검색결과
-
[특집-ISO/IEC JTC 1/SC 17 활동] 28. Result of voting on SR ballot for ISO/IEC 10373-32023년 12월04일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Result of voting on SR ballot for ISO/IEC 10373-3' 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동기술위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서인 'Result of voting on SR ballot for ISO/IEC 10373-3'는 Identification cards — Test methods — Part 3: Integrated circuit cards with contacts and related interface devices에 관한 투표 및 결과에 대한 내용을 포함하고 있다.2023년 7월15일~12월2일 동안 투표 절차가 진행됐다. 다음과 같은 항목에 대해 회원국들로부터 의견을 물었다. 투표 항목은 △Confirm △Revise/Amend △Withdraw △Abstain lack of consensus △Abstain lack of national expert input △Stabilize △Q.2 △Q.3 △Q.4 △Q.5 △Q.6 등 총 11개다. 구체적인 질문 내용은 다음과 같다.▷ Q.1 Recommended action▷ Q.2 Has this International Standard been adopted or is it intended to be adopted in the future as a national standard or other publication?▷ Q.3 Is the national publication identical to the International Standard or was it modified?▷ Q.4 If this International Standard has not been nationally adopted, is it applied or used in your country without national adoption or are products/processes/services used in your country based on this standard?▷ Q.5 Is this International Standard, or its national adoption, referenced in regulations in your country?▷ Q.6 If the committee decides to revise or amend, do you propose an expert and/or project leader for the development of that project? - 이하 생략 -
-
[특집-기술위원회] TC 154 - 상업, 산업 및 행정 분야 프로세스, 데이터 요소 및 문서(Processes, data elements and documents in commerce, industry and administration)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다. 기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다. ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다. 1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다. 이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 등이다. △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111, △1964년 TC 112~TC 115, TC 117, △1965년 TC 118, △1966년 TC 119~TC 122, △1967년 TC 123, △1968년 TC 126, TC 127, △1969년 TC 130~136, △1970년 TC 137, TC 138, TC 142, TC 145, △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 등도 포함된다. ISO/TC 154 상업, 산업 및 행정 분야 프로세스, 데이터 요소 및 문서(Processes, data elements and documents in commerce, industry and administration)와 관련된 기술위원회는 1972년 결성됐다. 사무국은 중국 국가표준화관리위원회(国家标准化管理委员会, Standardization Administration of the P. R. C, SAC))에서 맡고 있다. 위원회는 장 지안팡(Mr Jianfang Zhang)이 책임지고 있다. 현재 의장은 유 시(Mr Yu Shi)로 임기는 2024년까지다. ISO 기술 프로그램 관리자는 로라 매튜(Ms Laura Mathew), ISO 편집 관리자는 이본느 헨(Mrs Yvonne Chen) 등으로 조사됐다. 범위는 비즈니스, 행정 프로세스의 국제 표준화 및 등록이다. 또한 개별 조직 내 및 조직간 정보 교환에 사용되는 지원 데이터의 국제 표준화 및 등록, 산업 데이터 분야의 표준화 활동을 지원한다. 다음과 같은 애플리케이션별 메타 표준 개발 및 유지 관리도 포함된다. △프로세스 사양(다른 기술위원회의 개발이 없는 경우) △콘텐츠가 포함된 데이터 사양 △양식 레이아웃(종이/전자) △표준 개발 및 유지 관리 △프로세스 식별(다른 기술위원회의 개발이 없는 경우) △데이터 식별 △EDIFACT 구문의 유지 관리 현재 ISO/TC 154 사무국의 직접적인 책임 하에 발행된 표준은 37개며 SO/TC 154 사무국의 직접적인 책임 하에 개발 중인 표준은 7개다. 참여하고 있는 회원은 17개국, 참관 회원은 28개국이다. □ ISO/TC 154 사무국의 직접적인 책임 하에 발행된 표준 37개 중 15개 목록 ▷ISO 5054-1:2023 Specification for an enterprise canonical model — Part 1: Architecture ▷ISO 6422-1:2010 Layout key for trade documents — Part 1: Paper-based documents ▷ISO 7372:2005 Trade data interchange — Trade data elements directory ▷ISO 8439:1990 Forms design — Basic layout ▷ISO 8440:1986 Location of codes in trade documents ▷ISO 8440:1986/Cor 1:2000 Location of codes in trade documents — Technical Corrigendum 1 ▷ISO 8601-1:2019 Date and time — Representations for information interchange — Part 1: Basic rules ▷ISO 8601-1:2019/Amd 1:2022 Date and time — Representations for information interchange — Part 1: Basic rules — Amendment 1: Technical corrections ▷ISO 8601-2:2019 Date and time — Representations for information interchange — Part 2: Extensions ▷ISO 9735-1:2002 Electronic data interchange for administration, commerce and transport (EDIFACT) — Application level syntax rules (Syntax version number: 4, Syntax release number: 1) — Part 1: Syntax rules common to all parts ▷ISO 9735-2:2002 Electronic data interchange for administration, commerce and transport (EDIFACT) — Application level syntax rules (Syntax version number: 4, Syntax release number: 1) — Part 2: Syntax rules specific to batch EDI ▷ISO 9735-3:2002 Electronic data interchange for administration, commerce and transport (EDIFACT) — Application level syntax rules (Syntax version number: 4, Syntax release number: 1) — Part 3: Syntax rules specific to interactive EDI ▷ISO 9735-4:2002 Electronic data interchange for administration, commerce and transport (EDIFACT) — Application level syntax rules (Syntax version number: 4, Syntax release number: 1) — Part 4: Syntax and service report message for batch EDI (message type — CONTRL) ▷ISO 9735-5:2002 Electronic data interchange for administration, commerce and transport (EDIFACT) — Application level syntax rules (Syntax version number: 4, Syntax release number: 1) — Part 5: Security rules for batch EDI (authenticity, integrity and non-repudiation of origin) ▷ISO 9735-6:2002 Electronic data interchange for administration, commerce and transport (EDIFACT) — Application level syntax rules (Syntax version number: 4, Syntax release number: 1) — Part 6: Secure authentication and acknowledgement message (message type - AUTACK) □ ISO/TC 154 사무국의 직접적인 책임 하에 개발 중인 표준 7개 목록 ▷ISO/WD 5909 Data interchange processes of blockchain based negotiable maritime bill of lading related to e-Commerce platform ▷ISO/AWI 7372 Trade data interchange — Trade data elements directory ▷ISO 8601-2:2019/DAmd 1 Date and time — Representations for information interchange — Part 2: Extensions — Amendment 1 ▷ISO/AWI 14533-3 Processes, data elements and documents in commerce, industry and administration — Long term signature profiles — Part 3: Long term signature profiles for PDF Advanced Electronic Signatures (PAdES) ▷ISO/WD TR 19626-3 Processes, data elements and documents in commerce, industry and administration —Trusted communication platforms for electronic documents — Part 3: Blockchain-based implementation guideline ▷ISO/DIS 20197-1 Buy-Ship-Pay Reference Data Model — Part 1: Business Requirement Specification (BRS) ▷ISO/DIS 23355 Visibility data interchange between logistics information service providers
-
[특집-기술위원회] TC 149 - 자전거(Cycles)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 등이다.△1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111, △1964년 TC 112~TC 115, TC 117, △1965년 TC 118, △1966년 TC 119~TC 122, △1967년 TC 123, △1968년 TC 126, TC 127, △1969년 TC 130~136, △1970년 TC 137, TC 138, TC 142, TC 145 등도 포함된다.ISO/TC 149 자전거(Cycles)와 관련된 기술위원회는 TC 146, TC 147, TC 148과 마찬가지로 1971년 결성됐다. 사무국은 독일 표준화기구(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다.위원회는 마이클 가벨(Mr Michael Gäbel)이 책임지고 있다. 현재 의장은 프랭크 프뤼워(Mr Dipl.-Ing Frank Prüwer)으로 임기는 2025년까지다.ISO 기술 프로그램 관리자는 키르시 실란데르-반 후넨(Mrs Kirsi Silander-van Hunen), ISO 편집 관리자는 빈센조 바주치(M Vincenzo Bazzucchi) 등으로 조사됐다.범위는 성능, 안전, 호환성 및 유지 관리에 대한 용어, 테스트 방법 및 요구 사항을 특별히 참조해 사이클 및 해당 기능, 해당 구성 요소 및 액세서리 분야의 표준화다. 단, 체인 및 치형(tooth profile), 타이어, 림 및 밸브, 장난감 자전거 등은 제외된다.참고로 자건거(Cycle)란 최소한 2개의 바퀴가 있고 특히 페달을 밟거나 페달을 밟을 때 보조 장치를 추가할 수 있는 가능성(예: 전기 모터로 제공)을 통해 해당 차량에 탑승한 사람의 근육 에너지에 의해 전적으로 또는 부분적으로 추진되는 모든 차량을 의미한다. 페달링은 수동 크랭크 사용을 의미하기도 하며 기타 유사한 장치를 말하기도 한다.현재 ISO/TC 149 사무국과 관련해 발행된 표준 29개 중 사무국의 직접적인 책임 하에 발행된 표준은 10개다. 참여하고 있는 회원은 19개국, 참관 회원은 25개국이다.□ ISO/TC 149 사무국의 직접적인 책임 하에 발행된 표준 10개 목록▷ISO 6692:1981 Cycles — Marking of cycle components▷ISO 6695:2015 Cycles — Pedal axle and crank assembly with square end fitting — Assembly dimensions▷ISO 6696:1989 Cycles — Screw threads used in bottom bracket assemblies▷ISO 6697:1994 Cycles — Hubs and freewheels — Assembly dimensions▷ISO 6698:1989 Cycles — Screw threads used to assemble freewheels on bicycle hubs▷ISO 6699:2016 Cycles — Handlebar centre and stem dimensions▷ISO 6701:1991 Cycles — External dimensions of spoke nipples▷ISO 8488:1986 Cycles — Screw threads used to assemble head fittings on bicycle forks▷ISO 8562:2022 Cycles — Stem wedge angle▷ISO 10230:1990 Cycles — Splined hub and sprocket — Mating dimensions□ ISO/TC 149 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 149/SC 1 Cycles and major sub-assemblies ; 발행된 표준 19개, 개발 중인 표준 0개
-
국표원, 김치 자원 가치 보존해 김치 종주국 위상 높인다산업통상자원부 국가기술표준원 한국인정기구(KOLAS)는 김치 자원의 가치 보존을 위해 한국식품연구원부설 세계김치연구소 김치자원은행을 공인생물자원은행으로 인정했다고 20일 밝혔다. 이에 김치 자원 보존 역량에 대한 국제공신력 제고를 통해 김치 종주국의 위상을 더욱 높일 것으로 기대된다. 한국인정기구(KOLAS)는 시험·교정 등 적합성평가 업무를 수행하는 기관의 역량을 관련 국제표준에 따라 평가하고 공인기관으로 인정해 성적서 등의 신뢰성을 보장한다. 생물자원은행은 생물자원 및 생물자원 관련 정보·데이터의 수집·수탁·준비·보존·시험·분석·보관·분양 등과 관련된 활동을 수행하는 법적 주체다. 한국인정기구(KOLAS) 공인생물자원은행 인정제도는 생물자원은행 운영에 대한 국제표준(ISO 20387)에 따라 국내 생물자원은행의 역량과 서비스 품질, 신뢰도 등을 평가해 필수 요구사항을 충족한 기관을 공인기관으로 인정하는 제도다. 백신, 신약 개발 등 바이오산업 연구 개발에 필수적인 생물 소재와 관련 정보의 품질을 제고하고 국내 생물자원은행이 국제 신뢰성을 확보할 수 있도록 지원하기 위해 지난해 도입됐다. 현재 국립보건연구원 국립중앙인체자원은행(인체유래물), 한국생명공학연구원 생물자원센터(동물, 식물, 미생물), 세계김치연구소 김치자원은행(미생물) 등 6개기관이 공인생물자원은행으로 인정된다. 세계김치연구소 김치자원은행은 저온생육능 김치유산균 균주에 대한 수집·보관·분양 등의 활동에서 인정기준에 부합한 국제 수준의 관리시스템을 보유한 것으로 평가돼 공인생물자원은행 인정을 획득했으며 앞으로도 신뢰성 있는 김치 연구자원 확보와 산업적 활용을 위해 그 종류를 늘려나갈 계획이라고 언급했다. 세계김치연구소는 김치 관련 연구개발을 종합적으로 수행하기 위해 설립된 정부출연연구기관으로 2017년 식품 및 미생물 분야에서 KOLAS 공인시험기관 인정 획득했다. 진종욱 국가기술표준원장은 “이번 김치자원은행의 공인생물자원은행 인정은 김치 자원 보존 역량에 대한 국제공신력 제고를 통해 김치 종주국의 위상을 더욱 높일 것으로 기대한다”며 “앞으로 다양한 분야의 생물자원은행 인정 확대를 통해 바이오 산업을 지원할 수 있도록 노력하겠다”고 밝혔다.
-
[특집-ISO/IEC JTC 1/SC 17 활동] ⑦ISO/TMB Communique_ Issue Nr. 75 (October 2023) 소개지난 10월3일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'ISO/TMB Communique_ Issue Nr. 75 (October 2023)' 관련 문서 v.0.1을 배포했으며 10월 16일 v.0.2를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안 장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서는 'ISO/TMB Communique_ Issue Nr. 75 (October 2023)'은 기술관리위원회(Technical Management Board, TMB)의 동향보고서 v.0.2다. TMB 동향보고서는 목차는 다음과 같이 구성됐다.ContentsTMB COMMUNIQUEHighlights from the September 2023 TMB meeting 1. New ISO/IEC JTC 1/SC 44 on Information Technology for Smart Cities 2. New TC on Data-Driven Agrifood Systems integrating the TS/P on Integrated Pest Management (IPM) for Crops 3. New PC on Sustainable raw materials & new IWA on Sustainable critical mineral supply chains 4. Re-activation of ISO/PC 302 Guidelines for Auditing Management SystemsNews 5. Improved Development Processes – Optimized Deliverables 6. TMB London Declaration Action Plan 7. L.D. Eicher Award 2023 Winner 8. ISO Open Consultation 9. Committee Strategy Management – Update 10. E-learning module available for ISO Guide 84Reminders 11. Guidance on gender responsive standards (GRS)New CommitteesTMB Resolutions
-
[특집-기술위원회] TC 130 - 그래픽 기술(Graphic technology)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 등이다.△1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111, △1964년 TC 112~TC 115, TC 117, △1965년 TC 118, △1966년 TC 119~TC 122, △1967년 TC 123, △1968년 TC 126, TC 127 등도 포함된다.ISO/TC 130 그래픽 기술(Graphic technology)과 관련된 기술위원회는 1969년 결성됐다. 사무국은 중국 국가표준화관리위원(国家标准化管理委员会, Standardization Administration of China, SAC)에서 맡고 있다.위원회는 메이팡 리(Ms Meifang Li)가 책임지고 있다. 현재 의장은 펑페이 짜오(Mr Pengfei Zhao)로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 블란딘 가르시아(Mme Blandine Garcia), ISO 편집 관리자는 마사 카산토산(Mrs Martha Casantosan) 등으로 조사됐다.범위는 인쇄 및 그래픽 기술 분야의 표준화를 다루고 있다. 이 분야는 그래픽 요소(이미지, 텍스트, 라인 아트, 패턴 등)가 생성, 조작, 조립, 전달되고 최종적으로 디지털 제품으로 전자적으로 전달되거나 잉크, 토너 및 기타를 사용해 물리적으로 기판에 전달되는 프로세스의 모든 단계를 다룬다. 마킹 또는 기능성 재료를 생산하고 최종 응용 분야의 요구에 따라 마감 처리된다.ISO/TC 130 표준에는 용어, 시각적 외관 및 제품 품질 평가, 데이터 교환, 프로세스 제어, 관리, 적합성 평가, 환경에 대한 영향 등이 포함되지만 이에 국한되지는 않는다. 뿐만 아니라 관련 재료, 장비 및 시스템에 대한 요구 사항 및 테스트도 수용한다.참고로 ISO/TC 42, TC 6, TC 256, TC 35, IEC/TC 100 및 ISO/IEC JTC 1/SC 28과 같은 다른 TC/SC와 범위가 실제 또는 잠재적으로 중복되는 경우 관련 TC와의 연락 또는 JWG를 통한 조정은 유지되거나 적극적으로 추진돼야 한다.현재 ISO/TC 130 사무국과 관련해 발행된 표준은 115개며 ISO/TC 130 사무국과 관련해 개발 중인 표준은 15개다. 참여하고 있는 회원은 21개국, 참관 회원은 22개국이다.□ ISO/TC 130 사무국 분과위원회(Subcommittee)의 책임 하에 발행된 표준 115개 중 15개 목록▷ISO 2834-1:2020 Graphic technology — Laboratory preparation of test prints — Part 1: Paste inks▷ISO 2834-2:2022 Graphic technology — Laboratory preparation of test prints — Part 2: Liquid printing inks▷ISO 2834-3:2008 Graphic technology — Laboratory preparation of test prints — Part 3: Screen printing inks▷ISO 2836:2021 Graphic technology — Prints and printing inks — Assessment of resistance of prints to various agents▷ISO 2846-1:2017 Graphic technology — Colour and transparency of printing ink sets for four-colour printing — Part 1: Sheet-fed and heat-set web offset lithographic printing▷ISO 2846-2:2007 Graphic technology — Colour and transparency of printing ink sets for four-colour printing — Part 2: Coldset offset lithographic printing▷ISO 5776:2022 Graphic technology — Symbols for text proof correction▷ISO/TS 10128:2009 Graphic technology — Methods of adjustment of the colour reproduction of a printing system to match a set of characterization data▷ISO 11084-1:1993 Graphic technology — Register systems for photographic materials, foils and paper — Part 1: Three-pin systems▷ISO 11084-2:2006 Graphic technology — Register systems for photographic materials, foils and paper — Part 2: Register pin systems for plate making▷ISO 12040:1997 Graphic technology — Prints and printing inks — Assessment of light fastness using filtered xenon arc light▷ISO 12218:1997 Graphic technology — Process control — Offset platemaking▷ISO 12632:2015 Graphic technology — Ink, paper and labels — Requirements on hot alkali penetration and resistance▷ISO 12634:2017 Graphic technology — Determination of tack of paste inks and vehicles by a rotary tackmeter▷ISO 12635:2021 Graphic technology — Plates for offset printing — Dimensions□ ISO/TC 130 사무국 분과위원회(Subcommittee)의 책임 하에 개발 중인 표준 15개 목록▷ISO/DTS 10128 Graphic technology — Methods of adjustment of the colour reproduction of a printing system to match a set of characterization data▷ISO/DIS 12641-1 Graphic technology — Prepress digital data exchange — Colour targets for input scanner calibration — Part 1: Colour targets for input scanner calibration▷ISO/FDIS 12643-1.2 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements▷ISO/FDIS 12643-2.2 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 2: Prepress and press equipment and systems▷ISO/FDIS 12643-3 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 3: Binding and finishing equipment and systems▷ISO/FDIS 12643-4 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 4: Converting equipment and systems▷ISO/FDIS 12643-5 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 5: Manually-fed stand-alone platen presses▷ISO/DIS 12647-2 Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 2: Offset lithographic processes▷ISO/AWI 15076-2 Image technology colour management — Architecture, profile format and data structure — Part 2: Based on ICC.1:2022▷ISO/DIS 15339-1 Graphic technology — Printing from digital data across multiple technologies — Part 1: Principles▷ISO/AWI TS 18621-22 Graphic technology — Image quality evaluation methods for printed matter — Part 22: Evaluation of colour graininess▷ISO/DTS 18621-31 Graphic technology — Image quality evaluation methods for printed matter — Part 31: Evaluation of the perceived resolution of printing systems with the Contrast–Resolution chart▷ISO/AWI 19307 Graphic Technology — Measurement and one-parameter representation of translucency▷ISO/CD TR 23805 Graphic technology — Dry back calculation for offset printing process▷ISO/FDIS 24487 Graphic technology — Processless lithographic plates — Evaluation methods for characteristics and performance□ ISO/TC 130 사무국의 작업그룹(Working Group, WG) 현황▷ISO/TC 130/JWG 7 Joint TC 130 - ICC WG: colour management▷ISO/TC 130/JWG 14 Joint TC 130 - TC 42 - ISO/IEC JTC 1/SC 28 WG: Print quality measurement methods▷ISO/TC 130/TF 3 Communications▷ISO/TC 130/WG 1 Terminology▷ISO/TC 130/WG 2 Prepress data exchange▷ISO/TC 130/WG 3 Process control and related metrology▷ISO/TC 130/WG 4 Media and materials▷ISO/TC 130/WG 5 Ergonomics - Safety▷ISO/TC 130/WG 10 Management of security printing processes▷ISO/TC 130/WG 11 Environmental impact of graphic technology▷ISO/TC 130/WG 12 Postpress
-
[특집-공동기술위원회] ⑥ISO/IEC JTC 1/SC 7 소프트웨어 및 시스템 엔지니어링(Software and systems engineering) 소개 - 1스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(Working Group, WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등을 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.또한 국제전기기술위원회(International Electro-technical Commission, IEC)는 전기 및 전자 제품의 고품질 인프라와 국제 무역을 뒷받침하는 글로벌 비영리 회원조직이다.기술 혁신, 저렴한 인프라 개발, 효율적이고 지속 가능한 에너지 접근, 스마트 도시화 및 교통 시스템, 기후 변화 완화를 촉진하고 사람과 환경의 안전을 향상시키는 역할을 수행하고 있다. 170개 이상의 국가를 통합하고 전 세계 2만 명의 전문가에게 글로벌하고 중립적이며 독립적인 표준화 플랫폼을 제공한다. 장치, 시스템, 설치, 서비스 및 인력이 필요에 따라 작동함을 구성원이 인증하는 4가지 적합성 평가 시스템을 관리한다.적합성 평가와 함께 정부가 국가 품질 인프라를 구축한다. 모든 규모의 기업이 전 세계 대부분의 국가에서 일관되게 안전하고 신뢰할 수 있는 제품을 사고 팔 수 있도록 하는 기술 프레임워크를 제공하는 약 1만개의 IEC 국제표준을 발행하고 있다.이러한 ISO와 IEC가 공동으로 구성한 기술위원회 ISO/IEC JTC 1 정보 기술(Information technology)에 대해 살펴볼 예정이다. JTC 1은 1987년 결성됐으며 사무국은 미국국립표준협회(American National Standards Institute, ANSI)에서 맡고 있다. 위원회는 리사 라지첼(Mrs Lisa Rajchel)가 책임지고 있다. 현재 의장은 필 웬블롬(Mr Phil Wennblom)으로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), 스티븐 더트널(Mr Stephen Dutnall), ISO 편집 관리자는 앨리슨 레이드 자몬드(Ms Alison Reid-Jamond) 등으로 조사됐다. 범위는 정보기술 분야의 표준화다.현재 ISO/IEC JTC 1의 직접적인 책임 하에 발행된 표준은 517개며 직접적인 책임 하에 개발 중인 표준은 23개다. 참여하고 있는 회원은 40개국, 참관 회원은 62개국이다.공동 기술위원회(Joint Technical Committee, JTC) 산하에서 활동하고 있는 분과위원회(Subcommittee, SC) 중 SC 1, SC 2, SC 6에 이어 SC 7에 대해 살펴보면 다음과 같다.ISO/IEC JTC 1/SC 7 소프트웨어 및 시스템 엔지니어링(Software and systems engineering)과 관련된 분과위원회는 1987년 결성됐다. 사무국은 인도 표준국(Bureau of Indian Standards, BIS)에서 맡고 있다.위원회는 레나 가르그(Ms Reena Garg)이 책임지고 있다. 현재 의장은 선딥 오베로이(Dr Sundeep Oberoi)으로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), ISO 편집 관리자는 이본느 헨(Mrs Yvonne Chen) 등으로 조사됐다.범위는 소프트웨어 제품 및 시스템 엔지니어링을 위한 프로세스, 지원 도구 및 지원 기술의 표준화다. 참고로 프로세스, 도구 및 기술은 JTC 1 참조 약관의 범위 내에 있으며 JTC 1이 다른 SC에 할당한 특정 도구 및 기술은 제외된다.현재 ISO/IEC JTC 1/SC 7 사무국의 직접적인 책임 하에 발행된 표준은 212개며 개발 중인 표준은 41개다. 참여하고 있는 회원은 37개국, 참관 회원은 24개국이다.□ ISO/IEC JTC 1/SC 7 사무국의 직접적인 책임하에 발행된 표준 및(또는) 프로젝트 212개 중 15개 목록▷ISO 5806:1984 Information processing — Specification of single-hit decision tables▷ISO 5807:1985 Information processing — Documentation symbols and conventions for data, program and system flowcharts, program network charts and system resources charts▷ISO/IEC TR 7052:2023 Software engineering — Controlling frequently occurring risks during development and maintenance of custom software▷ISO/IEC 8631:1989 Information technology — Program constructs and conventions for their representation▷ISO 8790:1987 Information processing systems — Computer system configuration diagram symbols and conventions▷ISO 8807:1989 Information processing systems — Open Systems Interconnection — LOTOS — A formal description technique based on the temporal ordering of observational behaviour▷ISO/IEC TR 10000-1:1998 Information technology — Framework and taxonomy of International Standardized Profiles — Part 1: General principles and documentation framework▷ISO/IEC 10746-1:1998 Information technology — Open Distributed Processing — Reference model: Overview — Part 1:▷ISO/IEC 10746-2:2009 Information technology — Open distributed processing — Reference model: Foundations — Part 2:▷ISO/IEC 10746-3:2009 Information technology — Open distributed processing — Reference model: Architecture — Part 3:▷ISO/IEC 10746-4:1998 Information technology — Open Distributed Processing — Reference Model: Architectural semantics — Part 4:▷ISO/IEC 10746-4:1998/Amd 1:2001 Information technology — Open Distributed Processing — Reference Model: Architectural semantics — Part 4: — Amendment 1: Computational formalization▷ISO/IEC 11411:1995 Information technology — Representation for human communication of state transition of software▷ISO/IEC TR 12182:2015 Systems and software engineering — Framework for categorization of IT systems and software, and guide for applying it▷ISO/IEC/IEEE 12207-2:2020 Systems and software engineering — Software life cycle processes — Part 2: Relation and mapping between ISO/IEC/IEEE 12207:2017 and ISO/IEC 12207:2008□ ISO/IEC JTC 1/SC 7 사무국의 직접적인 책임하에 개발중인 표준 및(또는) 프로젝트 41개 중 15개 목록▷ISO/IEC CD 9837-1 Software and systems engineering — Systems resilience — Part 1: Concepts and vocabulary▷ISO/IEC/IEEE 15026-3 Systems and software engineering — Systems and software assurance — Part 3: System integrity levels▷ISO/IEC CD 19770-5 Information technology — IT asset management — Part 5: Overview and vocabulary▷ISO/IEC PRF 19770-6 Information technology — IT asset management — Part 6: Hardware identification tag▷ISO/IEC CD TS 19770-10 Information technology — IT asset management — Part 10: Guidance for implementing ITAM▷ISO/IEC CD 20582 Software and systems engineering — Capabilities of build and deployment tools▷ISO/IEC AWI TR 24586-1 Software and systems engineering — Agile and DevOps principles and practices — Part 1: Agile principles and practices▷ISO/IEC AWI TR 24586-2 Software and systems engineering — Agile and DevOps principles and practices — Part 2: DevOps principles and practices▷ISO/IEC/IEEE FDIS 24748-1 Systems and software engineering — Life cycle management — Part 1: Guidelines for life cycle management▷ISO/IEC/IEEE FDIS 24748-2 Systems and software engineering — Life cycle management — Part 2: Guidelines for the application of ISO/IEC/IEEE 15288 (System life cycle processes)▷ISO/IEC DIS 24773-2 Software and systems engineering — Certification of software and systems engineering professionals — Part 2: Guidance regarding description of knowledge, skills, and competencies contained in schemes▷ISO/IEC DIS 25002 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Quality models overview and usage▷ISO/IEC FDIS 25010 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Product quality model▷ISO/IEC PRF 25019 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Quality-in-use model▷ISO/IEC DIS 25040 Systems and software engineering – Systems and software Quality Requirements and Evaluation (SQuaRE) – Quality evaluation framework
-
[특집] ISO/TC 85 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회는 1947년 구성된 TC1~TC67, 1948년 구성된 TC 69, 1949년에 구성된 TC 70~72, 1972년 구성된 TC68, 1950년 구성된 TC74, 1951년 구성된 TC76, 1952년 구성된 TC77, 1953년에 구성된 TC79, TC81, 1955년 구성된 TC82, TC83 등이다.ISO/TC 85 원자력, 원자력 기술 및 방사선 보호(Nuclear energy, nuclear technologies, and radiological protection)와 관련된 기술위원회는 TC84와 마찬가지로 1956년 결성됐다.사무국은 프랑스표준화협회(Association Française de Normalisation, AFNOR)에서 맡고 있다. 위원회는 나탈리 게슬린(Mme Nathalie Geslin)가 책임진다. 현재 의장은 올리비에 마르샹(M Olivier Marchand)으로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 키르시 실란더-반 후넨(Mrs Kirsi Silander-van Hunen), ISO 편집 관리자는 빈센조 바추키(M Vincenzo Bazzucchi) 등으로 조사됐다.범위는 원자력 에너지, 원자력 기술의 평화적 적용 분야 및 모든 전리 방사선원으로부터 개인과 환경을 보호하는 분야의 표준화다.현재 ISO/TC 85 사무국과 관련해 발행된 표준은 256개며 ISO/TC 85의 직접적인 책임 하에 발행된 표준은 35개다. ISO/TC 85 사무국과 관련해 개발 중인 표준은 53개며 직접적인 책임하에 개발중인 표준은 2개다. 참여하고 있는 회원은 26명, 참관 회원은 21명이다.□ ISO/TC 84 사무국의 직접 책임 하에 발행된 표준 35개 중 15개 목록▲ISO 361:1975 Basic ionizing radiation symbol▲ISO/TR 4450:2020 Quality management systems — Guidance for the application of ISO 19443:2018▲ISO 12749-1:2020 Nuclear energy — Vocabulary — Part 1: General terminology▲ISO 12749-2:2022 Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 2: Radiological protection▲ISO 12749-3:2015 Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 3: Nuclear fuel cycle▲ISO 12749-4:2015 Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 4: Dosimetry for radiation processing▲ISO 12749-5:2018 Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 5: Nuclear reactors▲ISO 12749-6:2020 Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 6: Nuclear medicine▲ISO 19443:2018 Quality management systems — Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS)▲ISO/TS 23406:2020 Nuclear sector — Requirements for bodies providing audit and certification of quality management systems for organizations supplying products and services important to nuclear safety (ITNS)▲ISO/ASTM 51026:2015 Practice for using the Fricke dosimetry system▲ISO/ASTM 51205:2017 Practice for use of a ceric-cerous sulfate dosimetry system▲ISO/ASTM 51261:2013 Practice for calibration of routine dosimetry systems for radiation processing▲ISO/ASTM 51275:2013 Practice for use of a radiochromic film dosimetry system▲ISO/ASTM 51276:2019 Practice for use of a polymethylmethacrylate dosimetry system□ ISO/TC 84 사무국의 직접 책임 하에 개발 중인 표준 2개 목록▲ISO/DIS 12749-3 Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 3: Nuclear installations, processes and technologies▲ISO/CD TS 23406 Nuclear sector — Requirements for bodies providing audit and certification of quality management systems for organizations supplying products and services important to nuclear safety (ITNS)□ ISO/TC 85 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 85/SC 2 Radiological protection ; 발행된 표준 121개, 개발 중인 표준 28개▲ISO/TC 85/SC 5 Nuclear installations, processes and technologies ; 발행된 표준 84개, 개발 중인 표준 15개▲ISO/TC 85/SC 6 Reactor technology ; 발행된 표준 18개, 개발 중인 표준 8개
-
[특집] ISO/TC 67 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 67 저탄소에너지를 포함한 석유 및 가스 산업(Oil and gas industries including lower carbon energy)와 관련된 기술위원회는 TC1, TC2, TC4~TC6, TC8, TC10~TC12, TC14, TC17~TC22, TC24~31, TC33~TC39, TC41~TC48, TC51, TC52, TC54, TC58~TC61, TC63과 동일하게 1947년 구성됐다.사무국은 네덜란드표준화기구(Royal Netherlands Standardization Institute, NEN)에서 맡고 있다. 위원회는 프랑수아즈 반 덴 브링크(Mrs Françoise van den Brink)가 책임진다. 의장은 필립 스메들리(Mr Philip Smedley)으로 임기는 2025년까지다.ISO 기술 프로그램 관리자는 키르시 실란더-반 후넨(Mrs Kirsi Silander-van Hunen), ISO 편집 관리자는 크리스틴 간손레(Ms Christelle Gansonre) 등으로 조사됐다. 범위는 석유화학 및 저탄소 에너지 활동을 포함한 석유 및 가스 산업 분야의 표준화다.□ 제외 사항▲ISO/TC 28에서 다루는 천연 또는 합성 소스의 석유 및 관련 제품, 연료 및 윤활유와 관련된 측면▲ISO/TC 193에서 다루는 천연 가스 관련 측면▲ISO/TC 197에서 다루는 수소 기술과 관련된 측면▲ISO/TC 255에서 다루는 바이오가스 관련 측면▲ISO/TC 265에서 다루는 이산화탄소 포집, 운송 및 지질학적 저장과 관련된 측면▲IMO 요구 사항(ISO/TC 8)이 적용되는 해양 구조물의 측면현재 ISO/TC 67 사무국의 직접적인 책임하에 발행된 표준은 32개며 ISO/TC 67 사무국과 관련해 발행된 표준은 231개다.ISO/TC 67 사무국의 직접적인 책임하에 개발되고 있는 표준은 4개며 ISO/TC 67 사무국과 관련해 개발되고 있는 표준은 44개다. 참여하고 있는 회원은 34명, 참관 회원은 28명이다.□ ISO/TC 67 사무국의 직접적인 책임하에 발행된 표준 32개 중 15개 목록▲ISO/TS 3250:2021 Petroleum, petrochemical and natural gas industries — Calculation and reporting production efficiency in the operating phase▲ISO/TR 12489:2013 Petroleum, petrochemical and natural gas industries — Reliability modelling and calculation of safety systems▲ISO 13085:2014 Petroleum and natural gas industries — Aluminium alloy pipe for use as tubing for wells▲ISO 13879:1999 Petroleum and natural gas industries — Content and drafting of a functional specification▲ISO 13880:1999 Petroleum and natural gas industries — Content and drafting of a technical specification▲ISO/TR 13881:2000 Petroleum and natural gas industries — Classification and conformity assessment of products, processes and services▲ISO 14224:2016 Petroleum, petrochemical and natural gas industries — Collection and exchange of reliability and maintenance data for equipment▲ISO 15156-1:2020 Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 1: General principles for selection of cracking-resistant materials▲ISO 15156-2:2020 Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons▲ISO 15156-3:2020 Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys▲ISO 15546:2011 Petroleum and natural gas industries — Aluminium alloy drill pipe▲ISO 15663:2021 Petroleum, petrochemical and natural gas industries — Life cycle costing▲ISO 16961:2015 Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks▲ISO 17348:2016 Petroleum and natural gas industries — Materials selection for high content CO2 for casing, tubing and downhole equipment▲ISO 17349:2016 Petroleum and natural gas industries — Offshore platforms handling streams with high content of CO2 at high pressures□ ISO/TC 67 사무국의 직접적인 책임하에 개발중인 표준 4개 목록▲ISO/DIS 3845 Oil and gas industries including lower carbon energy — Full ring ovalization test method for the evaluation of the cracking resistance of steel line pipe in sour service▲ISO/DIS 16961 Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks▲ISO/DIS 24201 Petroleum, petrochemical and natural gas industries — Bulk material for offshore projects — Tertiary outfitting structures▲ISO/FDIS 24202 Oil and gas industries including lower carbon energy — Bulk material for offshore projects — Monorail beam and padeye□ ISO/TC 61 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 67/SC 2 Pipeline transportation systems ; 발행된 표준 31개, 개발 중인 표준 18개▲ISO/TC 67/SC 3 Drilling and completion fluids, well cements and treatment fluids ; 발행된 표준 28개, 개발 중인 표준 0개▲ISO/TC 67/SC 4 Drilling, production and injection equipment ; 발행된 표준 55개, 개발 중인 표준 2개▲ISO/TC 67/SC 5 Casing, tubing and drill pipe ; 발행된 표준 12개, 개발 중인 표준 2개▲ISO/TC 67/SC 6 Process equipment, piping, systems, and related safety ; 발행된 표준 34개, 개발 중인 표준 5개▲ISO/TC 67/SC 7 Offshore structures ; 발행된 표준 22개, 개발 중인 표준 11개▲ISO/TC 67/SC 8 Arctic operations ; 발행된 표준 6개, 개발 중인 표준 0개▲ISO/TC 67/SC 9 Production, transport and storage facilities for cryogenic liquefied gases ; 발행된 표준 11개, 개발 중인 표준 2개
-
[특집] ISO/TC 44 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 44 용접 및 관련 공정(Welding and allied processes) 관련 기술위원회는 TC1, TC2, TC4~TC6, TC8, TC10~TC12, TC14, TC17~TC22, TC24~31, TC33~TC39, TC41~TC43과 동일하게 1947년 구성됐다.사무국은 프랑스표준화협회(Association Française de Normalisation, AFNOR)에서 맡고 있다. 위원회는 로리 자델(Mme Laurie Jardel)가 책임진다. 의장은 가이 크로머(M Guy Cromer)로 임기는 2027년까지다.ISO 기술 프로그램 관리자는 메르세 페레스 에르난데츠(Mme Mercè Ferrés Hernández), ISO 편집 관리자는 데이비드 리드(Mr David Reid) 등이다. 범위는 관련 공정뿐 아니라 모든 공정에서의 용접에 관한 표준화다.이 표준은 용어, 정의 및 도면의 용접 기효 표시, 용접 장비, 원자재(가스, 모재 및 용가재), 용접 프로세스 및 규칙, 테스트 및 제어 방법, 용접 어셈블리의 계산 및 설계, 안전 및 건강뿐 아니라 용접공의 자격 등을 포함하고 있다. 다만 IEC/TC 26의 책임이 있는 용접과 관련된 전기 안전 문제는 제외한다.현재 ISO/TC 44의 직접적인 책임하에 개발된 표준은 1개, ISO/TC 44와 관련해 발행된 ISO 표준은 321개다. ISO/TC 44의 직접적인 책임하에 개발중인 표준은 1개며 ISO/TC 44와 관련해 개발 중인 표준은 50개다. 참여하고 있는 회원은 27명, 참관 회원은 38명이다.□ ISO/TC 44 사무국의 직접적인 책임하에 발행된 표준 1개 목록▲ISO/TS 18166:2016 Numerical welding simulation — Execution and documentation□ ISO/TC 44 사무국의 직접적인 책임하에 개발중인 표준 1개 목록▲ISO/AWI TS 18166 Numerical welding simulation — Execution and documentation□ ISO/TC 44 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발중인 표준 현황▲ISO/TC 44/SC 3 Welding consumables ; 발행된 표준 36개, 개발 중인 표준 9개▲ISO/TC 44/SC 5 Testing and inspection of welds ; 발행된 표준 38개, 개발 중인 표준 1개▲ISO/TC 44/SC 6 Resistance welding and allied mechanical joining ; 발행된 표준 62개, 개발 중인 표준 5개▲ISO/TC 44/SC 7 Representation and terms ; 발행된 표준 17개, 개발 중인 표준 2개▲ISO/TC 44/SC 8 Equipment for gas welding, cutting and allied processes ; 발행된 표준 26개, 개발 중인 표준 2개▲ISO/TC 44/SC 9 Health and safety ; 발행된 표준 16개, 개발 중인 표준 3개▲ISO/TC 44/SC 10 Quality management in the field of welding ; 발행된 표준 78개, 개발 중인 표준 16개▲ISO/TC 44/SC 11 Qualification requirements for welding and allied processes personnel ; 발행된 표준 12개, 개발 중인 표준 2개▲ISO/TC 44/SC 12 Soldering materials ; 발행된 표준 19개, 개발 중인 표준 4개▲ISO/TC 44/SC 13 Brazing materials and processes ; 발행된 표준 6개, 개발 중인 표준 3개▲ISO/TC 44/SC 14 Welding and brazing in aerospace ; 발행된 표준 7개, 개발 중인 표준 1개▲ISO/TC 44/SC 15 Underwater welding ; 발행된 표준 3개, 개발 중인 표준 1개