검색결과
-
[특집-기술위원회] TC 215 - 의료 정보학(Health informatics)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 △1994년 TC 210, TC 211 △1996년 TC 213, TC 214 등이 있다.ISO/TC 215 의료 정보학(Health informatics)과 관련된 기술위원회는 1998년 결성됐다. 사무국은 미국 표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 레이첼 호손(Ms Rachel Hawthorne)가 책임지고 있다. 현재 의장은 토드 쿠퍼(Mr Todd Cooper)이며 임기는 2026년 말까지다. ISO 기술 프로그램 관리자는 마호 다카하시(Mme Maho Takahashi), ISO 편집 관리자는 발레리아 아가넨노네(Ms Valeria Agamennone) 등이다.범위는 의료 관련 데이터, 의료 시스템의 모든 측면을 지원하고 활성화하는 지식의 수집, 교환 및 사용을 촉진하기 위한 의료 정보학 분야의 표준화다.현재 ISO/TC 215 사무국과 관련해 발행된 표준은 237개며 ISO/TC 215 사무국의 직접적인 책임 하에 발행된 표준은 225개다.ISO/TC 215과 관련해 개발 중인 표준은 64개며 이중 ISO/TC 215 사무국의 직접적인 책임 하에 개발 중인 표준은 62개다. 참여하고 있는 회원은 35개국, 참관 회원은 32개국이다.□ ISO/TC 215 사무국의 직접적인 책임 하에 발행된 표준 225개 중 15개 목록▷ISO 1828:2012 Health informatics — Categorial structure for terminological systems of surgical procedures▷ISO/TR 4421:2023 Health informatics — Introduction to Ayurveda informatics▷ISO/TS 5044:2023 Health informatics — Information model for quality control of traditional Chinese medicinal products▷ISO/TS 5118:2022 Health informatics — Categorial structure of representation for evaluation of clinical practice guidelines of traditional Chinese medicine▷ISO/TS 5346:2022 Health informatics — Categorial structure for representation of traditional Chinese medicine clinical decision support system▷ISO 5477:2023 Health informatics — Interoperability of public health emergency preparedness and response information systems▷ISO/TS 5499:2024 Health informatics — Clinical particulars — Core principles for the harmonization of therapeutic indications terms and identifiers▷ISO/TS 5568:2022 Health informatics — Traditional Chinese medicine — Labelling metadata of human biological sample information▷ISO/TS 5569:2023 Health informatics — Conceptual data model for Chinese medicinal herbs▷ISO/TR 9143:2023 Health informatics — Sex and gender in electronic health records▷ISO 10159:2011 Health informatics — Messages and communication — Web access reference manifest▷ISO 10781:2023 Health informatics — HL7 Electronic Health Record-System Functional Model, Release 2.1 (EHR FM)▷ISO/IEEE 11073-00103:2015 Health informatics — Personal health device communication — Part 00103: Overview▷ISO/IEEE 11073-10101:2020 Health informatics — Device interoperability — Part 10101: Point-of-care medical device communication — Nomenclature▷ISO/IEEE 11073-10102:2014 Health informatics — Point-of-care medical device communication — Part 10102: Nomenclature — Annotated ECG□ ISO/TC 215 사무국의 직접적인 책임 하에 개발 중인 표준 62개 중 15개 목록▷ISO/AWI TR 4419 Health informatics — Reducing clinicians burden▷ISO/DTS 5384 Health informatics - Categorial Structure and Data Elements for the Identification and Exchange of Immunization Data▷ISO/CD TS 5615 Health informatics — Accelerating Safe, Effective and Secure Remote Connected Care and Mobile Health Through Standards-Based Interoperability Solutions Addressing Gaps Revealed by Pandemics▷ISO/DTS 5777 Health informatics — The architecture of internet healthcare service network▷ISO/DTS 5788 Health informatics — Internet healthcare service pattern▷ISO/CD TS 6201.2 Health Informatics — Personalized Digital Health -Framework▷ISO/CD TS 6204 Health Informatics — Categorial structures for representation of Ayurvedic medicinal water — Decocting process in Ayurveda▷ISO/AWI TS 6226 Health informatics — Reference architecture for syndromic surveillance systems for infectious diseases▷ISO/DTR 6231 Health informatics — Standardizing graphical content▷ISO/CD TS 6268-1 Health informatics — Cybersecurity framework for telehealth environments — Part 1: Overview and Concepts▷ISO/AWI TS 6268-2 Health informatics — Cybersecurity framework for telehealth environments — Part 2: Cybersecurity reference models of telehealth▷ISO/CD TS 7122 Health Informatics — Guidelines for exchanging data generated by POCT (Point of Care Testing) devices between screening center and clinical laboratory▷ISO/AWI TS 9166 Health Informatics — Guidelines for self-assessment questionnaire systems▷ISO/DTS 9320 Health informatics — Standardized data set for transfer of hemodialysis patients▷ISO/DTS 9321 Health informatics — General requirements of multi-centre medical data collaborative analysis□ ISO/TC 215 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 215/SC 1 Genomics Informatics ; 발행된 표준 12개, 개발 중인 표준 2개
-
[특집-기술위원회] TC 213 - 치수와 기하학적 제품의 사양 및 검증(Dimensional and geometrical product specifications and verification)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 △1994년 TC 210, TC 211 등이 있다.ISO/TC 213 치수와 기하학적 제품의 사양 및 검증(Dimensional and geometrical product specifications and verification)과 관련된 기술위원회는 1996년 결성됐다. 사무국은 영국 표준협회(British Standards Institution, BSI)에서 맡고 있다.위원회는사라 켈리(Miss Sarah Kelly)가 책임지고 있다. 현재 의장은 이안 맥클라우드(Mr Iain Macleod)이며 임기는 2025년말까지다. ISO 기술 프로그램 관리자는 이사벨 베가(Ms Isabelle Vega), ISO 편집 관리자는 니콜라 페루(Ms Nicola Perou) 등이다.범위는 기하학적 제품 사양(GPS) 분야의 표준화다. 즉 치수 및 기하학적 공차, 표면 특성 및 관련 검증 원리, 치수 및 기하학적 측정의 불확실성을 포함한 측정 장비 및 교정 요구 사항을 다루는 거시 및 미세 형상 사양이다.표준화에는 기본 레이아웃과 도면 표시(기호)에 대한 설명이 포함된다. 단, 도면 표시(기호)의 특정 비율 및 치수 정의, 실행은 제외된다.현재 ISO/TC 213 사무국의 직접적인 책임 하에 발행된 표준은 147개며 ISO/TC 213 사무국의 직접적인 책임 하에 개발 중인 표준은 22개다. 참여하고 있는 회원은 26개국, 참관 회원은 25개국이다.□ ISO/TC 213 사무국의 직접적인 책임 하에 발행된 표준 147개 중 15개 목록▷ISO 1:2022 Geometrical product specifications (GPS) — Standard reference temperature for the specification of geometrical and dimensional properties▷ISO 286-1:2010 Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits▷ISO 286-1:2010/Cor 1:2013 Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits — Technical Corrigendum 1▷ISO 286-2:2010 Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts▷ISO 286-2:2010/Cor 1:2013 Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts — Technical Corrigendum 1▷ISO 463:2006 Geometrical Product Specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of mechanical dial gauges▷ISO 463:2006/Cor 1:2007 Geometrical Product Specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of mechanical dial gauges — Technical Corrigendum 1▷ISO 463:2006/Cor 2:2009 Geometrical Product Specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of mechanical dial gauges — Technical Corrigendum 2▷ISO 1101:2017 Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out▷ISO 1119:2011 Geometrical product specifications (GPS) — Series of conical tapers and taper angles▷ISO 1660:2017 Geometrical product specifications (GPS) — Geometrical tolerancing — Profile tolerancing▷ISO 1938-1:2015 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size▷ISO 1938-2:2017 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Reference disk gauges▷ISO 2538-1:2014 Geometrical product specifications (GPS) — Wedges — Part 1: Series of angles and slopes▷ISO 2538-2:2014 Geometrical product specifications (GPS) — Wedges — Part 2: Dimensioning and tolerancing□ ISO/TC 213 사무국의 직접적인 책임 하에 개발 중인 표준 22개 중 15개 목록▷ISO/CD 1938-1 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size▷ISO/AWI 2768 General tolerances▷ISO/DIS 5059-1 Geometrical product specifications (GPS) — Dimensional measuring equipment: inside micrometers — Part 1: Two-point inside micrometers — Design and metrological characteristics▷ISO/FDIS 5459 Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems▷ISO/DIS 5463 Geometrical product specifications (GPS) — Form measuring equipment; Rotary axis form measuring instruments — Design and metrological characteristics▷ISO/CD 10360-102 Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 102: The language of symbols G3▷ISO/AWI 12179 Geometrical product specifications (GPS) — Surface texture: Profile method — Calibration of contact (stylus) instruments▷ISO/DIS 14405-1 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes▷ISO/CD TS 15530-2 Geometrical Product Specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 2: Part 2: Evaluating task-specific measurement uncertainty by multiple measurement strategies using a single uncalibrated workpiece▷ISO/DIS 16610-21 Geometrical product specifications (GPS) — Filtration — Part 21: Linear profile filters: Gaussian filters▷ISO/CD 16610-22 Geometrical product specifications (GPS) — Filtration — Part 22: Linear profile filters: Spline filters▷ISO/DIS 16610-31 Geometrical product specifications (GPS) — Filtration — Part 31: Robust profile filters: Gaussian regression filters▷ISO/DIS 16610-45 Geometrical product specifications (GPS) — Filtration — Part 45: Morphological profile filters: Segmentation▷ISO 18183-1 Geometrical product specifications (GPS) — Partition — Part 1: Vocabulary and basic concepts▷ISO/CD TR 23850 Geometrical product specifications (GPS) — Association — Mathematical concepts
-
[특집-기술위원회] TC 211 - 지리정보/지리학(Geographic information/Geomatics)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 등이 있다.ISO/TC 211지리정보/지리학(Geographic information/Geomatics)과 관련된 기술위원회는 TC 210과 마찬가지로 1994년 결성됐다. 사무국은 스웨덴 국립표준청(Svenska institutet för standarder, SIS)에서 맡고 있다.위원회는 마츠 올린(Mr Mats Åhlin)가 책임지고 있다. 현재 의장은 피터 파슬로(Mr Peter Parslow)이며 임기는 2024년말까지다. ISO 기술 프로그램 관리자는 하킴 음킨시(Mr Hakim Mkinsi), ISO 편집 관리자는 앨리슨 레이드 자몬드(Ms Alison Reid-Jamond) 등이다.범위는 디지털 지리정보 분야의 표준화다. 지구와 관련된 위치와 직간접적으로 연관된 물체나 현상에 관한 정보에 대한 구조화된 표준 세트 확립을 목표로 하고 있다.지리 정보의 범위 내에서 이러한 표준은 데이터 관리를 위한 방법, 도구 및 서비스를 지정할 수 있다. 데이터 관리는 사용자 및 시스템을 위한 데이터 획득, 처리, 분석, 접근, 제시 및 출판이 포함된다.이 작업은 가능한 경우 정보 기술 및 데이터에 대한 적절한 표준과 연결되어야 하며 지리 데이터를 사용하는 부문별 응용 프로그램 개발을 위한 프레임워크를 제공해야 된다.현재 ISO/TC 211 사무국의 직접적인 책임 하에 발행된 표준은 97개며 ISO/TC 211 사무국의 직접적인 책임 하에 개발 중인 표준은 26개다. 참여하고 있는 회원은 38개국, 참관 회원은 35개국이다.□ ISO/TC 211 사무국의 직접적인 책임 하에 발행된 표준 97개 중 15개 목록▷ISO 6709:2022 Standard representation of geographic point location by coordinates▷ISO 19101-1:2014 Geographic information — Reference model — Part 1: Fundamentals▷ISO 19101-2:2018 Geographic information — Reference model — Part 2: Imagery▷ISO 19103:2015 Geographic information — Conceptual schema language▷ISO 19104:2016 Geographic information — Terminology▷ISO 19105:2022 Geographic information — Conformance and testing▷ISO 19106:2004 Geographic information — Profiles▷ISO 19107:2019 Geographic information — Spatial schema▷ISO 19108:2002 Geographic information — Temporal schema▷ISO 19108:2002/Cor 1:2006 Geographic information — Temporal schema — Technical Corrigendum 1▷ISO 19109:2015 Geographic information — Rules for application schema▷ISO 19110:2016 Geographic information — Methodology for feature cataloguing▷ISO 19111:2019 Geographic information — Referencing by coordinates▷ISO 19111:2019/Amd 1:2021 Geographic information — Referencing by coordinates — Amendment 1▷ISO 19111:2019/Amd 2:2023 Geographic information — Referencing by coordinates — Amendment 2□ ISO/TC 211 사무국의 직접적인 책임 하에 개발 중인 표준 26개 중 15개 목록▷ISO/DIS 19103 Geographic information — Conceptual schema language▷ISO/CD 19109 Geographic information — General feature model and rules for application schema▷ISO/AWI TR 19115-4 Geographic information – Metadata — Part 4: JSON schema implementation of metadata fundamentals▷ISO/DIS 19116 Geographic information — Positioning services▷ISO/AWI TR 19121 Geographic information — Imagery and gridded data▷ISO/AWI 19123-2 Geographic information — Schema for coverage geometry and functions — Part 2: Coverage implementation schema▷ISO/AWI TS 19123-4 Geographic information — Schema for coverage geometry and functions — Part 4: Tiling Schema▷ISO/AWI TS 19124-2 Geographic information — Calibration and validation of remote sensing data and derived products — Part 2: SAR▷ISO/AWI 19127 Geographic information — Geodetic register▷ISO/AWI TS 19130-2 Geographic information — Imagery sensor models for geopositioning — Part 2: SAR, InSAR, lidar and sonar▷ISO/CD 19135 Geographic information registration — Requirements▷ISO/DTS 19144-3 Geographic information — Classification systems — Part 3: Land Use Meta Language (LUML)▷ISO/DIS 19152-2 Geographic information — Land Administration Domain Model (LADM) — Part 2: Land registration▷ISO/FDIS 19152-3 Geographic information — Land Administration Domain Model (LADM) — Part 3: Marine georegulation▷ISO/DIS 19152-4 Geographic information — Land Administration Domain Model (LADM) — Part 4: Valuation information
-
[특집-기술위원회] TC 210 - 의료기기를 포함한 건강 목적 제품의 품질 관리 및 이에 상응하는 일반적인 측면(Quality management and corresponding general aspects for products with a health purpose including medical devices스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 등이 있다.ISO/TC 210 의료기기를 포함한 건강 목적 제품의 품질 관리 및 이에 상응하는 일반적인 측면(Quality management and corresponding general aspects for products with a health purpose including medical devices)과 관련된 기술위원회는 1994년 결성됐다. 사무국은 미국 표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 아미르 어바우탈레브(Mr Amir Aboutaleb)가 책임지고 있다. 현재 의장은 스콧 A. 콜번(Mr Scott A. Colburn)이며 임기는 2025년말까지다. ISO 기술 프로그램 관리자는 키르시 실란데르-반 후넨(Mrs Kirsi Silander-van Hunen), ISO 편집 관리자는 클라우디아 루에제(Ms Claudia Lueje) 등이다.범위는 액체 및 가스용 커넥터를 포함하는 건강 목적의 제품에 대한 품질 관리 및 상응하는 일반적인 측면과 관련한 분야의 요구 사항 및 지침에 관한 표준화다.단, △ISO/TC 176에서 다루는 일반 품질 관리 표준 △의약품 및 의료 서비스에 대한 품질 관리 표준은 제외한다.참고로 건강 목적의 제품에는 의료 기기, 인접 제품(또는 액세서리라고도 할 수 있음) 및 의료 기기와 유사한 위험 프로필을 가진 제품을 포함해 건강과 관련된 사용을 위한 제품이 포함된다.현재 ISO/TC 210 사무국의 직접적인 책임 하에 발행된 표준은 30개며 ISO/TC 210 사무국의 직접적인 책임 하에 개발 중인 표준은 13개다. 참여하고 있는 회원은 39개국, 참관 회원은 28개국이다.□ ISO/TC 210 사무국의 직접적인 책임 하에 발행된 표준 30개 중 15개 목록▷ISO 13485:2016 Medical devices — Quality management systems — Requirements for regulatory purposes▷ISO 14971:2019 Medical devices — Application of risk management to medical devices▷ISO 15223-1:2021 Medical devices — Symbols to be used with information to be supplied by the manufacturer — Part 1: General requirements▷ISO 15223-2:2010 Medical devices — Symbols to be used with medical device labels, labelling, and information to be supplied — Part 2: Symbol development, selection and validation▷ISO 18250-1:2018 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 1: General requirements and common test methods▷ISO 18250-3:2018 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 3: Enteral applications▷ISO 18250-6:2019 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 6: Neural applications▷ISO 18250-7:2018 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 7: Connectors for intravascular infusion▷ISO 18250-8:2018 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 8: Citrate-based anticoagulant solution for apheresis applications▷ISO/TR 20416:2020 Medical devices — Post-market surveillance for manufacturers▷ISO 20417:2021 Medical devices — Information to be supplied by the manufacturer▷ISO/TR 24971:2020 Medical devices — Guidance on the application of ISO 14971▷IEC 62304:2006 Medical device software — Software life cycle processes▷IEC 62304:2006/Amd 1:2015 Medical device software — Software life cycle processes — Amendment 1▷IEC 62366-1:2015 Medical devices — Part 1: Application of usability engineering to medical devices□ ISO/TC 210 사무국의 직접적인 책임 하에 개발 중인 표준 13개 목록▷ISO/WD TS 5137 Medical device maintenance management for healthcare delivery organizations▷ISO 15223-1:2021/AWI Amd 1 Medical devices — Symbols to be used with information to be supplied by the manufacturer — Part 1: General requirements — Amendment 1▷ISO/AWI 15223-2 Medical devices — Symbols to be used with medical device labels, labelling, and information to be supplied — Part 2: Symbol development, selection and validation▷ISO/AWI 18250-3 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 3: Enteral applications▷ISO 18250-8:2018/AWI Amd 1 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 8: Citrate-based anticoagulant solution for apheresis applications — Amendment 1▷ISO/CD 20417 Medical devices — Information to be supplied by the manufacturer▷ISO/AWI 23421 Medical devices — Terminology — Terms used in the field of quality management and corresponding general aspects for products with a health purpose including medical devices▷ISO/CD TS 24971-2 Medical devices — Guidance on the application of ISO 14971 — Part 2: Machine learning in artificial intelligence▷ISO/DIS 80369-1 Small-bore connectors for liquids and gases in healthcare applications — Part 1: General requirements▷ISO/FDIS 80369-2 Small-bore connectors for liquids and gases in healthcare applications — Part 2: Connectors for respiratory applications▷IEC/AWI 80369-5 Small-bore connectors for liquids and gases in healthcare applications — Part 5: Connectors for limb cuff inflation applications▷ISO/DIS 80369-6 Small bore connectors for liquids and gases in healthcare applications — Part 6: Connectors for neural applications▷ISO/FDIS 80369-20 Small-bore connectors for liquids and gases in healthcare applications — Part 20: Common test methods
-
[특집-기술위원회] TC 209 - 클린룸 및 관련 제어 환경(Cleanrooms and associated controlled environments)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 등이 있다.ISO/TC 209 클린룸 및 관련 제어 환경(Cleanrooms and associated controlled environments)과 관련된 기술위원회는 TC 207과 마찬가지로 1993년 결성됐다. 사무국은 미국 표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 로버트 미엘케(Mr Robert Mielke)가 책임지고 있다. 현재 의장은 고든 엘리(Mr Gordon Ely)이며 임기는 2026년말까지다. ISO 기술 프로그램 관리자는 마호 타카하시(Mme Maho Takahashi), ISO 편집 관리자는 아룬 ABY 파라에카틸(Mr Arun ABY Paraecattil) 등이다.범위는 시설, 지속 가능성, 장비, 프로세스 및 운영과 관련된 기타 속성 및 특성 뿐 아니라 청결도를 제어하기 위한 클린룸 및 관련 제어 환경에 대한 표준화다.현재 ISO/TC 209 사무국의 직접적인 책임 하에 발행된 표준은 20개며 ISO/TC 209 사무국의 직접적인 책임 하에 개발 중인 표준은 3개다. 참여하고 있는 회원은 26개국, 참관 회원은 22개국이다.□ ISO/TC 209 사무국의 직접적인 책임 하에 발행된 표준 20개 중 15개 목록▷ISO 14644-1:2015 Cleanrooms and associated controlled environments — Part 1: Classification of air cleanliness by particle concentration▷ISO 14644-2:2015 Cleanrooms and associated controlled environments — Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration▷ISO 14644-3:2019 Cleanrooms and associated controlled environments — Part 3: Test methods▷ISO 14644-4:2022 Cleanrooms and associated controlled environments — Part 4: Design, construction and start-up▷ISO 14644-5:2004 Cleanrooms and associated controlled environments — Part 5: Operations▷ISO 14644-7:2004 Cleanrooms and associated controlled environments — Part 7: Separative devices (clean air hoods, gloveboxes, isolators and mini-environments)▷ISO 14644-8:2022 Cleanrooms and associated controlled environments — Part 8: Assessment of air cleanliness by chemical concentration (ACC)▷ISO 14644-9:2022 Cleanrooms and associated controlled environments — Part 9: Assessment of surface cleanliness for particle concentration▷ISO 14644-10:2022 Cleanrooms and associated controlled environments — Part 10: Assessment of surface cleanliness for chemical contamination▷ISO 14644-12:2018 Cleanrooms and associated controlled environments — Part 12: Specifications for monitoring air cleanliness by nanoscale particle concentration▷ISO 14644-13:2017 Cleanrooms and associated controlled environments — Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications▷ISO 14644-14:2016 Cleanrooms and associated controlled environments — Part 14: Assessment of suitability for use of equipment by airborne particle concentration▷ISO 14644-15:2017 Cleanrooms and associated controlled environments — Part 15: Assessment of suitability for use of equipment and materials by airborne chemical concentration▷ISO 14644-16:2019 Cleanrooms and associated controlled environments — Part 16: Energy efficiency in cleanrooms and separative devices▷ISO 14644-17:2021 Cleanrooms and associated controlled environments — Part 17: Particle deposition rate applications□ ISO/TC 209 사무국의 직접적인 책임 하에 개발 중인 표준 3개 목록▷ISO/AWI 14644-5 Cleanrooms and associated controlled environments — Part 5: Operations▷ISO/CD TS 14644-19 Cleanrooms and associated controlled environments — Part 19: General technical requirements of modular isolation units for emergency medical use▷ISO/AWI 14644-20 Cleanrooms and associated controlled environments — Part 20: Microbiological contamination control
-
[특집-기술위원회] TC 206 - 파인 세라믹(Fine ceramics)… 모든 형태의 파인 세라믹 재료 및 제품 분야 표준화스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 △1988년 TC 192~TC 194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 등이 있다.ISO/TC 206 파인 세라믹(Fine ceramics)과 관련된 기술위원회는 TC 204, TC 205와 마찬가지로 1992년 결성됐다. 사무국은 일본 산업표준조사회(日本産業標準調査会, Japanese Industrial Standards Committee, JISC)에서 맡고 있다.위원회는 히로유키 미야자키(Dr Hiroyuki Miyazaki)가 책임지고 있다. 현재 의장은 이희수 교수(Prof Heesoo Lee)가 맡고 있다.ISO 기술 프로그램 관리자는 츄안유 추(Ms Chuanyu Zou), ISO 편집 관리자는 아룬 ABY 파라에카틸(Mr Arun ABY Paraecattil) 등이다.범위는 모든 형태의 파인 세라믹 재료 및 제품 분야 표준화다. 기계, 열, 화학, 전기, 자기, 광학 및 이들의 조합을 포함한 특정 기능 응용 분야를 위한 분말, 단일체, 코팅 및 복합재 등 모든 형태를 포함하고 있다. 파인 세라믹이라는 용어는 특정 기능적 특성을 지닌 고도로 가공된 고성능, 주로 비금속 무기 재료로 정의된다.참고로 파인 세라믹의 대체 용어는 고급 세라믹, 엔지니어링 세라믹, 테크니컬 세라믹 또는 고성능 세라믹이다. 파인 세라믹(Fine ceramics)은 절연체·내열재·구조재로 쓸수 있도록 고도기술로 개발된 새로운 세라믹을 말한다.현재 ISO/TC 206 사무국의 직접적인 책임 하에 발행된 표준은 156개며 ISO/TC 206 사무국의 직접적인 책임하에 개발 중인 표준은 32개다. 참여하고 있는 회원은 13개국, 참관 회원은 22개국이다.□ ISO/TC 206 사무국의 직접적인 책임 하에 발행된 표준 156개 중 15개 목록▷ISO 3169:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of impurities in aluminium oxide powders using inductively coupled plasma-optical emission spectrometry▷ISO 3180:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of calcium-phosphate-based powders for non-biomedical applications▷ISO 4825-1:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) --Test method for thermal property measurements of metalized ceramic substrates — Part 1: Evaluation of thermal resistance for use in power modules▷ISO 5189:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of metal impurities in silicon dioxide powders using inductively coupled plasma-optical emission spectrometry▷ISO 5618-1:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for GaN crystal surface defects — Part 1: Classification of defects▷ISO 5712:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) — Method for measuring the power generation characteristics of piezoelectric resonant devices for stand-alone power sources▷ISO 5722:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining tensile and shear creep of ceramic adhesive▷ISO 5803:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determination of monoclinic phase in zirconia▷ISO/TS 6857:2024 Fine ceramics (advanced ceramics, advanced technical ceramics) — Physical properties of ceramic composites — Guidelines for determination of void and fibre contents in polished cross section by image analysis▷ISO 10676:2010 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for water purification performance of semiconducting photocatalytic materials by measurement of forming ability of active oxygen▷ISO 10677:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) — Ultraviolet light source for testing semiconducting photocatalytic materials▷ISO 10678:2010 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue▷ISO 11894-1:2013 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for conductivity measurement of ion-conductive fine ceramics — Part 1: Oxide-ion-conducting solid electrolytes▷ISO 13124:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for interfacial bond strength of ceramic materials▷ISO 13125:2013 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for antifungal activity of semiconducting photocatalytic materials□ ISO/TC 206 사무국의 직접적인 책임 하에 개발 중인 표준 32개 중 15개 목록▷ISO/CD 4255 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic matrix composites at high temperature — Determination of axial tensile properties of tubes▷ISO/AWI 4825-2 Fine ceramics (advanced ceramics, advanced technical ceramics) --Test method for thermal property measurements of metalized ceramic substrates — Part 2: Evaluation of heat transfer characteristics for metalized ceramics substrate for power modules▷ISO/PRF 5618-2 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for GaN crystal surface defects — Part 2: Method for determining etch pit density▷ISO/CD 5770 Fine ceramics (advanced ceramics, advanced technical ceramics) — Relative method for determining thermal conductivity of ceramic coatings▷ISO/DIS 10678 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue▷ISO/AWI 10820 Fine ceramics (advanced ceramics, advanced technical ceramics) — Ultraviolet irradiation equipment using UV-A LEDs and optical radiometry for performance test of semiconducting photocatalytic materials▷ISO/DIS 14544 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at high temperature — Determination of compressive properties▷ISO/DIS 14574 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at high temperature — Determination of tensile properties▷ISO/CD 14705 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature▷ISO/WD 15733 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure — Determination of tensile properties▷ISO/AWI 17138 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at room temperature — Determination of flexural strength▷ISO/AWI 17561 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test methods for dynamic elastic moduli of monolithic ceramics at room temperature by sonic resonance and Impulse Excitation Technique (IET)▷ISO/CD 17590 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of tests for reinforcements — Determination of the tensile properties of ceramic filaments at elevated temperature in air using the hot grip technique▷ISO/AWI 17947-1 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of fine silicon nitride powders — Part 1: Wet chemical methods, X-ray fluorescence (XRF) using the fused cast-bead method, carrier-gas hot extraction (CGHE) and combustion methods▷ISO/AWI 18719 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of impurities in yttrium oxide powders using inductively coupled plasma-optical emission spectrometry
-
[특집-기술위원회] TC 205 - 건축 환경 디자인(Building environment design)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 △1988년 TC 192~TC 194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 등이 있다.ISO/TC 205 건축 환경 디자인(Building environment design)과 관련된 기술위원회는 TC 204와 마찬가지로 1992년 결성됐다. 사무국은 미국 표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 라이언 섄리(Mr Ryan Shanley)가 책임지고 있다. 현재 의장은 드레이크 에르베(Mr Drake Erbe)이며 임기는 2025년말 까지다.ISO 기술 프로그램 관리자는 스테판 소바쥬(M Stéphane Sauvage), ISO 편집 관리자는 클라우디아 루에제(Ms Claudia Lueje) 등이다.범위는 수용 가능한 실내 환경 및 실행 가능한 에너지 절약, 효율성을 위해 신규 건물의 설계 및 기존 건물 개조에 관한 표준화다.건축 환경 설계는 기술적 건축 시스템 및 관련 건축 측면을 다루며 관련 설계 프로세스, 설계 방법, 설계 결과 및 설계 단계 건물 커미셔닝을 포함하고 있다. 실내 환경에는 공기질과 열, 음향, 시각적 요소가 포함된다. 다음 내용들도 표준화에 포함된다.세부적으로 보면 △건물 설계 및 기존 건물 개조 설계에서 다룰 수 있는 실내 환경 품질 및 에너지와 관련된 지속 가능성 측면 △건축 환경 설계의 일반 원칙 △에너지 효율적인 건물 설계 △건물 및 개조 설계의 건물 자동화 및 제어 시스템 △건물 및 개조 설계의 실내 공기질 △건물의 실내 열 환경 및 개조 설계 △건물 및 개조 설계의 실내 음향 환경 △건물의 실내 시각적 환경 및 개조 설계 △복사를 포함한 냉난방 시스템 설계 △새 건물 및 개조 설계에 건물 환경 장비의 성능을 테스트하고 평가하는 방법의 적용 등이다.전체적인 접근 방식을 사용하는 ISO/TC163/WG4 공동 작업 그룹 TC 163 및 TC 205 에너지 성능 ISO/TC163/WG4 Joint working group TC 163 & TC 205 Energy performance)을 통해 ISO/TC 163과의 긴밀한 협력을 통해 건물 개조 뿐 아니라 신규 및 기존 건물의 에너지 성능에 관한 전체적인 평가의 표준화도 포함된다.표준화에는 △용어 및 정의 △건물 및 기술 시스템의 시스템 경계 △건축 요소의 에너지 성능을 고려한 건물의 전반적인 에너지 성능 평가 △건물 관련 시스템(난방, 냉방, 가정용 온수, 환기, 조명, 시스템 제어, 운송 및 기타 에너지 관련 시스템) △실내 및 실외 조건 △지역 에너지 생산(현장 및 지역 수준) △(사용) 에너지원(재생 가능 포함) △건물 커미셔닝 △전반적인 에너지 효율 평가 △건축물의 에너지 성능 및 에너지 성능 인증을 나타내는 수단 등이 있다.다만 △기타 인체공학적 요인 △대기 오염물질과 열, 음향 및 조명 특성을 측정하는 방법 △건축 환경의 열 성능 및 에너지 사용(ISO TC 163) △기존 건물의 건물 환경 장비 성능 및 등급을 테스트하는 방법 △기존 건물을 검사하거나 평가 △건설 등은 제외한다.현재 ISO/TC 205 사무국의 직접적인 책임 하에 발행된 표준은 49개며 ISO/TC 205 사무국의 직접적인 책임하에 개발 중인 표준은 10개다. 참여하고 있는 회원은 26개국, 참관 회원은 34개국이다.□ ISO/TC 205 사무국의 직접적인 책임 하에 발행된 표준 49개 중 15개 목록▷ISO 11855-1:2021 Building environment design — Embedded radiant heating and cooling systems — Part 1: Definitions, symbols, and comfort criteria▷ISO 11855-1:2021/Amd 1:2023 Building environment design — Embedded radiant heating and cooling systems — Part 1: Definitions, symbols, and comfort criteria — Amendment 1▷ISO 11855-2:2021 Building environment design — Embedded radiant heating and cooling systems — Part 2: Determination of the design heating and cooling capacity▷ISO 11855-2:2021/Amd 1:2023 Building environment design — Embedded radiant heating and cooling systems — Part 2: Determination of the design heating and cooling capacity — Amendment 1▷ISO 11855-3:2021 Building environment design — Embedded radiant heating and cooling systems — Part 3: Design and dimensioning▷ISO 11855-3:2021/Amd 1:2023 Building environment design — Embedded radiant heating and cooling systems — Part 3: Design and dimensioning — Amendment 1▷ISO 11855-4:2021 Building environment design — Embedded radiant heating and cooling systems — Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS)▷ISO 11855-4:2021/Amd 1:2023 Building environment design — Embedded radiant heating and cooling systems — Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) — Amendment 1▷ISO 11855-5:2021 Building environment design — Embedded radiant heating and cooling systems — Part 5: Installation▷ISO 11855-5:2021/Amd 1:2023 Building environment design — Embedded radiant heating and cooling systems — Part 5: Installation — Amendment 1▷ISO 11855-6:2018 Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 6: Control▷ISO 11855-6:2018/Amd 1:2023 Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 6: Control — Amendment 1▷ISO 11855-7:2019 Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 7: Input parameters for the energy calculation▷ISO 11855-7:2019/Amd 1:2024 Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 7: Input parameters for the energy calculation — Amendment 1▷ISO 11855-8:2023 Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 8: Electrical heating systems□ ISO/TC 205 사무국의 직접적인 책임 하에 개발 중인 표준 10개 목록▷ISO/TR 5863 Integrative design of the building envelope — General principles▷ISO/DIS 16484-2 Building automation and control systems (BACS) — Part 2: Hardware▷ISO/DIS 16484-4 Building automation and control systems (BACS) — Part 4: Control applications▷ISO/DIS 16813 Building environment design — Indoor environment — General principles▷ISO/WD 20734 Building Enviroment Design — Daylighting design procedure for indoor visual environment▷ISO/WD 21075 Design and assessment process of whole-building mechanical ventilation systems in residential buildings▷ISO/WD 22511-1 Design process of ventilative cooling systems — Part 1: Non-residential buildings▷ISO/AWI TS 23764 Methodology for achieving non-residential zero-energy buildings (ZEBs)▷ISO/CD 24359-1 Building commissioning process planning — Part 1: New buildings▷ISO/AWI TR 52032-2 Energy performance of buildings — Energy requirements and efficiencies of heating, cooling and domestic hot water (DHW) distribution systems — Part 2: Explanation and justification of ISO 52032-1
-
[특집-기술위원회] TC 202 - 미세선속 분석(Microbeam analysis)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 △1988년 TC 192~TC 194 △1989년 TC 195 △1990년 TC 197, TC 198 등이 있다.ISO/TC 202 미세선속 분석(Microbeam analysis)과 관련된 기술위원회는 TC 199, TC 201와 마찬가지로 1991년 결성됐다. 사무국은 중국 국가표준화관리위원회(国家标准化管理委员会, Standardization Administration of the P. R. C, SAC)에서 맡고 있다.위원회는 닝 자오(Mr Ning Zhao)가 책임지고 있다. 현재 의장은 지앙 자오(Mr Jiang Zhao)이며 임기는 2024년말 까지다.ISO 기술 프로그램 관리자는 스테판 소바(M Stéphane Sauvage), ISO 편집 관리자는 아룬 ABY 파라에카티(Mr Arun ABY Paraecattil) 등이다.범위는 입사빔으로 전자를 사용하고 감지 신호로 전자와 광자를 사용하는 마이크로빔 분석(측정, 매개변수, 방법 및 기준 물질) 분야의 표준화다.참고로 고체재료의 구성 및 구조적 특성을 분석하는 것이 목적이다. 분석량은 일반적으로 최대 10마이크로미터의 깊이와 100제곱마이크로미터 미만의 표면적을 포함한다.현재 ISO/TC 202 사무국과 관련해 발행된 표준은 30개며 ISO/TC 202 사무국의 직접적인 책임 하에 발행된 표준은 9개다.ISO/TC 202 사무국과 관련해 개발 중인 표준은 5개다. 참여하고 있는 회원은 9개국, 참관 회원은 13개국이다.□ ISO/TC 202 사무국의 직접적인 책임 하에 발행된 표준 9개 목록▷ISO 5820:2024 Microbeam analysis — Hyper-dimensional data file specification (HMSA)▷ISO 13067:2020 Microbeam analysis — Electron backscatter diffraction — Measurement of average grain size▷ISO 15632:2021 Microbeam analysis — Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA)▷ISO 20720:2018 Microbeam analysis — Methods of specimen preparation for analysis of general powders using WDS and EDS▷ISO 22029:2022 Microbeam analysis — EMSA/MAS standard file format for spectral-data exchange▷ISO 22309:2011 Microbeam analysis — Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above▷ISO 23703:2022 Microbeam analysis — Guidelines for misorientation analysis to assess mechanical damage of austenitic stainless steel by electron backscatter diffraction (EBSD)▷ISO 23749:2022 Microbeam analysis — Electron backscatter diffraction — Quantitative determination of austenite in steel▷ISO 24173:2024 Microbeam analysis — Guidelines for orientation measurement using electron backscatter diffraction□ ISO/TC 202 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 202/SC 1 Terminology ; 발행된 표준 3개, 개발 중인 표준 1개▷ISO/TC 202/SC 2 Electron probe microanalysis ; 발행된 표준 8개, 개발 중인 표준 1개▷ISO/TC 202/SC 3 Analytical electron microscopy ; 발행된 표준 6개, 개발 중인 표준 3개▷ISO/TC 202/SC 4 Scanning electron microscopy ; 발행된 표준 4개, 개발 중인 표준 0개
-
[특집-기술위원회] TC 201 - 표면 화학 분석(Surface chemical analysis)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 △1988년 TC 192~TC 194 △1989년 TC 195 △1990년 TC 197, TC 198 등이 있다.ISO/TC 201 표면 화학 분석(Surface chemical analysis)과 관련된 기술위원회는 TC 199와 마찬가지로 1991년 결성됐다. 사무국은 일본 산업표준조사회(日本産業標準調査会, Japanese Industrial Standards Committee, JISC)에서 맡고 있다.위원회는 사토시 곤다(Dr Satoshi Gonda)가 책임지고 있다. 현재 의장은 히데히코 노나카(Dr Hidehiko Nonaka)이다.ISO 기술 프로그램 관리자는 주안우 주(Ms Chuanyu Zou), ISO 편집 관리자는 아룬 ABY 파라에카티(Mr Arun ABY Paraecattil) 등이다.범위는 표면 화학 분석 분야의 표준화다. 표면 화학 분석에는 전자, 이온, 중성 원자 또는 분자, 광자의 빔이 시료 재료에 입사되어 산란되거나 방출된 전자, 이온, 중성 원자 또는 분자, 광자가 감지되는 분석 기술이 포함된다.또한 표면 위로 스캔하는 조사 및 표면 관련 신호를 감지하는 기술도 포함하지만 ISO/TC 202의 범위 내에 있는 주사전자현미경은 제외한다.참고로 현재 표면 화학 분석 기술을 사용하면 분석 정보는 표면에서 가까운 영역(일반적으로 20 nm 이내)의 정보를 얻을 수 있다. 분석 정보 대비 깊이 데이터(analytical information-versus-depth data)는 더 깊은 표면 분석 기술을 사용해 얻을 수 있다.현재 ISO/TC 201 사무국과 관련해 발행된 표준은 81개며 ISO/TC 201 사무국의 직접적인 책임 하에 발행된 표준은 8개다.ISO/TC 201 사무국과 관련해 개발 중인 표준은 22개며 ISO/TC 201 사무국의 직접적인 책임 하에 개발 중인 표준은 2개다. 참여하고 있는 회원은 13개국, 참관 회원은 12개국이다.□ ISO/TC 201 사무국의 직접적인 책임 하에 발행된 표준 8개 목록▷ISO 14706:2014 Surface chemical analysis — Determination of surface elemental contamination on silicon wafers by total-reflection X-ray fluorescence (TXRF) spectroscopy▷ISO 16413:2020 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry — Instrumental requirements, alignment and positioning, data collection, data analysis and reporting▷ISO 17331:2004 Surface chemical analysis — Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy▷ISO 17331:2004/Amd 1:2010 Surface chemical analysis — Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy — Amendment 1▷ISO 18337:2015 Surface chemical analysis — Surface characterization — Measurement of the lateral resolution of a confocal fluorescence microscope▷ISO/TS 18507:2015 Surface chemical analysis — Use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis▷ISO/TR 19693:2018 Surface chemical analysis — Characterization of functional glass substrates for biosensing applications▷ISO 24465:2023 Surface chemical analysis — Determination of the minimum detectability of surface plasmon resonance device□ ISO/TC 201 사무국의 직접적인 책임 하에 개발 중인 표준 2개 목록▷ISO/AWI TR 4550 SCA –Surface chemical analysis of bacteria and biofilms▷ISO/FDIS 23124 Surface chemical analysis — Measurement of lateral and axial resolutions of a Raman microscope□ ISO/TC 201 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 201/SC 1 Terminology ; 발행된 표준 3개, 개발 중인 표준 0개▷ISO/TC 201/SC 2 General procedures ; 발행된 표준 9개, 개발 중인 표준 2개▷ISO/TC 201/SC 3 Data management and treatment ; 발행된 표준 5개, 개발 중인 표준 1개▷ISO/TC 201/SC 4 Depth profiling ; 발행된 표준 6개, 개발 중인 표준 0개▷ISO/TC 201/SC 6 Secondary ion mass spectrometry ; 발행된 표준 12개, 개발 중인 표준 2개▷ISO/TC 201/SC 7 Electron spectroscopies ; 발행된 표준 23개, 개발 중인 표준 5개 ▷ISO/TC 201/SC 8 Glow discharge spectroscopy ; 발행된 표준 6개, 개발 중인 표준 3개▷ISO/TC 201/SC 9 Scanning probe microscopy ; 발행된 표준 8개, 개발 중인 표준 4개▷ISO/TC 201/SC 10 X-ray Reflectometry (XRR) and X-ray Fluorescence (XRF) Analysis ; 발행된 표준 1개, 개발 중인 표준 3개
-
[특집-기술위원회] TC 199 - 기계류 안전(Safety of machinery)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 △1988년 TC 192~TC 194 △1989년 TC 195 △1990년 TC 197, TC 198 등이 있다.ISO/TC 199 기계류 안전(Safety of machinery)과 관련된 기술위원회는 1991년 결성됐다. 사무국은 독일 표준화기구(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다.위원회는 크리스티안 톰(Mr Dr. rer. nat Christian Thom)가 책임지고 있다. 현재 의장은 오토 괴르네만(Mr Otto Görnemann)이다.ISO 기술 프로그램 관리자는 메르세 페레 에르난데스(Mme Mercè Ferrés Hernández), ISO 편집 관리자는 클라우디아 루에제(Ms Claudia Lueje) 등이다.범위는 ISO/IEC 가이드 51 프레임워크 및 ISO, IEC 기술 위원회와 협력해 용어, 방법론, 보호 장치 및 안전 장치를 통합한 기계 안전에 대한 기본 개념 및 일반 원칙의 표준화다.단, ISO/IEC Guide 51에 정의되어 있고 다른 ISO 또는 IEC 기술 위원회의 작업에서 명시적으로 다루고 있는 제품 안전 표준은 제외한다.현재 ISO/TC 199 사무국의 직접적인 책임 하에 발행된 표준은 45개며 ISO/TC 199 사무국의 직접적인 책임 하에 개발 중인 표준은 9개다. 참여하고 있는 회원은 26개국, 참관 회원은 25개국이다.□ ISO/TC 199 사무국의 직접적인 책임 하에 발행된 표준 45개 중 15개 목록▷ISO Guide 78:2012 Safety of machinery — Rules for drafting and presentation of safety standards▷ISO 11161:2007 Safety of machinery — Integrated manufacturing systems — Basic requirements▷ISO 11161:2007/Amd 1:2010 Safety of machinery — Integrated manufacturing systems — Basic requirements — Amendment 1▷ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction▷ISO 13849-1:2023 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design▷ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation▷ISO 13850:2015 Safety of machinery — Emergency stop function — Principles for design▷ISO 13851:2019 Safety of machinery — Two-hand control devices — Principles for design and selection▷ISO 13854:2017 Safety of machinery — Minimum gaps to avoid crushing of parts of the human body▷ISO 13855:2010 Safety of machinery — Positioning of safeguards with respect to the approach speeds of parts of the human body▷ISO 13856-1:2013 Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors▷ISO 13856-2:2013 Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars▷ISO 13856-3:2013 Safety of machinery — Pressure-sensitive protective devices — Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices▷ISO 13857:2019 Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs▷ISO 14118:2017 Safety of machinery — Prevention of unexpected start-up□ ISO/TC 199 사무국의 직접적인 책임 하에 개발 중인 표준 9개 목록▷ISO/AWI 12100 Safety of machinery — General principles for design — Risk assessment and risk reduction▷ISO/DIS 12895 Safety of machinery — Identification of whole body access and prevention of associated risk(s)▷ISO/AWI 13849-2 Safety of machinery — Safety-related parts of control systems — Part 2: Guidance for the design and validation▷ISO/AWI TR 13849-3 Safety of machinery — Safety-related parts of control systems — Part 3: Markov model-based PFH calculation▷ISO/FDIS 13855 Safety of machinery — Positioning of safeguards with respect to the approach of the human body▷ISO/FDIS 14119 Safety of machinery — Interlocking devices associated with guards — Principles for design and selection▷ISO/AWI 14122-1 Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means of access between two levels▷ISO/AWI 14159 Safety of machinery — Hygiene requirements for the design of machinery▷ISO/CD TR 21260 Safety of machinery — Mechanical safety data for physical contacts between moving machinery or moving parts of machinery and persons