검색결과
-
[특집-기술위원회] TC 216 - 신발류(Footwear)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 △1994년 TC 210, TC 211 △1996년 TC 213, TC 214 등이 있다.ISO/TC 216 신발류(Footwear)와 관련된 기술위원회는 TC 215와 마찬가지로 1998년 결성됐다. 사무국은 스페인 표준화협회(Spanish Association for Standardization, UNE)에서 맡고 있다.위원회는 헤나르 아라구조 리베라(Ms Henar Araguzo Rivera)가 책임지고 있다. 현재 의장은 카르멘 아리아스 카스텔라노(Ms Carmen ARIAS CASTELLANO)이며 임기는 2024년 말까지다. ISO 기술 프로그램 관리자는 블란딘 가르시아(Mme Blandine Garcia), ISO 편집 관리자는 발레리아 아가넨노네(Ms Valeria Agamennone) 등이다.범위는 신발 구성품에 대한 테스트 방법, 용어, 성능 요구사항의 표준화다. 또한 신발 전체에 대한 데트스 방법, 용어의 표준화도 포함된다.단, 전문가용 신발(이미 ISO/TC 94에 포함됨) 및 부츠와 신발에 대한 크기 지정 시스템 지정 및 표시(ISO/TC 137에서 다룸) 등은 제외한다.현재 ISO/TC 216 사무국의 직접적인 책임 하에 발행된 표준은 81개며 ISO/TC 216 사무국의 직접적인 책임 하에 개발 중인 표준은 15개다. 참여하고 있는 회원은 21개국, 참관 회원은 27개국이다.□ ISO/TC 216 사무국의 직접적인 책임 하에 발행된 표준 81개 중 15개 목록▷ISO 10717:2010 Footwear — Test method for slide fasteners — Burst strength▷ISO 10734:2016 Footwear — Test method for slide fasteners — Strength of slide fastener pullers▷ISO 10748:2011 Footwear — Test method for slide fasteners — Slider locking strength▷ISO 10750:2015 Footwear — Test method for slide fasteners — Attachment strength of end stops▷ISO 10751:2016 Footwear — Test methods for slide fasteners — Resistance to repeated opening and closing▷ISO 10764:2016 Footwear — Test methods for slide fasteners — Lateral strength▷ISO 10765:2010 Footwear — Test method for the characterization of elastic materials — Tensile performance▷ISO 10768:2010 Footwear — Test method for the determination of the resistance of elastic materials for footwear to repeated extension — Fatigue resistance▷ISO 16177:2012 Footwear — Resistance to crack initiation and growth — Belt flex method▷ISO/TR 16178:2021 Footwear — Critical substances potentially present in footwear and footwear components — Lists of critical chemical substances▷ISO/TS 16179:2012 Footwear — Critical substances potentially present in footwear and footwear components — Determination of organotin compounds in footwear materials▷ISO 16181-1:2021 Footwear — Critical substances potentially present in footwear and footwear components — Part 1: Determination of phthalate with solvent extraction▷ISO 16181-2:2021 Footwear — Critical substances potentially present in footwear and footwear components — Part 2: Determination of phthalate without solvent extraction▷ISO 16186:2021 Footwear — Critical substances potentially present in footwear and footwear components — Determination of dimethyl fumarate (DMFU)▷ISO 16187:2013 Footwear and footwear components — Test method to assess antibacterial activity□ ISO/TC 216 사무국의 직접적인 책임 하에 개발 중인 표준 15개 목록▷ISO/DIS 16179 Footwear — Critical substances potentially present in footwear and footwear components — Determination of organotin compounds in footwear materials▷ISO/DIS 16187 Footwear and footwear components — Test method to assess antibacterial activity▷ISO/DIS 19952 Footwear — Vocabulary▷ISO/DTS 20358 Footwear — Performance requirements for components for footwear — Accessories▷ISO/DIS 20537.2 Footwear — Identification of defects during visual inspection — Vocabulary▷ISO/CD 20681 Footwear and footwear components — Test method to assess antimicrobial activity — Agar diffusion test▷ISO/DIS 20686 Footwear — Critical substances potentially present in footwear and footwear components — Determination of certain organic solvents▷ISO/DTS 20939 Footwear — Performance requirements for components for footwear — Outsoles▷ISO/DTS 20952 Footwear — Performance requirements for components for footwear — Uppers▷ISO/DTS 20953 Footwear — Performance requirements for components for footwear — Lining and insocks▷ISO/DTS 20955 Footwear — Performance requirements for components for footwear — Insoles▷ISO/DTS 20961 Footwear — Performance requirements for components for footwear — Shanks▷ISO/DTS 20995 Footwear — Performance requirements for components for footwear — Stiffeners and toe puffs▷ISO/WD 23377 Footwear — Critical substances potentially present in footwear and footwear components — Test method to quantitatively determine certain bisphenols in footwear materials▷ISO/CD TS 23889 Footwear-Performance requirements for components for footwear-Heels and top pieces
-
[특집-기술위원회] TC 204 - 지능형 교통시스템(Intelligent transport systems)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 △1988년 TC 192~TC 194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 등이 있다.ISO/TC 204 지능형 교통시스템(Intelligent transport systems)과 관련된 기술위원회는 1992년 결성됐다. 사무국은 미국 표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 제니퍼 콜린스(Ms Jennifer Collins)가 책임지고 있다. 현재 의장은 쿠로시 올리아이(Mr Koorosh Olyai)이며 임기는 2025년말 까지다.ISO 기술 프로그램 관리자는 하킴 음킨시(Mr Hakim Mkinsi), ISO 편집 관리자는 앨리슨 레이드 자몬드(Ms Alison Reid-Jamond) 등이다.범위는 도시 및 농촌 지상 교통 분야의 정보, 통신 및 제어 시스템 표준화다. 표준화에는 인터모달 및 멀티모달 측면, 여행자 정보, 교통 관리, 대중 교통, 상업 교통, 긴급 서비스, 지능형 교통 시스템(intelligent transport systems, ITS) 분야 상업 서비스 등을 포함하고 있다. 단, 차량 내 운송 정보 및 제어 시스템(ISO/TC 22)은 제외한다.참고로 ISO/TC 204는 지능형 교통 시스템(ITS)의 전반적인 시스템 측면과 인프라 측면을 담당하고 있다. 기존 국제 표준화 기관의 작업을 고려한 표준 개발 일정을 포함해 이 분야의 전반적인 ISO 작업 프로그램을 조정하고 있다.현재 ISO/TC 204 사무국의 직접적인 책임 하에 발행된 표준은 338개며 ISO/TC 204 사무국의 직접적인 책임하에 개발 중인 표준은 67개다. 참여하고 있는 회원은 33개국, 참관 회원은 28개국이다.□ ISO/TC 204 사무국의 직접적인 책임 하에 발행된 표준 338개 중 15개 목록▷ISO 4272:2022 Intelligent transport systems — Truck platooning systems (TPS) — Functional and operational requirements▷ISO 4273:2024 Intelligent transport systems — Automated braking during low-speed manoeuvring (ABLS) — Requirements and test procedures▷ISO/TR 4286:2021 Intelligent transport systems — Use cases for sharing of probe data▷ISO/TS 4398:2022 Intelligent transport systems — Guided transportation service planning data exchange▷ISO 4426:2021 Intelligent transport systems — Lower layer protocols for usage in the European digital tachograph▷ISO/TR 4445:2021 Intelligent transport systems — Mobility integration — Role model of ITS service application in smart cities▷ISO/TR 4447:2022 Intelligent transport systems — Mobility integration — Comparison of two mainstream integrated mobility concepts▷ISO/TS 5206-1:2023 Intelligent transport systems — Parking — Part 1: Core data model▷ISO/TS 5255-1:2022 Intelligent transport systems — Low-speed automated driving system (LSADS) service — Part 1: Role and functional model▷ISO/TR 5255-2:2023 Intelligent transport systems — Low-speed automated driving system (LSADS) service — Part 2: Gap analysis▷ISO 5345:2022 Intelligent transport systems — Identifiers▷ISO/TR 6026:2022 Electronic fee collection — Pre-study on the use of vehicle licence plate information and automatic number plate recognition (ANPR) technologies▷ISO/TR 7872:2022 Intelligent transport systems — Mobility integration — Digital infrastructure service role and functional model for urban ITS service applications▷ISO/TR 7878:2023Intelligent transport systems — Mobility integration — Enterprise view▷ISO 10711:2012 Intelligent Transport Systems — Interface Protocol and Message Set Definition between Traffic Signal Controllers and Detectors□ ISO/TC 204 사무국의 직접적인 책임 하에 개발 중인 표준 67개 중 15개 목록▷ISO/CD TR 4448-1 Intelligent transport systems — Public-area Mobile Robots (PMR) — Part 1: Overview of paradigm▷ISO/AWI TS 4448-16 Intelligent transport systems — Public-area Mobile Robots (PMR) — Part 16: 16▷ISO/AWI TS 5087-3 Information technology — City data model — Part 3: Service level concepts -Transportation planning▷ISO/CD TR 6029-1.2 Intelligent transport systems — Seamless positioning for multimodal transportation in ITS stations — Part 1: General information and use case definition▷ISO/AWI 6029-2 Intelligent transport systems — Seamless positioning for multimodal transportation in ITS stations — Part 2: Nomadic and mobile device dataset for positioning data fusion▷ISO/DTS 7815-1 Intelligent transport systems — Telematics applications for regulated commercial freight vehicles (TARV) using ITS stations — Part 1: Secure vehicle interface framework and architecture▷ISO/DTS 7815-2 Intelligent transport systems — Telematics applications for regulated commercial freight vehicles (TARV) using ITS stations — Part 2: Specification of the secure vehicle interface▷ISO/CD 7856 Intelligent transport systems —Remote support for low speed automated driving systems (RS-LSADS) —Performance requirements, system requirements and performance test procedures▷ISO/AWI TR 7874-1 Intelligent transport systems — Mobility integration multimodal pricing — Part 1: Framework▷ISO/AWI 12768-1 Intelligent transport systems — Automated Valet Driving Systems (AVDS) — Part 1: Part 1: Requirements, System Framework, Communication Interfaces and Test Procedures▷ISO/AWI 12768-2 Intelligent transport systems — Automated Valet Driving Systems (AVDS) — Part 2: Part 2: System framework, security procedures and requirements▷ISO/CD TR 12786 Intelligent transport systems — Big data and artificial intelligence supporting intelligent transport systems — Use cases▷ISO 12813 Electronic fee collection — Compliance check communication for autonomous systems▷ISO/AWI 12855 Electronic fee collection — Information exchange between service provision and toll charging▷ISO/AWI 13140 Electronic fee collection -– Conformity evaluation of on-board and roadside equipment to ISO 13141
-
[특집-기술위원회] TC 185 - 과도한 압력으로부터 보호하기 위한 안전장치(Safety devices for protection against excessive pressure)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 등이 있다.ISO/TC 185 과도한 압력으로부터 보호하기 위한 안전 장치(Safety devices for protection against excessive pressure)와 관련된 기술위원회는 TC 183, TC 184와 마찬가지로 1983년 결성됐다. 사무국은 미국 표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 콜린 로드리게스(Ms Colleen Rodrigues)가 책임지고 있으며 현재 의장은 위르겐 슈미트(Mr Prof. Dr.-Ing Jürgen Schmidt)이며 임기는 2024년까지다.ISO 기술 프로그램 관리자는 샐리 스윙우드(Ms Sally Swingewood), ISO 편집 관리자는 루시 커크(Ms Lucy Kirk) 등으로 조사됐다.범위는 과도한 내부 및 외부 압력으로부터 보호하기 위한 안전 장치 분야의 표준화다. 단 ISO/TC 138의 책임 하에 있는 주로 플라스틱으로 만들어진 밸브, ISO/TC 131의 책임 하에 있는 주로 유체 동력 시스템에 사용하도록 고안된 구성 요소들은 제외한다.현재 ISO/TC 185의 직접적인 책임 하에 발행된 표준은 12개며 ISO/TC 185의 직접적인 책임 하에 개발 중인 표준은 2개다. 참여하고 있는 회원은 13개국, 참관 회원은 22개국이다.□ ISO/TC 185 사무국의 직접적인 책임 하에 발행된 표준 12개 목록▷ISO 4126-1:2013 Safety devices for protection against excessive pressure — Part 1: Safety valves▷ISO 4126-1:2013/Amd 1:2016 Safety devices for protection against excessive pressure — Part 1: Safety valves — Amendment 1▷ISO 4126-2:2018 Safety devices for protection against excessive pressure — Part 2: Bursting disc safety devices▷ISO 4126-3:2020 Safety devices for protection against excessive pressure — Part 3: Safety valves and bursting disc safety devices in combination▷ISO 4126-4:2013 Safety devices for protection against excessive pressure — Part 4: Pilot operated safety valves▷ISO 4126-5:2013 Safety devices for protection against excessive pressure — Part 5: Controlled safety pressure relief systems (CSPRS)▷ISO 4126-5:2013/Amd 1:2016 Safety devices for protection against excessive pressure — Part 5: Controlled safety pressure relief systems (CSPRS) — Amendment 1▷ISO 4126-6:2014 Safety devices for protection against excessive pressure — Part 6: Application, selection and installation of bursting disc safety devices▷ISO 4126-7:2013 Safety devices for protection against excessive pressure — Part 7: Common data▷ISO 4126-7:2013/Amd 1:2016 Safety devices for protection against excessive pressure — Part 7: Common data — Amendment 1▷ISO 4126-9:2008 Safety devices for protection against excessive pressure — Part 9: Application and installation of safety devices excluding stand-alone bursting disc safety devices▷ISO 4126-10:2010 Safety devices for protection against excessive pressure — Part 10: Sizing of safety valves for gas/liquid two-phase flow□ ISO/TC 185 사무국의 직접적인 책임 하에 개발 중인 표준 2개 목록▷ISO 4126-10 Safety devices for protection against excessive pressure — Part 10: Sizing of safety valves and bursting discs for gas/liquid two-phase flow▷ISO/AWI 4126-11 Safety devices for protection against excessive pressure — Part 11: Performance Testing
-
[특집-기술위원회] TC 174 - 보석 및 귀금속(Jewellery and precious metals)… 번호 부여 시스템, 반지 크기, 귀금속 색상 및 코팅, 다이아몬드 등 주얼리스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 등도 포함된다.ISO/TC 174 보석 및 귀금속(Jewellery and precious metals)과 관련된 기술위원회는 TC 171, TC 172, TC 173과 마찬가지로 1978년 결성됐다. 사무국은 독일 표준화기구(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다.위원회는 페트라 비쇼프((FH) Petra Bischoff)가 책임지고 있으며 현재 의장은 조나단 조드리(Mr Jonathan Jodry)이며 임기는 2024년까지다.ISO 기술 프로그램 관리자는 블란딘 가르시아(Mme Blandine Garcia), ISO 편집 관리자는 빈센조 바주치(M Vincenzo Bazzucchi) 등으로 조사됐다.범위는 번호 부여 시스템, 반지 크기, 귀금속 색상 및 코팅, 다이아몬드 등 주얼리 분야와 분석, 샘플링, 불순물 등 귀금속 분야 표준화다.현재 ISO/TC 174 사무국의 직접적인 책임 하에 발행된 표준은 21개며 ISO/TC 173 사무국의 직접적인 책임 하에 개발 중인 표준은 10개다. 참여하고 있는 회원은 19개국, 참관 회원은 25개국이다.□ ISO/TC 174 사무국의 직접적인 책임 하에 발행된 표준 21개 중 15개 목록▷ISO 5724:2023 Jewellery and precious metals — Determination of very high purity gold — Difference method using ICP-MS▷ISO 8653:2016 Jewellery — Ring-sizes — Definition, measurement and designation▷ISO 8654:2018 Jewellery — Colours of gold alloys — Definition, range of colours and designation▷ISO 8654:2018/Amd 1:2019 Jewellery — Colours of gold alloys — Definition, range of colours and designation — Amendment 1▷ISO 9202:2019 Jewellery and precious metals — Fineness of precious metal alloys▷ISO 10713:1992 Jewellery — Gold alloy coatings▷ISO 11210:2023 Jewellery and precious metals — Determination of platinum — Gravimetry using ammonium chloride▷ISO 11426:2021 Jewellery and precious metals — Determination of gold — Cupellation method (fire assay)▷ISO 11427:2014 Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using potassium bromide▷ISO 11490:2023 Jewellery and precious metals — Determination of palladium — Gravimetry using dimethylglyoxime▷ISO 11494:2019 Jewellery and precious metals — Determination of platinum in platinum alloys — ICP-OES method using an internal standard element▷ISO 11495:2019 Jewellery and precious metals — Determination of palladium in palladium alloys — ICP-OES method using an internal standard element▷ISO 11596:2021 Jewellery and precious metals — Sampling of precious metals and precious metal alloys▷ISO 13756:2015 Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using sodium chloride or potassium chloride▷ISO 15093:2020 Jewellery and precious metals — Determination of high purity gold, platinum and palladium — Difference method using ICP-OES□ ISO/TC 174 사무국의 직접적인 책임 하에 개발 중인 표준 10개 목록▷ISO/PRF 6893 Jewellery and precious metals — Inspection of batches of small diamonds — Terminology, classification and test methods▷ISO/DIS 10713 Jewellery and precious metals — Gold alloy coatings▷ISO/PRF 11427 Jewellery and precious metals — Determination of silver — Potentiometry using potassium bromide▷ISO/PRF 13756 Jewellery and precious metals — Determination of silver — Potentiometry using sodium chloride or potassium chloride▷ISO/DIS 18214 Jewellery and precious metals — Determination of high purity gold, silver, platinum and palladium — Difference method using SPARK-OES▷ISO/AWI 19376-1 Jewellery and precious metals — Vocabulary — Part 1: Precious metals and units▷ISO/CD 19919 Jewellery and precious metals — Determination of silver — ICP-OES method using an internal standard element▷ISO/AWI 21261-1 Jewellery and precious metals — Responsible precious metals — Part 1: General requirements for responsible precious metals▷ISO/AWI 21261-2 Jewellery and precious metals — Responsible precious metals — Part 2: Minimum rules and procedures for conformity assessment schemes▷ISO/AWI 21261-3 Jewellery and precious metals — Responsible precious metals — Part 3: Requirements for recycled gold
-
[특집-기술위원회] TC 157 - 비체계적 피임약 및 성병(STI) 예방 콘돔(Non-systemic contraceptives and STI barrier prophylactics)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.△1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 등도 포함된다.ISO/TC 157 비체계적 피임약 및 성병(STI) 예방 콘돔(Non-systemic contraceptives and STI barrier prophylactics)과 관련된 기술위원회는 TC 156과 마찬가지로 1974년 결성됐다. 사무국은 말레이시아 표준부(Department of Standards Malaysia, DSM)에서 맡고 있다.위원회는 페리스 프레데릭(Mr Feris Frederick)이 책임지고 있다. 현재 의장은 파리다 하님 압 하난(Dr Faridah Hanim Ab Hanan)로 임기는 2026년까지다. ISO 기술 프로그램 관리자는 페트리샤 쿡(Mme Patricia Cook), ISO 편집 관리자는 마사 카산토산(Mrs Martha Casantosan) 등으로 조사됐다.범위는 비체계적 피임약 및 성병(sexually transmitted infections, STI)을 예방하기 위한 콘돔의 표준화다.현재 ISO/TC 157 사무국의 직접적인 책임 하에 발행된 표준은 18개며 ISO/TC 15 사무국의 직접적인 책임 하에 개발중인 표준은 2개다. 참여하고 있는 회원은 24개국, 참관 회원은 28개국이다.□ ISO/TC 157 사무국의 직접적인 책임 하에 발행된 표준 18개 목록▷ISO 4074:2015 Natural rubber latex male condoms — Requirements and test methods▷ISO 7439:2023 Copper-bearing contraceptive intrauterine devices — Requirements and tests▷ISO 8009:2014 Mechanical contraceptives — Reusable natural and silicone rubber contraceptive diaphragms — Requirements and tests▷ISO 11249:2018 Copper-bearing intrauterine contraceptive devices — Guidance on the design, execution, analysis and interpretation of clinical studies▷ISO 16037:2002 Rubber condoms for clinical trials — Measurement of physical properties▷ISO 16037:2002/Amd 1:2011 Rubber condoms for clinical trials — Measurement of physical properties — Amendment 1▷ISO 16038:2017 Male condoms — Guidance on the use of ISO 4074 and ISO 23409 in the quality management of condoms▷ISO 19351:2019 Fallopian rings — Requirements and test methods▷ISO 19671:2018 Additional lubricants for male natural rubber latex condoms — Effect on condom strength▷ISO/TR 19969:2018 Guidance on sample handling for determination of bursting volume and pressure, and testing for freedom from holes for male condom▷ISO 23409:2011 Male condoms — Requirements and test methods for condoms made from synthetic materials▷ISO/TR 24484:2023 Female condoms — Use of ISO 25841 and the quality management of female condoms▷ISO 25841:2017 Female condoms — Requirements and test methods▷ISO 25841:2017/Amd 1:2020 Female condoms — Requirements and test methods — Amendment 1▷ISO 29941:2010 Condoms — Determination of nitrosamines migrating from natural rubber latex condoms □ ISO/TC 157 사무국의 직접적인 책임 하에 개발 중인 표준 2개 목록▷ISO/CD 4074 Natural rubber latex male condoms — Requirements and test methods▷ISO/TS 23148 Compatibility of lubricants with synthetic male condoms
-
[특집-기술위원회] TC 136 - 가구(Furniture)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 등이다.△1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111, △1964년 TC 112~TC 115, TC 117, △1965년 TC 118, △1966년 TC 119~TC 122, △1967년 TC 123, △1968년 TC 126, TC 127 등도 포함된다.ISO/TC 136 가구(Furniture)와 관련된 기술위원회는 TC 130, TC 131, TC 132, TC 133, TC 134, TC 135와 마찬가지로 1969년 결성됐다. 사무국은 이탈리아 표준화기구(UNI)에서 맡고 있다.위원회는 파브리치오 타카(Mr Fabrizio Tacca)가 책임지고 있다. 현재 의장은 마르코 포시(Mr Marco Fossi)으로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 블란딘 가르시아(Mme Blandine Garcia), ISO 편집 관리자는 ISO 편집팀(ISO Editing Team) 등으로 조사됐다.범위는 용어 및 정의, 성능, 안전, 치수 요구 사항, 특정 구성 요소(예: 하드우;여)에 대한 요구사항, 테스트 방법 등을 포함한 가구 분야 표준화다.가구란 보관, 눕기, 앉기, 작업 및 식사에 사용되는 독립형 또는 내장형 장치를 의미한다. 단, 다른 ISO 기술위원회에서 다루고 있는 일치하는 기능을 갖춘 단위는 제외한다.현재 ISO/TC 136 사무국의 직접적인 책임 하에 발행된 표준은 28개며 개발중인 표준은 6개다. 참여하고 있는 회원은 23개국, 참관 회원은 40개국이다.□ ISO/TC 136 사무국 분과위원회(Subcommittee)의 책임 하에 발행된 표준 28개 중 15개 목록▷ISO 3055:2021 Kitchen equipment — Coordinating sizes▷ISO 4211-2:2013 Furniture — Tests for surface finishes — Part 2: Assessment of resistance to wet heat▷ISO 4211-3:2013 Furniture — Tests for surface finishes — Part 3: Assessment of resistance to dry heat▷ISO 4211-4:1988 Furniture — Tests for surfaces — Part 4: Assessment of resistance to impact▷ISO 4211-5:2021 Furniture — Tests for surface finishes — Part 5: Assessment of resistance to abrasion▷ISO 4211:1979 Furniture — Assessment of surface resistance to cold liquids▷ISO 4769:2022 Hardware for furniture — Strength and durability of hinges and their components — Hinges pivoting on a vertical axis▷ISO 7170:2021 Furniture — Storage units — Test methods for the determination of strength, durability and stability▷ISO 7172:1988 Furniture — Tables — Determination of stability▷ISO 7173:2023 Furniture — Chairs and stools — Determination of strength and durability▷ISO 7174-1:1988 Furniture — Chairs — Determination of stability — Part 1: Upright chairs and stools▷ISO 7174-2:1992 Furniture — Chairs — Determination of stability — Part 2: Chairs with tilting or reclining mechanisms when fully reclined, and rocking chairs▷ISO 7175-1:2019 Furniture — Children's cots and folding cots for domestic use — Part 1: Safety requirements▷ISO 7175-2:2019 Furniture — Children's cots and folding cots for domestic use — Part 2: Test methods▷ISO 8191-1:1987 Furniture — Assessment of the ignitability of upholstered furniture — Part 1: Ignition source: smouldering cigarette□ ISO/TC 136 사무국 분과위원회(Subcommittee)의 책임 하에 개발 중인 표준 6개 목록▷ISO/CD 4211-1 Furniture — Tests for surface finishes — Part 1: Assessment of resistance to cold liquids▷ISO/AWI 4211-6 Furniture — Tests for surface finishes — Part 6: Assessment of resistance to scratching▷ISO/DIS 9221 Furniture — Children's high chairs — Safety requirements and test methods▷ISO/DIS 12808 Hardware for furniture — Strength and durability of extension elements and their components▷ISO/DIS 16502-1 Furniture — Assessment of the ignitability of mattresses and upholstered bed bases — Part 1: Ignition source: smouldering cigarette▷ISO/DIS 16502-2 Furniture — Assessment of the ignitability of mattresses and upholstered bed bases — Part 2: Ignition source: match flame equivalent□ ISO/TC 136 사무국산하 표준을 개발하고 있는 워킹그룹 현황▷ISO/TC 136/AG 1 Advisory Group on Cooperation with IEC/TC 61▷ISO/TC 136/WG 1 Chairs - Methods of test▷ISO/TC 136/WG 2 Tables - Methods of test▷ISO/TC 136/WG 3 Storage units - Test methods for determination of strength and durability▷ISO/TC 136/WG 4 Beds - Methods of test▷ISO/TC 136/WG 6 Children's and nursery furniture▷ISO/TC 136/WG 7 Mattresses – Methods of test▷ISO/TC 136/WG 8 Furniture surfaces - Methods of test▷ISO/TC 136/WG 9 Hardware for furniture – Methods of test
-
[미국] 특허법 284조, 특허 침해시에 평결되거나 산정된 손해배상액의 3배까지 부과미국 특허법 284조에는 특허 소송에 대한 손해배상을 명시하고 있어 무리한 특허 침해에 경종을 울리고 있다. 특허 침해로 인한 손해배상의 산정에 대해 알아보자.특허 침해의 경우 법원이 “손해배상액은 해당 발명의 사용에 대한 합당한 사용료에 법원이 정한 이자 및 비용을 합산한 것보다 적어서는 안되며, 번원은 증거우위의 법칙에 근거해 침해가 고의적이거나 악의적이었다고 판단되는 경우에는, 평결되었거나 산정된 손해배상액의 3배까지 부과할 수 있다"라고 규정돼 있다.구체적으로는 2007년 Seagate사건에서 연방항소순회법원의 판결에 따라 징벌적 손해배상의 기준이 정립됐다. 특히 연방항소 순회법원(Federal Circuit)의 two-part Seagate 테스트에서 특허 소유자가 명확하고 설득력 있는 증거를 보여줌으로써 284조에 따라 손해액이 증가될 수 있다는 사례로 기록됐다.그러나 이 판결은 특허권자에게 과다하게 높은 입증 의무를 부여한다는 비판을 받았다. 이에 따라 미국 대법원은 2016년 6월 13일 Halo Electronics사와 Pulse electronics사간의 판결에서 고의적인 침해를 발견하기 위한 표준을 완화했다. 즉 특허 소유자는 이전보다 고의적인 침해를 주장하고 손해배상을 청구하기 쉬워졌다.요약: 본 건은 2016년 대법원 판결에 따라 지방법원에서 Stryker와 Zimmer간의 손해배상 소송에서 Zimmer에게 3배의 손해배상을 명령했다. 연방항소순회법원에서 이를 지지한 판결이리라고 평가할 수 있다.영문요약: Enhanced Damage Against the InfringerStryker Corp. v. Zimmer, Inc. (Fed. Cir. 2018):History•This case is coming from the Supreme Court case in 2016.•At that time, the Supreme Court changed the standard for enhanced damages and remanded the case back to the district court.•When the case was remanded back to the district court, the jury found that Zimmer infringed the patent and awarded over $70 million in compensatory damages.•Jury also found that the infringement was willful.•At district court, the judge awarded the treble (3X) damages.•Zimmer appealed to FC and argued that 3X damage is unfair.•Federal Circuit affirmed the district court ruling without offering any reasoning behind its decision.•Key Point: willful infringement could be very significant and detrimental to the infringer.•Supreme Court relaxed the standard for finding willful infringement in 2016.•In 2014, FC held for Zimmer. BUT, with the new standard held by the Supreme Court, Stryker’s award has now been affirmed.•Patent owners will be more likely than before to pursue a willful infringement claim and enhanced damages.
-
[미국] 연방대법원, 'KSR'판결에서 특허의 '자명성' 판단 기준인 TSM기법의 유연한 적용2007년 4월 내려진 미국연방대법원의 KSR v. Teleflex 판결)(이하 ‘KSR' 판결’)은 TSM(Teaching, Suggestion and Motivation) 테스트 기법의 엄격한 적용에 대해 비판하면서 융통성 있는 적용이 핵심이다.해당 판결에서 연방대법원은 TSM 기법의 엄격하게 적용하는 대신에 보다 유연한 적용을 해야 하는 이유를 설명하였다.특히 이미 선행기술에 알려진 요소들을 결합할만한 명백한 이유가 있는지를 결정하기 위해서는 다음 사항을 검토해 심리해야 한다고 주장했다.첫째, 복수의 특허들에 제시된 상호관계가 있는 가르침들(interrelated teachings of multiple patents)둘째, 설계커뮤니티에 알려져 있거나 시장에 존재하는 요구의 영향(effects of demands known to design community or present in the market place)셋째, 관련 분야에서 통상의 지식을 가진 자들의 배경(background knowledge possessed by a person having ordinary skill in the art) 등이다.또한 연방대법원은 자명성에 의해 특허를 거절하는 것은 단순히 결론을 언급하는 것만으로는 안되고 대신에 자명성에 대한 법적인 결론을 지지할 수 있는 논리정연한 이유(some articulated reasoning with some rational underpinning to support the legal conclusion of obviousness)가 반드시 따라야 한다는 점을 강조했다.한편, 하기 판례는 상기에 언급된 자명성과 관련된 내용 중 바이오기업이나 화학기업의 특허에서 주로 청구되는 수치범위(range)와 관련된 내용이다. 교훈을 정리하면 다음과 같다.1. 본 판례는 미국특허(US8,865,921)과 관련된 듀폰과 신비나간(E. I. du Pont de Nemours & Co. v. Synvina C.V.)의 특허소송결과이다. 2. 연방순회항소법원에서는 "발명의 명세서를 작성할 때 종래기술에 언급된 범위와 본 발명의 범위가 겹치지 않도록 작성되거나, 예상치 못한 결과 또는 개선이 있다는 점을 주장할 수 있도록 조심스럽게 작성돼야 한다"고 밝혔다.3. 영문 요약•In IPR, PTAB held that the Synvina’s challenged chem-prep patent obvious.•DuPont appealed to FC.•Claim 1 is directed to method of preparing FDCA, which can be made from plant-sugars and then used to make plastic/polymers.•Disclosed different temperature, pressures, solvents, and catalysts from prior art.A prima facie case of obviousness typically exists when the claimed ranges overlap the ranges disclosed in the prior art.•Here, FC believed that the prior art references provided the support for a prima facie case of obviousness, and the patentee was not able to provide the evidence against the obviousness (i.e. unexpected results).•The court pieced together the cited references above to show overlap.
-
[기획-디지털 ID 기술] ㊶ 존슨컨트롤티코아이피홀딩스, '액세스 컨트롤을 위한 디지털 아이디 프로필의 자동 생성 및 관리' 명칭의 미국 특허 등록 (US 11763613)미국 지적재산권 관리 기업 존슨컨트롤티코아이피홀딩스(Johnson Controls Tyco IP Holdings)에 따르면 2023년 9월19일 '액세스 컨트롤을 위한 디지털 아이디 프로필의 자동 생성 및 관리(Automatic creation and management of digital identity profiles for access control)' 명칭의 미국 특허 (US 11763613)가 등록됐다.본 등록 특허는 2021년 3월 8일에 출원(US 17/195219)된 후 미국 특허청에 의해 심사를 받았다. 패밀리 특허로 PCT 국제 출원(PCT-US2022-070973)이 2022년 3월4일 출원됐다.본 등록 특허는 액세스 제어 시스템을 통해 개인과 관련된 접근 시도를 식별하는 방법에 관한 특허다. 본 등록 특허의 일 실시예에 따르면 억세스 제어 시스템을 통해 개인의 아이디를 확인한다. 개인의 아이디를 확인하는 것에 응답하여 액세스 제어 시스템에 의해 개인에 대한 액세스를 허가한다. 액세스 시도와 동시에 캡처된 개인의 시각 데이터에 기초해 개인의 디지털 아이디 프로파일을 액세스 제어 시스템에 의해 구축한다.
-
[특집-공동기술위원회] ⑤JTC 1/SC 6 시스템 간 통신 및 정보 교환(Telecommunications and information exchange between systems)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(Working Group, WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등을 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.또한 국제전기기술위원회(International Electro-technical Commission, IEC)는 전기 및 전자 제품의 고품질 인프라와 국제 무역을 뒷받침하는 글로벌 비영리 회원 조직이다.기술 혁신, 저렴한 인프라 개발, 효율적이고 지속 가능한 에너지 접근, 스마트 도시화 및 교통 시스템, 기후 변화 완화를 촉진하고 사람과 환경의 안전을 향상시키는 역할을 수행하고 있다. 170개 이상의 국가를 통합하고 전 세계 2만명의 전문가에게 글로벌하고 중립적이며 독립적인 표준화 플랫폼을 제공하고 있다. 장치, 시스템, 설치, 서비스 및 인력이 필요에 따라 작동함을 구성원이 인증하는 4가지 적합성 평가 시스템을 관리한다.적합성 평가와 함께 정부가 국가 품질 인프라를 구축하고 모든 규모의 기업이 전 세계 대부분의 국가에서 일관되게 안전하고 신뢰할 수 있는 제품을 사고 팔 수 있도록 하는 기술 프레임워크를 제공하는 약 1만개의 IEC 국제표준을 발행하고 있다.이러한 ISO와 IEC가 공동으로 구성한 기술위원회 ISO/IEC JTC 1 정보 기술(Information technology)에 대해 살펴볼 예정이다. JTC 1은 1987년에 결성됐으며 사무국은 미국국립표준협회(American National Standards Institute, ANSI)에서 맡고 있다. 위원회는 리사 라지첼(Mrs Lisa Rajchel)가 책임지고 있다. 현재 의장은 필 웬블롬(Mr Phil Wennblom)으로 임기는 202년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), 스티븐 더트널(Mr Stephen Dutnall), ISO 편집 관리자는 앨리슨 레이드 자몬드(Ms Alison Reid-Jamond) 등으로 조사됐다. 범위는 정보기술 분야의 표준화다.현재 ISO/IEC JTC 1의 직접적인 책임 하에 발행된 표준은 517개며 직접적인 책임 하에 개발중인 표준은 23개다. 참여하고 있는 회원은 40개국, 참관 회원은 62개국이다.공동 기술위원회(Joint Technical Committee, JTC) 산하에서 활동하고 있는 분과위원회(Subcommittee, SC) 중 SC 1, SC 2에 이어 SC 6에 대해 살펴보면 다음과 같다.ISO/IEC JTC 1/SC 6 시스템간 통신 및 정보 교환(Telecommunications and information exchange between systems)과 관련된 분과위원회는 1988년 결성됐다. 사무국은 한국 국가기술표준원(Korean Agency for Technology and Standards, KATS)에서 맡고 있다.위원회는 오정엽(Mr Jungyup OH)이 책임지고 있다. 현재 의장은 강현국(Dr Hyun Kook Kahng)으로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), ISO 편집 관리자는 클라우디아 루에제(Ms Claudia Lueje) 등으로 조사됐다.범위는 사용 조건 뿐 아니라 시스템 기능, 절차, 매개변수를 포함해 개방형 시스템 간의 정보 교환을 다루는 통신 분야 표준화 작업을 진행해 왔다.이 표준화는 물리적, 데이터 링크, 네트워크 및 전송을 포함한 하위 계층의 프로토콜과 서비스뿐만 아니라 디렉토리 및 ASN.1(MFAN, NFC, PLC, 미래 네트워크 및 OID)을 포함하되 이에 국한되지 않는 상위 계층의 프로토콜 및 서비스를 포함하고 있다.현재 ISO/IEC JTC 1/SC 6 사무국의 직접적인 책임 하에 발행된 표준은 397개며 개발 중인 표준은 18개다. 참여하고 있는 회원은 19명, 참관 회원은 36명이다.□ ISO/IEC JTC 1/SC 6 사무국의 직접적인 책임하에 발행된 표준 및(또는) 프로젝트 397개 중 15개 목록▷ISO 1155:1978 Information processing — Use of longitudinal parity to detect errors in information messages▷ISO 1177:1985 Information processing — Character structure for start/stop and synchronous character oriented transmission▷ISO 1745:1975 Information processing — Basic mode control procedures for data communication systems▷ISO 2110:1989 Information technology — Data communication — 25-pole DTE/DCE interface connector and contact number assignments▷ISO 2110:1989/Amd 1:1991 Information technology — Data communication — 25-pole DTE/DCE interface connector and contact number assignments — Amendment 1: Interface connector and contact number assignments for a DTE/DCE interface for data signalling rates above 20 000 bit/s per second▷ISO/IEC 2593:2000 Information technology — Telecommunications and information exchange between systems — 34-pole DTE/DCE interface connector mateability dimensions and contact number assignments▷ISO 2628:1973 Basic mode control procedures — Complements▷ISO 2629:1973 Basic mode control procedures — Conversational information message transfer▷ISO/IEC 4005-1:2023 Telecommunications and information exchange between systems — Unmanned aircraft area network (UAAN) — Part 1: Communication model and requirements▷ISO/IEC 4005-2:2023 Telecommunications and information exchange between systems — Unmanned aircraft area network (UAAN) — Part 2: Physical and data link protocols for shared communication▷ISO/IEC 4005-3:2023 Telecommunications and information exchange between systems — Unmanned aircraft area network (UAAN) — Part 3: Physical and data link protocols for control communication▷ISO/IEC 4005-4:2023 Telecommunications and information exchange between systems — Unmanned aircraft area network (UAAN) — Part 4: Physical and data link protocols for video communication▷ISO 4902:1989 Information technology — Data communication — 37-pole DTE/DCE interface connector and contact number assignments▷ISO 4903:1989 Information technology — Data communication — 15-pole DTE/DCE interface connector and contact number assignments▷ISO/IEC 5021-1:2023 Telecommunications and information exchange between systems — Wireless LAN access control — Part 1: Networking architecture▷ISO/IEC 5021-2:2023 Telecommunications and information exchange between systems — Wireless LAN access control — Part 2: Dispatching platform□ ISO/IEC JTC 1/SC 6 사무국의 직접적인 책임하에 개발중인 표준 및(또는) 프로젝트 18개 중 15개 목록▷ISO/IEC PRF 4396-1 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 1: Reference model▷ISO/IEC PRF 4396-2 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 2: Common application connection establishment protocol▷ISO/IEC PRF 4396-3 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 3: Common distributed application protocol▷ISO/IEC PRF 4396-4 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 4: Complete enrolment procedures▷ISO/IEC PRF 4396-5 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 5: Incremental enrolment procedures▷ISO/IEC PRF 4396-6 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 6: RINA data transfer service▷ISO/IEC PRF 4396-7 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 7: Flow allocator▷ISO/IEC PRF 4396-8 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 8: RINA general delimiting procedures▷ISO/IEC PRF 4396-9 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 9: Error and flow control protocol▷ISO/IEC/IEEE DIS 8802-1Q Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 1Q: Bridges and bridged networks▷ISO/IEC 9594-8:2020/CD Cor 2 Information technology — Open systems interconnection — Part 8: The Directory: Public-key and attribute certificate frameworks — Technical Corrigendum 2▷ISO/IEC 9594-11:2020/CD Cor 1 Information technology — Open systems interconnection directory — Part 11: Protocol specifications for secure operations — Technical Corrigendum 1▷ISO/IEC 9594-11:2020/DAmd 1 Information technology — Open systems interconnection directory — Part 11: Protocol specifications for secure operations — Amendment 1▷ISO/IEC DIS 9594-12 Information technology — Open systems interconnection — Part 12: The Directory: Key management and public-key infrastructure establishment and maintenance▷ISO/IEC FDIS 18092 Telecommunications and information exchange between systems — Near Field Communication Interface and Protocol 1 (NFCIP-1)