검색결과
-
[특집-기술위원회] TC 206 - 파인 세라믹(Fine ceramics)… 모든 형태의 파인 세라믹 재료 및 제품 분야 표준화스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 △1988년 TC 192~TC 194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 등이 있다.ISO/TC 206 파인 세라믹(Fine ceramics)과 관련된 기술위원회는 TC 204, TC 205와 마찬가지로 1992년 결성됐다. 사무국은 일본 산업표준조사회(日本産業標準調査会, Japanese Industrial Standards Committee, JISC)에서 맡고 있다.위원회는 히로유키 미야자키(Dr Hiroyuki Miyazaki)가 책임지고 있다. 현재 의장은 이희수 교수(Prof Heesoo Lee)가 맡고 있다.ISO 기술 프로그램 관리자는 츄안유 추(Ms Chuanyu Zou), ISO 편집 관리자는 아룬 ABY 파라에카틸(Mr Arun ABY Paraecattil) 등이다.범위는 모든 형태의 파인 세라믹 재료 및 제품 분야 표준화다. 기계, 열, 화학, 전기, 자기, 광학 및 이들의 조합을 포함한 특정 기능 응용 분야를 위한 분말, 단일체, 코팅 및 복합재 등 모든 형태를 포함하고 있다. 파인 세라믹이라는 용어는 특정 기능적 특성을 지닌 고도로 가공된 고성능, 주로 비금속 무기 재료로 정의된다.참고로 파인 세라믹의 대체 용어는 고급 세라믹, 엔지니어링 세라믹, 테크니컬 세라믹 또는 고성능 세라믹이다. 파인 세라믹(Fine ceramics)은 절연체·내열재·구조재로 쓸수 있도록 고도기술로 개발된 새로운 세라믹을 말한다.현재 ISO/TC 206 사무국의 직접적인 책임 하에 발행된 표준은 156개며 ISO/TC 206 사무국의 직접적인 책임하에 개발 중인 표준은 32개다. 참여하고 있는 회원은 13개국, 참관 회원은 22개국이다.□ ISO/TC 206 사무국의 직접적인 책임 하에 발행된 표준 156개 중 15개 목록▷ISO 3169:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of impurities in aluminium oxide powders using inductively coupled plasma-optical emission spectrometry▷ISO 3180:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of calcium-phosphate-based powders for non-biomedical applications▷ISO 4825-1:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) --Test method for thermal property measurements of metalized ceramic substrates — Part 1: Evaluation of thermal resistance for use in power modules▷ISO 5189:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of metal impurities in silicon dioxide powders using inductively coupled plasma-optical emission spectrometry▷ISO 5618-1:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for GaN crystal surface defects — Part 1: Classification of defects▷ISO 5712:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) — Method for measuring the power generation characteristics of piezoelectric resonant devices for stand-alone power sources▷ISO 5722:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining tensile and shear creep of ceramic adhesive▷ISO 5803:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determination of monoclinic phase in zirconia▷ISO/TS 6857:2024 Fine ceramics (advanced ceramics, advanced technical ceramics) — Physical properties of ceramic composites — Guidelines for determination of void and fibre contents in polished cross section by image analysis▷ISO 10676:2010 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for water purification performance of semiconducting photocatalytic materials by measurement of forming ability of active oxygen▷ISO 10677:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) — Ultraviolet light source for testing semiconducting photocatalytic materials▷ISO 10678:2010 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue▷ISO 11894-1:2013 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for conductivity measurement of ion-conductive fine ceramics — Part 1: Oxide-ion-conducting solid electrolytes▷ISO 13124:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for interfacial bond strength of ceramic materials▷ISO 13125:2013 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for antifungal activity of semiconducting photocatalytic materials□ ISO/TC 206 사무국의 직접적인 책임 하에 개발 중인 표준 32개 중 15개 목록▷ISO/CD 4255 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic matrix composites at high temperature — Determination of axial tensile properties of tubes▷ISO/AWI 4825-2 Fine ceramics (advanced ceramics, advanced technical ceramics) --Test method for thermal property measurements of metalized ceramic substrates — Part 2: Evaluation of heat transfer characteristics for metalized ceramics substrate for power modules▷ISO/PRF 5618-2 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for GaN crystal surface defects — Part 2: Method for determining etch pit density▷ISO/CD 5770 Fine ceramics (advanced ceramics, advanced technical ceramics) — Relative method for determining thermal conductivity of ceramic coatings▷ISO/DIS 10678 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue▷ISO/AWI 10820 Fine ceramics (advanced ceramics, advanced technical ceramics) — Ultraviolet irradiation equipment using UV-A LEDs and optical radiometry for performance test of semiconducting photocatalytic materials▷ISO/DIS 14544 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at high temperature — Determination of compressive properties▷ISO/DIS 14574 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at high temperature — Determination of tensile properties▷ISO/CD 14705 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature▷ISO/WD 15733 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure — Determination of tensile properties▷ISO/AWI 17138 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at room temperature — Determination of flexural strength▷ISO/AWI 17561 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test methods for dynamic elastic moduli of monolithic ceramics at room temperature by sonic resonance and Impulse Excitation Technique (IET)▷ISO/CD 17590 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of tests for reinforcements — Determination of the tensile properties of ceramic filaments at elevated temperature in air using the hot grip technique▷ISO/AWI 17947-1 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of fine silicon nitride powders — Part 1: Wet chemical methods, X-ray fluorescence (XRF) using the fused cast-bead method, carrier-gas hot extraction (CGHE) and combustion methods▷ISO/AWI 18719 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of impurities in yttrium oxide powders using inductively coupled plasma-optical emission spectrometry
-
[특집-기술위원회] TC 192 - 가스 터빈(Gas turbines)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 등이 있다.ISO/TC 192 가스 터빈(Gas turbines)과 관련된 기술위원회는1988년 결성됐다. 사무국은 미국 표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 크리스토퍼 다빌라-아폰테(Mr Christopher Davila-Aponte)이 책임지고 있다. 현재 의장은 조지 랭튼(Mr George Langton)이며 임기는 2024년 말까지다. ISO 기술 프로그램 관리자는 모니카 이비도(Ms Monica Ibido), ISO 편집 관리자는 루시 커크(Ms Lucy Kirk)등으로 조사됐다.범위는 단순 터빈 사이클, 복합 사이클 시스템, 정의, 조달, 수용, 성능, 환경(가스터빈 자체 및 외부 환경에 대한) 및 테스트 방법 등을 포함해 가스 터빈 설계, 적용, 안전, 설치, 운영 및 유지보수의 모든 분야의 표준화다. 표준화에서는 재생 에너지 생산의 변동을 보상하기 위해 재생 가능한 영역 지원하기 위해 가스 터빈이 구현되는 것을 고려한다. 표준화는 가스 터빈 기술이 광범위한 기체 및 액체 연료를 사용해 작동한다는 점을 고려한다.ISO/TC 192는 모든 유형의 가스 터빈에 대한 수평적 표준을 준비하는 일을 담당한다. 항공가스터빈 엔진에 대한 작업은 주요 책임을 맡은 기술위원회와 협력해 수행돼야 한다. 참고로 ISO/TC 20은 항공우주을 위한 가스 터빈의 특정 응용과 관련한 표준을 준비하는 1차적인 책임을 진다.현재 ISO/TC 192 사무국의 직접적인 책임하에 발행된 표준은 18개며 ISO/TC 192 사무국의 직접적인 책임 하에 개발 중인 표준은 3개다. 참여하고 있는 회원은 15개국, 참관 회원은 12개국이다.□ ISO/TC 192 사무국의 직접적인 책임 하에 발행된 표준 15개 목록▷ISO 2314:2009 Gas turbines — Acceptance tests▷ISO 3977-1:1997 Gas turbines — Procurement — Part 1: General introduction and definitions▷ISO 3977-2:2023 Gas turbines — Procurement — Part 2: Standard reference conditions and ratings▷ISO 3977-3:2004 Gas turbines — Procurement — Part 3: Design requirements▷ISO 3977-4:2002 Gas turbines — Procurement — Part 4: Fuels and environment▷ISO 3977-8:2002 Gas turbines — Procurement — Part 8: Inspection, testing, installation and commissioning▷ISO 3977-9:1999 Gas turbines — Procurement — Part 9: Reliability, availability, maintainability and safety▷ISO 10494:2018 Turbines and turbine sets — Measurement of emitted airborne noise — Engineering/survey method▷ISO 11042-1:1996 Gas turbines — Exhaust gas emission — Part 1: Measurement and evaluation▷ISO 11042-2:1996 Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring▷ISO 11086:1996 Gas turbines — Vocabulary▷ISO 18888:2017 Gas turbine combined cycle power plants — Thermal performance tests▷ISO 19372:2015 Microturbines applications — Safety▷ISO 19859:2016 Gas turbine applications — Requirements for power generation▷ISO 19860:2005 Gas turbines — Data acquisition and trend monitoring system requirements for gas turbine installations□ ISO/TC 192 사무국의 직접적인 책임 하에 개발 중인 표준 3개 목록▷ISO/AWI 2314 Gas turbines — Acceptance tests▷ISO/FDIS 3977-9 Gas turbines — Procurement — Part 9: Reliability, availability and maintainability▷ISO/WD 19372 Microturbines applications — Safety
-
[특집-기술위원회] TC 188 - 소형선박(Small craft)… 선체 길이가 최대 24미터인 레저 선박 및 유사한 장비를 사용하는 기타 소형 선박스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186등이 있다.ISO/TC 188 소형선박(Small craft)과 관련된 기술위원회는 1984년 결성됐다. 사무국은 스웨덴 국립표준청(Svenska institutet för standarder, SIS)에서 맡고 있다.위원회는 아네트 에릭슨(Ms Anette Eriksson)이 책임지고 있다. 현재 의장은 크레이그 숄튼(Mr Craig Scholten)이며 임기는 2026년까지다.ISO 기술 프로그램 관리자는 메르세 페레 에르난데스(Mme Mercè Ferrés Hernández) ISO 편집 관리자는 니콜라 페루(Ms Nicola Perou) 등으로 조사됐다.범위는 선체 길이가 최대 24미터인 레저 선박 및 유사한 장비를 사용하는 기타 소형 선박의 장비 및 구조 세부 사항의 표준화다. 단, ISO/TC 8이 다루고 있는 구명정 및 구명 장비는 제외한다.현재 ISO/TC 188 사무국과 관련해 발행된 표준은 96개며 ISO/TC 188 사무국의 직접적인 책임 하에 발행된 표준은 82개다.ISO/TC 188 사무국과 관련해 개발 중인 표준은 16개며 ISO/TC 188 사무국의 직접적인 책임 하에 개발 중인 표준은 12개다. 참여하고 있는 회원은 22개국, 참관 회원은 23개국이다.□ ISO/TC 188 사무국의 직접적인 책임 하에 발행된 표준 82개 중 15개 목록▷ISO 4566:1992 Small craft with inboard engine — Propeller shaft ends and bosses with 1:10 taper▷ISO 6017:2024 Small craft — Automatic watertight ventilation shutdown system▷ISO 6185-1:2001 Inflatable boats — Part 1: Boats with a maximum motor power rating of 4,5 kW▷ISO 6185-2:2001 Inflatable boats — Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive▷ISO 6185-3:2014 Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater▷ISO 6185-4:2011 Inflatable boats — Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater▷ISO 7840:2021 Small craft — Fire-resistant fuel hoses▷ISO 8099-1:2018 Small craft — Waste systems — Part 1: Waste water retention▷ISO 8099-2:2020 Small craft — Waste systems — Part 2: Sewage treatment systems▷ISO 8469:2021 Small craft — Non-fire-resistant fuel hoses▷ISO 8665:2006 Small craft — Marine propulsion reciprocating internal combustion engines — Power measurements and declarations▷ISO 8666:2020 Small craft — Principal data▷ISO 8845:1994 Small craft with inboard engine — Propeller shaft ends and bosses with 1:16 taper▷ISO 8845:1994/Cor 1:1995 Small craft with inboard engine — Propeller shaft ends and bosses with 1:16 taper — Technical Corrigendum 1▷ISO 8846:1990 Small craft — Electrical devices — Protection against ignition of surrounding flammable gases□ ISO/TC 188 사무국의 직접적인 책임 하에 개발 중인 표준 12개 목록▷ISO/FDIS 6185-3 Inflatable boats — Part 3: Boats with a length of the hull less than 8 m with a motor power rating of 15 kW and greater▷ISO/FDIS 8665-2 Small craft — Power measurements and declarations — Part 2: Electric marine propulsion▷ISO/DIS 8846 Small craft — Electrical devices — Protection against ignition of surrounding flammable gases▷ISO/DIS 10239.2 Small craft — Liquefied petroleum gas (LPG) systems▷ISO 11812:2020/DAmd 1 Small craft — Watertight or quick-draining recesses and cockpits — Amendment 1▷ISO/CD 12215-9 Small craft — Hull construction and scantlings — Part 9: Sailing craft appendages▷ISO/AWI 12217-1 Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull length greater than or equal to 6 m▷ISO/AWI 12217-2 Small craft — Stability and buoyancy assessment and categorization — Part 2: Sailing boats of hull length greater than or equal to 6 m▷ISO/AWI 12217-3 Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m▷ISO/FDIS 15085 Small craft — Protection from falling overboard and means of reboarding▷ISO/DIS 16315 Small craft — Electrical systems used for electrical propulsion▷ISO/CD 23625 Small craft — Lithium-ion batteries□ ISO/TC 188 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 188/SC 1 Personal safety equipment ; 발행된 표준 14개, 개발 중인 표준 4개
-
[기획-디지털 ID 기술] (115)중국공상은행, '블록체인 기반 무선 네트워크 노드 데이터 처리 방법 및 장치' 명칭의 중국 특허 등록(CN 113613241)중국 공상은행(中国工商银行股份有限公司)에 따르면 2024년 1월26일 '블록체인 기반 무선 네트워크 노드 데이터 처리 방법 및 장치(Wireless network node data processing method and device based on block chain)' 명칭의 중국 특허(CN 113613241)가 등록됐다.본 중국 등록 특허(CN 113613241)는 2021년 8월4일 출원(CN 2021-10890838)된 후 중국 특허청에 의해 심사를 받았다.본 중국 등록 특허(CN 113613241)는 무선 네트워크 데이터의 보안 및 개인 처리를 제공하고 무단 액세스와 정보 유출을 방지하기 위한 목적으로 제안됐다. 특히 무선 네트워크에서 데이터 처리를 위한 다목적 솔루션을 제공한다.본 중국 등록 특허(CN 113613241)의 일 실시예에 따른 무선 네트워크 노드 데이터 처리 방법은 하기 절차에 따라 실행된다. 무선 네트워크 노드로부터 이벤트 정보를 획득한다. 무선 네트워크에 있는 노드의 아이디 및 획득된 이벤트 정보에 따라 무선 네트워크 노드의 디지털 아이디 서명을 생성한다. 아이디는 블록체인에 의해 미리 발급된다.무선 네트워크 노드의 개인 키 및 디지털 아이디 서명에 따라 무선 네트워크 노드로부터 획득된 이벤트 정보를 암호화하여 암호화된 데이터 메시지를 생성한다.무선 네트워크 노드의 데이터 처리를 위해 암호화된 데이터 메시지를 블록체인 노드로 전송한다. 이를 통해 전송 과정에서 핫 이벤트 데이터의 안전 및 개인정보보호 문제를 해결할 수 있다.
-
[특집-기술위원회] TC 165 - 목재 구조물(Timber structures)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.△1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.ISO/TC 165 목재 구조물(Timber structures)과 관련된 기술위원회는 1976년 결성됐다. 사무국은 캐나다 표준위원회(Standards Council of Canada, SCC)에서 맡고 있다.위원회는 폴 예를리히(Mr Paul Jaehrlich)가 책임지고 있으며 현재 의장은 잉 추이(Mr Ying Chui)이며 임기는 2024년까지다. ISO 기술 프로그램 관리자는 안나 카테리나 로시(Dr Anna Caterina Rossi), ISO 편집 관리자는 빈센조 바주치(M Vincenzo Bazzucchi) 등으로 조사됐다.범위는 목재, 목재 기반 패널, 기타 목재 기반 제품, 관련 목질계 섬유 재료 등의 구조적 적용에 관한 표준화다. 또한 디자인 요구사항, 재료, 제품, 부품, 구성품의 구조적 특성, 성능 및 설계 값, 관련 구조적, 기계적, 물리적 특성과 성능을 조성하기 위한 테스트 방법 및요구 사항 등도 포함된다.참조 : TC 165의 주제가 구조적이지 않은 목적으로 관련 재료 또는 제품(예 : TC 89 또는 TC 218)의 기술 위원회 주제이기도 한 경우 관련 기술 위원회와 강력한 연락망이 구축된다.현재 ISO/TC 165 사무국의 직접적인 책임 하에 발행된 표준은 54개며 ISO/TC 165 사무국의 직접적인 책임하에 개발 중인 표준은 3개다. 참여하고 있는 회원은 30개국, 참관 회원은 34개국이다.□ ISO/TC 165 사무국의 직접적인 책임 하에 발행된 표준 54개 중 15개 목록▷ISO 5257:2023 Bamboo structures — Engineered bamboo products — Test methods for determination of mechanical properties using small size specimens▷ISO 6891:1983 Timber structures — Joints made with mechanical fasteners — General principles for the determination of strength and deformation characteristics▷ISO 8375:2017 Timber structures — Glued laminated timber — Test methods for determination of physical and mechanical properties▷ISO 8969:2011 Timber structures — Testing of punched metal plate fasteners and joints▷ISO 8970:2020 Timber structures — Testing of joints made with mechanical fasteners — Requirements for timber density▷ISO 9087:1998 Wood - Determination of nail and screw holding power under axial load application▷ISO 9709:2018 Structural timber — Visual strength grading — Basic principles▷ISO 10983:2014 Timber — Finger joints — Minimum production requirements and testing methods▷ISO 10984-1:2009 Timber structures — Dowel-type fasteners — Part 1: Determination of yield moment▷ISO 10984-2:2009 Timber structures — Dowel-type fasteners — Part 2: Determination of embedding strength▷ISO 12122-1:2014 Timber structures — Determination of characteristic values — Part 1: Basic requirements▷ISO 12122-2:2014 Timber structures — Determination of characteristic values — Part 2: Sawn timber▷ISO 12122-3:2016 Timber structures — Determination of characteristic values — Part 3: Glued laminated timber▷ISO 12122-4:2017 Timber structures — Determination of characteristic values — Part 4: Engineered wood products▷ISO 12122-5:2018 Timber structures — Determination of characteristic values — Part 5: Mechanical connections□ ISO/TC 165 사무국의 직접적인 책임 하에 개발중인 표준 3개 목록▷ISO/CD TR 3446 Timber Structures – Determination of characteristic values of sawn timber from tests on Small Clear Wood Specimens▷ISO/DIS 7567 Bamboo structures — Glued laminated bamboo — Product specifications▷ISO/AWI 16229 Timber structures — Laminated strand lumber and oriented strand lumber — Structural properties
-
[미국] 파워인터그레인션, 페어차일드와의 특허침해 손해배상에서 패소미국 법률에 따르면 특허소송은 특허 침해에서 손해를 계산하기 위해 특허권자는 피의자 제품의에서 특허를 제외한 기능이 소비자 요구에 영향을 미치지 않았다는 것을 증명해야 한다.실례로 파워인터그레이션(Power Integrations)는 페어차일드(Fairchild)에게 특허침해 소송을 제기했다. 지방법원에서 배심원은 페어차일드가 약 $1억4000만달러의 손해 배상을 입었다는 사실을 알게됐다.페어차일드는 침해 결정과 손해 배상에 항소했다. 연방순회항소법원은 특허에 따른 기능이 소비자 요구의 기초가 될 때 전체 시장가치 규칙(EMVR)을 기반으로 한 손해배상을 허용한다는 점을 반복해 강조했다.즉 제품에 다른 유용한 기능이 포함된 경우 특허권자는 다른 기능이 구매결정에 영향을 미치지 않았다는 것을 증명해야 한다.이에따라 항소법원은 파워인터그레이션이 이를 증명하지 못했음을 발견했다. 즉 제시된 증거가 전체 시장가치 규칙을 불러 일으키기에 불충분했기 때문에 손해배상을 인정하지 않았다. 국문요약: 연방순회항소법원은 입증부담을 충족하지 못한 특허권자에 대한 손해배상을 무효로 판결했다. "EMVR(entire market value rule)”에 따른 손해배상의 경우에는 특허권자가 “특허를 받지 않은 특징이 소비자가 제품을 구매하지 못하도록 함”는 점을 증명해야 한다. 즉, 특허를 받은 특징에 의해 소비자가 제품을 구매해야 한다.영문요약: Calculating DamagePower Integrations v. Fairchild (FC 2018):History:•Federal Circuit vacated the damage award ($140M) stating that the patentee had not met the burden of proof.•Burden of proof: the patentee seeking entire market value rule (“EMVR”) damages must show that the non-patented features “did not cause consumers to purchase the product.”•Basically, the patented feature should drive the sale of the product to trigger EMVR.•FC still considers the possibility of using EMVR when calculating damages, but it is still disfavored.•When non-patented features of an accused product are “simply generic and/or conventional”, the court would consider applying EMVR.
-
[기획-디지털 ID 표준] ⑫산업단체와 포럼 - 신속 온라인 인증(Fast Identity Online, FIDO)디지털 ID(Digital Identity) 분야에서 상호운용(interoperable)이 가능하고 안전한 서비스 보장을 위한 표준에 대한 수요가 증가하고 있다. 다양한 표준 조직 및 산업 기관이 활동하는 이유다.디지털 ID 표준을 개발하는 곳은 유럽표준화기구(European Standardisation Organistions), 국제표준화기구(International Standardisation Organisations), 상업 포럼 및 컨소시엄, 국가기관 등 다양하다.산업단체와 포럼은 공식적으로 표준화 조직으로 간주되지 않지만 디지털 ID 영역을 포함한 특정 영역에서는 사실상의 표준을 제공하고 있다.몇몇의 경우 이들 단체들이 추가 비준을 위해 자신들이 생산한 사양을 ISO/IEC, ITU 통신 표준화 부문(ITU-T), ETSI 등 표준 기관에 제출할 수 있다.이러한 산업단체 및 포럼에는 △인증기관브라우저 포럼(Certification Authority Browser Forum, CA/Browser Forum) △클라우드 서명 컨소시엄(Cloud Signature Consortium, CSC) △국제자금세탁방지기구(Financial Action Task Force, FATF) △신속온라인인증(Fast Identity Online, FIDO) △국제인터넷표준화기구(Internet Engineering Task Force, IETF) △구조화 정보 표준 개발기구(오아시스)(Organization for the Advancement of Structured Information Standards, OASIS) △오픈ID(OpenID) △SOG-IS(Senior Officials Group-Information Systems Security) △W3C(World Wide Web Consortium) 등이다.신속 온라인 인증(Fast Identity Online, FIDO)은 2013년 2월 출범한 개방형 산업협회다. 전 세계 비밀번호에 대한 과도한 의존을 줄이는 데 도움이 되는 인증 표준을 개발하고 홍보하는 것을 사명으로 삼고 있다.디지털 ID와 관련된 내용은 로밍 인증자와 다른 클라이언트/플랫폼 간 통신을 위한 어플리케이션 계층 프로토콜을 설명하는 클라이언트-인증자 프로토콜(Client to Authenticator Protocol, CTAP)이다.다양한 물리적 매체를 사용해 이 어플리케이션 프로토콜을 다양한 전송 프로토콜에 결합하고 있다. 클라이언트-인증자 프로토콜(Client to Authenticator Protocol, CTAP) 관련 목차를 살펴보면 다음과 같다.목차(table of contents)1. Introduction1.1 Relationship to Other Specifications2. Conformance3. Protocol Structure4. Protocol Overview5. Authenticator API5.1 authenticatorMakeCredential (0x01)5.2 authenticatorGetAssertion (0x02)5.3 authenticatorGetNextAssertion (0x08)5.3.1 Client Logic5.4 authenticatorGetInfo (0x04)5.5 authenticatorClientPIN (0x06)5.5.1 Client PIN Support Requirements5.5.2 Authenticator Configuration Operations Upon Power Up5.5.3 Getting Retries from Authenticator5.5.4 Getting sharedSecret from Authenticator5.5.5 Setting a New PIN5.5.6 Changing existing PIN5.5.7 Getting pinToken from the Authenticator5.5.8 Using pinToken5.5.8.1 Using pinToken in authenticatorMakeCredential5.5.8.2 Using pinToken in authenticatorGetAssertion5.5.8.3 Without pinToken in authenticatorGetAssertion5.6 authenticatorReset (0x07)6. Message Encoding6.1 Commands6.2 Responses6.3 Status codes7. Interoperating with CTAP1/U2F authenticators7.1 Framing of U2F commands7.1.1 U2F Request Message Framing ### (#u2f-request-message-framing)7.1.2 U2F Response Message Framing ### (#u2f-response-message-framing)7.2 Using the CTAP2 authenticatorMakeCredential Command with CTAP1/U2F authenticators7.3 Using the CTAP2 authenticatorGetAssertion Command with CTAP1/U2F authenticators8. Transport-specific Bindings8.1 USB Human Interface Device (USB HID)8.1.1 Design rationale8.1.2 Protocol structure and data framing8.1.3 Concurrency and channels8.1.4 Message and packet structure8.1.5 Arbitration8.1.5.1 Transaction atomicity, idle and busy states.8.1.5.2 Transaction timeout8.1.5.3 Transaction abort and re-synchronization8.1.5.4 Packet sequencing8.1.6 Channel locking8.1.7 Protocol version and compatibility8.1.8 HID device implementation8.1.8.1 Interface and endpoint descriptors8.1.8.2 HID report descriptor and device discovery8.1.9 CTAPHID commands8.1.9.1 Mandatory commands8.1.9.1.1 CTAPHID_MSG (0x03)8.1.9.1.2 CTAPHID_CBOR (0x10)8.1.9.1.3 CTAPHID_INIT (0x06)8.1.9.1.4 CTAPHID_PING (0x01)8.1.9.1.5 CTAPHID_CANCEL (0x11)8.1.9.1.6 CTAPHID_ERROR (0x3F)8.1.9.1.7 CTAPHID_KEEPALIVE (0x3B)8.1.9.2 Optional commands8.1.9.2.1 CTAPHID_WINK (0x08)8.1.9.2.2 CTAPHID_LOCK (0x04)8.1.9.3 Vendor specific commands8.2 ISO7816, ISO14443 and Near Field Communication (NFC)8.2.1 Conformance8.2.2 Protocol8.2.3 Applet selection8.2.4 Framing8.2.4.1 Commands8.2.4.2 Response8.2.5 Fragmentation8.2.6 Commands8.2.6.1 NFCCTAP_MSG (0x10)8.2.6.2 NFCCTAP_GETRESPONSE (0x11)8.3 Bluetooth Smart / Bluetooth Low Energy Technology8.3.1 Conformance8.3.2 Pairing8.3.3 Link Security8.3.4 Framing8.3.4.1 Request from Client to Authenticator8.3.4.2 Response from Authenticator to Client8.3.4.3 Command, Status, and Error constants8.3.5 GATT Service Description8.3.5.1 FIDO Service8.3.5.2 Device Information Service8.3.5.3 Generic Access Profile Service8.3.6 Protocol Overview8.3.7 Authenticator Advertising Format8.3.8 Requests8.3.9 Responses8.3.10 Framing fragmentation8.3.11 Notifications8.3.12 Implementation Considerations8.3.12.1 Bluetooth pairing: Client considerations8.3.12.2 Bluetooth pairing: Authenticator considerations8.3.13 Handling command completion8.3.14 Data throughput8.3.15 Advertising8.3.16 Authenticator Address Type9. Defined Extensions9.1 HMAC Secret Extension (hmac-secret)10. IANA Considerations10.1 WebAuthn Extension Identifier Registrations11S ecurity ConsiderationsIndexTerms defined by this specificationTerms defined by referenceReferencesNormative ReferencesInformative ReferencesIDL Index
-
[특집-기술위원회] TC 131 - 유체동력시스템(Fluid power systems)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 등이다.△1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111, △1964년 TC 112~TC 115, TC 117, △1965년 TC 118, △1966년 TC 119~TC 122, △1967년 TC 123, △1968년 TC 126, TC 127 등도 포함된다.ISO/TC 131 유체동력시스템(Fluid power systems)과 관련된 기술위원회는 TC 130과 마찬가지로 1969년에 결성됐다. 사무국은 미국 국립표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 앨리슨 포사이드(Mrs Allison Forsythe)가 책임지고 있다. 현재 의장은 이반 셰필드(Mr Ivan Sheffield)로 임기는 2026년까지다.ISO 기술 프로그램 관리자는 키르시 실란데르-반 후넨(Mrs Kirsi Silander-van Hunen), ISO 편집 관리자는 ISO 편집팀(ISO Editing Team) 등으로 조사됐다.범위는 용어, 구성, 주요 치수, 안전 요구 사항, 테스트 및 검사 방법으로 구성된 유체 동력 시스템 및 구성 요소 분야의 표준화다.TC 131 표준화에 다음과 같은 구성 요소들이 포함된다. △어큐뮬레이터 △압축 공기 건조기 △도체(단단하고 유연한) △실린더 △전기 유압 및 전기 공압 구성 요소와 시스템 △피팅 △유체 장치 △호스 피팅 및 어셈블리 △필터 및 분리기 △유체 △유압 펌프 △모터 △가동부 유체 제어 장치 △공압 윤활 장치 △조절기 △퀵 액션 커플링 △저장소 △밀봉 장치 △밸브 등이다.현재 ISO/TC 131 사무국과 관련해 발행된 표준은 237개며 ISO/TC 131 사무국의 직접적인 책임 하에 발행된 표준은 10개다. ISO/TC 130 사무국과 관련해 개발 중인 표준은 20개다. 참여하고 있는 회원은 16개국, 참관 회원은 19개국이다.□ ISO/TC 130 사무국 분과위원회(Subcommittee)의 책임 하에 발행된 표준 10개 목록▷ISO 2944:2000 Fluid power systems and components — Nominal pressures▷ISO 5352-1:2023 Hydraulic fluid power — Determination of discharge flow rate and thermal losses of gas loaded accumulators — Part 1: Test method▷ISO/TR 10946:2019 Hydraulic fluid power — Gas-loaded accumulators with separator — Selection of preferred hydraulic ports▷ISO/TR 16194:2017 Pneumatic fluid power — Assessment of component reliability by accelerated life testing — General guidelines and procedures▷ISO 19973-1:2015 Pneumatic fluid power — Assessment of component reliability by testing — Part 1: General procedures▷ISO 19973-2:2015 Pneumatic fluid power — Assessment of component reliability by testing — Part 2: Directional control valves▷ISO 19973-2:2015/Amd 1:2019 Pneumatic fluid power — Assessment of component reliability by testing — Part 2: Directional control valves — Amendment 1▷ISO 19973-3:2015 Pneumatic fluid power — Assessment of component reliability by testing — Part 3: Cylinders with piston rod▷ISO 19973-4:2014 Pneumatic fluid power — Assessment of component reliability by testing — Part 4: Pressure regulators▷ISO 19973-5:2015 Pneumatic fluid power — Assessment of component reliability by testing — Part 5: Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves□ ISO/TC 131 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 131/SC 1 Symbols, terminology and classifications ; 발행된 표준 7개, 개발 중인 표준 1개▷ISO/TC 131/SC 2 Pumps, motors and integral transmissions ; 발행된 표준 5개, 개발 중인 표준 0개▷ISO/TC 131/SC 3 Cylinders ; 발행된 표준 24개, 개발 중인 표준 1개▷ISO/TC 131/SC 4 Connectors and similar products and components ; 발행된 표준 50개, 개발 중인 표준 2개▷ISO/TC 131/SC 5 Control products and components ; 발행된 표준 50개, 개발 중인 표준 4개▷ISO/TC 131/SC 6 Contamination control ; 발행된 표준 38개, 개발 중인 표준 5개▷ISO/TC 131/SC 7 Sealing devices ; 발행된 표준 27개, 개발 중인 표준 2개▷ISO/TC 131/SC 8 Product testing ; 발행된 표준 22개, 개발 중인 표준 4개▷ISO/TC 131/SC 9 Installations and systems ; 발행된 표준 4개, 개발 중인 표준 1개□ ISO/TC 131 사무국의 작업그룹(Working Group, WG) 현황▷ISO/TC 131/WG 1 Accumulators▷ISO/TC 131/WG 4 Determination of the reliability of pneumatic components by testing
-
[기획-디지털 ID 기술] ⑲소닉월, '무선 메시 네트워크에서 탄성 보안 서비스 및 로드 밸런싱' 명칭의 미국 특허 등록 (US 11729621)미국 사이버 보안 기업 소닉월(SONICWALL)에 따르면 2023년 8월15일 '무선 메시 네트워크에서 탄성 보안 서비스 및 로드 밸런싱(Elastic security services and load balancing in a wireless mesh network)' 명칭의 미국 특허(US 11729621)가 등록됐다.본 등록 특허는 2019년 4월29일 출원된(US 16/397951) 후 2022년 4월19일 등록된 원출원건(US 2020-0344610)을 우선권 주장해 2022년 4월 8일에 출원됐다(US 17/716860).본 등록 특허의 패밀리 특허에는 3건의 미국 특허(US 11310665, US 11438963, US 11540132)가 등록됐고, 2건의 미국 특허(US 2022-0418041, US 2023-0209350)가 심사 중이다. 본 등록 특허는 무선 네트워크에서 상이한 노드 전반에 걸쳐 처리 능력을 분배하는 시스템에 관한 특허다.특히 서로 다른 무선 노드가 각각의 무선 노드와 연관된 캐시에서 요청된 콘텐츠에 관한 콘텐츠 등급을 수신하고 저장하도록 함으로써 네트워크 내의 다른 노드로의 통신 전달 필요성을 최소화한다. 이를 통해 무선 네트워크에서 통신 효율을 증가시킬 수 있다.또한 본 등록 특허는 메시징 트래픽을 증가시키지 않고 무선 네트워크에서 콘텐츠 등급을 다른 노드에 분배하기 때문에 로드 밸런싱 기능을 수행한다.액세스 요청에 관한 응답 메시지가 요청자에게 다시 전달됨에 따라, 통신 경로를 따르는 노드에서의 캐시 메모리는 수신된 콘텐츠 등급을 가진 데이터 식별자를 참조하는 정보를 포함하도록 업데이트된다.상기 교차 참조된 데이터 식별자 및 콘텐츠 등급은 통신 경로를 따라 각 무선 노드가 불량 콘텐츠에 대한 요청을 차단할 수 있게 허용한다.
-
[특집-공동기술위원회] ⑤JTC 1/SC 6 시스템 간 통신 및 정보 교환(Telecommunications and information exchange between systems)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(Working Group, WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등을 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.또한 국제전기기술위원회(International Electro-technical Commission, IEC)는 전기 및 전자 제품의 고품질 인프라와 국제 무역을 뒷받침하는 글로벌 비영리 회원 조직이다.기술 혁신, 저렴한 인프라 개발, 효율적이고 지속 가능한 에너지 접근, 스마트 도시화 및 교통 시스템, 기후 변화 완화를 촉진하고 사람과 환경의 안전을 향상시키는 역할을 수행하고 있다. 170개 이상의 국가를 통합하고 전 세계 2만명의 전문가에게 글로벌하고 중립적이며 독립적인 표준화 플랫폼을 제공하고 있다. 장치, 시스템, 설치, 서비스 및 인력이 필요에 따라 작동함을 구성원이 인증하는 4가지 적합성 평가 시스템을 관리한다.적합성 평가와 함께 정부가 국가 품질 인프라를 구축하고 모든 규모의 기업이 전 세계 대부분의 국가에서 일관되게 안전하고 신뢰할 수 있는 제품을 사고 팔 수 있도록 하는 기술 프레임워크를 제공하는 약 1만개의 IEC 국제표준을 발행하고 있다.이러한 ISO와 IEC가 공동으로 구성한 기술위원회 ISO/IEC JTC 1 정보 기술(Information technology)에 대해 살펴볼 예정이다. JTC 1은 1987년에 결성됐으며 사무국은 미국국립표준협회(American National Standards Institute, ANSI)에서 맡고 있다. 위원회는 리사 라지첼(Mrs Lisa Rajchel)가 책임지고 있다. 현재 의장은 필 웬블롬(Mr Phil Wennblom)으로 임기는 202년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), 스티븐 더트널(Mr Stephen Dutnall), ISO 편집 관리자는 앨리슨 레이드 자몬드(Ms Alison Reid-Jamond) 등으로 조사됐다. 범위는 정보기술 분야의 표준화다.현재 ISO/IEC JTC 1의 직접적인 책임 하에 발행된 표준은 517개며 직접적인 책임 하에 개발중인 표준은 23개다. 참여하고 있는 회원은 40개국, 참관 회원은 62개국이다.공동 기술위원회(Joint Technical Committee, JTC) 산하에서 활동하고 있는 분과위원회(Subcommittee, SC) 중 SC 1, SC 2에 이어 SC 6에 대해 살펴보면 다음과 같다.ISO/IEC JTC 1/SC 6 시스템간 통신 및 정보 교환(Telecommunications and information exchange between systems)과 관련된 분과위원회는 1988년 결성됐다. 사무국은 한국 국가기술표준원(Korean Agency for Technology and Standards, KATS)에서 맡고 있다.위원회는 오정엽(Mr Jungyup OH)이 책임지고 있다. 현재 의장은 강현국(Dr Hyun Kook Kahng)으로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), ISO 편집 관리자는 클라우디아 루에제(Ms Claudia Lueje) 등으로 조사됐다.범위는 사용 조건 뿐 아니라 시스템 기능, 절차, 매개변수를 포함해 개방형 시스템 간의 정보 교환을 다루는 통신 분야 표준화 작업을 진행해 왔다.이 표준화는 물리적, 데이터 링크, 네트워크 및 전송을 포함한 하위 계층의 프로토콜과 서비스뿐만 아니라 디렉토리 및 ASN.1(MFAN, NFC, PLC, 미래 네트워크 및 OID)을 포함하되 이에 국한되지 않는 상위 계층의 프로토콜 및 서비스를 포함하고 있다.현재 ISO/IEC JTC 1/SC 6 사무국의 직접적인 책임 하에 발행된 표준은 397개며 개발 중인 표준은 18개다. 참여하고 있는 회원은 19명, 참관 회원은 36명이다.□ ISO/IEC JTC 1/SC 6 사무국의 직접적인 책임하에 발행된 표준 및(또는) 프로젝트 397개 중 15개 목록▷ISO 1155:1978 Information processing — Use of longitudinal parity to detect errors in information messages▷ISO 1177:1985 Information processing — Character structure for start/stop and synchronous character oriented transmission▷ISO 1745:1975 Information processing — Basic mode control procedures for data communication systems▷ISO 2110:1989 Information technology — Data communication — 25-pole DTE/DCE interface connector and contact number assignments▷ISO 2110:1989/Amd 1:1991 Information technology — Data communication — 25-pole DTE/DCE interface connector and contact number assignments — Amendment 1: Interface connector and contact number assignments for a DTE/DCE interface for data signalling rates above 20 000 bit/s per second▷ISO/IEC 2593:2000 Information technology — Telecommunications and information exchange between systems — 34-pole DTE/DCE interface connector mateability dimensions and contact number assignments▷ISO 2628:1973 Basic mode control procedures — Complements▷ISO 2629:1973 Basic mode control procedures — Conversational information message transfer▷ISO/IEC 4005-1:2023 Telecommunications and information exchange between systems — Unmanned aircraft area network (UAAN) — Part 1: Communication model and requirements▷ISO/IEC 4005-2:2023 Telecommunications and information exchange between systems — Unmanned aircraft area network (UAAN) — Part 2: Physical and data link protocols for shared communication▷ISO/IEC 4005-3:2023 Telecommunications and information exchange between systems — Unmanned aircraft area network (UAAN) — Part 3: Physical and data link protocols for control communication▷ISO/IEC 4005-4:2023 Telecommunications and information exchange between systems — Unmanned aircraft area network (UAAN) — Part 4: Physical and data link protocols for video communication▷ISO 4902:1989 Information technology — Data communication — 37-pole DTE/DCE interface connector and contact number assignments▷ISO 4903:1989 Information technology — Data communication — 15-pole DTE/DCE interface connector and contact number assignments▷ISO/IEC 5021-1:2023 Telecommunications and information exchange between systems — Wireless LAN access control — Part 1: Networking architecture▷ISO/IEC 5021-2:2023 Telecommunications and information exchange between systems — Wireless LAN access control — Part 2: Dispatching platform□ ISO/IEC JTC 1/SC 6 사무국의 직접적인 책임하에 개발중인 표준 및(또는) 프로젝트 18개 중 15개 목록▷ISO/IEC PRF 4396-1 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 1: Reference model▷ISO/IEC PRF 4396-2 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 2: Common application connection establishment protocol▷ISO/IEC PRF 4396-3 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 3: Common distributed application protocol▷ISO/IEC PRF 4396-4 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 4: Complete enrolment procedures▷ISO/IEC PRF 4396-5 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 5: Incremental enrolment procedures▷ISO/IEC PRF 4396-6 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 6: RINA data transfer service▷ISO/IEC PRF 4396-7 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 7: Flow allocator▷ISO/IEC PRF 4396-8 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 8: RINA general delimiting procedures▷ISO/IEC PRF 4396-9 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 9: Error and flow control protocol▷ISO/IEC/IEEE DIS 8802-1Q Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 1Q: Bridges and bridged networks▷ISO/IEC 9594-8:2020/CD Cor 2 Information technology — Open systems interconnection — Part 8: The Directory: Public-key and attribute certificate frameworks — Technical Corrigendum 2▷ISO/IEC 9594-11:2020/CD Cor 1 Information technology — Open systems interconnection directory — Part 11: Protocol specifications for secure operations — Technical Corrigendum 1▷ISO/IEC 9594-11:2020/DAmd 1 Information technology — Open systems interconnection directory — Part 11: Protocol specifications for secure operations — Amendment 1▷ISO/IEC DIS 9594-12 Information technology — Open systems interconnection — Part 12: The Directory: Key management and public-key infrastructure establishment and maintenance▷ISO/IEC FDIS 18092 Telecommunications and information exchange between systems — Near Field Communication Interface and Protocol 1 (NFCIP-1)