검색결과
-
[특집-기술위원회] TC 217 - 화장품(Cosmetics)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 △1994년 TC 210, TC 211 △1996년 TC 213, TC 214 등이 있다.ISO/TC 217 화장품(Cosmetics)과 관련된 기술위원회는 TC 215, TC 216과 마찬가지로 1998년 결성됐다. 사무국은 이란 국가 표준기구(Iran National Standards Organization, INSO)에서 맡고 있다.위원회는 엘햄 가세미(Mrs Elham Ghasemi)가 책임지고 있다. 현재 의장은 울리 오스터발더(Mr Uli Osterwalder)이며 임기는 2025년 말까지다. ISO 기술 프로그램 관리자는 웬얀 리(Ms Wenyan Li), ISO 편집 관리자는 마사 카산토산(Mrs Martha Casantosan) 등이다.범위는 화장품 제품 분야의 표준화다. 현재 ISO/TC 217 사무국의 직접적인 책임 하에 발행된 표준은 49개며 ISO/TC 217 사무국의 직접적인 책임 하에 개발 중인 표준은 3개다. 참여하고 있는 회원은 43개국, 참관 회원은 30개국이다.□ ISO/TC 217 사무국의 직접적인 책임 하에 발행된 표준 49개 중 15개 목록▷ISO 4973:2023 Cosmetics — Microbiology — Quality control of culture media and diluents used in cosmetics standards▷ISO 10130:2009 Cosmetics — Analytical methods — Nitrosamines: Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC, post-column photolysis and derivatization▷ISO 11930:2019 Cosmetics — Microbiology — Evaluation of the antimicrobial protection of a cosmetic product▷ISO 11930:2019/Amd 1:2022 Cosmetics — Microbiology — Evaluation of the antimicrobial protection of a cosmetic product — Amendment 1▷ISO 12787:2011 Cosmetics — Analytical methods — Validation criteria for analytical results using chromatographic techniques▷ISO/TR 14735:2013 Cosmetics — Analytical methods — Nitrosamines: Technical guidance document for minimizing and determining N-nitrosamines in cosmetics▷ISO 15819:2014 Cosmetics — Analytical methods — Nitrosamines: Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC-MS-MS▷ISO 16128-1:2016 Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients and products — Part 1: Definitions for ingredients▷ISO 16128-2:2017 Cosmetics — Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients — Part 2: Criteria for ingredients and products▷ISO 16128-2:2017/Amd 1:2022 Cosmetics — Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients — Part 2: Criteria for ingredients and products — Amendment 1▷ISO 16212:2017 Cosmetics — Microbiology — Enumeration of yeast and mould▷ISO 16212:2017/Amd 1:2022 Cosmetics — Microbiology — Enumeration of yeast and mould — Amendment 1▷ISO 16217:2020 Cosmetics — Sun protection test methods — Water immersion procedure for determining water resistance▷ISO/TR 17276:2014 Cosmetics — Analytical approach for screening and quantification methods for heavy metals in cosmetics▷ISO 17516:2014 Cosmetics — Microbiology — Microbiological limits□ ISO/TC 217 사무국의 직접적인 책임 하에 개발 중인 표준 3개 목록▷ISO/AWI 22176 Cosmetics — Analytical methods — Development of a global approach for validation of quantitative analytical methods▷ISO/DIS 23675 Cosmetics — Sun protection test methods — In Vitro determination of Sun Protection Factor (SPF)▷ISO/DIS 23698 Cosmetics — Measurement of the sunscreen efficacy by diffuse reflectance spectroscopy
-
[특집-기술위원회] TC 219 - 바닥재(Floor coverings)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 △1994년 TC 210, TC 211 △1996년 TC 213, TC 214 △1998년 TC 215~218 등이 있다.ISO/TC 219 바닥재(Floor coverings)와 관련된 기술위원회는 1999년 결성됐다. 사무국은 벨기에 표준화기구(Bureau voor Normalisatie/Bureau de Normalisation, NBN)에서 맡고 있다.위원회는 카린 유핑거(Ms Karin Eufinger)가 책임지고 있다. 현재 의장은 제인 가드너(Ms Jane Gardner)이며 임기는 2024년 말까지다. ISO 기술 프로그램 관리자는 안나 카테리나 로시(Dr Anna Caterina Rossi), ISO 편집 관리자는 타즈나 비세빅(Ms Tajna Biscevic) 등이다.범위는 섬유, 탄력성 있는 바닥재 및 합판(라미네이트) 바닥재 분야의 표준화다. 단, 목재, 세라믹, 테라조, 콘크리트, 이중바닥재(악세스 플로어, Raised Access Floor)는 제외한다.현재 ISO/TC 219 사무국의 직접적인 책임 하에 발행된 표준은 83개며 ISO/TC 219 사무국의 직접적인 책임 하에 개발 중인 표준은 10개다. 참여하고 있는 회원은 29개국, 참관 회원은 17개국이다.□ ISO/TC 219 사무국의 직접적인 책임 하에 발행된 표준 83개 중 15개 목록▷ISO 1763:2020 Textile floor coverings — Determination of number of tufts and/or loops per unit length and per unit area▷ISO 1765:1986 Machine-made textile floor coverings — Determination of thickness▷ISO 1766:1999 Textile floor coverings — Determination of thickness of pile above the substrate▷ISO 1957:2000 Machine-made textile floor coverings — Selection and cutting of specimens for physical tests▷ISO 2094:1999 Textile floor coverings — Determination of thickness loss under dynamic loading▷ISO 2424:2007 Textile floor coverings — Vocabulary▷ISO 2549:1972 Textile floor coverings — Hand-knotted carpets — Determination of tuft leg length above the woven ground▷ISO 2549:1972/Cor 1:1990 Textile floor coverings — Hand-knotted carpets — Determination of tuft leg length above the woven ground — Technical Corrigendum 1▷ISO 2550:1972 Textile floor coverings — Hand-made carpets — Determination of types of knots▷ISO 2551:2020 Textile floor coverings and textile floor coverings in tile form — Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane▷ISO 3018:1974 Textile floor coverings — Rectangular textile floor coverings — Determination of dimensions▷ISO 3415:1986 Textile floor coverings — Determination of thickness loss after brief, moderate static loading▷ISO 3416:1986 Textile floor coverings — Determination of thickness loss after prolonged, heavy static loading▷ISO 4760:2022 Laminate flooring — Topical moisture resistance — Assembled joint▷ISO 4918:2016 Resilient, textile and laminate floor coverings — Castor chair test□ ISO/TC 219 사무국의 직접적인 책임 하에 개발 중인 표준 10개 목록▷ISO/FDIS 2424 Textile floor coverings — Vocabulary▷ISO/AWI 4918 Resilient, textile, laminate and modular mechanical locked floor coverings — Castor chair test▷ISO/CD 10833 Textile floor coverings — Determination of resistance to damage at cut edges using the modified Vettermann drum test▷ISO/CD 11378-2 Textile floor coverings — Laboratory soiling tests — Part 2: Drum test▷ISO/DIS 14486 Laminate floor coverings — Specification▷ISO/DIS 20251 Textile floor coverings — Water impermeability test▷ISO/CD 23106 Textile floor coverings — Production of changes in appearance by means of Vettermann drum tester▷ISO/CD 23122 Textile floor coverings — Production of changes in appearance by means of hexapod tumbler tester▷ISO/AWI 23999 Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat▷ISO/FDIS 24342 Resilient and textile floor-coverings — Determination of side length, edge straightness and squareness of tiles and planks
-
[특집-기술위원회] TC 214 - 승강기 작업 플랫폼(Elevating work platforms)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 △1994년 TC 210, TC 211 등이 있다.ISO/TC 214 승강기 작업 플랫폼(Elevating work platforms)과 관련된 기술위원회는 TC 213과 마찬가지로 1996년 결성됐다. 사무국은 미국 표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 샐리 사이츠(Ms Sally Seitz)가 책임지고 있다. 현재 의장은 스티븐 A. 베스트(Mr Stephen A. Best)이며 임기는 2029년 말까지다. ISO 기술 프로그램 관리자는 블란딘 가르시아(Mme Blandine Garcia), ISO 편집 관리자는 앤 기엣(Ms Anne Guiet) 등이다.범위는 용어, 등급, 일반 원칙(기술적 성능 요구 사항 및 위험 평가), 안전 요구사항, 테스트 방법, 유지관리, 승강에 사용되는 작업 플랫폼을 올리기 위한 조작 등의 표준화다. 또한 작업을 수행할 작업 위치에 직원(및 관련 작업 도구, 자재 등)을 배치에 대한 표준화도 포함된다.현재 ISO/TC 214 사무국의 직접적인 책임 하에 발행된 표준은 9개며 ISO/TC 214 사무국의 직접적인 책임 하에 개발 중인 표준은 3개다. 참여하고 있는 회원은 19개국, 참관 회원은 19개국이다.□ ISO/TC 214 사무국의 직접적인 책임 하에 발행된 표준 9개 목록▷ISO 16368:2010 Mobile elevating work platforms — Design, calculations, safety requirements and test methods▷ISO 16369:2007 Elevating work platforms — Mast-climbing work platforms▷ISO 16653-1:2008 Mobile elevating work platforms — Design, calculations, safety requirements and test methods relative to special features — Part 1: MEWPs with retractable guardrail systems▷ISO 16653-2:2021 Mobile elevating work platforms — Design, calculations, safety requirements and test methods relative to special features — Part 2: MEWPs with non-conductive (insulating) components▷ISO 16653-3:2011 Mobile elevating work platforms — Design, calculations, safety requirements and test methods relative to special features — Part 3: MEWPs for orchard operations▷ISO 18878:2013 Mobile elevating work platforms — Operator (driver) training▷ISO 18893:2014 Mobile elevating work platforms — Safety principles, inspection, maintenance and operation▷ISO 20381:2009 Mobile elevating work platforms — Symbols for operator controls and other displays▷ISO 21455:2020 Mobile elevating work platforms — Operator's controls — Actuation, displacement, location and method of operation□ ISO/TC 214 사무국의 직접적인 책임 하에 개발 중인 표준 3개 목록▷ISO/FDIS 16368 Mobile elevating work platforms — Design, calculations, safety requirements and test methods▷ISO/DIS 18878 Mobile elevating work platforms — Operator (driver) training▷ISO/DIS 18893 Mobile elevating work platforms — Safety principles, inspection, maintenance and operation
-
[인도] 마하라슈트라주 식품의약국(Maharashtra FDA), 맥도날드 상품명에 치즈를 잘못 표기해 소비자 기만 지적인도 마하라슈트라주 식품의약국(Maharashtra FDA)에 따르면 맥도날드(McDonalds)의 상품명에 치즈를 잘못 표기해 소비자를 기만했다고 지적했다.맥도날드가 판매하고 있는 버거와 너겟 제품에는 실제 치즈가 아닌 값싼 식물성 기름인 치즈 대체재를 사옹함에도 상품명에 '치즈'를 표기했기 때문이다.마하라슈트라주 식품의약국은 2023년 10월 맥도날드 측에 인도 전국 매장에서 판매 중인 관련 상품 설명에 포함된 '치즈'를 제외할 것을 요구했다.맥도날드 메뉴 중 △치즈 너겟 △맥치즈 베지버거 △맥치즈 논베지버거 △콘앤치즈 버거 △블루베리 치즈케이크 등 최소 8개 상품이 치즈 대체제를 쓴 것으로 조사됐다.한편 맥도날드는 상품명에서 치즈를 삭제했으며 디른 제품은 고품질의 치즈를 사용한다고 밝혔다. 또한 현지 치즈 공급업체인 드렉타(Dlecta Foods Pvt Ltd)는 치즈 유사제품를 공급하지 않는다고 덧붙였다.
-
[특집-기술위원회] TC 201 - 표면 화학 분석(Surface chemical analysis)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 △1988년 TC 192~TC 194 △1989년 TC 195 △1990년 TC 197, TC 198 등이 있다.ISO/TC 201 표면 화학 분석(Surface chemical analysis)과 관련된 기술위원회는 TC 199와 마찬가지로 1991년 결성됐다. 사무국은 일본 산업표준조사회(日本産業標準調査会, Japanese Industrial Standards Committee, JISC)에서 맡고 있다.위원회는 사토시 곤다(Dr Satoshi Gonda)가 책임지고 있다. 현재 의장은 히데히코 노나카(Dr Hidehiko Nonaka)이다.ISO 기술 프로그램 관리자는 주안우 주(Ms Chuanyu Zou), ISO 편집 관리자는 아룬 ABY 파라에카티(Mr Arun ABY Paraecattil) 등이다.범위는 표면 화학 분석 분야의 표준화다. 표면 화학 분석에는 전자, 이온, 중성 원자 또는 분자, 광자의 빔이 시료 재료에 입사되어 산란되거나 방출된 전자, 이온, 중성 원자 또는 분자, 광자가 감지되는 분석 기술이 포함된다.또한 표면 위로 스캔하는 조사 및 표면 관련 신호를 감지하는 기술도 포함하지만 ISO/TC 202의 범위 내에 있는 주사전자현미경은 제외한다.참고로 현재 표면 화학 분석 기술을 사용하면 분석 정보는 표면에서 가까운 영역(일반적으로 20 nm 이내)의 정보를 얻을 수 있다. 분석 정보 대비 깊이 데이터(analytical information-versus-depth data)는 더 깊은 표면 분석 기술을 사용해 얻을 수 있다.현재 ISO/TC 201 사무국과 관련해 발행된 표준은 81개며 ISO/TC 201 사무국의 직접적인 책임 하에 발행된 표준은 8개다.ISO/TC 201 사무국과 관련해 개발 중인 표준은 22개며 ISO/TC 201 사무국의 직접적인 책임 하에 개발 중인 표준은 2개다. 참여하고 있는 회원은 13개국, 참관 회원은 12개국이다.□ ISO/TC 201 사무국의 직접적인 책임 하에 발행된 표준 8개 목록▷ISO 14706:2014 Surface chemical analysis — Determination of surface elemental contamination on silicon wafers by total-reflection X-ray fluorescence (TXRF) spectroscopy▷ISO 16413:2020 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry — Instrumental requirements, alignment and positioning, data collection, data analysis and reporting▷ISO 17331:2004 Surface chemical analysis — Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy▷ISO 17331:2004/Amd 1:2010 Surface chemical analysis — Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy — Amendment 1▷ISO 18337:2015 Surface chemical analysis — Surface characterization — Measurement of the lateral resolution of a confocal fluorescence microscope▷ISO/TS 18507:2015 Surface chemical analysis — Use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis▷ISO/TR 19693:2018 Surface chemical analysis — Characterization of functional glass substrates for biosensing applications▷ISO 24465:2023 Surface chemical analysis — Determination of the minimum detectability of surface plasmon resonance device□ ISO/TC 201 사무국의 직접적인 책임 하에 개발 중인 표준 2개 목록▷ISO/AWI TR 4550 SCA –Surface chemical analysis of bacteria and biofilms▷ISO/FDIS 23124 Surface chemical analysis — Measurement of lateral and axial resolutions of a Raman microscope□ ISO/TC 201 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 201/SC 1 Terminology ; 발행된 표준 3개, 개발 중인 표준 0개▷ISO/TC 201/SC 2 General procedures ; 발행된 표준 9개, 개발 중인 표준 2개▷ISO/TC 201/SC 3 Data management and treatment ; 발행된 표준 5개, 개발 중인 표준 1개▷ISO/TC 201/SC 4 Depth profiling ; 발행된 표준 6개, 개발 중인 표준 0개▷ISO/TC 201/SC 6 Secondary ion mass spectrometry ; 발행된 표준 12개, 개발 중인 표준 2개▷ISO/TC 201/SC 7 Electron spectroscopies ; 발행된 표준 23개, 개발 중인 표준 5개 ▷ISO/TC 201/SC 8 Glow discharge spectroscopy ; 발행된 표준 6개, 개발 중인 표준 3개▷ISO/TC 201/SC 9 Scanning probe microscopy ; 발행된 표준 8개, 개발 중인 표준 4개▷ISO/TC 201/SC 10 X-ray Reflectometry (XRR) and X-ray Fluorescence (XRF) Analysis ; 발행된 표준 1개, 개발 중인 표준 3개
-
[특집-ISO/IEC JTC 1/SC 17 활동] 26. FIDO Alliance Liaison Statement to ISO/IEC JTC 1/SC 17. October 20232023년 11월30일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'FIDO Alliance Liaison Statement to ISO/IEC JTC 1/SC 17. October 2023' 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서인 'FIDO Alliance Liaison Statement to ISO/IEC JTC 1/SC 17. October 2023'는 ISO/IEC JTC 1/SC 17 워킹그룹 4와 10(WG 4 & 10)을 위한 FIDO 얼라이언스(FIDO Alliance) 연락 문서가 포함됐다.베포된 문서는 FIDO 얼라이언스의 최근 작업 항목 및 프로그램 업데이트 관련된 내용으로 구성됐다. 또한 FIDO 얼라이언스와 관련해 △기술 문서 △인증 프로그램 2024 컨퍼런스 인증 등 3가지 범주를 포함하고 있다.첫째, △클라이언트-인증자(Client to Authenticator, CTAP) 2.2 RD(2023.03. 발행) △FIDO 온보드 장치(FIDO Device Onboard, )FDO) v1.1 제안된 표준(2022.04. 발행) △FDO(FIDO Device Onboard) 어플리케이션 노트 등 기술문서에 관한 것이다.둘째, △FIDO 사용자 인증 프로그램(FIDO User Authentication Programs) △FIDO 원격 신원 확인(IDV) 프로그램(FIDO Remote Identity Verification (IDV) Programs) △FIDO 온보드 장치 인증(FIDO Device Onboard Certification) △FIDO 인증 전문가 프로그램(FIDO Certified Professional Program) 등 인증 프로그램과 관련돼 있다.셋째, FIDO 얼라이언스(FIDO Alliance)가 주최해 개최하는 'Authenticate 2024 Conference'는 FIDO 기반 sign-ins에 중점을 두고 모든 사용자 인증 측면을 다루는 업계 유일의 컨퍼런스다. 컨퍼런스 2024년 연사 모집을 시작했으며 2024년 3월4일까지 제안서를 제출하면 된다. 관련 정보는 https://authenticatecon.com/에 접속해 확인힐 수 있다. - 이하 생략 -
-
[특집-기술위원회] TC 156 - 금속 및 합금의 부식(Corrosion of metals and alloys)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.△1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 등도 포함된다.ISO/TC 156 금속 및 합금의 부식(Corrosion of metals and alloys)과 관련된 기술위원회는 1974년 결성됐다. 사무국은 중국 국가표준화관리위원회(国家标准化管理委员会, Standardization Administration of the P. R. C, SAC)에서 맡고 있다.위원회는 호우 지에(Mrs Jie Hou)이 책임지고 있다. 현재 의장은 평 챠오(Mr Chao Feng)로 임기는 2025년까지다. ISO 기술 프로그램 관리자는 추 주안우(Ms Chuanyu Zou), ISO 편집 관리자는 엔 기엣(Ms Anne Guiet) 등으로 조사됐다.범위는 부식 테스트 방법, 부식 방지 방법 및 부식 제어 엔지니어링 수명주기를 포함한 금속 및 합금 부식 분야의 표준화다. ISO 내에서 이러한 분야의 활동에 대한 일반적인 조정자 역할도 수행한다.현재 ISO/TC 156 사무국과 관련해 발행된 표준은 118개며 직접적인 책임 하에 발행된 표준은 114개다. ISO/TC 156 사무국과 관련해 개발 중인 표준은 28개며 직접적인 책임하에 개발중인 표준은 26개다. 참여하고 있는 회원은 24개국, 참관 회원은 26개국이다.□ ISO/TC 156 사무국의 직접적인 책임 하에 발행된 표준 114개 중 15개 목록▷ISO 3079:2022 Two-electrode method using acetic acid to measure pitting potential of aluminium and aluminium alloys in chloride solutions▷ISO 3651-1:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)▷ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid▷ISO 3651-3:2017 Determination of resistance to intergranular corrosion of stainless steels — Part 3: Corrosion test for low-Cr ferritic stainless steels▷ISO 4212:2023 Corrosion of metals and alloys — Method of oxalic acid etching test for intergranular corrosion of austenitic stainless steel▷ISO 4215:2022 Corrosion of metals and alloys — Test method for high-temperature corrosion testing of metallic materials by thermogravimetry under isothermal or cyclic conditions▷ISO 4631:2023 Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion potential (E-CLCP) for Ti alloys fabricated via additive manufacturing method in simulated biomedical solutions▷ISO 4680:2022 Corrosion of metals and alloys — Uniaxial constant-load test method for evaluating susceptibility of metals and alloys to stress corrosion cracking in high-purity water at high temperatures▷ISO 4905:2023 Corrosion of metals and alloys — Electrochemical test methods for high-temperature corrosion testing of metallic materials in molten salts▷ISO 5156:2022 Corrosion of metals and alloys — Corrosion test method for disinfectant — Total immersion method▷ISO 5668:2023 Corrosion of metals and alloys — Guidelines and requirements for corrosion testing in simulated environment of deep-sea water▷ISO 6509-1:2014 Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 1: Test method▷ISO 6509-2:2017 Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 2: Assessment criteria▷ISO 7384:1986 Corrosion tests in artificial atmosphere — General requirements▷ISO 7441:2015 Corrosion of metals and alloys — Determination of bimetallic corrosion in atmospheric exposure corrosion tests □ ISO/TC 156 사무국의 직접적인 책임 하에 개발 중인 표준 26개 중 15개 목록▷ISO/DIS 5929 Corrosion of Metals and Alloys — Test and evaluation method for the corrosion of steel bar embedded in concrete structure exposed to total corrosion zones in marine environments▷ISO/DIS 7054 Corrosion of metals and alloys — Wiping method for measurements of gases and particles on real structures and equipment▷ISO 7539-6:2018/DAmd 1 Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement — Amendment 1▷ISO/DIS 8044 Corrosion of metals and alloys — Vocabulary▷ISO 8407:2021/CD Amd 1 Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens — Amendment 1▷ISO/TR 8547 Corrosion of metals and alloys — Exposure test results in the Asian Monsoon region▷ISO/AWI TR 8564 Corrosion of metals and alloys — Reference data for ISO16539 Method B▷ISO 9227:2022/DAmd 1 Corrosion tests in artificial atmospheres — Salt spray tests — Amendment 1: Footnote of warning▷ISO/CD 9350 Corrosion of Metals and Alloys — Testing method for corrosion resistance for hafnium in the hightemperature and pressure▷ISO/DIS 9351 Galvanic anodes for cathodic protection in seawater and saline sediments▷ISO/DIS 9812 Corrosion of metals and alloys — Corrosion test method for disinfectant — Spray test method▷ISO 10062:2022/DAmd 1 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) — Amendment 1: Footnote of warning▷ISO/CD TR 11303 Corrosion of metals and alloys — Guidelines for selection of protection methods against atmospheric corrosion▷ISO 11782-2:1998/DAmd 1 Corrosion of metals and alloys — Corrosion fatigue testing — Part 2: Crack propagation testing using precracked specimens — Amendment 1▷ISO/AWI 16364 Guidelines for Galvanic Corrosion Control□ ISO/TC 156 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 156/SC 1 Corrosion control engineering life cycle : 발행된 표준 4개, 개발 중인 표준 2개
-
[기획-디지털 ID 표준] ⑯산업단체와 포럼 - SOG-IS(Senior Officials Group-Information Systems Security)디지털 ID(Digital Identity) 분야에서 상호운용(interoperable)이 가능하고 안전한 서비스 보장을 위한 표준에 대한 수요가 증가하고 있다. 다양한 표준 조직 및 산업 기관이 활동하는 이유다.디지털 ID 표준을 개발하는 곳은 유럽표준화기구(European Standardisation Organistions), 국제표준화기구(International Standardisation Organisations), 상업 포럼 및 컨소시엄, 국가기관 등 다양하다.산업단체와 포럼은 공식적으로 표준화 조직으로 간주되지 않지만 디지털 ID 영역을 포함한 특정 영역에서는 사실상의 표준을 제공하고 있다.몇몇의 경우 이들 단체들이 추가 비준을 위해 자신들이 생산한 사양을 ISO/IEC, ITU 통신 표준화 부문(ITU-T), ETSI 등 표준 기관에 제출할 수 있다.이러한 산업단체 및 포럼에는 △인증기관브라우저 포럼(Certification Authority Browser Forum, CA/Browser Forum) △클라우드 서명 컨소시엄(Cloud Signature Consortium, CSC) △국제자금세탁방지기구(Financial Action Task Force, FATF) △신속온라인인증(Fast Identity Online, FIDO) △국제인터넷표준화기구(Internet Engineering Task Force, IETF) △구조화 정보 표준 개발기구(오아시스)(Organization for the Advancement of Structured Information Standards, OASIS) △오픈ID(OpenID) △SOG-IS(Senior Officials Group-Information Systems Security) △W3C(World Wide Web Consortium) 등이다.SOG-IS(Senior Officials Group-Information Systems Security)는 유럽연합(EU) 또는 유럽 자유 무역 연합(European Free Trade Association, EFTA) 국가의 정부 조직 또는 정부기관간 협정으로 이사회 결정 92/242/EEC (12) 및 후속 이사회 권장 사항 95/144/EC (13)에 따라 작성됐다.SOG-IS 암호 워킹그룹(Crypto Working Group)이 발행한 'SOG-IS Crypto Evaluation Scheme Agreed Cryptographic Mechanisms' 문서는 주로 개발자와 평가자를 대상으로 작성됐다.어떤 암호화 메커니즘이 동의된 것으로 인식되는지, 즉 SOG-IS 암호화 평가 체계의 모든 SOG-IS 참가자가 수락할 순비가 됐는지 지정하는 것을 목적으로 하고 있다.'SOG-IS Crypto Evaluation Scheme Agreed Cryptographic Mechanisms' 문서의 목차를 살펴보면 다음과 같다.목차(Table of contents)1. Introduction1.1 Objective1.2 Classification of Cryptographic Mechanisms1.3 Security Level1.4 Organization of the Document1.5 Related Documents2. Symmetric Atomic Primitives2.1 Block Ciphers2.2 Stream Ciphers2.3 Hash Functions2.4 Secret Sharing3. Symmetric Constructions3.1 Confidentiality Modes of Operation: Encryption/Decryption Modes3.2 Specific Confidentiality Modes: Disk Encryption3.3 Integrity Modes: Message Authentication Codes3.4 Symmetric Entity Authentication Schemes3.5 Authenticated Encryption3.6 Key Protection3.7 Key Derivation Functions3.8 Password Protection/Password Hashing Mechanisms4. Asymmetric Atomic Primitives4.1 RSA/Integer Factorization4.2 Discrete Logarithm in Finite Fields4.3 Discrete Logarithm in Elliptic Curves4.4 Other Intractable Problems5. Asymmetric Constructions5.1 Asymmetric Encryption Scheme5.2 Digital Signature5.3 Asymmetric Entity Authentication Schemes5.4 Key Establishment6. Random Generator6.1 Random Source6.2 Deterministic Random Bit Generator6.3 Random Number Generator with Specific Distribution7. Key Management7.1 Key Generation7.2 Key Storage and Transport7.3 Key Use7.4 Key Destruction8. Person AuthenticationA Glossary
-
[기획-디지털 ID 표준] ⑫산업단체와 포럼 - 신속 온라인 인증(Fast Identity Online, FIDO)디지털 ID(Digital Identity) 분야에서 상호운용(interoperable)이 가능하고 안전한 서비스 보장을 위한 표준에 대한 수요가 증가하고 있다. 다양한 표준 조직 및 산업 기관이 활동하는 이유다.디지털 ID 표준을 개발하는 곳은 유럽표준화기구(European Standardisation Organistions), 국제표준화기구(International Standardisation Organisations), 상업 포럼 및 컨소시엄, 국가기관 등 다양하다.산업단체와 포럼은 공식적으로 표준화 조직으로 간주되지 않지만 디지털 ID 영역을 포함한 특정 영역에서는 사실상의 표준을 제공하고 있다.몇몇의 경우 이들 단체들이 추가 비준을 위해 자신들이 생산한 사양을 ISO/IEC, ITU 통신 표준화 부문(ITU-T), ETSI 등 표준 기관에 제출할 수 있다.이러한 산업단체 및 포럼에는 △인증기관브라우저 포럼(Certification Authority Browser Forum, CA/Browser Forum) △클라우드 서명 컨소시엄(Cloud Signature Consortium, CSC) △국제자금세탁방지기구(Financial Action Task Force, FATF) △신속온라인인증(Fast Identity Online, FIDO) △국제인터넷표준화기구(Internet Engineering Task Force, IETF) △구조화 정보 표준 개발기구(오아시스)(Organization for the Advancement of Structured Information Standards, OASIS) △오픈ID(OpenID) △SOG-IS(Senior Officials Group-Information Systems Security) △W3C(World Wide Web Consortium) 등이다.신속 온라인 인증(Fast Identity Online, FIDO)은 2013년 2월 출범한 개방형 산업협회다. 전 세계 비밀번호에 대한 과도한 의존을 줄이는 데 도움이 되는 인증 표준을 개발하고 홍보하는 것을 사명으로 삼고 있다.디지털 ID와 관련된 내용은 로밍 인증자와 다른 클라이언트/플랫폼 간 통신을 위한 어플리케이션 계층 프로토콜을 설명하는 클라이언트-인증자 프로토콜(Client to Authenticator Protocol, CTAP)이다.다양한 물리적 매체를 사용해 이 어플리케이션 프로토콜을 다양한 전송 프로토콜에 결합하고 있다. 클라이언트-인증자 프로토콜(Client to Authenticator Protocol, CTAP) 관련 목차를 살펴보면 다음과 같다.목차(table of contents)1. Introduction1.1 Relationship to Other Specifications2. Conformance3. Protocol Structure4. Protocol Overview5. Authenticator API5.1 authenticatorMakeCredential (0x01)5.2 authenticatorGetAssertion (0x02)5.3 authenticatorGetNextAssertion (0x08)5.3.1 Client Logic5.4 authenticatorGetInfo (0x04)5.5 authenticatorClientPIN (0x06)5.5.1 Client PIN Support Requirements5.5.2 Authenticator Configuration Operations Upon Power Up5.5.3 Getting Retries from Authenticator5.5.4 Getting sharedSecret from Authenticator5.5.5 Setting a New PIN5.5.6 Changing existing PIN5.5.7 Getting pinToken from the Authenticator5.5.8 Using pinToken5.5.8.1 Using pinToken in authenticatorMakeCredential5.5.8.2 Using pinToken in authenticatorGetAssertion5.5.8.3 Without pinToken in authenticatorGetAssertion5.6 authenticatorReset (0x07)6. Message Encoding6.1 Commands6.2 Responses6.3 Status codes7. Interoperating with CTAP1/U2F authenticators7.1 Framing of U2F commands7.1.1 U2F Request Message Framing ### (#u2f-request-message-framing)7.1.2 U2F Response Message Framing ### (#u2f-response-message-framing)7.2 Using the CTAP2 authenticatorMakeCredential Command with CTAP1/U2F authenticators7.3 Using the CTAP2 authenticatorGetAssertion Command with CTAP1/U2F authenticators8. Transport-specific Bindings8.1 USB Human Interface Device (USB HID)8.1.1 Design rationale8.1.2 Protocol structure and data framing8.1.3 Concurrency and channels8.1.4 Message and packet structure8.1.5 Arbitration8.1.5.1 Transaction atomicity, idle and busy states.8.1.5.2 Transaction timeout8.1.5.3 Transaction abort and re-synchronization8.1.5.4 Packet sequencing8.1.6 Channel locking8.1.7 Protocol version and compatibility8.1.8 HID device implementation8.1.8.1 Interface and endpoint descriptors8.1.8.2 HID report descriptor and device discovery8.1.9 CTAPHID commands8.1.9.1 Mandatory commands8.1.9.1.1 CTAPHID_MSG (0x03)8.1.9.1.2 CTAPHID_CBOR (0x10)8.1.9.1.3 CTAPHID_INIT (0x06)8.1.9.1.4 CTAPHID_PING (0x01)8.1.9.1.5 CTAPHID_CANCEL (0x11)8.1.9.1.6 CTAPHID_ERROR (0x3F)8.1.9.1.7 CTAPHID_KEEPALIVE (0x3B)8.1.9.2 Optional commands8.1.9.2.1 CTAPHID_WINK (0x08)8.1.9.2.2 CTAPHID_LOCK (0x04)8.1.9.3 Vendor specific commands8.2 ISO7816, ISO14443 and Near Field Communication (NFC)8.2.1 Conformance8.2.2 Protocol8.2.3 Applet selection8.2.4 Framing8.2.4.1 Commands8.2.4.2 Response8.2.5 Fragmentation8.2.6 Commands8.2.6.1 NFCCTAP_MSG (0x10)8.2.6.2 NFCCTAP_GETRESPONSE (0x11)8.3 Bluetooth Smart / Bluetooth Low Energy Technology8.3.1 Conformance8.3.2 Pairing8.3.3 Link Security8.3.4 Framing8.3.4.1 Request from Client to Authenticator8.3.4.2 Response from Authenticator to Client8.3.4.3 Command, Status, and Error constants8.3.5 GATT Service Description8.3.5.1 FIDO Service8.3.5.2 Device Information Service8.3.5.3 Generic Access Profile Service8.3.6 Protocol Overview8.3.7 Authenticator Advertising Format8.3.8 Requests8.3.9 Responses8.3.10 Framing fragmentation8.3.11 Notifications8.3.12 Implementation Considerations8.3.12.1 Bluetooth pairing: Client considerations8.3.12.2 Bluetooth pairing: Authenticator considerations8.3.13 Handling command completion8.3.14 Data throughput8.3.15 Advertising8.3.16 Authenticator Address Type9. Defined Extensions9.1 HMAC Secret Extension (hmac-secret)10. IANA Considerations10.1 WebAuthn Extension Identifier Registrations11S ecurity ConsiderationsIndexTerms defined by this specificationTerms defined by referenceReferencesNormative ReferencesInformative ReferencesIDL Index
-
[특집-기술위원회] TC 122 - 포장(Packaging)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 등이다.△1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111, △1964년 TC 112~TC 115, TC 117, △1965년 TC 118 등도 포함된다.ISO/TC 122 포장(Packaging)와 관련된 기술위원회는 TC 119, TC 120, TC 121과 마찬가지로 1966년에 결성됐다. 사무국은 일본산업표준조사회(日本産業標準調査会, Japanese Industrial Standards Committee, JISC)에서 맡고 있다.위원회는 아키라 시라쿠라(Mr Akira Shirakura)가 책임지고 있다. 현재 의장은 다케오 시이나(Dr Takeo Shiina)로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 모니카 이비도(Ms Monica Ibido), ISO 편집 관리자는 앤 기엣(Ms Anne Guiet) 등으로 조사됐다. 범위는 용어 및 정의, 특성, 성능 요구 사항 및 테스트와 관련된 포장 분야 및 포장 관련 기술의 활용 등에 관한 표준화다. 단, TC 6, TC 52, TC 104 등 특정 위원회 범위내에 속하는 문제들은 제외된다.현재 ISO/TC 122 사무국과 관련해 발행된 표준은 88개며 이중 직접적인 책임 하에 개발된 표준은 46개다. ISO/TC 122 사무국과 관련해 개발중인 표준은 11개며 직접적인 책임 하에 개발 중인 표준은 4개다. 참여하고 있는 회원은 31개국, 참관 회원은 48개국이다.□ ISO/TC 122 사무국의 직접적인 책임 하에 발행된 표준 46개 중 15개 목록▷ISO 780:2015 Packaging — Distribution packaging — Graphical symbols for handling and storage of packages▷ISO 3394:2012 Packaging — Complete, filled transport packages and unit loads — Dimensions of rigid rectangular packages▷ISO 3676:2012 Packaging — Complete, filled transport packages and unit loads — Unit load dimensions▷ISO 4178:1980 Complete, filled transport packages — Distribution trials — Information to be recorded▷ISO 6590-2:1986 Packaging — Sacks — Vocabulary and types — Part 2: Sacks made from thermoplastic flexible film▷ISO 6591-2:1985 Packaging — Sacks — Description and method of measurement — Part 2: Empty sacks made from thermoplastic flexible film▷ISO 7023:1983 Packaging — Sacks — Method of sampling empty sacks for testing▷ISO 7965-1:1984 Packaging — Sacks — Drop test — Part 1: Paper sacks▷ISO 7965-2:1993 Sacks — Drop test — Part 2: Sacks made from thermoplastic flexible film▷ISO 8351-2:1994 Packaging — Method of specification for sacks — Part 2: Sacks made from thermoplastic flexible film▷ISO 8367-2:1993 Packaging — Dimensional tolerances for general purpose sacks — Part 2: Sacks made from thermoplastic flexible film▷ISO 11156:2011 Packaging — Accessible design — General requirements▷ISO 11683:1997 Packaging — Tactile warnings of danger — Requirements▷ISO 11897:1999 Packaging — Sacks made from thermoplastic flexible film — Tear propagation on edge folds▷ISO 15119:2000 Packaging — Sacks — Determination of the friction of filled sacks□ ISO/TC 122 사무국의 직접적인 책임 하에 개발 중인 표준 4개 목록▷ISO/DIS 6608-1 Active and intelligent packaging — Part 1: General requirements and specifications of active packaging▷ISO/AWI TS 18617 Hand Hole Design Principles and Test Mehthods for Handheld Packages▷ISO/AWI 22742 Packaging — Linear bar code and two-dimensional symbols for product packaging▷ISO/AWI 28219 Packaging — Labelling and direct product marking with linear bar code and two-dimensional symbols□ ISO/TC 122 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 122/SC 3 Performance requirements and tests for means of packaging, packages and unit loads (as required by ISO/TC 122) ; 발행된 표준 32개, 개발 중인 표준 5개▷ISO/TC 122/SC 4 Packaging and the environment ; 발행된 표준 10개, 개발 중인 표준 2개□ ISO/TC 121 사무국 작업그룹(Working Group, WG)의 활동 현황▷ISO/TC 122/WG 5 Terminology and vocabulary▷ISO/TC 122/WG 9 Accessible design for packaging▷ISO/TC 122/WG 12 Supply chain applications of logistics technology▷ISO/TC 122/WG 16 Temperature controlled product packaging▷ISO/TC 122/WG 18 Active and intelligent packaging