중인 표준 2개▷ISO/TC 131/SC 5 Control products and components ; 발행된 표준 50개, 개발 중인 표준 4개▷ISO/TC 131/SC 6 Contamination control ; 발행된 표준 38개, 개발 중인 표준 5개▷ISO/TC 131/SC 7 Sealing devices ; 발행된 표준 27개, 개발 중인 표준 2개▷ISO/TC 131/SC 8 Product testing ; 발행된 표준 22개, 개발 중인 표준 4개▷ISO/TC 131/SC 9 Installations and systems ; 발행된 표준 4개, 개발 중인 표준 1개□ ISO/TC 131 사무국의 작업그룹(Working Group, WG) 현황▷ISO/TC 131/WG 1 Accumulators▷ISO/TC 131/WG 4 Determination of the reliability of pneumatic components by testing
-
[특집-기술위원회] TC 127 - 토공장비(Earth-moving machinery)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다. 기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 등이다.△1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111, △1964년 TC 112~TC 115, TC 117, △1965년 TC 118, △1966년 TC 119~TC 122, △1967년 TC 123 등도 포함된다.ISO/TC 127 토공장비(Earth-moving machinery)와 관련된 기술위원회는 TC 126과 마찬가지로 1968년 결성됐다. 사무국은 미국국립표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 샐리 사이츠(Ms Sally Seitz)가 책임지고 있다. 현재 의장은 찰스 크로웰(Mr Charles Crowell)로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 메르세 페레 에르난데스(Mme Mercè Ferrés Hernández), ISO 편집 관리자는 파비올라 카라골 리베라(Ms Fabiola Caragol Rivera) 등으로 조사됐다.범위는 토공 및 관련 기계의 명명법, 사용 분류, 등급, 기술 요구 사항, 테스트 방법, 안전 요구 사항, 작동, 유지 관리 매뉴얼 형식의 표준화다.현재 ISO/TC 127 사무국과 관련해 발행된 표준은 178개며 ISO/TC 127 사무국의 직접적인 책임 하에 발행한 표준은 4개다. ISO/TC 127 사무국과 관련해 개발 중인 표준은 18개다. 참여하고 있는 회원은 24개국, 참관 회원은 19개국이다.□ ISO/TC 127 사무국 분과위원회(Subcommittee)의 책임 하에 발행된 표준 4개 목록▷ISO 10987-2:2017 Earth-moving machinery — Sustainability — Part 2: Remanufacturing▷ISO 10987-3:2017 Earth-moving machinery — Sustainability — Part 3: Used machines▷ISO 10987:2012 Earth-moving machinery — Sustainability — Terminology, sustainability factors and reporting▷ISO/TR 19948:2016 Earth-moving machinery — Conformity assessment and certification process□ ISO/TC 127 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 127/SC 1 Test methods relating to safety and machine performance ; 발행된 표준 36개, 개발 중인 표준 1개▷ISO/TC 127/SC 2 Safety, ergonomics and general requirements ; 발행된 표준 76개, 개발 중인 표준 12개▷ISO/TC 127/SC 3 Machine characteristics, electrical and electronic systems, operation and maintenance ; 발행된 표준 39개, 개발 중인 표준 3개▷ISO/TC 127/SC 4 Terminology, commercial nomenclature, classification and ratings ; 발행된 표준 23개, 개발 중인 표준 2개□ ISO/TC 127 사무국의 작업그룹(Working Group, WG) 현황▷ISO/TC 127/AHG 3 Investigation regarding the differences between block handlers and wheel loaders▷ISO/TC 127/CAG Chair's Advisory Group▷ISO/TC 127/SG 1 ISO Off-Road Mobile Work Machine▷ISO/TC 127/WG 8 Sustainability▷ISO/TC 127/WG 17 Rechargeable Energy Storage System (RESS) application for EMM (ISO 5757)
-
[특집-기술위원회] TC 117 - 팬(Fans)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111 등이다.ISO/TC 117 팬(Fans)과 관련된 기술위원회는 TC 112, TC 113, TC 114, TC 115와 마찬가지로 1964년 결성됐다. 사무국은 영국표준협회(British Standards Institution, BSI)에서 맡고 있다.위원회는 산드라 마이크 더건(Mr Mike Duggan)가 책임지고 있다. 현재 의장은 제프 록우드(Mr Geoff Lockwood)으로 임기는 2026년까지다.ISO 기술 프로그램 관리자는 키르시 실란데르-반 후넨(Mrs Kirsi Silander-van Hunen), ISO 편집 관리자는 아룬 ABY 파라에카틸(Mr Arun ABY Paraecattil) 등으로 조사됐다.범위는 팬 분야의 표준화다. 단, IEC/TC 59 및 IEC/TC 61의 범위 내에서 가정용 및 이와 유사한 목적을 갖는 전기 팬 또는 팬 기반 전기 기기 등은 제외한다.현재 ISO/TC 117 사무국의 직접적인 책임하에 발행된 표준은 31개며 ISO/TC 117 사무국의 직접적인 책임하에 개발중인 표준은 8개다. 참여하고 있는 회원은 16명, 참관 회원은 22명이다.□ ISO/TC 117 사무국의 직접적인 책임 하에 발행된 표준 31개 중 15개 목록▷ISO 5801:2017 Fans — Performance testing using standardized airways▷ISO 5802:2001 Industrial fans — Performance testing in situ▷ISO 5802:2001/Amd 1:2015 Industrial fans — Performance testing in situ — Amendment 1▷ISO 12499:1999 Industrial fans — Mechanical safety of fans — Guarding▷ISO 12759-1:2023 Fans — Efficiency classification for fans — Part 1: General requirements▷ISO 12759-2:2019 Fans — Efficiency classification for fans — Part 2: Standard losses for drive components▷ISO 12759-3:2019 Fans — Efficiency classification for fans — Part 3: Fans without drives at maximum operating speed▷ISO 12759-4:2019 Fans — Efficiency classification for fans — Part 4: Driven fans at maximum operating speed▷ISO 12759-5:2021 Fans — Efficiency classification for fans — Part 5: Jet fans▷ISO 13347-1:2004 Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 1: General overview▷ISO 13347-1:2004/Amd 1:2010 Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 1: General overview — Amendment 1▷ISO 13347-1:2004/Cor 1:2006 Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 1: General overview — Technical Corrigendum 1▷ISO 13347-2:2004 Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 2: Reverberant room method▷ISO 13347-2:2004/Cor 1:2006 Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 2: Reverberant room method — Technical Corrigendum 1▷ISO 13347-3:2004 Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 3: Enveloping surface methods□ ISO/TC 117 사무국의 직접적인 책임 하에 개발중인 표준 8개 목록▷ISO/DIS 12759-6 Fans — Efficiency classification for fans — Part 6: Calculation of the fan energy index▷ISO/CD 13348 Industrial fans — Tolerances, methods of conversion and technical data presentation▷ISO/DIS 13351 Fans — Dimensions▷ISO/AWI TR 16219 Fans — System effects and system effect factors▷ISO/AWI 21684 Fans — Laboratory Methods of Testing Air Circulating Fans for Rating and Certification▷ISO/DIS 24660 Fans — Determination of airflow propelled through an open personnel door by a positive pressure ventilator▷ISO/AWI 27327-1 Fans — Air curtain units — Part 1: Laboratory methods of testing for aerodynamic performance rating▷ISO/DTR 27327-3 Fans — Air curtain units — Part 3: Test methods to determine energy effectiveness
-
[특집-기술위원회] TC107 - 금속 및 기타 무기 코팅(Metallic and other inorganic coatings)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC1~TC67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC68 △1950년 TC74 △1951년 TC76 △1952년 TC77 △1953년 TC79, TC81 △1955년 TC82, TC83 △1956년 TC84, TC85 △1957년 TC86, TC87, TC89 △1958년 TC91, TC92 △1959년 TC94 △1960년 TC96, TC98 △1961년 TC101, TC102, TC 104등 이다.ISO/TC 107 금속 및 기타 무기 코팅(Metallic and other inorganic coatings)과 관련된 기술위원회는 TC 105, TC 106과 마찬가지로 1962년 결성됐다. 사무국은 한국국가기술표준원(Korean Agency for Technology and Standards, KATS)에서 맡고 있다.위원회는 최진혁(Dr Jinhyuk Choi)이 책임지고 있다. 현재 의장은 권식철(Dr Sik-Chol Kwon)로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 스테판 소바쥬(M Stéphane Sauvage), ISO 편집 관리자는 ISO Editing Team 등으로 조사됐다.범위는 전기 분해, 융합, 진공 또는 화학적 수단, 기계적 증착, 이온 도금을 통해 적용되는 보호 및 장식 금속 코팅 특성의 표준화다.또한 전기 분해, 융합, 진공 또는 화학적 수단을 통해 적용되는 금속 표면의 보호 및 장식용 비금속 코팅(페인트 및 기타 유기 코팅 제외)의 특성도 포함된다.이러한 코팅에 대한 테스트 및 검사 방법의 표준화 뿐 아니라 금속 및 무기 코팅을 증착하기전 기판 준비에 관한 표준화도 포함된다.현재 ISO/TC 107 사무국과 관련해 발행된 표준은 162개며 ISO/TC 107 사무국의 직접적인 책임 하에 발행된 표준은 103개다. ISO/TC 107 사무국과 관련해 개발 중인 표준은 12개며 ISO/TC 107 사무국의 직접적인 책임 하에 개발 중인 표준은 8개다. 참여하고 있는 회원은 22명, 참관 회원은 24명이다.□ ISO/TC 107 사무국의 직접적인 책임하에 발행된 표준 103개 중 15개 목록▷ISO 1463:2021 Metallic and oxide coatings — Measurement of coating thickness — Microscopical method▷ISO 2063-1:2019 Thermal spraying — Zinc, aluminium and their alloys — Part 1: Design considerations and quality requirements for corrosion protection systems▷ISO 2063-2:2017 Thermal spraying — Zinc, aluminium and their alloys — Part 2: Execution of corrosion protection systems▷ISO 2064:1996 Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness▷ISO 2080:2022 Metallic and other inorganic coatings — Surface treatment, metallic and other inorganic coatings — Vocabulary▷ISO 2177:2003 Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution▷ISO 2178:2016 Non-magnetic coatings on magnetic substrates — Measurement of coating thickness — Magnetic method▷ISO 2360:2017 Non-conductive coatings on non-magnetic electrically conductive base metals — Measurement of coating thickness — Amplitude-sensitive eddy-current method▷ISO 2361:1982 Electrodeposited nickel coatings on magnetic and non-magnetic substrates — Measurement of coating thickness — Magnetic method▷ISO 2746:2015 Vitreous and porcelain enamels — High voltage test▷ISO 2747:1998 Vitreous and porcelain enamels — Enamelled cooking utensils — Determination of resistance to thermal shock▷ISO 2819:2017 Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion▷ISO 3497:2000 Metallic coatings — Measurement of coating thickness — X-ray spectrometric methods▷ISO 3543:2000 Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method▷ISO 3543:2000/Cor 1:2003 Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method — Technical Corrigendum 1□ ISO/TC 107 사무국의 직접적인 책임하에 개발 중인 표준 8개 목록▷ISO/FDIS 3882 Metallic and other inorganic coatings — Review of methods of measurement of thickness▷ISO 8181 Atomic layer deposition — Vocabulary▷ISO/FDIS 14919 Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification and technical supply conditions▷ISO 14920 Thermal spraying — Spraying and fusing of self-fluxing alloys▷ISO/AWI 21452 Specification and requirements of thermal spray coatings for power plant boiler tubes▷ISO/AWI 21456 Determination of the residual stress of TGO layer in thermal barrier coating by photoexcitation fluorescence piezoelectric spectroscopy▷ISO/AWI 21465 Test method for CMAS corrosion of thermal/environmental barrier coatings under dynamic thermal cycling▷ISO/DIS 28721-2 Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 2: Designation and specification of resistance to chemical attack and thermal shock□ ISO/TC 107 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▷ISO/TC 107/SC 3 Electrodeposited coatings and related finishes : 발행된 표준 26개, 개발 중인 표준 3개▷ISO/TC 107/SC 4 Hot dip coatings (galvanized, etc.) : 발행된 표준 6개, 개발 중인 표준 0개▷ISO/TC 107/SC 7 Corrosion tests : 발행된 표준 15개, 개발 중인 표준 0개▷ISO/TC 107/SC 8 Chemical conversion coatings : 발행된 표준 6개, 개발 중인 표준 1개▷ISO/TC 107/SC 9 Physical vapor deposition coatings : 발행된 표준 6개, 개발 중인 표준 0개