검색결과
-
[특집] ISO/TC 87 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 1947년 TC1~TC67, 1948년 TC 69, 1949년 TC 70~72, 1972년 TC68, 1950년 TC74, 1951년 TC76, 1952년 TC77, 1953년 TC79, TC81, 1955년 TC82, TC83, 1956년 TC84, TC85 등이다.ISO/TC 87 코르크(Cork)와 관련된 기술위원회는 ISO/TC 86과 마찬가지로 1957년 결성됐다. 사무국은 포르투갈 품질관리위원회(Instituto Português da Qualidade, IPQ)에서 맡고 있다.위원회는 밀턴 게데스(Mr Milton Guedes)가 책임진다. 현재 의장은 장 미셸 리불레(M Jean-Michel Riboulet)로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 모니카 이비도(Ms Monica Ibido), ISO 편집 관리자는 빈센조 바추키(M Vincenzo Bazzucchi) 등으로 조사됐다.범위는 코르크 분야, 원료 및 크로크로 제조 및 준비된 제품의 표준화다. 현재 ISO/TC 87 사무국과 관련해 발행된 표준은 41개며 ISO/TC 87 사무국과 관련해 개발 중인 표준은 8개다. 참여하고 있는 회원은 7명, 참관 회원은 14명이다.□ ISO/TC 87 사무국의 직접 책임 하에 발행된 표준 41개 중 15개 목록▲ISO 633:2019 Cork — Vocabulary▲ISO 1215:2015 Virgin cork, raw reproduction cork, ramassage, gleanings, burnt cork, corkwaste, boiled cork pieces and raw corkwaste — Definitions and packaging▲ISO 1216:2017 Boiled reproduction cork — Grading, classification and packing▲ISO 1997:2018 Granulated cork and cork powder — Classification, properties and packing▲ISO 2030:2018 Granulated cork — Size analysis by mechanical sieving▲ISO 2031:2015 Granulated cork — Determination of apparent bulk density▲ISO 2066:2004 Resilient floor coverings — Determination of moisture content of agglomerated composition cork▲ISO 2067:2019 Granulated cork, broken cork and crushed cork — Sampling for the determination of moisture content▲ISO 2190:2016 Granulated cork — Determination of moisture content▲ISO 2219:2010 Thermal insulation products for buildings — Factory-made products of expanded cork (ICB) — Specification▲ISO 2385:2020 Packed cork — Virgin cork, raw reproduction cork, burnt cork, boiled reproduction cork and raw cork waste — Sampling to determine moisture content▲ISO 2386:2019 Packed cork — Virgin cork, raw reproduction cork, burnt cork, boiled reproduction cork and raw cork waste — Determination of moisture content▲ISO 2509:1989 Sound-absorbing expanded pure agglomerated cork in tiles▲ISO 3810:1987 Floor tiles of agglomerated cork — Methods of test▲ISO 3850:2004 Resilient floor coverings - Determination of apparent density of composition cork□ ISO/TC 87 사무국의 직접 책임 하에 개발 중인 표준 8개 목록▲ISO/AWI 9727-1 Cylindrical cork stoppers — Physical tests — Part 1: Determination of dimensions▲ISO/AWI 9727-2 Cylindrical cork stoppers — Physical tests — Part 2: Determination of mass and apparent density for agglomerated cork stoppers▲ISO/AWI 9727-3 Cylindrical cork stoppers — Physical tests — Part 3: Determination of humidity content▲ISO/AWI 9727-4 Cylindrical cork stoppers — Physical tests — Part 4: Determination of dimensional recovery after compression▲ISO/AWI 9727-5 Cylindrical cork stoppers — Physical tests — Part 5: Determination of extraction force▲ISO/AWI 9727-6 Cylindrical cork stoppers — Physical tests — Part 6: Determination of liquid tightness▲ISO/AWI 9727-7 Cylindrical cork stoppers — Physical tests — Part 7: Determination of dust content▲ISO/DIS 20752 Cork stoppers — Determination of releasable 2, 4, 6-trichloroanisol (TCA)
-
[특집] ISO/TC 83 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회는 1947년 구성된 TC1~TC67, 1948년 구성된 TC 69, 1949년에 구성된 TC 70~72, 1972년 구성된 TC68, 1950년 구성된 TC74, 1951년 구성된 TC76, 1952년 구성된 TC77, 1953년에 구성된 TC79, TC81 등이다.ISO/TC 83 스포츠 및 기타 레크레이션 시설·장비(Sports and other recreational facilities and equipment)와 관련된 기술위원회는 TC82와 마찬가지로 1955년 결성됐다.사무국은 독일표준협회(Deutsches Institut für Normung, DIN)에서 맡고 있다. 위원회는 레티시아 데 안다 곤살레스(Mrs Dipl.-Kffr Leticia de Anda González)이 책임진다. 현재 의장은 마이클 하우스(Mr Michael Haus)로 임기는 2028년까지다.ISO 기술 프로그램 관리자는 샐리 스윙우드(Ms Sally Swingewood), ISO 편집 관리자는 이본 첸(Mrs Yvonne Chen) 등으로 조사됐다.범위는 전통적인 것을 포함한 물리적, e-스포츠를 포함한 가상 스포츠를 위한 관련 테스트 장비를 포함하는 테스트뿐만 아니라 용어, 치수, 허용 오차, 기능, 운영, 유지 관리, 훈련, 성능 및 안전 요구 사항의 표준화다.다음에 대한 표준의 개발 및 유지 관리는 포함된다. △스포츠 및 레크리에이션 시설 △레크리에이션 목적을 위한 장비를 포함한 장비로 로프 코스, 놀이터, 공기주입식 기구, 워터 슬라이드, 캠핑 텐트, 레크리에이션 트레일, 수상 레저 용품, 침낭, 아이스하키, 스노우 스포츠, 스포츠 장비 및 시설 등이 해당된다. 다만 ISO/TC 254 범위 내에서 국제표준이 적용되는 놀이기구 및 놀이 장치는 제외된다.현재 ISO/TC 83 사무국과 관련해 발행된 표준은 97개며 이 중 ISO/TC 83 사무국의 직접적인 책임 하에 개발된 표준은 35개다.ISO/TC 83 사무국과 관련해 개발 중인 표준은 21개며 이중 직접적인 책임 하에 개발 중인 표준은 14개다. 참여하고 있는 회원은 35명, 참관 회원은 18명이다.□ ISO/TC 83 사무국의 직접 책임 하에 발행된 표준 35개 중 15개 목록▲ISO 4980:2023 Benefit-risk assessment for sports and recreational facilities, activities and equipment▲ISO 5912:2020 Camping tents — Requirements and test methods▲ISO 7152:2023 Camping tents and caravan awnings — Vocabulary▲ISO 8936:2017 Awnings for leisure accommodation vehicles — Requirements and test methods▲ISO 11416:1995 Tennis rackets — Racket components and physical parameters▲ISO 19202-1:2017 Summer toboggan runs — Part 1: Safety requirements and test methods▲ISO 19202-2:2017 Summer toboggan runs — Part 2: Safety requirements for operation▲ISO/TR 20183:2015 Sports and other recreational facilities and equipment — Injury and safety definitions and thresholds — Guidelines for their inclusion in standards▲ISO 20187-1:2022 Inflatable play equipment — Part 1: Safety requirements and test methods▲ISO 20187-2:2022 Inflatable play equipment — Part 2: Additional safety requirements for inflatable bouncing pillows intended for permanent installation▲ISO 20187-3:2022 Inflatable play equipment — Part 3: Additional safety requirements and test methods for snappies▲ISO 20380:2017 Public swimming pools — Computer vision systems for the detection of drowning accidents in swimming pools — Safety requirements and test methods▲ISO 20957-1:2013 Stationary training equipment — Part 1: General safety requirements and test methods▲ISO 20957-2:2020 Stationary training equipment — Part 2: Strength training equipment, additional specific safety requirements and test methods▲ISO 20957-4:2016 Stationary training equipment — Part 4: Strength training benches, additional specific safety requirements and test methods□ ISO/TC 83 사무국의 직접 책임 하에 개발중인 표준 14개 목록▲ISO/AWI 20288 Public Swimming Pools — Systems recognizing involuntarily submersion of humans in managed aquatic facilities▲ISO/CD 20957-1 Stationary training equipment — Part 1: General safety requirements and test methods▲ISO/DIS 20957-2 Stationary training equipment — Part 2: Strength training equipment — Additional specific safety requirements and test methods▲ISO/DIS 20957-7 Stationary training equipment — Part 7: Rowing equipment — Additional specific safety requirements and test methods▲ISO 23537-2 Requirements for sleeping bags — Part 2: Fabric and material properties▲ISO/DTS 24665 Playground and recreational areas — Framework for the competence of playground inspectors and playground maintenance technicians▲ISO/TR 24666 Sports and recreational facilities — Probes for entrapment/entanglement on playground equipment — Collection of data▲ISO/DIS 25649-1 Floating leisure articles for use on and in the water — Part 1: Classification, materials, general requirements and test methods▲ISO/DIS 25649-2 Floating leisure articles for use on and in the water — Part 2: Consumer information▲ISO/DIS 25649-3 Floating leisure articles for use on and in the water — Part 3: Additional specific safety requirements and test methods for Class A devices▲ISO/DIS 25649-4 Floating leisure articles for use on and in the water — Part 4: Additional specific safety requirements and test methods for Class B devices▲ISO/DIS 25649-5 Floating leisure articles for use on and in the water — Part 5: Additional specific safety requirements and test methods for Class C devices▲ISO/DIS 25649-6 Floating leisure articles for use on and in the water — Part 6: Additional specific safety requirements and test methods for Class D devices▲ISO/DIS 25649-7 Floating leisure articles for use on and in the water — Part 7: Additional specific safety requirements and test methods for Class E devices□ ISO/TC 83 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 83/SC 4 Snowsports equipment ; 발행된 표준 47개, 개발 중인 표준 2개▲ISO/TC 83/SC 5 Ice hockey equipment and facilities ; 발행된 표준 5개, 개발 중인 표준 5개▲ISO/TC 83/SC 6 Martial arts ; 발행된 표준 10개, 개발 중인 표준 0개
-
[특집] ISO/TC 76 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 76 의료 및 제약 사용을 위한 수혈, 주입, 주사, 혈액 가공 장비(Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use)와 관련된 기술위원회는 1951년 결성됐다.이미 다룬 기술위원회는 1947년 구성된 TC1~TC67, 1948년 구성된 TC 69, 1949년에 구성된 TC 70~72, 1972년 구성된 TC68, 1950년 구성된 TC74 등이다.사무국은 독일표준화기구(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다. 위원회는 마가렛 보레쉬(Mrs Dipl.-Ing Margarethe Boresch)가 책임진다. 현재 의장은 마크 폰 파울로프스키(Mr Marc von Pawlowski)로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 패트리샤 쿡(Mme Patricia Cook), ISO 편집 관리자는 크리스틴 간손레(Ms Christelle Gansonre) 등으로 조사됐다.범위는 수혈용 병 및 백, 주사약 병과 앰블, 유리 실린더, 카트리지, 사전 충전형 주사기와 같은 용기의 표준화다. 기부 세트, 비전기식 휴대용 주입 장치, 채혈 시스템 등과 같은 응용시스템의 표준화, 혈액은행에 있는 수혈, 주입, 주사, 혈액 가공장비를 위한 부속품의 표준화 등도 포함된다.또한 장비를 위한 용어, 요구사항, 테스트 방법에 대한 표준화다. 재료 및 엘라스토머 마감, 캡 및 포트, 피펫 등과 같은 부품의 품질 및 성능에 대한 사양과 테스트 방법에 대한 표준화도 포함된다. 기본 포장 재료에 대한 품질 관리 시스템의 표준화도 범위에 속한다.다만 ISO/TC 84가 적용되는 의약품, 사전 충전되지 않은 주사기 및 바늘, 혈관 내 카테터의 자가 투여용 계량 장치 및 공급품의 성능 요구사항은 제외된다. ISO/TC 121이 적용되는 호흡기 치료용 기기, ISO/TC 106이 적용되는 치과용 카트리지 주사기 홀더 등도 포함되지 않는다.현재 ISO/TC 76 사무국의 직접적인 책임 하에 발행된 표준은 84개며 개발 중에 있는 표준은 16개, 참여하고 있는 회원은 23명, 참관 회원은 23명이다.□ ISO/TC 76 사무국의 직접 책임 하에 발행된 표준 10개 목록▲ISO 719:2020 Glass — Hydrolytic resistance of glass grains at 98 °C — Method of test and classification▲ISO 720:2020 Glass — Hydrolytic resistance of glass grains at 121 °C — Method of test and classification▲ISO 1135-3:2016 Transfusion equipment for medical use — Part 3: Blood-taking sets for single use▲ISO 1135-4:2015 Transfusion equipment for medical use — Part 4: Transfusion sets for single use, gravity feed▲ISO 1135-5:2015 Transfusion equipment for medical use — Part 5: Transfusion sets for single use with pressure infusion apparatus▲ISO 3749:2022 Glass syringes — Determination of extractable tungsten▲ISO 3826-1:2019 Plastics collapsible containers for human blood and blood components — Part 1: Conventional containers▲ISO 3826-1:2019/Amd 1:2023 Plastics collapsible containers for human blood and blood components — Part 1: Conventional containers — Amendment 1▲ISO 3826-2:2008 Plastics collapsible containers for human blood and blood components — Part 2: Graphical symbols for use on labels and instruction leaflets▲ISO 3826-3:2006 Plastics collapsible containers for human blood and blood components — Part 3: Blood bag systems with integrated features□ ISO/TC 76 사무국의 직접 책임 하에 개발 중인 표준 10개 목록▲ISO/CD 1135-4 Transfusion equipment for medical use — Part 4: Transfusion sets for single use, gravity feed▲ISO/CD 1135-5 Transfusion equipment for medical use — Part 5: Transfusion sets for single use with pressure infusion apparatus▲ISO/DIS 4802-1 Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification▲ISO/DIS 4802-2 Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification▲ISO/CD 8417 Risk management of particulate contamination for devices with intravascular access▲ISO/AWI 8536-6 Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles▲ISO/AWI 8536-13 Infusion equipment for medical use — Part 13: Graduated flow regulators for single use with fluid contact▲ISO/AWI 8871-5 Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 5: Functional requirements and testing▲ISO/AWI 11040-3 Prefilled syringes — Part 3: Seals for dental local anaesthetic cartridges▲ISO/DIS 11040-4 Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
-
[특집] ISO/TC 67 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 67 저탄소에너지를 포함한 석유 및 가스 산업(Oil and gas industries including lower carbon energy)와 관련된 기술위원회는 TC1, TC2, TC4~TC6, TC8, TC10~TC12, TC14, TC17~TC22, TC24~31, TC33~TC39, TC41~TC48, TC51, TC52, TC54, TC58~TC61, TC63과 동일하게 1947년 구성됐다.사무국은 네덜란드표준화기구(Royal Netherlands Standardization Institute, NEN)에서 맡고 있다. 위원회는 프랑수아즈 반 덴 브링크(Mrs Françoise van den Brink)가 책임진다. 의장은 필립 스메들리(Mr Philip Smedley)으로 임기는 2025년까지다.ISO 기술 프로그램 관리자는 키르시 실란더-반 후넨(Mrs Kirsi Silander-van Hunen), ISO 편집 관리자는 크리스틴 간손레(Ms Christelle Gansonre) 등으로 조사됐다. 범위는 석유화학 및 저탄소 에너지 활동을 포함한 석유 및 가스 산업 분야의 표준화다.□ 제외 사항▲ISO/TC 28에서 다루는 천연 또는 합성 소스의 석유 및 관련 제품, 연료 및 윤활유와 관련된 측면▲ISO/TC 193에서 다루는 천연 가스 관련 측면▲ISO/TC 197에서 다루는 수소 기술과 관련된 측면▲ISO/TC 255에서 다루는 바이오가스 관련 측면▲ISO/TC 265에서 다루는 이산화탄소 포집, 운송 및 지질학적 저장과 관련된 측면▲IMO 요구 사항(ISO/TC 8)이 적용되는 해양 구조물의 측면현재 ISO/TC 67 사무국의 직접적인 책임하에 발행된 표준은 32개며 ISO/TC 67 사무국과 관련해 발행된 표준은 231개다.ISO/TC 67 사무국의 직접적인 책임하에 개발되고 있는 표준은 4개며 ISO/TC 67 사무국과 관련해 개발되고 있는 표준은 44개다. 참여하고 있는 회원은 34명, 참관 회원은 28명이다.□ ISO/TC 67 사무국의 직접적인 책임하에 발행된 표준 32개 중 15개 목록▲ISO/TS 3250:2021 Petroleum, petrochemical and natural gas industries — Calculation and reporting production efficiency in the operating phase▲ISO/TR 12489:2013 Petroleum, petrochemical and natural gas industries — Reliability modelling and calculation of safety systems▲ISO 13085:2014 Petroleum and natural gas industries — Aluminium alloy pipe for use as tubing for wells▲ISO 13879:1999 Petroleum and natural gas industries — Content and drafting of a functional specification▲ISO 13880:1999 Petroleum and natural gas industries — Content and drafting of a technical specification▲ISO/TR 13881:2000 Petroleum and natural gas industries — Classification and conformity assessment of products, processes and services▲ISO 14224:2016 Petroleum, petrochemical and natural gas industries — Collection and exchange of reliability and maintenance data for equipment▲ISO 15156-1:2020 Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 1: General principles for selection of cracking-resistant materials▲ISO 15156-2:2020 Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons▲ISO 15156-3:2020 Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys▲ISO 15546:2011 Petroleum and natural gas industries — Aluminium alloy drill pipe▲ISO 15663:2021 Petroleum, petrochemical and natural gas industries — Life cycle costing▲ISO 16961:2015 Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks▲ISO 17348:2016 Petroleum and natural gas industries — Materials selection for high content CO2 for casing, tubing and downhole equipment▲ISO 17349:2016 Petroleum and natural gas industries — Offshore platforms handling streams with high content of CO2 at high pressures□ ISO/TC 67 사무국의 직접적인 책임하에 개발중인 표준 4개 목록▲ISO/DIS 3845 Oil and gas industries including lower carbon energy — Full ring ovalization test method for the evaluation of the cracking resistance of steel line pipe in sour service▲ISO/DIS 16961 Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks▲ISO/DIS 24201 Petroleum, petrochemical and natural gas industries — Bulk material for offshore projects — Tertiary outfitting structures▲ISO/FDIS 24202 Oil and gas industries including lower carbon energy — Bulk material for offshore projects — Monorail beam and padeye□ ISO/TC 61 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 67/SC 2 Pipeline transportation systems ; 발행된 표준 31개, 개발 중인 표준 18개▲ISO/TC 67/SC 3 Drilling and completion fluids, well cements and treatment fluids ; 발행된 표준 28개, 개발 중인 표준 0개▲ISO/TC 67/SC 4 Drilling, production and injection equipment ; 발행된 표준 55개, 개발 중인 표준 2개▲ISO/TC 67/SC 5 Casing, tubing and drill pipe ; 발행된 표준 12개, 개발 중인 표준 2개▲ISO/TC 67/SC 6 Process equipment, piping, systems, and related safety ; 발행된 표준 34개, 개발 중인 표준 5개▲ISO/TC 67/SC 7 Offshore structures ; 발행된 표준 22개, 개발 중인 표준 11개▲ISO/TC 67/SC 8 Arctic operations ; 발행된 표준 6개, 개발 중인 표준 0개▲ISO/TC 67/SC 9 Production, transport and storage facilities for cryogenic liquefied gases ; 발행된 표준 11개, 개발 중인 표준 2개
-
[특집] ISO/TC 60 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 60 기어(Gears)와 관련된 기술위원회는 TC1, TC2, TC4~TC6, TC8, TC10~TC12, TC14, TC17~TC22, TC24~31, TC33~TC39, TC41~TC48, TC51, TC52, TC54, TC58, TC59와 동일하게 1947년 구성됐다.사무국은 미국표준협회(American National Standards Institute, ANSI)에서 맡고 있다. 위원회는 아미르 아바탈레브(Mr Amir Aboutaleb)가 책임진다. 의장은 테란스 클라베스(Mr Terrance Klaves)으로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 츄안유 쏘우(Ms Chuanyu Zou), ISO 편집 관리자는 앤 기엣(Ms Anne Guiet) 등으로 조사됐다. 범위는 제조 및 제어를 위한 용어, 공칭 치수, 공차 및 도구를 포함한 기어 분야의 표준화다.현재 ISO/TC 60 사무국의 직접적인 책임하에 있는 발행된 표준은 21개며 ISO/TC 60 사무국과 관련해 발행된 표준은 61개다.ISO/TC 60 사무국의 직접적인 책임하에 개발 중인 표준은 3개며 ISO/TC 60 사무국과 관련해 개발 중인 표준은 14개다. 참여하고 있는 회원은 14명, 참관 회원은 21명이다.□ ISO/TC 60 사무국의 직접 책임하에 발행된 표준 21개 중 15개 목록▲ISO 53:1998 Cylindrical gears for general and heavy engineering — Standard basic rack tooth profile▲ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering — Modules▲ISO 677:1976 Straight bevel gears for general engineering and heavy engineering — Basic rack▲ISO 678:1976 Straight bevel gears for general engineering and heavy engineering — Modules and diametral pitches▲ISO 1328-1:2013 Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth▲ISO 1328-2:2020 Cylindrical gears — ISO system of flank tolerance classification — Part 2: Definitions and allowable values of double flank radial composite deviations▲ISO 8579-1:2002 Acceptance code for gear units — Part 1: Test code for airborne sound▲ISO/TR 10064-1:2019 Code of inspection practice — Part 1: Measurement of cylindrical gear tooth flanks▲ISO/TR 10064-2:1996 Code of inspection practice — Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash▲ISO/TR 10064-2:1996/Cor 1:2001 Code of inspection practice — Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash — Technical Corrigendum 1▲ISO/TR 10064-2:1996/Cor 2:2006 Code of inspection practice — Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash — Technical Corrigendum 2▲ISO/TR 10064-3:1996 Code of inspection practice — Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes▲ISO/TR 10064-3:1996/Cor 1:2006 Code of inspection practice — Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes — Technical Corrigendum 1▲ISO/TR 10064-4:1998 Code of inspection practice — Part 4: Recommendations relative to surface texture and tooth contact pattern checking▲ISO/TR 10064-4:1998/Cor 1:2006 Code of inspection practice — Part 4: Recommendations relative to surface texture and tooth contact pattern checking — Technical Corrigendum 1□ ISO/TC 60 사무국의 직접 책임하에 개발 중인 표준 3개 목록▲ISO/CD TR 10064-2.2 Code of inspection practice — Part 2: Double Flank Radial Composite Measurements▲ISO/CD 21771-2 Cylindrical involute gears and gear pairs — Part 2 — Part 2: Calculation and Measurement of Tooth Thickness and Backlash▲IEC/CD 61400-4 Wind turbines — Part 4: Design requirements for wind turbine gearboxes□ ISO/TC 60 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 60/SC 1 Nomenclature and wormgearing ; 발행된 표준 12개, 개발 중인 표준 2개▲ISO/TC 60/SC 2 Gear capacity calculation ; 발행된 표준 28개, 개발 중인 표준 9개
-
[특집] ISO/TC 52 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 52 경량 게이지 금속 용기(Light gauge metal containers)와 관련 기술위원회는 TC1, TC2, TC4~TC6, TC8, TC10~TC12, TC14, TC17~TC22, TC24~31, TC33~TC39, TC41~TC48, TC51과 동일하게 1947년 구성됐다.사무국은 중국국가표준화관리위원회(Standardization Administration of China, SAC)에서 맡고 있다. 위원회는 카이 츄(Mr Kai QIU)이 책임진다. 의장은 티강 정(Mr Tiegang Zheng)으로 임기는 2025년까지다.ISO 기술 프로그램 관리자는 스테판 소바(M Stéphane Sauvage), ISO 편집 관리자는 니콜라 페루(Ms Nicola Perou) 등으로 조사됐다.범위는 공칭 재료 두께가 0.49mm와 같거나 그 이상인 경량 게이지 금속 용기 분야의 표준화다. 현재 ISO/TC 52 사무국의 직접적인 책임하에 있는 발행된 표준은 11개며 ISO/TC 52 사무국의 직접적인 책임하에 개발 중인 표준은 1개다. 참여하고 있는 회원은 11명, 참관 회원은 26명이다.□ ISO/TC 52 사무국의 직접적인 책임하에 있는 표준 11개 목록▲ISO 90-1:1997 Light gauge metal containers — Definitions and determination of dimensions and capacities — Part 1: Open-top cans▲ISO 90-2:1997 Light gauge metal containers — Definitions and determination of dimensions and capacities — Part 2: General use containers▲ISO 90-3:2000 Light gauge metal containers — Definitions and determination of dimensions and capacities — Part 3: Aerosol cans▲ISO 1361:1997 Light-gauge metal containers — Round open-top cans — Internal diameters▲ISO 5099:2022 Light gauge metal containers — Easy-open ends and peel-off ends — Classification and dimensions▲ISO 10653:1993 Light-gauge metal containers — Round open-top cans — Cans defined by their nominal gross lidded capacities▲ISO 10654:1993 Light-gauge metal containers — Round open-top cans — Cans for liquid products with added gas, defined by their nominal filling volumes▲ISO/TR 11761:1992 Light-gauge metal containers — Round open-top cans — Classification of can sizes by construction type▲ISO/TR 11762:1992 Light-gauge metal containers — Round open-top cans for liquid products with added gas — Classification of can sizes by construction type▲ISO/TS 21985:2022 Light gauge metal containers — Non-refillable LPG cartridges — General requirements▲ISO 24021-1:2022 Light gauge metal containers — Vocabulary and classification — Part 1: Open-top cans and ends□ ISO/TC 52 사무국의 직접적인 책임하에 개발중인 표준 1개 목록▲ISO/DIS 24021-2 Light gauge metal containers — Vocabulary and classification — Part 2: General cans
-
[특집] ISO/TC 48 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 48 실험실 장비(Laboratory equipment) 관련 기술위원회는 TC1, TC2, TC4~TC6, TC8, TC10~TC12, TC14, TC17~TC22, TC24~31, TC33~TC39, TC41~TC47과 동일하게 1947년 구성됐다.사무국은 독일표준화연구소(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다. 위원회는 제니 블룸(Mrs Dipl.-Phys Jenny Blum)이 책임진다. 의장은 찰스 파스칼(Mr Charles Pascall)으로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 이사벨 베가(Ms Isabelle Vega), ISO 편집 관리자는 아룬 ABY 파라에카틸(Mr Arun ABY Paraecattil) 등으로 조사됐다.범위는 원리와 구성 재료, 성능, 치수 및 테스트는 물론 이와 관련하여 사용되는 용어 및 정의와 관련한 실험 목적을 위한 장비나 가구의 표준화다.■ 다음 사항도 표준화 범위에 속한다. ▶ 실험실 용품, 장치, 전기 및 비전기 기기를 포함한 실험실 기기의 표준화▶ 벤치, 전문가 좌석, 실험실 보관 장치, 매체 공급 장치, 장금장치, 피팅 및 연기 찬장이 포함된 실험실 가구의 표준화■ 다음 사항은 ISO/TC 48 표준화 범위에서 제외된다. ▶ 전기 안전 및 전자파 적합성 뿐 아니라 개인의 안전 측면을 위해 구성된 기구 및 장비는 ISO/TC 48 범위에서 제외됨▶ ISO/TC 136의 범위에 포함된 일반 가구의 표준화는 제외됨.▶ 실험실 장비 통합의 표준화는 ISO/TC 48의 범위에서 제외됨.현재 ISO/TC 4의 직접적인 책임하에 개발된 표준은 83개, ISO/TC 48과 관련해 발행된 ISO 표준은 89개며 ISO/TC 48과 관련해 개발 중인 표준은 5개다. 참여하고 있는 회원은 19명, 참관 회원은 26명이다.□ ISO/TC 48 사무국의 직접적인 책임하에 발행된 표준 83개 중 15개 목록▲ISO 383:1976 Laboratory glassware — Interchangeable conical ground joints▲ISO 384:2015 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments▲ISO 385:2005 Laboratory glassware — Burettes▲ISO 641:1975 Laboratory glassware — Interchangeable spherical ground joints▲ISO 648:2008 Laboratory glassware — Single-volume pipettes▲ISO 695:1991 Glass — Resistance to attack by a boiling aqueous solution of mixed alkali — Method of test and classification▲ISO 718:1990 Laboratory glassware — Thermal shock and thermal shock endurance — Test methods▲ISO 835:2007 Laboratory glassware — Graduated pipettes▲ISO 1042:1998 Laboratory glassware — One-mark volumetric flasks▲ISO 1769:1975 Laboratory glassware — Pipettes — Colour coding▲ISO 1772:1975 Laboratory crucibles in porcelain and silica▲ISO 1773:1997 Laboratory glassware — Narrow-necked boiling flasks▲ISO 1775:1975 Porcelain laboratory apparatus — Requirements and methods of test▲ISO 1776:1985 Glass — Resistance to attack by hydrochloric acid at 100 degrees C — Flame emission or flame atomic absorption spectrometric method▲ISO 3585:1998 Borosilicate glass 3.3 — Properties□ ISO/TC 48 사무국의 직접적인 책임하에 개발 중인 표준 5개 목록▲ISO/CD TR 6037 Automated liquid handling systems – Uncertainty of the measurement procedures▲ISO/CD TS 6417 Microfluidic pumps — Symbols and performance communication▲ISO/DIS 8655-10 Piston-operated volumetric apparatus — Part 10: User guidance and requirements for competence, training, and POVA suitability▲ISO/FDIS 10991 Microfluidics — Vocabulary▲ISO 13132 Laboratory glassware — Petri dishes□ ISO/TC 48 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 48/SC 4 Density measuring instruments ; 발행된 표준 6개, 개발 중인 표준 0개
-
[미국] 미국 특허 신규성·진보성을 조사하는 방법미국 특허 출원 전에 신규성·진보성를 조사하기 위해서는 발명이 속하는 기술 분야의 전문가를 선택해야 한다. 조사자가 선택되면 발명의 특징을 알 수 있는 모든 정보를 조사자에게 제공한다. 특히 발명자가 사전에 알고 있는 특허나 선행기술이 있다면 해당 내용을 조사자에게 제공한다. 정보는 많을수록 조사의 정확성 및 효율이 높기 때문이다.선택된 조사자는 특허청의 출원, 컴퓨터화된 문서 및 외국 특허에 대해 조사한다. 특허청의 출원을 조사하는 경우에는 특허청에서 제공하는 분류서(Manual of Classification)을 참조하여 발명이 속한 분류를 알아낸다.해당 분류가 파악되면 특정 분류에 포함된 모든 특허를 검토한다. 생명공학, 컴퓨터 소프트웨어와 같이 빠르게 변화하는 기술영역에서는 적절한 데이터베이스를 가진 컴퓨터 시스템을 활용해 조사하는 것이 좋다.이와 같이, 발명, 매뉴얼, 컴퓨터, 조합 검색 등 다양한 방법으로 조사할 수 있다. 조사를 결정하기 전에 발명자와 비용과 방법에 대해 협의하는 것이 유리하다.
-
[특집] ISO/TC 33 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 33 내화 벽돌(Refractories) 관련 기술위원회는 TC1, TC2, TC4~TC6, TC8, TC10~TC12, TC14, TC17~TC22, TC24~31과 동일하게 1947년 구성됐다.사무국은 영국표준협회(British Standards Institution, BSI)에서 맡고 있다. 위원회는 데이드르 푸리( Miss Deidre Fourie)가 책임지고 있다. 의장은 올라프 크라우스 교수(Mr Prof. Dr Olaf Krause)로 임기는 2025년까지다.ISO 기술 프로그램 관리자는 스테판 소바쥬(M Stéphane Sauvage), ISO 편집 관리자는아룬 아비 파라에카틸(Mr Arun ABY Paraecattil) 등이다.범위는 내화물 산업의 원료 및 제품의 표준뿐 아니라 원료 및 제품 특성의 표준화다. 현재 ISO/TC 33의 직접적인 책임하에 발행된 표준은 93개며 ISO/TC 31의 직접적인 책임하에 개발중인 표준은 7개다. 참여하고 있는 회원은 15명, 참관 회원은 22명이다.□ ISO/TC 33 사무국의 직접적인 책임하에 발행 된 표준 93개중 10개 목록▲ISO 528:1983 Refractory products — Determination of pyrometric cone equivalent (refractoriness)▲ISO 836:2001 Terminology for refractories▲ISO 1146:1988 Pyrometric reference cones for laboratory use — Specification▲ISO 1893:2007 Refractory products — Determination of refractoriness under load — Differential method with rising temperature▲ISO 1927-1:2012 Monolithic (unshaped) refractory products — Part 1: Introduction and classification▲ISO 1927-2:2012 Monolithic (unshaped) refractory products — Part 2: Sampling for testing▲ISO 1927-3:2012 Monolithic (unshaped) refractory products — Part 3: Characterization as received▲ISO 1927-4:2012 Monolithic (unshaped) refractory products — Part 4: Determination of consistency of castables▲ISO 1927-5:2012 Monolithic (unshaped) refractory products — Part 5: Preparation and treatment of test pieces▲ISO 1927-6:2012 Monolithic (unshaped) refractory products — Part 6: Measurement of physical properties□ ISO/TC 33 사무국의 직접적인 책임하에 개발중인 표준 7개 목록▲ISO/AWI 14719 Chemical analysis of refractory material glass and glazes — Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline▲ISO/AWI 16206 Phase quantitative analysis of residual quartz in silica bricks--X-ray diffraction method▲ISO/AWI 20182 Refractory test-piece preparation — Gunning refractory panels by the pneumatic-nozzle mixing type guns▲ISO/CD 21068-1 Chemical analysis of raw materials and refractory products containing silicon carbide, silicon nitride, silicon oxynitride and sialon — Part 1: General information and sample preparation▲ISO/CD 21068-2 Chemical analysis of raw materials and refractory products containing silicon carbide, silicon nitride, silicon oxynitride and sialon — Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon▲ISO/CD 21068-3 Chemical analysis of raw materials and refractory products containing silicon carbide, silicon nitride, silicon oxynitride and sialon — Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents▲ISO/CD 21068-4 Chemical analysis of raw materials and refractory products containing silicon carbide, silicon nitride, silicon oxynitride and sialon — Part 4: XRD methods
-
[특집] ISO/TC 25 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 25 주철과 선철(Cast irons and pig irons) 관련 기술위원회는 TC1, TC2, TC4~TC6, TC8, TC10~TC12, TC14, TC17~TC22, TC24와 같이 1947년에 구성됐다.사무국 영국 표준화기구(British Standards Institution,BSI)에서 맡고 있다. 위원회는 줄리 웰러(Ms Julie Weller)가 책임지고 있으며 의장은 펨 머렐(Ms Pam Murrell)로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 스테판 소바쥬(M Stéphane Sauvage), ISO 편집 관리자는 니콜라 페루(Ms Nicola Perou) 등이다.범위는 모든 유형의 주철과 모든 유형의 선철 분야의 표준화이다. 현재 ISO/TC 25의 직접적인 책임하에 개발된 ISO 표준은 17개며 개발 중인 표준은 1개다. 참여하고 있는 회원은 18명, 참관 회원은 30명이다.□ ISO/TC 25 사무국의 직접적인 책임하에 발행된 ISO 표준 17개 목록▲ISO 185:2020 Grey cast irons — Classification▲ISO 945-1:2019 Microstructure of cast irons — Part 1: Graphite classification by visual analysis▲ISO/TR 945-2:2011 Microstructure of cast irons — Part 2: Graphite classification by image analysis▲ISO/TR 945-3:2016 Microstructure of cast irons — Part 3: Matrix structures▲ISO 945-4:2019 Microstructure of cast irons — Part 4: Test method for evaluating nodularity in spheroidal graphite cast irons▲ISO 1083:2018 Spheroidal graphite cast irons — Classification▲ISO 2892:2007 Austenitic cast irons — Classification▲ISO 2892:2007/Cor 1:2009 Austenitic cast irons — Classification — Technical Corrigendum 1▲ISO 5922:2005 Malleable cast iron▲ISO 9147:1987 Pig-irons — Definition and classification▲ISO/TR 10809-1:2009 Cast irons — Part 1: Materials and properties for design▲ISO/TR 10809-2:2011 Cast irons — Part 2: Welding▲ISO/TR 15931:2004 Designation system for cast irons and pig irons▲ISO/TR 16078:2013 Cast Irons - Classification and designation of casting imperfections▲ISO 16112:2017 Compacted (vermicular) graphite cast irons — Classification▲ISO 17804:2020 Founding — Ausferritic spheroidal graphite cast irons — Classification▲ISO 21988:2006 Abrasion-resistant cast irons — Classification□ ISO/TC 25 사무국의 직접적인 책임하에 개발중인 ISO 표준 1개 목록▲ISO/DTR 10809-1 Cast irons — Part 1: Materials and properties for design