검색결과
-
[특집-기술위원회] TC 210 - 의료기기를 포함한 건강 목적 제품의 품질 관리 및 이에 상응하는 일반적인 측면(Quality management and corresponding general aspects for products with a health purpose including medical devices스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 등이 있다.ISO/TC 210 의료기기를 포함한 건강 목적 제품의 품질 관리 및 이에 상응하는 일반적인 측면(Quality management and corresponding general aspects for products with a health purpose including medical devices)과 관련된 기술위원회는 1994년 결성됐다. 사무국은 미국 표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 아미르 어바우탈레브(Mr Amir Aboutaleb)가 책임지고 있다. 현재 의장은 스콧 A. 콜번(Mr Scott A. Colburn)이며 임기는 2025년말까지다. ISO 기술 프로그램 관리자는 키르시 실란데르-반 후넨(Mrs Kirsi Silander-van Hunen), ISO 편집 관리자는 클라우디아 루에제(Ms Claudia Lueje) 등이다.범위는 액체 및 가스용 커넥터를 포함하는 건강 목적의 제품에 대한 품질 관리 및 상응하는 일반적인 측면과 관련한 분야의 요구 사항 및 지침에 관한 표준화다.단, △ISO/TC 176에서 다루는 일반 품질 관리 표준 △의약품 및 의료 서비스에 대한 품질 관리 표준은 제외한다.참고로 건강 목적의 제품에는 의료 기기, 인접 제품(또는 액세서리라고도 할 수 있음) 및 의료 기기와 유사한 위험 프로필을 가진 제품을 포함해 건강과 관련된 사용을 위한 제품이 포함된다.현재 ISO/TC 210 사무국의 직접적인 책임 하에 발행된 표준은 30개며 ISO/TC 210 사무국의 직접적인 책임 하에 개발 중인 표준은 13개다. 참여하고 있는 회원은 39개국, 참관 회원은 28개국이다.□ ISO/TC 210 사무국의 직접적인 책임 하에 발행된 표준 30개 중 15개 목록▷ISO 13485:2016 Medical devices — Quality management systems — Requirements for regulatory purposes▷ISO 14971:2019 Medical devices — Application of risk management to medical devices▷ISO 15223-1:2021 Medical devices — Symbols to be used with information to be supplied by the manufacturer — Part 1: General requirements▷ISO 15223-2:2010 Medical devices — Symbols to be used with medical device labels, labelling, and information to be supplied — Part 2: Symbol development, selection and validation▷ISO 18250-1:2018 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 1: General requirements and common test methods▷ISO 18250-3:2018 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 3: Enteral applications▷ISO 18250-6:2019 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 6: Neural applications▷ISO 18250-7:2018 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 7: Connectors for intravascular infusion▷ISO 18250-8:2018 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 8: Citrate-based anticoagulant solution for apheresis applications▷ISO/TR 20416:2020 Medical devices — Post-market surveillance for manufacturers▷ISO 20417:2021 Medical devices — Information to be supplied by the manufacturer▷ISO/TR 24971:2020 Medical devices — Guidance on the application of ISO 14971▷IEC 62304:2006 Medical device software — Software life cycle processes▷IEC 62304:2006/Amd 1:2015 Medical device software — Software life cycle processes — Amendment 1▷IEC 62366-1:2015 Medical devices — Part 1: Application of usability engineering to medical devices□ ISO/TC 210 사무국의 직접적인 책임 하에 개발 중인 표준 13개 목록▷ISO/WD TS 5137 Medical device maintenance management for healthcare delivery organizations▷ISO 15223-1:2021/AWI Amd 1 Medical devices — Symbols to be used with information to be supplied by the manufacturer — Part 1: General requirements — Amendment 1▷ISO/AWI 15223-2 Medical devices — Symbols to be used with medical device labels, labelling, and information to be supplied — Part 2: Symbol development, selection and validation▷ISO/AWI 18250-3 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 3: Enteral applications▷ISO 18250-8:2018/AWI Amd 1 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 8: Citrate-based anticoagulant solution for apheresis applications — Amendment 1▷ISO/CD 20417 Medical devices — Information to be supplied by the manufacturer▷ISO/AWI 23421 Medical devices — Terminology — Terms used in the field of quality management and corresponding general aspects for products with a health purpose including medical devices▷ISO/CD TS 24971-2 Medical devices — Guidance on the application of ISO 14971 — Part 2: Machine learning in artificial intelligence▷ISO/DIS 80369-1 Small-bore connectors for liquids and gases in healthcare applications — Part 1: General requirements▷ISO/FDIS 80369-2 Small-bore connectors for liquids and gases in healthcare applications — Part 2: Connectors for respiratory applications▷IEC/AWI 80369-5 Small-bore connectors for liquids and gases in healthcare applications — Part 5: Connectors for limb cuff inflation applications▷ISO/DIS 80369-6 Small bore connectors for liquids and gases in healthcare applications — Part 6: Connectors for neural applications▷ISO/FDIS 80369-20 Small-bore connectors for liquids and gases in healthcare applications — Part 20: Common test methods
-
[특집-기술위원회] TC 207 - 환경경영(Environmental management)… 사무국은 캐나다 표준위원(SCC)에서 맡아스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 등이 있다.ISO/TC 207 환경경영(Environmental management)과 관련된 기술위원회는 1993년 결성됐다. 사무국은 캐나다 표준위원(Standards Council of Canada, SCC)에서 맡고 있다. 부의장은 다니엘 트릴로스(Mr Daniel Trillos)로 2024년까지 임기를 맡고 있다.위원회는 크리스틴 게라티(Mrs Christine Geraghty)가 책임지고 있다. 현재 의장은 자키아 카삼(Ms Zakiah Kassam)이며 임기는 2026년 말까지다. ISO 기술 프로그램 관리자는 호세 알코르타(Mr José Alcorta), ISO 편집 관리자는 니콜라 페루(Ms Nicola Perou) 등이다.범위는 지속가능한 개발을 지원하기 위해 관련된 사회적, 경제적 측면을 포함해 환경 및 기후 영향을 다루기 위한 환경경영 분야의 표준화다. 단, 오염물질 시험방법, 환경성능 한계치 및 수준 설정, 제품 표준화 등은 제외한다.참고로 TC 207은 환경경영시스템, 감사, 검증/확인, 관련 조사, 환경 라벨링, 환경 성능 평가, 수명주기 평가, 기후 변화 및 완화와 적응, 에코디자인, 재료 효율성 환경 경제, 환경 및 기후 금융 등에 초점을 맞추고 있다. 적절한 경우 ISO/TC 207은 환경 경영을 지원할 수 있는 주제에 관해 기존 위원회와 협력해 작업하게 된다.현재 ISO/TC 207 사무국과 관련해 발행된 표준은 69개며 ISO/TC 207 사무국의 직접적인 책임 하에 발행된 표준은 3개다. ISO/TC 207 사무국과 관련해 개발 중인 표준은 21개다. 참여하고 있는 회원은 79개국, 참관 회원은 45개국이다.□ ISO/TC 207 사무국의 직접적인 책임 하에 발행된 표준 69개 중 3개 목록▷ISO Guide 64:2008 Guide for addressing environmental issues in product standards▷ISO 14050:2020 Environmental management — Vocabulary▷IEC 62430:2019 Environmentally conscious design (ECD) — Principles, requirements and guidance□ ISO/TC 207 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 207/SC 1 Environmental management systems ; 발행된 표준 13개, 개발 중인 표준 5개▷ISO/TC 207/SC 2 Environmental auditing and related practices ; 발행된 표준 3개, 개발 중인 표준 3개▷ISO/TC 207/SC 3 Environmental labelling ; 발행된 표준 8개, 개발 중인 표준 3개▷ISO/TC 207/SC 4 Environmental performance evaluation ; 발행된 표준 9개, 개발 중인 표준 1개▷ISO/TC 207/SC 5 Life cycle assessment ; 발행된 표준 16개, 개발 중인 표준 5개▷ISO/TC 207/SC 7 Greenhouse gas and climate change management and related activities ; 발행된 표준 17개, 개발 중인 표준 4개
-
[특집-기술위원회] TC 205 - 건축 환경 디자인(Building environment design)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 △1988년 TC 192~TC 194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 등이 있다.ISO/TC 205 건축 환경 디자인(Building environment design)과 관련된 기술위원회는 TC 204와 마찬가지로 1992년 결성됐다. 사무국은 미국 표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 라이언 섄리(Mr Ryan Shanley)가 책임지고 있다. 현재 의장은 드레이크 에르베(Mr Drake Erbe)이며 임기는 2025년말 까지다.ISO 기술 프로그램 관리자는 스테판 소바쥬(M Stéphane Sauvage), ISO 편집 관리자는 클라우디아 루에제(Ms Claudia Lueje) 등이다.범위는 수용 가능한 실내 환경 및 실행 가능한 에너지 절약, 효율성을 위해 신규 건물의 설계 및 기존 건물 개조에 관한 표준화다.건축 환경 설계는 기술적 건축 시스템 및 관련 건축 측면을 다루며 관련 설계 프로세스, 설계 방법, 설계 결과 및 설계 단계 건물 커미셔닝을 포함하고 있다. 실내 환경에는 공기질과 열, 음향, 시각적 요소가 포함된다. 다음 내용들도 표준화에 포함된다.세부적으로 보면 △건물 설계 및 기존 건물 개조 설계에서 다룰 수 있는 실내 환경 품질 및 에너지와 관련된 지속 가능성 측면 △건축 환경 설계의 일반 원칙 △에너지 효율적인 건물 설계 △건물 및 개조 설계의 건물 자동화 및 제어 시스템 △건물 및 개조 설계의 실내 공기질 △건물의 실내 열 환경 및 개조 설계 △건물 및 개조 설계의 실내 음향 환경 △건물의 실내 시각적 환경 및 개조 설계 △복사를 포함한 냉난방 시스템 설계 △새 건물 및 개조 설계에 건물 환경 장비의 성능을 테스트하고 평가하는 방법의 적용 등이다.전체적인 접근 방식을 사용하는 ISO/TC163/WG4 공동 작업 그룹 TC 163 및 TC 205 에너지 성능 ISO/TC163/WG4 Joint working group TC 163 & TC 205 Energy performance)을 통해 ISO/TC 163과의 긴밀한 협력을 통해 건물 개조 뿐 아니라 신규 및 기존 건물의 에너지 성능에 관한 전체적인 평가의 표준화도 포함된다.표준화에는 △용어 및 정의 △건물 및 기술 시스템의 시스템 경계 △건축 요소의 에너지 성능을 고려한 건물의 전반적인 에너지 성능 평가 △건물 관련 시스템(난방, 냉방, 가정용 온수, 환기, 조명, 시스템 제어, 운송 및 기타 에너지 관련 시스템) △실내 및 실외 조건 △지역 에너지 생산(현장 및 지역 수준) △(사용) 에너지원(재생 가능 포함) △건물 커미셔닝 △전반적인 에너지 효율 평가 △건축물의 에너지 성능 및 에너지 성능 인증을 나타내는 수단 등이 있다.다만 △기타 인체공학적 요인 △대기 오염물질과 열, 음향 및 조명 특성을 측정하는 방법 △건축 환경의 열 성능 및 에너지 사용(ISO TC 163) △기존 건물의 건물 환경 장비 성능 및 등급을 테스트하는 방법 △기존 건물을 검사하거나 평가 △건설 등은 제외한다.현재 ISO/TC 205 사무국의 직접적인 책임 하에 발행된 표준은 49개며 ISO/TC 205 사무국의 직접적인 책임하에 개발 중인 표준은 10개다. 참여하고 있는 회원은 26개국, 참관 회원은 34개국이다.□ ISO/TC 205 사무국의 직접적인 책임 하에 발행된 표준 49개 중 15개 목록▷ISO 11855-1:2021 Building environment design — Embedded radiant heating and cooling systems — Part 1: Definitions, symbols, and comfort criteria▷ISO 11855-1:2021/Amd 1:2023 Building environment design — Embedded radiant heating and cooling systems — Part 1: Definitions, symbols, and comfort criteria — Amendment 1▷ISO 11855-2:2021 Building environment design — Embedded radiant heating and cooling systems — Part 2: Determination of the design heating and cooling capacity▷ISO 11855-2:2021/Amd 1:2023 Building environment design — Embedded radiant heating and cooling systems — Part 2: Determination of the design heating and cooling capacity — Amendment 1▷ISO 11855-3:2021 Building environment design — Embedded radiant heating and cooling systems — Part 3: Design and dimensioning▷ISO 11855-3:2021/Amd 1:2023 Building environment design — Embedded radiant heating and cooling systems — Part 3: Design and dimensioning — Amendment 1▷ISO 11855-4:2021 Building environment design — Embedded radiant heating and cooling systems — Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS)▷ISO 11855-4:2021/Amd 1:2023 Building environment design — Embedded radiant heating and cooling systems — Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) — Amendment 1▷ISO 11855-5:2021 Building environment design — Embedded radiant heating and cooling systems — Part 5: Installation▷ISO 11855-5:2021/Amd 1:2023 Building environment design — Embedded radiant heating and cooling systems — Part 5: Installation — Amendment 1▷ISO 11855-6:2018 Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 6: Control▷ISO 11855-6:2018/Amd 1:2023 Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 6: Control — Amendment 1▷ISO 11855-7:2019 Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 7: Input parameters for the energy calculation▷ISO 11855-7:2019/Amd 1:2024 Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 7: Input parameters for the energy calculation — Amendment 1▷ISO 11855-8:2023 Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 8: Electrical heating systems□ ISO/TC 205 사무국의 직접적인 책임 하에 개발 중인 표준 10개 목록▷ISO/TR 5863 Integrative design of the building envelope — General principles▷ISO/DIS 16484-2 Building automation and control systems (BACS) — Part 2: Hardware▷ISO/DIS 16484-4 Building automation and control systems (BACS) — Part 4: Control applications▷ISO/DIS 16813 Building environment design — Indoor environment — General principles▷ISO/WD 20734 Building Enviroment Design — Daylighting design procedure for indoor visual environment▷ISO/WD 21075 Design and assessment process of whole-building mechanical ventilation systems in residential buildings▷ISO/WD 22511-1 Design process of ventilative cooling systems — Part 1: Non-residential buildings▷ISO/AWI TS 23764 Methodology for achieving non-residential zero-energy buildings (ZEBs)▷ISO/CD 24359-1 Building commissioning process planning — Part 1: New buildings▷ISO/AWI TR 52032-2 Energy performance of buildings — Energy requirements and efficiencies of heating, cooling and domestic hot water (DHW) distribution systems — Part 2: Explanation and justification of ISO 52032-1
-
[특집-기술위원회] TC 204 - 지능형 교통시스템(Intelligent transport systems)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 △1988년 TC 192~TC 194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 등이 있다.ISO/TC 204 지능형 교통시스템(Intelligent transport systems)과 관련된 기술위원회는 1992년 결성됐다. 사무국은 미국 표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 제니퍼 콜린스(Ms Jennifer Collins)가 책임지고 있다. 현재 의장은 쿠로시 올리아이(Mr Koorosh Olyai)이며 임기는 2025년말 까지다.ISO 기술 프로그램 관리자는 하킴 음킨시(Mr Hakim Mkinsi), ISO 편집 관리자는 앨리슨 레이드 자몬드(Ms Alison Reid-Jamond) 등이다.범위는 도시 및 농촌 지상 교통 분야의 정보, 통신 및 제어 시스템 표준화다. 표준화에는 인터모달 및 멀티모달 측면, 여행자 정보, 교통 관리, 대중 교통, 상업 교통, 긴급 서비스, 지능형 교통 시스템(intelligent transport systems, ITS) 분야 상업 서비스 등을 포함하고 있다. 단, 차량 내 운송 정보 및 제어 시스템(ISO/TC 22)은 제외한다.참고로 ISO/TC 204는 지능형 교통 시스템(ITS)의 전반적인 시스템 측면과 인프라 측면을 담당하고 있다. 기존 국제 표준화 기관의 작업을 고려한 표준 개발 일정을 포함해 이 분야의 전반적인 ISO 작업 프로그램을 조정하고 있다.현재 ISO/TC 204 사무국의 직접적인 책임 하에 발행된 표준은 338개며 ISO/TC 204 사무국의 직접적인 책임하에 개발 중인 표준은 67개다. 참여하고 있는 회원은 33개국, 참관 회원은 28개국이다.□ ISO/TC 204 사무국의 직접적인 책임 하에 발행된 표준 338개 중 15개 목록▷ISO 4272:2022 Intelligent transport systems — Truck platooning systems (TPS) — Functional and operational requirements▷ISO 4273:2024 Intelligent transport systems — Automated braking during low-speed manoeuvring (ABLS) — Requirements and test procedures▷ISO/TR 4286:2021 Intelligent transport systems — Use cases for sharing of probe data▷ISO/TS 4398:2022 Intelligent transport systems — Guided transportation service planning data exchange▷ISO 4426:2021 Intelligent transport systems — Lower layer protocols for usage in the European digital tachograph▷ISO/TR 4445:2021 Intelligent transport systems — Mobility integration — Role model of ITS service application in smart cities▷ISO/TR 4447:2022 Intelligent transport systems — Mobility integration — Comparison of two mainstream integrated mobility concepts▷ISO/TS 5206-1:2023 Intelligent transport systems — Parking — Part 1: Core data model▷ISO/TS 5255-1:2022 Intelligent transport systems — Low-speed automated driving system (LSADS) service — Part 1: Role and functional model▷ISO/TR 5255-2:2023 Intelligent transport systems — Low-speed automated driving system (LSADS) service — Part 2: Gap analysis▷ISO 5345:2022 Intelligent transport systems — Identifiers▷ISO/TR 6026:2022 Electronic fee collection — Pre-study on the use of vehicle licence plate information and automatic number plate recognition (ANPR) technologies▷ISO/TR 7872:2022 Intelligent transport systems — Mobility integration — Digital infrastructure service role and functional model for urban ITS service applications▷ISO/TR 7878:2023Intelligent transport systems — Mobility integration — Enterprise view▷ISO 10711:2012 Intelligent Transport Systems — Interface Protocol and Message Set Definition between Traffic Signal Controllers and Detectors□ ISO/TC 204 사무국의 직접적인 책임 하에 개발 중인 표준 67개 중 15개 목록▷ISO/CD TR 4448-1 Intelligent transport systems — Public-area Mobile Robots (PMR) — Part 1: Overview of paradigm▷ISO/AWI TS 4448-16 Intelligent transport systems — Public-area Mobile Robots (PMR) — Part 16: 16▷ISO/AWI TS 5087-3 Information technology — City data model — Part 3: Service level concepts -Transportation planning▷ISO/CD TR 6029-1.2 Intelligent transport systems — Seamless positioning for multimodal transportation in ITS stations — Part 1: General information and use case definition▷ISO/AWI 6029-2 Intelligent transport systems — Seamless positioning for multimodal transportation in ITS stations — Part 2: Nomadic and mobile device dataset for positioning data fusion▷ISO/DTS 7815-1 Intelligent transport systems — Telematics applications for regulated commercial freight vehicles (TARV) using ITS stations — Part 1: Secure vehicle interface framework and architecture▷ISO/DTS 7815-2 Intelligent transport systems — Telematics applications for regulated commercial freight vehicles (TARV) using ITS stations — Part 2: Specification of the secure vehicle interface▷ISO/CD 7856 Intelligent transport systems —Remote support for low speed automated driving systems (RS-LSADS) —Performance requirements, system requirements and performance test procedures▷ISO/AWI TR 7874-1 Intelligent transport systems — Mobility integration multimodal pricing — Part 1: Framework▷ISO/AWI 12768-1 Intelligent transport systems — Automated Valet Driving Systems (AVDS) — Part 1: Part 1: Requirements, System Framework, Communication Interfaces and Test Procedures▷ISO/AWI 12768-2 Intelligent transport systems — Automated Valet Driving Systems (AVDS) — Part 2: Part 2: System framework, security procedures and requirements▷ISO/CD TR 12786 Intelligent transport systems — Big data and artificial intelligence supporting intelligent transport systems — Use cases▷ISO 12813 Electronic fee collection — Compliance check communication for autonomous systems▷ISO/AWI 12855 Electronic fee collection — Information exchange between service provision and toll charging▷ISO/AWI 13140 Electronic fee collection -– Conformity evaluation of on-board and roadside equipment to ISO 13141
-
[특집-기술위원회] TC 199 - 기계류 안전(Safety of machinery)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 △1988년 TC 192~TC 194 △1989년 TC 195 △1990년 TC 197, TC 198 등이 있다.ISO/TC 199 기계류 안전(Safety of machinery)과 관련된 기술위원회는 1991년 결성됐다. 사무국은 독일 표준화기구(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다.위원회는 크리스티안 톰(Mr Dr. rer. nat Christian Thom)가 책임지고 있다. 현재 의장은 오토 괴르네만(Mr Otto Görnemann)이다.ISO 기술 프로그램 관리자는 메르세 페레 에르난데스(Mme Mercè Ferrés Hernández), ISO 편집 관리자는 클라우디아 루에제(Ms Claudia Lueje) 등이다.범위는 ISO/IEC 가이드 51 프레임워크 및 ISO, IEC 기술 위원회와 협력해 용어, 방법론, 보호 장치 및 안전 장치를 통합한 기계 안전에 대한 기본 개념 및 일반 원칙의 표준화다.단, ISO/IEC Guide 51에 정의되어 있고 다른 ISO 또는 IEC 기술 위원회의 작업에서 명시적으로 다루고 있는 제품 안전 표준은 제외한다.현재 ISO/TC 199 사무국의 직접적인 책임 하에 발행된 표준은 45개며 ISO/TC 199 사무국의 직접적인 책임 하에 개발 중인 표준은 9개다. 참여하고 있는 회원은 26개국, 참관 회원은 25개국이다.□ ISO/TC 199 사무국의 직접적인 책임 하에 발행된 표준 45개 중 15개 목록▷ISO Guide 78:2012 Safety of machinery — Rules for drafting and presentation of safety standards▷ISO 11161:2007 Safety of machinery — Integrated manufacturing systems — Basic requirements▷ISO 11161:2007/Amd 1:2010 Safety of machinery — Integrated manufacturing systems — Basic requirements — Amendment 1▷ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction▷ISO 13849-1:2023 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design▷ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation▷ISO 13850:2015 Safety of machinery — Emergency stop function — Principles for design▷ISO 13851:2019 Safety of machinery — Two-hand control devices — Principles for design and selection▷ISO 13854:2017 Safety of machinery — Minimum gaps to avoid crushing of parts of the human body▷ISO 13855:2010 Safety of machinery — Positioning of safeguards with respect to the approach speeds of parts of the human body▷ISO 13856-1:2013 Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors▷ISO 13856-2:2013 Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars▷ISO 13856-3:2013 Safety of machinery — Pressure-sensitive protective devices — Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices▷ISO 13857:2019 Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs▷ISO 14118:2017 Safety of machinery — Prevention of unexpected start-up□ ISO/TC 199 사무국의 직접적인 책임 하에 개발 중인 표준 9개 목록▷ISO/AWI 12100 Safety of machinery — General principles for design — Risk assessment and risk reduction▷ISO/DIS 12895 Safety of machinery — Identification of whole body access and prevention of associated risk(s)▷ISO/AWI 13849-2 Safety of machinery — Safety-related parts of control systems — Part 2: Guidance for the design and validation▷ISO/AWI TR 13849-3 Safety of machinery — Safety-related parts of control systems — Part 3: Markov model-based PFH calculation▷ISO/FDIS 13855 Safety of machinery — Positioning of safeguards with respect to the approach of the human body▷ISO/FDIS 14119 Safety of machinery — Interlocking devices associated with guards — Principles for design and selection▷ISO/AWI 14122-1 Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means of access between two levels▷ISO/AWI 14159 Safety of machinery — Hygiene requirements for the design of machinery▷ISO/CD TR 21260 Safety of machinery — Mechanical safety data for physical contacts between moving machinery or moving parts of machinery and persons
-
[특집-기술위원회] TC 198 - 보건 의료 제품의 멸균(Sterilization of health care products)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 △1988년 TC 192~TC 194 △1989년 TC 195 등이 있다.ISO/TC 198 보건 의료 제품의 멸균(Sterilization of health care products)과 관련된 기술위원회는 TC 197과 마찬가지로 1990년 결성됐다. 사무국은 미국 표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 아만다 베네딕(Ms Amanda Benedict)가 책임지고 있다. 현재 의장은 리차드 밴크로프트(Mr Richard Bancroft)이며 임기는 2025년 말까지다.ISO 기술 프로그램 관리자는 페트리샤 쿡(Mme Patricia Cook), ISO 편집 관리자는 클라우디아 루에제(Ms Claudia Lueje)등이다. 범위는 보건의료 제품의 멸균을 위한 프로세스 및 장비의 표준화다.현재 ISO/TC 198 사무국의 직접적인 책임 하에 발행된 표준은 69개며 ISO/TC 198 사무국의 직접적인 책임 하에 개발 중인 표준은 15개다. 참여하고 있는 회원은 34개국, 참관 회원은 21개국이다.□ ISO/TC 198 사무국의 직접적인 책임 하에 발행된 표준 69개 중 15개 목록▷ISO/TS 5111:2022 Guidance on quality of water for sterilizers, sterilization and washer-disinfectors for health care products▷ISO 11135:2014 Sterilization of health-care products — Ethylene oxide — Requirements for the development, validation and routine control of a sterilization process for medical devices▷ISO 11135:2014/Amd 1:2018 Sterilization of health-care products — Ethylene oxide — Requirements for the development, validation and routine control of a sterilization process for medical devices — Amendment 1: Revision of Annex E, Single batch release▷ISO 11137-1:2006 Sterilization of health care products — Radiation — Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices▷ISO 11137-1:2006/Amd 1:2013 Sterilization of health care products — Radiation — Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices — Amendment 1▷ISO 11137-1:2006/Amd 2:2018 Sterilization of health care products — Radiation — Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices — Amendment 2: Revision to 4.3.4 and 11.2▷ISO 11137-2:2013 Sterilization of health care products — Radiation — Part 2: Establishing the sterilization dose▷ISO 11137-2:2013/Amd 1:2022 Sterilization of health care products — Radiation — Part 2: Establishing the sterilization dose — Amendment 1▷ISO 11137-3:2017 Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control▷ISO/TS 11137-4:2020 Sterilization of health care products — Radiation — Part 4: Guidance on process control▷ISO 11138-1:2017 Sterilization of health care products — Biological indicators — Part 1: General requirements▷ISO 11138-2:2017 Sterilization of health care products — Biological indicators — Part 2: Biological indicators for ethylene oxide sterilization processes▷ISO 11138-3:2017 Sterilization of health care products — Biological indicators — Part 3: Biological indicators for moist heat sterilization processes▷ISO 11138-4:2017 Sterilization of health care products — Biological indicators — Part 4: Biological indicators for dry heat sterilization processes▷ISO 11138-5:2017 Sterilization of health care products — Biological indicators — Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes□ ISO/TC 198 사무국의 직접적인 책임 하에 개발 중인 표준 15개 목록▷ISO/DIS 11135.2 Sterilization of health care products — Ethylene oxide — Requirements for the development, validation and routine control of a sterilization process for medical devices▷ISO/FDIS 11137-1 Sterilization of health care products — Radiation — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices▷ISO/CD 11140-3 Sterilization of health care products — Chemical indicators — Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test▷ISO/CD 11140-4 Sterilization of health care products — Chemical indicators — Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration▷ISO/CD 11140-5 Sterilization of health care products — Chemical indicators — Part 5: Class 2 indicators for Bowie and Dick-type air removal tests▷ISO/AWI 11607-3 Packaging for terminally sterilized medical devices — Part 3: Requirements for process development for forming, sealing and assembly▷ISO/AWI 11737-1 Sterilization of health care products — Microbiological methods — Part 1: Determination of a population of microorganisms on products▷ISO/FDIS 15883-1 Washer-disinfectors — Part 1: General requirements, terms and definitions and tests▷ISO/DIS 15883-2 Washer-disinfectors — Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for critical and semi-critical medical devices▷ISO/DIS 15883-3 Washer-disinfectors — Part 3: Requirements and tests for washer-disinfectors employing thermal disinfection for human waste containers▷ISO/CD 15883-6 Washer-disinfectors — Part 6: Requirements and tests for washer-disinfectors employing thermal disinfection for noncritical medical devices and health care equipment▷ISO/DIS 15883-7 Washer-disinfectors — Part 7: Requirements and tests for washer-disinfectors employing chemical disinfection for non-critical thermolabile medical devices and health care equipment▷ISO/AWI TS 17664-3 Processing of health care products — Information to be provided by the medical device manufacturer for the processing of medical devices — Part 3: Guidance on the designation of a reusable medical device to a quantitative cleaning classification▷ISO 17665 Sterilization of health care products — Moist heat — Requirements for the development, validation and routine control of a sterilization process for medical devices▷ISO/AWI 19253 Sterilization of health care products — Application of ISO/TS 22421 to the requirements for sterilizers used for the terminal sterilization of health care products containing aqueous liquid in sealed containers
-
[특집-ISO/IEC JTC 1/SC 17 활동] 30. Result of voting on SR Ballot for ISO/IEC 18013-12023년 12월04일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Result of voting on SR Ballot for ISO/IEC 18013-1(N 7340)' 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서인 'Result of voting on SR Ballot for ISO/IEC 18013-1'는 ISO/IEC 18013-1:2018 (Ed 2)(restricted access)와 관련한 투표결과를 포함하고 있다. ISO/IEC 18013-1:2018 (Ed 2)(restricted access)는 Information technology — Personal identification — ISO-compliant driving licence — Part 1: Physical characteristics and basic data set에 관한 것이다. N 7340 문서는 N 7338, N 7339 문서와 마찬가지로 2023년 7월15일~12월2일 동안 투표가 진행됐다. 기간 내 각 회원국들은 안건에 대해 의사를 표명했다.투표 항목은 △Confirm △Revise/Amend △Withdraw △Abstain lack of consensus △Abstain lack of national expert input △Stabilize △Q.2 △Q.3 △Q.4 △Q.5 △Q.6 등 총 11개다. 구체적인 질문 내용은 다음과 같다.▷ Q.1 Recommended action▷ Q.2 Has this International Standard been adopted or is it intended to be adopted in the future as a national standard or other publication?▷ Q.3 Is the national publication identical to the International Standard or was it modified?▷ Q.4 If this International Standard has not been nationally adopted, is it applied or used in your country without national adoption or are products/processes/services used in your country based on this standard?▷ Q.5 Is this International Standard, or its national adoption, referenced in regulations in your country?▷ Q.6 If the committee decides to revise or amend, do you propose an expert and/or project leader for the development of that project?참고로 11개 항목 중 투표 결과를 살펴보면 △Confirm 14개국 △Revise/Amend 1개국 △Abstain lack of national expert input 20개국 등으로 나타났다. - 이하 생략 -
-
[특집-ISO/IEC JTC 1/SC 17 활동] 29. Result of voting on SR Ballot for ISO/IEC 15963-1 (M 7339)2023년 12월04일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Result of voting on SR Ballot for ISO/IEC 15963-1(N 7339)' 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서인 'Result of voting on SR Ballot for ISO/IEC 15963-1'는 ISO/IEC 15693-1:2018 (Ed 3) (restricted access)와 관련한 투표 및 투표 결과에 대한 내용이다. ISO/IEC 15693-1:2018 (Ed 3) (restricted access)의 주제는 Cards and security devices for personal identification — Contactless vicinity objects — Part 1: Physical characteristics이다.N 7339 문서는 N 7338 문서와 마찬가지로 2023년 7월15일~12월2일 동안 투표가 진행됐다. 기간 내 각 회원국들은 투표를 통해 의견을 표명했다.투표 항목은 △Confirm △Revise/Amend △Withdraw △Abstain lack of consensus △Abstain lack of national expert input △Stabilize △Q.2 △Q.3 △Q.4 △Q.5 △Q.6 등 총 11개다. 구체적인 질문 내용은 다음과 같다.▷ Q.1 Recommended action▷ Q.2 Has this International Standard been adopted or is it intended to be adopted in the future as a national standard or other publication?▷ Q.3 Is the national publication identical to the International Standard or was it modified?▷ Q.4 If this International Standard has not been nationally adopted, is it applied or used in your country without national adoption or are products/processes/services used in your country based on this standard?▷ Q.5 Is this International Standard, or its national adoption, referenced in regulations in your country?▷ Q.6 If the committee decides to revise or amend, do you propose an expert and/or project leader for the development of that project? - 이하 생략 -
-
[특집-기술위원회] TC 197 - 수소 기술(Hydrogen technologies)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 △1988년 TC 192~TC 194 △1989년 TC 195 등이 있다.ISO/TC 197 수소 기술(Hydrogen technologies)과 관련된 기술위원회는 1990년 결성됐다. 사무국은 캐나다 표준위원(Standards Council of Canada, SCC)에서 맡고 있다.위원회는 시아시아 모렐(Mr Siasia Morel)가 책임지고 있다. 현재 의장은 이케다 테츠후미(Mr Tetsufumi IKEDA)이며 임기는 2024년 말까지다. ISO 기술 프로그램 관리자는 키르시 실란데르-반 후넨(Mrs Kirsi Silander-van Hunen), ISO 편집 관리자는 아룬 ABY 파라에카틸(Mr Arun ABY Paraecattil)등이다. 범위는 수소 생산, 저장, 운송, 측정 및 사용을 위한 시스템 및 장치 분야의 표준화다.현재 ISO/TC 197 사무국과 관련해 발행된 표준은 19개며 ISO/TC 197 사무국의 직접적인 책임 하에 발행된 표준은 18개다.ISO/TC 197 사무국과 관련해 개발 중인 표준은 22개며 ISO/TC 197 사무국의 직접적인 책임 하에 개발 중인 표준은 21개다. 참여하고 있는 회원은 35개국, 참관 회원은 18개국이다.□ ISO/TC 197 사무국의 직접적인 책임 하에 발행된 표준 18개 중 15개 목록▷ISO 13984:1999 Liquid hydrogen — Land vehicle fuelling system interface▷ISO 13985:2006 Liquid hydrogen — Land vehicle fuel tanks▷ISO 14687:2019 Hydrogen fuel quality — Product specification▷ISO/TR 15916:2015 Basic considerations for the safety of hydrogen systems▷ISO 16110-1:2007 Hydrogen generators using fuel processing technologies — Part 1: Safety▷ISO 16110-2:2010 Hydrogen generators using fuel processing technologies — Part 2: Test methods for performance▷ISO 16111:2018 Transportable gas storage devices — Hydrogen absorbed in reversible metal hydride▷ISO 17268:2020 Gaseous hydrogen land vehicle refuelling connection devices▷ISO 19880-1:2020 Gaseous hydrogen — Fuelling stations — Part 1: General requirements▷ISO 19880-3:2018 Gaseous hydrogen — Fuelling stations — Part 3: Valves▷ISO 19880-5:2019 Gaseous hydrogen — Fuelling stations — Part 5: Dispenser hoses and hose assemblies▷ISO 19880-8:2019 Gaseous hydrogen — Fuelling stations — Part 8: Fuel quality control▷ISO 19880-8:2019/Amd 1:2021 Gaseous hydrogen — Fuelling stations — Part 8: Fuel quality control — Amendment 1: Alignment with Grade D of ISO 14687▷ISO 19881:2018 Gaseous hydrogen — Land vehicle fuel containers▷ISO 19882:2018 Gaseous hydrogen — Thermally activated pressure relief devices for compressed hydrogen vehicle fuel containers□ ISO/TC 197 사무국의 직접적인 책임 하에 개발 중인 표준 21개 중 15개 목록▷ISO/WD 13984 Liquid Hydrogen Land Vehicle Fueling Protocol▷ISO/AWI 13985 Liquid hydrogen — Land vehicle fuel tanks▷ISO/DIS 14687 Hydrogen fuel quality — Product specification▷ISO/DIS 17268-1 Gaseous hydrogen land vehicle refuelling connection devices — Part 1: Flow capacities up to and including 120 g/s▷ISO/AWI 17268-2 Gaseous hydrogen land vehicle refuelling connection devices — Part 2: Part 2: Flow capacities greater than 120 g/s▷ISO/AWI 17268-3 Gaseous hydrogen land vehicle refuelling connection devices — Part 3: Cryo-compressed hydrogen gas▷ISO/DIS 19880-2 Gaseous hydrogen — Fuelling stations — Part 2: Dispensers and dispensing systems▷ISO/CD 19880-5 Gaseous hydrogen — Fuelling stations — Part 5: Dispenser hoses and hose assemblies▷ISO/DIS 19880-7 Gaseous hydrogen — Fuelling stations — Part 7: Rubber O-rings▷ISO/DIS 19880-8 Gaseous hydrogen — Fuelling stations — Part 8: Fuel quality control▷ISO/DIS 19880-9 Gaseous hydrogen — Fuelling stations — Part 9: Sampling for fuel quality analysis▷ISO/AWI TS 19880-10 Gaseous hydrogen — Fuelling stations — Part 10: Mobile fueling stations▷ISO/DIS 19881 Gaseous hydrogen — Land vehicle fuel containers▷ISO/DIS 19882 Gaseous hydrogen — Thermally activated pressure relief devices for compressed hydrogen vehicle fuel containers▷ISO/AWI 19884-1 Gaseous Hydrogen - Pressure vessels for stationary storage — Part 1: Part 1: general requirements□ ISO/TC 197 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 197/SC 1 Hydrogen at scale and horizontal energy systems ; 발행된 표준 1개, 개발 중인 표준 1개
-
[특집-ISO/IEC JTC 1/SC 17 활동] 28. Result of voting on SR ballot for ISO/IEC 10373-32023년 12월04일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Result of voting on SR ballot for ISO/IEC 10373-3' 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동기술위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서인 'Result of voting on SR ballot for ISO/IEC 10373-3'는 Identification cards — Test methods — Part 3: Integrated circuit cards with contacts and related interface devices에 관한 투표 및 결과에 대한 내용을 포함하고 있다.2023년 7월15일~12월2일 동안 투표 절차가 진행됐다. 다음과 같은 항목에 대해 회원국들로부터 의견을 물었다. 투표 항목은 △Confirm △Revise/Amend △Withdraw △Abstain lack of consensus △Abstain lack of national expert input △Stabilize △Q.2 △Q.3 △Q.4 △Q.5 △Q.6 등 총 11개다. 구체적인 질문 내용은 다음과 같다.▷ Q.1 Recommended action▷ Q.2 Has this International Standard been adopted or is it intended to be adopted in the future as a national standard or other publication?▷ Q.3 Is the national publication identical to the International Standard or was it modified?▷ Q.4 If this International Standard has not been nationally adopted, is it applied or used in your country without national adoption or are products/processes/services used in your country based on this standard?▷ Q.5 Is this International Standard, or its national adoption, referenced in regulations in your country?▷ Q.6 If the committee decides to revise or amend, do you propose an expert and/or project leader for the development of that project? - 이하 생략 -