검색결과
-
[특집] ISO/TC 85 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회는 1947년 구성된 TC1~TC67, 1948년 구성된 TC 69, 1949년에 구성된 TC 70~72, 1972년 구성된 TC68, 1950년 구성된 TC74, 1951년 구성된 TC76, 1952년 구성된 TC77, 1953년에 구성된 TC79, TC81, 1955년 구성된 TC82, TC83 등이다.ISO/TC 85 원자력, 원자력 기술 및 방사선 보호(Nuclear energy, nuclear technologies, and radiological protection)와 관련된 기술위원회는 TC84와 마찬가지로 1956년 결성됐다.사무국은 프랑스표준화협회(Association Française de Normalisation, AFNOR)에서 맡고 있다. 위원회는 나탈리 게슬린(Mme Nathalie Geslin)가 책임진다. 현재 의장은 올리비에 마르샹(M Olivier Marchand)으로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 키르시 실란더-반 후넨(Mrs Kirsi Silander-van Hunen), ISO 편집 관리자는 빈센조 바추키(M Vincenzo Bazzucchi) 등으로 조사됐다.범위는 원자력 에너지, 원자력 기술의 평화적 적용 분야 및 모든 전리 방사선원으로부터 개인과 환경을 보호하는 분야의 표준화다.현재 ISO/TC 85 사무국과 관련해 발행된 표준은 256개며 ISO/TC 85의 직접적인 책임 하에 발행된 표준은 35개다. ISO/TC 85 사무국과 관련해 개발 중인 표준은 53개며 직접적인 책임하에 개발중인 표준은 2개다. 참여하고 있는 회원은 26명, 참관 회원은 21명이다.□ ISO/TC 84 사무국의 직접 책임 하에 발행된 표준 35개 중 15개 목록▲ISO 361:1975 Basic ionizing radiation symbol▲ISO/TR 4450:2020 Quality management systems — Guidance for the application of ISO 19443:2018▲ISO 12749-1:2020 Nuclear energy — Vocabulary — Part 1: General terminology▲ISO 12749-2:2022 Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 2: Radiological protection▲ISO 12749-3:2015 Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 3: Nuclear fuel cycle▲ISO 12749-4:2015 Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 4: Dosimetry for radiation processing▲ISO 12749-5:2018 Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 5: Nuclear reactors▲ISO 12749-6:2020 Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 6: Nuclear medicine▲ISO 19443:2018 Quality management systems — Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS)▲ISO/TS 23406:2020 Nuclear sector — Requirements for bodies providing audit and certification of quality management systems for organizations supplying products and services important to nuclear safety (ITNS)▲ISO/ASTM 51026:2015 Practice for using the Fricke dosimetry system▲ISO/ASTM 51205:2017 Practice for use of a ceric-cerous sulfate dosimetry system▲ISO/ASTM 51261:2013 Practice for calibration of routine dosimetry systems for radiation processing▲ISO/ASTM 51275:2013 Practice for use of a radiochromic film dosimetry system▲ISO/ASTM 51276:2019 Practice for use of a polymethylmethacrylate dosimetry system□ ISO/TC 84 사무국의 직접 책임 하에 개발 중인 표준 2개 목록▲ISO/DIS 12749-3 Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 3: Nuclear installations, processes and technologies▲ISO/CD TS 23406 Nuclear sector — Requirements for bodies providing audit and certification of quality management systems for organizations supplying products and services important to nuclear safety (ITNS)□ ISO/TC 85 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 85/SC 2 Radiological protection ; 발행된 표준 121개, 개발 중인 표준 28개▲ISO/TC 85/SC 5 Nuclear installations, processes and technologies ; 발행된 표준 84개, 개발 중인 표준 15개▲ISO/TC 85/SC 6 Reactor technology ; 발행된 표준 18개, 개발 중인 표준 8개
-
[특집] ISO/TC 84 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회는 1947년 구성된 TC1~TC67, 1948년 구성된 TC 69, 1949년에 구성된 TC 70~72, 1972년 구성된 TC68, 1950년 구성된 TC74, 1951년 구성된 TC76, 1952년 구성된 TC77, 1953년에 구성된 TC79, TC81, 1955년 구성된 TC82, TC83 등이다.ISO/TC 84 의약품 및 카테터 투여용 장치(Devices for administration of medicinal products and catheters)와 관련된 기술위원회는 1956년 결성됐다.사무국은 덴마크표준재단(Danish Standards Foundation, DS)에서 맡고 있다. 위원회는 비비 넬레모스(Bibi Nellemose)가 책임진다. 현재 의장은 로버트 R. 네스빗(Mr Robert R. Nesbitt)으로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 이사벨 베가(Ms Isabelle Vega), ISO 편집 관리자는 크리스텔 간손레(Ms Christelle Gansonre) 등으로 조사됐다. 범위는 의약품 투여를 위한 계량 장치 및 공급품의 성능 표준화, 주사기, 바늘, 카테터 등의 표준화다.□ 다음 사항은 표준화에서 제외한다.▷ 진단용 비카테터 장치▷ ISO/TC 121에 의해 적용되는 폐 인공 호흡기 및 산소 치료 장치를 포함한 마취 및 호흡 장비▷ ISO/TC 106에 의해 적용되는 치과용 카트리지 시스템▷ ISO/TC 76에서 다루는 미리 채워진 주사기를 포함한 구성 요소 및 장치에 대한 특정 요구사항현재 ISO/TC 84 사무국과 관련해 발행된 표준은 36개며 ISO/TC 83 사무국과 관련해 개발 중인 표준은 8개다. 참여하고 있는 회원은 30명, 참관 회원은 29명이다.□ ISO/TC 84 사무국의 직접 책임 하에 발행된 표준 36개 중 15개 목록▲ISO 6009:2016 Hypodermic needles for single use — Colour coding for identification▲ISO 7864:2016 Sterile hypodermic needles for single use — Requirements and test methods▲ISO 7886-1:2017 Sterile hypodermic syringes for single use — Part 1: Syringes for manual use▲ISO 7886-2:2020 Sterile hypodermic syringes for single use — Part 2: Syringes for use with power-driven syringe pumps▲ISO 7886-3:2020 Sterile hypodermic syringes for single use — Part 3: Auto-disabled syringes for fixed-dose immunization▲ISO 7886-4:2018 Sterile hypodermic syringes for single use — Part 4: Syringes with re-use prevention feature▲ISO 8537:2016 Sterile single-use syringes, with or without needle, for insulin▲ISO 9626:2016 Stainless steel needle tubing for the manufacture of medical devices — Requirements and test methods▲ISO 10555-1:2013 Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements▲ISO 10555-1:2013/Amd 1:2017 Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements — Amendment 1▲ISO 10555-3:2013 Intravascular catheters — Sterile and single-use catheters — Part 3: Central venous catheters▲ISO 10555-4:2013 Intravascular catheters — Sterile and single-use catheters — Part 4: Balloon dilatation catheters▲ISO 10555-5:2013 Intravascular catheters — Sterile and single-use catheters — Part 5: Over-needle peripheral catheters▲ISO 10555-6:2015 Intravascular catheters — Sterile and single-use catheters — Part 6: Subcutaneous implanted ports▲ISO 10555-6:2015/Amd 1:2019 Intravascular catheters — Sterile and single-use catheters — Part 6: Subcutaneous implanted ports — Amendment 1□ ISO/TC 84 사무국의 직접 책임 하에 개발 중인 표준 8개 목록▲ISO/AWI TS 4452 Specification and demonstration of system reliability of single-use drug delivery systems▲ISO/FDIS 10555-1 Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements▲ISO/FDIS 10555-4 Intravascular catheters — Sterile and single-use catheters — Part 4: Balloon dilatation catheters▲ISO/DIS 10555-7 Intravascular catheters — Sterile and single-use catheters — Part 7: Peripherally inserted central catheters▲ISO/DIS 10555-8 Intravascular catheters — Sterile and single-use catheters — Part 8: Catheters for extracorporeal blood treatment▲ISO/AWI 18138 Procedures and devices for the removal, containment and disposal of scalpel blades from scalpel handles▲ISO/DIS 23217.2 Injection systems for self-administration by paediatric patients — Guidelines for design▲ISO/CD 23908 Sharps injury protection — Requirements and test methods — Sharps protection features for single-use needles, introducers for catheters and needles used for blood testing, monitoring, sampling and medical substance administration
-
[특집] ISO/TC 83 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회는 1947년 구성된 TC1~TC67, 1948년 구성된 TC 69, 1949년에 구성된 TC 70~72, 1972년 구성된 TC68, 1950년 구성된 TC74, 1951년 구성된 TC76, 1952년 구성된 TC77, 1953년에 구성된 TC79, TC81 등이다.ISO/TC 83 스포츠 및 기타 레크레이션 시설·장비(Sports and other recreational facilities and equipment)와 관련된 기술위원회는 TC82와 마찬가지로 1955년 결성됐다.사무국은 독일표준협회(Deutsches Institut für Normung, DIN)에서 맡고 있다. 위원회는 레티시아 데 안다 곤살레스(Mrs Dipl.-Kffr Leticia de Anda González)이 책임진다. 현재 의장은 마이클 하우스(Mr Michael Haus)로 임기는 2028년까지다.ISO 기술 프로그램 관리자는 샐리 스윙우드(Ms Sally Swingewood), ISO 편집 관리자는 이본 첸(Mrs Yvonne Chen) 등으로 조사됐다.범위는 전통적인 것을 포함한 물리적, e-스포츠를 포함한 가상 스포츠를 위한 관련 테스트 장비를 포함하는 테스트뿐만 아니라 용어, 치수, 허용 오차, 기능, 운영, 유지 관리, 훈련, 성능 및 안전 요구 사항의 표준화다.다음에 대한 표준의 개발 및 유지 관리는 포함된다. △스포츠 및 레크리에이션 시설 △레크리에이션 목적을 위한 장비를 포함한 장비로 로프 코스, 놀이터, 공기주입식 기구, 워터 슬라이드, 캠핑 텐트, 레크리에이션 트레일, 수상 레저 용품, 침낭, 아이스하키, 스노우 스포츠, 스포츠 장비 및 시설 등이 해당된다. 다만 ISO/TC 254 범위 내에서 국제표준이 적용되는 놀이기구 및 놀이 장치는 제외된다.현재 ISO/TC 83 사무국과 관련해 발행된 표준은 97개며 이 중 ISO/TC 83 사무국의 직접적인 책임 하에 개발된 표준은 35개다.ISO/TC 83 사무국과 관련해 개발 중인 표준은 21개며 이중 직접적인 책임 하에 개발 중인 표준은 14개다. 참여하고 있는 회원은 35명, 참관 회원은 18명이다.□ ISO/TC 83 사무국의 직접 책임 하에 발행된 표준 35개 중 15개 목록▲ISO 4980:2023 Benefit-risk assessment for sports and recreational facilities, activities and equipment▲ISO 5912:2020 Camping tents — Requirements and test methods▲ISO 7152:2023 Camping tents and caravan awnings — Vocabulary▲ISO 8936:2017 Awnings for leisure accommodation vehicles — Requirements and test methods▲ISO 11416:1995 Tennis rackets — Racket components and physical parameters▲ISO 19202-1:2017 Summer toboggan runs — Part 1: Safety requirements and test methods▲ISO 19202-2:2017 Summer toboggan runs — Part 2: Safety requirements for operation▲ISO/TR 20183:2015 Sports and other recreational facilities and equipment — Injury and safety definitions and thresholds — Guidelines for their inclusion in standards▲ISO 20187-1:2022 Inflatable play equipment — Part 1: Safety requirements and test methods▲ISO 20187-2:2022 Inflatable play equipment — Part 2: Additional safety requirements for inflatable bouncing pillows intended for permanent installation▲ISO 20187-3:2022 Inflatable play equipment — Part 3: Additional safety requirements and test methods for snappies▲ISO 20380:2017 Public swimming pools — Computer vision systems for the detection of drowning accidents in swimming pools — Safety requirements and test methods▲ISO 20957-1:2013 Stationary training equipment — Part 1: General safety requirements and test methods▲ISO 20957-2:2020 Stationary training equipment — Part 2: Strength training equipment, additional specific safety requirements and test methods▲ISO 20957-4:2016 Stationary training equipment — Part 4: Strength training benches, additional specific safety requirements and test methods□ ISO/TC 83 사무국의 직접 책임 하에 개발중인 표준 14개 목록▲ISO/AWI 20288 Public Swimming Pools — Systems recognizing involuntarily submersion of humans in managed aquatic facilities▲ISO/CD 20957-1 Stationary training equipment — Part 1: General safety requirements and test methods▲ISO/DIS 20957-2 Stationary training equipment — Part 2: Strength training equipment — Additional specific safety requirements and test methods▲ISO/DIS 20957-7 Stationary training equipment — Part 7: Rowing equipment — Additional specific safety requirements and test methods▲ISO 23537-2 Requirements for sleeping bags — Part 2: Fabric and material properties▲ISO/DTS 24665 Playground and recreational areas — Framework for the competence of playground inspectors and playground maintenance technicians▲ISO/TR 24666 Sports and recreational facilities — Probes for entrapment/entanglement on playground equipment — Collection of data▲ISO/DIS 25649-1 Floating leisure articles for use on and in the water — Part 1: Classification, materials, general requirements and test methods▲ISO/DIS 25649-2 Floating leisure articles for use on and in the water — Part 2: Consumer information▲ISO/DIS 25649-3 Floating leisure articles for use on and in the water — Part 3: Additional specific safety requirements and test methods for Class A devices▲ISO/DIS 25649-4 Floating leisure articles for use on and in the water — Part 4: Additional specific safety requirements and test methods for Class B devices▲ISO/DIS 25649-5 Floating leisure articles for use on and in the water — Part 5: Additional specific safety requirements and test methods for Class C devices▲ISO/DIS 25649-6 Floating leisure articles for use on and in the water — Part 6: Additional specific safety requirements and test methods for Class D devices▲ISO/DIS 25649-7 Floating leisure articles for use on and in the water — Part 7: Additional specific safety requirements and test methods for Class E devices□ ISO/TC 83 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 83/SC 4 Snowsports equipment ; 발행된 표준 47개, 개발 중인 표준 2개▲ISO/TC 83/SC 5 Ice hockey equipment and facilities ; 발행된 표준 5개, 개발 중인 표준 5개▲ISO/TC 83/SC 6 Martial arts ; 발행된 표준 10개, 개발 중인 표준 0개
-
[특집] ISO/TC 82 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회는 1947년 구성된 TC1~TC67, 1948년 구성된 TC 69, 1949년에 구성된 TC 70~72, 1972년 구성된 TC68, 1950년 구성된 TC74, 1951년 구성된 TC76, 1952년 구성된 TC77, 1953년에 구성된 TC79, TC81 등이다.ISO/TC 82 광업(Mining)과 관련된 기술위원회는1955년 결성됐다. 사무국은 독일표준협회(Deutsches Institut für Normung, DIN)에서 맡고 있다. 위원회는 요른 레만(Mr Jörn Lehmann)이 책임진다. 현재 의장은게오르그 Chr. 필러((FH) Georg Chr. Piller)로 임기는 2027년까지다.ISO 기술 프로그램 관리자는 메르세 페레스 에르난데스(Mme Mercè Ferrés Hernández), ISO 편집 관리자는 빈센조 바추키(M Vincenzo Bazzucchi) 등으로 조사됐다.범위는 컨베어, 고벽 채굴기, 암석 채굴장비, 연속 표층 채굴기 등 노천광산에서 사용되는 특수 채굴 기계 및 장비와 관련한 표준화다.또한 도로 헤더, 연속 채굴기, 암석 채굴장비, 굴착기, 고벽 체굴기, LHD, 광업 오거 보링기계, RMDS(급속 광산 개발 시스템) 등 고체 광물질의 추출을 위한 모든 지하 채굴 기계 및 장비의 표준화도 추진하고 있다.광산 측량에 사용되는 계획 및 도면을 제시할 때 권장되는 관행, 광물 매장량 계산 방법, 광산 매립 관리, 광산 산업을 위한 구조물 설계, 특수 피난처 및 구조실, 샤프트 보링 머신 등도 표준화 대상이다. 단 다음 항목은 표준화 범위에서 제외된다.△파일링, 다이어프램 월링, 어스 보링, 제트, 그라우팅, 토양 및 암석 혼합물용 드릴 장비 등의 기초 기계(ISO/TC 195)△스크리닝, 파쇄 등 골재 처리 기계△폭발성 대기에서 사용되는 장비 및 보호 시스템(IEC/TC 31)△휴대용 착암기(ISO/TC 118)△토목 기계(ISO/TC 127)△지질 공학(ISO/TC 182)△터널 굴착기(TBM) 및 관련 기계 및 장비(ISO/TC 195) 등이다.현재 ISO/TC 82 사무국과 관련해 발행된 표준은 61개며 이 중 ISO/TC 82 사무국의 직접적인 책임 하에 개발된 표준은 58개다.ISO/TC 82 사무국과 관련해 개발중인 표준은 13개며 이중 직접적인 책임 하에 개발 중인 표준은 8개다. 참여하고 있는 회원은 25명, 참관 회원은 24명이다.□ ISO/TC 82 사무국의 직접 책임 하에 발행된 표준 58개 중 15개 목록▲ISO 610:1990 High-tensile steel chains (round link) for chain conveyors and coal ploughs▲ISO 710-1:1974 Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 1: General rules of representation▲ISO 710-2:1974 Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 2: Representation of sedimentary rocks▲ISO 710-3:1974 Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 3: Representation of magmatic rocks▲ISO 710-4:1982 Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 4: Representation of metamorphic rocks▲ISO 710-5:1989 Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 5: Representation of minerals▲ISO 710-6:1984 Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 6: Representation of contact rocks and rocks which have undergone metasomatic, pneumatolytic or hydrothermal transformation or transformation by weathering▲ISO 710-7:1984 Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 7: Tectonic symbols▲ISO 721:1991 Rock drilling equipment — Integral stems▲ISO 722:1991 Rock drilling equipment — Hollow drill steels in bar form, hexagonal and round▲ISO 723:1991 Rock drilling equipment — Forged collared shanks and corresponding chuck bushings for hollow hexagonal drill steels▲ISO 1082:1990 Mining — Shackle type connector units for chain conveyors▲ISO 1717:1974 Rock drilling — Rotary drill-rods and rotary drill-bits for dry drilling — Connecting dimensions▲ISO 1718:1991 Rock drilling equipment — Drill rods with tapered connection for percussive drilling▲ISO 1721:1974 Rock drilling — Extension drill-steel equipment for percussive long-hole drilling — Reverse-buttress-threaded equipments 1 1/16 and 1 1/4 in (27 and 32 mm)□ ISO/TC 82 사무국의 직접 책임 하에 개발중인 표준 8개 목록▲ISO/AWI 12848 Mine hoists and mine winders-Safety requirements▲ISO/AWI 18758 Mining, earth-moving and construction machinery — Rock drill rigs and rock reinforcement rigs — Safety requirements▲ISO/AWI TS 20268 Inspection and Maintenance of Mine Shaft and Associated Structures▲ISO/CD 22932-6 Mining — Vocabulary — Part 6: Mine hosting equipment▲ISO/CD 22932-7 Mining — Vocabulary — Part 7: Ventilation▲ISO/CD 22932-8 Mining — Vocabulary — Part 8: Extraction▲ISO/CD 22932-9 Mining — Vocabulary — Part 9: Drainage▲ISO/AWI 22932-10 Mining — Vocabulary — Part 10: Haulage□ ISO/TC 82 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 82/SC 7 Mine closure and reclamation management ; 발행된 표준 3개, 개발 중인 표준 3개▲ISO/TC 82/SC 8 Advanced automated mining systems ; 발행된 표준 0개, 개발 중인 표준 2개
-
[특집] ISO/TC 79 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 79 경금속 및 합금(Light metals and their alloys)과 관련된 기술위원회는 1953년에 결성됐다.이미 다룬 기술위원회는 1947년 구성된 TC1~TC67, 1948년 구성된 TC 69, 1949년에 구성된 TC 70~72, 1972년 구성된 TC68, 1950년 구성된 TC74, 1951년 구성된 TC76, 1952년에 구성된 TC77 등이다.사무국은 프랑스준화기구(Association française de normalisation, AFNOR)에서 맡고 있다. 위원회는 발렌틴 코틴(M Valentin Cottin)가 책임진다. 현재 의장은 이본 밀레(M Yvon Millet)로 임기는 2026년까지다.ISO 기술 프로그램 관리자는 안나 (Ms Monja Korter), ISO 편집 관리자는 앤 기엣(Ms Anne Guiet) 등으로 조사됐다. 범위는 알루미늄, 마그네슘, 티타늄, 이들의 합금(알루미늄, 마그네슘 또는 티타늄이 주요 요소인 합금 등)의 표준화다.또한 금속 알루미늄 및 중간 알루미늄 화합물을 얻기 위해 또는 다른 산업에서 사용되는 알루미늄 광석 및 광물 등 알루미늄 광석의 표준화도 포함된다.현재 ISO/TC 79 사무국의 직접적인 책임 하에 발행된 표준은 33개다. ISO/TC 79 사무국의 공개된 표준은 111개, 개발중인 표준은 10개다. 참여하고 있는 회원은 19명, 참관 회원은 24명이다.□ ISO/TC 79 사무국의 직접 책임 하에 발행된 표준 15개 목록▲ISO 791:1973 Magnesium alloys — Determination of aluminium — 8-hydroxyquinoline gravimetric method▲ISO 792:1973 Magnesium and magnesium alloys — Determination of iron — Orthophenanthroline photometric method▲ISO 793:1973 Aluminium and aluminium alloys — Determination of iron — Orthophenanthroline photometric method▲ISO 794:1976 Magnesium and magnesium alloys — Determination of copper content — Oxalyldihydrazide photometric method▲ISO 795:1976 Aluminium and aluminium alloys — Determination of copper content — Oxalyldihydrazide photometric method▲ISO 796:1973 Aluminium alloys — Determination of copper — Electrolytic method▲ISO 797:1973 Aluminium and aluminium alloys — Determination of silicon — Gravimetric method▲ISO 808:1973 Aluminium and aluminium alloys — Determination of silicon — Spectrophotometric method with the reduced silicomolybdic complex▲ISO 809:1973 Magnesium and magnesium alloys — Determination of manganese — Periodate photometric method (Manganese content between 0,01 and 0,8 %)▲ISO 810:1973 Magnesium and magnesium alloys — Determination of manganese — Periodate photometric method (Manganese content less than 0,01 %)▲ISO 886:1973 Aluminium and aluminium alloys — Determination of manganese — Photometric method (Manganese content between 0,005 and 1,5 %)▲ISO 1118:1978 Aluminium and aluminium alloys — Determination of titanium — Spectrophotometric chromotropic acid method▲ISO 1178:1976 Magnesium alloys — Determination of soluble zirconium — Alizarin sulphonate photometric method▲ISO 1783:1973 Magnesium alloys — Determination of zinc — Volumetric method▲ISO 1784:1976 Aluminium alloys — Determination of zinc — EDTA titrimetric method□ ISO/TC 79 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 79/SC 2 Organic and anodic oxidation coatings on aluminium ; 발행된 표준 27개, 개발 중인 표준 0개▲ISO/TC 79/SC 4 Unalloyed (refined) aluminium ingots ; 발행된 표준 1개, 개발 중인 표준 1개▲ISO/TC 79/SC 5 Magnesium and alloys of cast or wrought magnesium ; 발행된 표준 11개, 개발 중인 표준 4개▲ISO/TC 79/SC 6 Wrought aluminium and aluminium alloys ; 발행된 표준 20개, 개발 중인 표준 1개▲ISO/TC 79/SC 7 Aluminium and cast aluminium alloys ; 발행된 표준 4개, 개발 중인 표준 0개▲ISO/TC 79/SC 9 Symbolization ; 발행된 표준 1개, 개발 중인 표준 1개▲ISO/TC 79/SC 11 Titanium ; 발행된 표준 13개, 개발 중인 표준 3개▲ISO/TC 79/SC 12 Aluminium ores ; 발행된 표준 1개, 개발 중인 표준 0개
-
[캐나다] 표준위원회(CSA), 배터리관리시스템(BMSs) 안전에 적용 가능한 국가표준 발행캐나다 표준위원회(Standards Council of Canada, CSA)에 따르면 배터리관리시스템(battery management systems, BMSs)의 안전을 위해 적용가능한 새로운 국가표준을 발행했다.새로 발행된 표준의 정식 명칭은 'CSA/ANSI C22.2 No 340 배터리 관리 시스템(Battery Management Systems, BMSs)'이다.이 표준은 열 폭주(thermal runaway) 및 기타 잠재적 위험 조건을 방지하기 위한 배터리 팩의 전기 및 온도 매개변수를 모니터링하고 제어 및 조절하도록 설계된 하드웨어와 소프트웨어로 구성된 BMSs에 적용된다.특정 응용프로그램은 에너지 저장시스템 및 무정전 전원 공급장치와 같은 고정식 응용 프로그램, 전기자동차 및 경전철과 같은 전력 이동성 응용 프로그램에 설치된 표준 BMSs의 범위 내에 포함된다.표준은 최종 제품이 이미 BMSs에 대한 요구사항을 포함한 기준에 의해 다뤄지는 휴대용 응용프로그램에 사용되는 BMSs에는 적용되지 않는다.CSA/ANSI C22.2 No 340의 사양은 Canadian Electric Code, Part II와 미국의 NFPA 70의 요구사항과 일치하고 있다. BMSs표준은 미국국립표준협회(American National Standards Institute, ANSI)에 의해 미국 국가표준으로 승인됐다.
-
[특집] ISO/TC 76 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 76 의료 및 제약 사용을 위한 수혈, 주입, 주사, 혈액 가공 장비(Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use)와 관련된 기술위원회는 1951년 결성됐다.이미 다룬 기술위원회는 1947년 구성된 TC1~TC67, 1948년 구성된 TC 69, 1949년에 구성된 TC 70~72, 1972년 구성된 TC68, 1950년 구성된 TC74 등이다.사무국은 독일표준화기구(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다. 위원회는 마가렛 보레쉬(Mrs Dipl.-Ing Margarethe Boresch)가 책임진다. 현재 의장은 마크 폰 파울로프스키(Mr Marc von Pawlowski)로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 패트리샤 쿡(Mme Patricia Cook), ISO 편집 관리자는 크리스틴 간손레(Ms Christelle Gansonre) 등으로 조사됐다.범위는 수혈용 병 및 백, 주사약 병과 앰블, 유리 실린더, 카트리지, 사전 충전형 주사기와 같은 용기의 표준화다. 기부 세트, 비전기식 휴대용 주입 장치, 채혈 시스템 등과 같은 응용시스템의 표준화, 혈액은행에 있는 수혈, 주입, 주사, 혈액 가공장비를 위한 부속품의 표준화 등도 포함된다.또한 장비를 위한 용어, 요구사항, 테스트 방법에 대한 표준화다. 재료 및 엘라스토머 마감, 캡 및 포트, 피펫 등과 같은 부품의 품질 및 성능에 대한 사양과 테스트 방법에 대한 표준화도 포함된다. 기본 포장 재료에 대한 품질 관리 시스템의 표준화도 범위에 속한다.다만 ISO/TC 84가 적용되는 의약품, 사전 충전되지 않은 주사기 및 바늘, 혈관 내 카테터의 자가 투여용 계량 장치 및 공급품의 성능 요구사항은 제외된다. ISO/TC 121이 적용되는 호흡기 치료용 기기, ISO/TC 106이 적용되는 치과용 카트리지 주사기 홀더 등도 포함되지 않는다.현재 ISO/TC 76 사무국의 직접적인 책임 하에 발행된 표준은 84개며 개발 중에 있는 표준은 16개, 참여하고 있는 회원은 23명, 참관 회원은 23명이다.□ ISO/TC 76 사무국의 직접 책임 하에 발행된 표준 10개 목록▲ISO 719:2020 Glass — Hydrolytic resistance of glass grains at 98 °C — Method of test and classification▲ISO 720:2020 Glass — Hydrolytic resistance of glass grains at 121 °C — Method of test and classification▲ISO 1135-3:2016 Transfusion equipment for medical use — Part 3: Blood-taking sets for single use▲ISO 1135-4:2015 Transfusion equipment for medical use — Part 4: Transfusion sets for single use, gravity feed▲ISO 1135-5:2015 Transfusion equipment for medical use — Part 5: Transfusion sets for single use with pressure infusion apparatus▲ISO 3749:2022 Glass syringes — Determination of extractable tungsten▲ISO 3826-1:2019 Plastics collapsible containers for human blood and blood components — Part 1: Conventional containers▲ISO 3826-1:2019/Amd 1:2023 Plastics collapsible containers for human blood and blood components — Part 1: Conventional containers — Amendment 1▲ISO 3826-2:2008 Plastics collapsible containers for human blood and blood components — Part 2: Graphical symbols for use on labels and instruction leaflets▲ISO 3826-3:2006 Plastics collapsible containers for human blood and blood components — Part 3: Blood bag systems with integrated features□ ISO/TC 76 사무국의 직접 책임 하에 개발 중인 표준 10개 목록▲ISO/CD 1135-4 Transfusion equipment for medical use — Part 4: Transfusion sets for single use, gravity feed▲ISO/CD 1135-5 Transfusion equipment for medical use — Part 5: Transfusion sets for single use with pressure infusion apparatus▲ISO/DIS 4802-1 Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification▲ISO/DIS 4802-2 Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification▲ISO/CD 8417 Risk management of particulate contamination for devices with intravascular access▲ISO/AWI 8536-6 Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles▲ISO/AWI 8536-13 Infusion equipment for medical use — Part 13: Graduated flow regulators for single use with fluid contact▲ISO/AWI 8871-5 Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 5: Functional requirements and testing▲ISO/AWI 11040-3 Prefilled syringes — Part 3: Seals for dental local anaesthetic cartridges▲ISO/DIS 11040-4 Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
-
[특집] ISO/TC 74 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 74[STANDBY] 시멘트 및 석회(Cement and lime)와 관련된 기술위원회는 1947년 구성된 TC1~TC67, 1948년 구성된 TC 69, 1949년에 구성된 TC 70~72, 1972년 구성된 TC68과는 달리 1950년 만들어졌다.사무국은 벨기에표준국(Bureau of Normalization, NBN)에서 맡고 있다. 위원회는 필립 반 릭스탈(Dr Filip Van Rickstal)이 책임진다. 현재 의장은 공석이다.ISO 기술 프로그램 관리자는 안나 카테리나 로시(Dr Anna Caterina Rossi), ISO 편집 관리자는 제시카 나바리아(Ms Jessica Navarria) 등으로 조사됐다.범위는 다양한 건축 및 엔지니어링, 건축 자재를 함께 묶거나 모든 종류의 페이스트(paste), 모르타르(mortar), 콘크리트(concrete)의 구성요소로 사용되는 시멘트 및 석회의 정의, 테스트 및 특성화 방법 등을 포함한 표준화다.현재 ISO/TC 74 사무국의 직접적인 책임 하에 발행된 표준은 7개며 참여하고 있는 회원은 28명, 참관 회원은 45명이다. ISO/TC 74 기술위원회는 대기상태(STANDBY)에 있다.대기상태(STANDBY)의 위원회는 진행 중인 작업 아이템이 없지만 미래에 대해 예측할 수 없어 위원회 책임 하에 있는 표준을 지속적으로 검토해 야한다.□ ISO/TC 74 사무국의 직접 책임 하에 발행된 표준 7개 목록▲ISO 679:2009 Cement — Test methods — Determination of strength▲ISO 863:2008 Cement — Test methods — Pozzolanicity test for pozzolanic cements▲ISO 9597:2008 Cement — Test methods — Determination of setting time and soundness▲ISO/TR 12389:2009 Methods of testing cement — Report of a test programme — Chemical analysis by x-ray fluorescence▲ISO 29581-1:2009 Cement — Test methods — Part 1: Analysis by wet chemistry▲ISO 29581-2:2010 Cement — Test methods — Part 2: Chemical analysis by X-ray fluorescence▲ISO 29582-1:2009 Methods of testing cement — Determination of the heat of hydration — Part 1: Solution method참고로 벨기에표준국(NBN)은 2003년 4월3일 표준화법(Standardization Act)에 의해 설립됐다. 이전 IBN/BIN(Institut belge de normalization)을 대신하는 공공기관이다.
-
[독일] 엔티웨어(NT-ware), 정보 보안 관리 시스템 국제 표준 ISO 27001 인증 획득독일 소프트웨어 기업 엔티웨어(NT-ware)에 따르면 정보 보안 관리 시스템 국제 표준 ISO 27001 인증을 획득했다. 엔티웨어는 높은 보안 및 데이터 보호 수준을 달성하기 위해 노력해왔다. 보안 위반은 재정적 손실, 비즈니스 중단 및 이미지 훼손을 포함해 광범위한 손실을 초래할 수 있기 때문이다. 엔티웨어는 uniFLOW 온라인(Online)을 구현함으로써 민감한 고객 데이터의 보안을 보장한다.이번 인증 획득을 위한 인증 범위에는 클라우드 기반 프린팅 및 스캔 관리 솔루션인 uniFLOW 온라인에 대한 설계, 계획, 개발, QA, 지원 및 운영이 포함된다.또한 다음과 같은 핵심 요소를 포함해 광범위한 측정 및 요소를 통해 인증이 이뤄졌다. 세부 내용은 △ISMS 프레임워크에서 요구하는 회사 보안 정책의 정의 및 전달 △정보 자산(시스템, 서비스, 랩탑, 서버, 인프라 및 사람)의 인벤토리 △위험 관리(위험 등록, 평가, 처리 및 모니터링) △직원 교육 및 인식 프로그램 등이다.엔티웨어는 인증을 통해 정보 보안 및 데이터 보호를 보장하기 위한 지속적인 개선 프로세스를 수립했다. 데이터 침해가 가져올 수 있는 심각한 손해로부터 고객을 보호하기 위한 목적이다.
-
[특집] ISO/TC 70 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 70 내연기관(Internal combustion engines)과 관련된 기술위원회는 1947년 구성된 TC1~TC67, 1948년 구성된 TC 69, 1972년 구성된 TC68과 달리 1949년 만들어졌다.사무국은 중국 국가표준화관리위원회(国家标准化管理委员会, SAC)에서 맡고 있다. 위원회는 웨이빈 지(Mr Weibin Ji)이 책임진다. 의장은 슈링 우(Mr Xuling Wu)으로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 이사벨 베가(Ms Isabelle Vega), ISO 편집 관리자는 아룬 ABY 파라에카틸(Mr Arun ABY Paraecattil) 등으로 조사됐다.범위는 엔진과 구동 기계 및 환경 간 관계를 고려한 정의, 성능/테스트 및 특수 요구 사항을 포함해 왕복 및 회전 변위 내연 기관 분야의 표준화다.■ 단, 도로 차량 및 항공기를 추진하는 데 사용되는 왕복 및 회전 변위 엔진은 제외한다.현재 ISO/TC 70 사무국의 직접적인 책임하에 발행된 표준은 49개며 ISO/TC 70 사무국과 관련해 발행된 표준은 74개다.ISO/TC 70 사무국의 직접적인 책임하에 개발 중인 표준은 4개 ISO/TC 70 사무국과 관련해 개발 중인 표준은 7개다. 참여하고 있는 회원은 15명, 참관 회원은 23명이다.□ ISO/TC 70 사무국의 직접적인 책임하에 발행된 표준 15개 목록▲ISO 1204:1990 Reciprocating internal combustion engines — Designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine▲ISO 2261:1994 Reciprocating internal combustion engines — Hand-operated control devices — Standard direction of motion▲ISO 2710-1:2017 Reciprocating internal combustion engines — Vocabulary — Part 1: Terms for engine design and operation▲ISO 2710-2:2019 Reciprocating internal combustion engines — Vocabulary — Part 2: Terms for engine maintenance▲ISO 3046-1:2002 Reciprocating internal combustion engines — Performance — Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods — Additional requirements for engines for general use▲ISO 3046-3:2006 Reciprocating internal combustion engines — Performance — Part 3: Test measurements▲ISO 3046-4:2009 Reciprocating internal combustion engines — Performance — Part 4: Speed governing▲ISO 3046-5:2001 Reciprocating internal combustion engines — Performance — Part 5: Torsional vibrations▲ISO 3046-6:2020 Reciprocating internal combustion engines — Performance — Part 6: Overspeed protection▲ISO 6798-1:2020 Reciprocating internal combustion engines — Measurement of sound power level using sound pressure — Part 1: Engineering method▲ISO 6798-2:2020 Reciprocating internal combustion engines — Measurement of sound power level using sound pressure — Part 2: Survey method▲ISO 6798-3:2022 Reciprocating internal combustion engines — Measurement of sound power level using sound pressure — Part 3: Survey method for use in situ▲ISO 6826:2022 Reciprocating internal combustion engines — Fire protection▲ISO 7967-1:2005 Reciprocating internal combustion engines — Vocabulary of components and systems — Part 1: Structure and external covers▲ISO 7967-2:2010 Reciprocating internal combustion engines — Vocabulary of components and systems — Part 2: Main running gear□ ISO/TC 70 사무국의 직접적인 책임하게 개발 중인 표준 4개 목록▲ISO/WD 8528-5 Reciprocating internal combustion engine driven alternating current generating sets — Part 5: Generating sets▲ISO/FDIS 8528-6 Reciprocating internal combustion engine driven alternating current generating sets — Part 6: Test methods▲ISO/WD 8528-13 Reciprocating internal combustion engine driven alternating current generating sets — Part 13: Safety▲ISO/WD TS 19425 Reciprocating internal combustion engines — Measurement method for air cleaners — Sound power level of combustion air inlet noise and insertion loss using sound pressure□ ISO/TC 70 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 70/SC 7 Tests for lubricating oil filters ; 발행된 표준 14개, 개발 중인 표준 3개▲ISO/TC 70/SC 8 Acceptance sampling ; 발행된 표준 11개, 개발 중인 표준 0개▲ISO/TC 68/SC 6 Measurement methods and results ; 발행된 표준 36개, 개발 중인 표준 5개▲ISO/TC 68/SC 7 Applications of statistical and related techniques for the implementation of Six Sigma ; 발행된 표준 13개, 개발 중인 표준 0개▲ISO/TC 68/SC 8 Exhaust gas emission measurement ; 발행된 표준 10개, 개발 중인 표준 0개